Airsoft Guns Above £300

If you're looking for a modern AR platform packed with pre-upgraded parts, the Specna Arms SA-P22 PRIME™ MK16 M-LOK M4/AR-15 AEG is exactly that. A high-quality full metal build on the outside with a sleek M-LOK handguard, 20mm Picatinny railed receiver and Specna Arms SAAS angled foregrip pre-installed, the SA-P22 is equally impressive on the inside, equipped with Specna's top-of-the-range internals, which are even better than the previous EDGE 2.0 lineup!

The PRIME™ range is Specna's newest line of AEGs. Taking traditional AEG silhouettes, Specna has revamped the internals with a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II™ Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you're not the type to delve into Airsoft internals but you still want top tier performance, Specna's PRIME™ range was made with you in mind. With a brushless motor, programmable MOSFET, upgraded HOP-up unit and stainless steel tightbore under the hood, you'll never need to upgrade SA-P22 PRIME™ MK16 M-LOK M4/AR-15 AEG!

If you've been holding your breath waiting for KRYTAC's MK3 line to drop, you can breathe a sigh of relief! The KRYTAC EMG BARRETT REC7 MK3 Carbine AEG is the latest REC7 platform release, maintaining the incredible external build quality which made them the base platform for Bolster Armouries incredible ONYX with newly refined internals to squeeze even more performance from KRYTAC's proven components!

If you seek the immersive firing experience and challenging playstyle of a GBBR, the EMG CGS Daniel Defense DDM4® PDW SBR GBBR is worthy of your attention! This compact full metal PDW style AR boasts official licensing from Daniel Defense and full DD trademarks across the design, with awesome replicas of DD's latest furniture and controls.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you plan to use a GBBR in CQB skirmishes, this is probably the best option out there right now without spending thousands and building it yourself. Licenced trademarks, a full metal build packed with steel internal parts with a 6.03mm tightbore to top it off, you won't find another out-of-the-box GBBR with a full-size rifle style bolt as fast as this!

If you seek the immersive firing experience and challenging playstyle of a GBBR, the EMG CGS Daniel Defense DDM4® PDW SBR GBBR is worthy of your attention! This compact full metal PDW style AR boasts official licensing from Daniel Defense and full DD trademarks across the design, with awesome replicas of DD's latest furniture and controls.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you plan to use a GBBR in CQB skirmishes, this is probably the best option out there right now without spending thousands and building it yourself. Licenced trademarks, a full metal build packed with steel internal parts with a 6.03mm tightbore to top it off, you won't find another out-of-the-box GBBR with a full-size rifle style bolt as fast as this!

While it may not be the most practical primary available, nothing lays down firepower quite like the WE23-H Rotary Minigun AEG from WELL PRO. This is the Tripod Mounted version, pre-fitted with a 7mm metric threaded tripod mount on the bottom, ready to dominate any fixed position. The tripod mount also opens up possibilities of building an Airsoft technical (a light vehicle with a mounted weapon). Ambitious techy Airsofters who've been dreaming of riding around on the back of a golf buggy or quad bike showering the enemy team in a torrent of white fury, you need this!

If you haven't already heard, the WELL PRO Minigun series is simply without equal when it comes to rate of fire, hitting out at 36 rounds per second on an 11.1V LiPo battery. With significantly increased capacity, longer barrels and the ability to be mounted to common tripods you may already have in a dusty corner at home, the WELL PRO WE23-H Rotary Minigun AEG; Tripod Mounted adds a new dimension to Airsoft gameplay and makes a fantastic collection centrepiece! 

Forget what you know about the AR36 platform, this 1990s space gun has been revamped for 21st century warfare thanks to Novritsch! The SSR63 A2 is Novritsch's reimagining of the AR36K platform, boasting the same advanced ergonomics as the original platform with a new CNC machined aluminium M-LOK/20mm Picatinny hybrid handguard and 20mm top rail, providing extra strength when compared to the original configuration and keeping things in line with other cutting edge platforms.

On the inside, the SSR63 A2 is equally impressive, boasting a high torque 24K RPM motor combined with a programmable ETU/MOSFET which offers binary trigger, burst mode, pre-cocking and several other less exciting but equally impressive and essential functions to ensure smooth running reliability in the long term. The HOP-up unit is CNC machined for extra precision and a flawless air seal and the HOP-up bucking is provided by Maple Leaf and has a flat contact surface to enhance accuracy and range. This combination of fantastic pre-upgraded internals and a forward-thinking external redesign make the SSR63 one to watch on the skirmish field!

If you're into retro platforms and need something with presence, the S&T Armament M1918A2 BAR AEG fits the bill! An authentic full metal build boasting gorgeous real wood furniture with a beautiful dark finish, this BAR replica is a perfect match for the M1918A2 Browning Automatic Rifle, which served the US Army and Marine Corps throughout World War II and the Korean War until being replaced by the M14 in the early stages of the Vietnam War.

Internally, the BAR uses a unique gearbox shell with a similar shape to the V7 and a unique slider HOP-up adjuster similar to an AK HOP-up. While these parts are unique, the gearbox takes V2/3 spec gears and a V2/3 cylinder head, and the inner barrel, along with all HOP-up components, are TM AEG spec, ready to be tuned to your liking. Being an LMG, the BAR shoots in full-auto only and is remarkably quick in the rate of fire department, closer to a real MG 42 than a real BAR!

If you have an eye for rare, historic platforms or are into WWII reenactment, the S&T M1918A2 BAR will provide the experience you seek with its exceptional build quality and authentic handling. Perfectly suited to a US G.I. loadout but also a great fit for a Clyde Barrow-style 1930s outlaw loadout, the BAR will definitely please any retro firearms fan!

If you play to win, you will need this to keep up! The Well WE23-S Rotary Minigun AEG is a unique design from Well, part of its "PRO" line of high end AEGs. This Airsoft Minigun is constructed primarily from high density polymer to keep the weight manageable, with 5 aluminium outer barrels braced with an aluminium ring at the tip. The Minigun feeds from 1200rnd spring-assisted high-capacity magazines which are wound by the internal motor of the Minigun itself, meaning you can spray and pray without worrying about winding every 3 seconds!

On the inside, Well has equipped this Minigun with the parts it needs to truly dominate the battlefield. The 5 inner barrels are all 6.03mm tightbores, granting a small increase in FPS and improved accuracy potential. The 5 HOP-up units are all independently adjustable, making use of a TDC design with grub screws to apply adjustments. The bearings are 8mm, meaning smooth running and low friction, and the Minigun is also compatible with standard AEG HOP-up buckings and inner barrels, just in case its performance isn't already enough for you!

The Well Minigun has the very real potential to change the game, with an incredible 36 rounds per second on an 11.1V LiPo battery and a monstrous 1200rnd magazine that winds itself. Miniguns have been around before, but this one is smaller, lighter and far more affordable than its rivals. If you have wanted a taste of the Minigun life but held off for one reason or another, with the Well Minigun in your hands you will be happy you waited!

If you're getting bored of the usual M4-shaped AEGs, who can blame you? The Cybergun FN Herstal MK16 SCAR-L 14.5-Inch AEG makes a nice change, boasting full metal construction and licenced trademarks from FN Herstal. Like the real thing, this detailed SCAR replica features ambidextrous fire controls, a monolithic upper receiver made from a single block of aluminium and an advanced multi-adjustable stock offering length of pull adjustment, an adjustable cheek riser and side folding functionality. Make no mistake, this is one of the best SCAR replicas out there when it comes to external quality!

Internally, the SCAR-L is based around VFC's version 2 gearbox, a modified design to allow for ambidextrous selector levers. Inside, we have 18:1 ratio steel gears running on 8mm ball-bearing bushings, reducing friction when compared to solid bushings for a smoother gearbox report when fired. The inner barrel is also a 6.04mm tightbore example, giving the FPS a slight boost thanks to improved air efficiency and improving accuracy potential with high-quality ammo. If you're dreaming of a beast of a SCAR build and want the best externals around, start with the Cybergun FN Herstal MK16 SCAR-L 14.5-Inch AEG!

This Airsoft gun is a replica of the famous L85 / SA80 used by the British Armed Forces as their standard issue rifle. This Airsoft replica is G&G's offering into the L85 replica range, and features their new ETU and MOSFET systems allowing the use of 11.1v LiPo for a reliable rate of fire and easy trigger pull, and to top it all off: electric blowback.

Designed as a replica of the infamous AA-12 fully automatic shotgun, this high quality AEG Airsoft shotgun has a trick up its sleeve – or barrel, as it has three simultaneously firing individual barrels, each with adjustable Hop-up units.

If you're into retro loadouts and need the most authentic Mk 18 MOD 0 build around, you've just found it! The CYMA CGS Colt Mk 18 MOD 0 10.5" GBBR boasts official licencing from Colt via Cybergun and is a flawless replica of the original Mk 18, even down to the correct M16A1 lower receiver and 10.3-inch barrel setup.

Inside, the Mk 18 MOD 0 is significantly upgraded, packing a steel bolt carrier, steel trigger group parts, steel bolt catch and adjustable hammer; allowing you to tune power to get right within site limits. Also inside is a 6.03mm tightbore inner barrel, giving you an accuracy edge when compared to standard 6.08mm bores. Being based on the TM ZET system internal design, this thing will shoot like a beast, with even heavier recoil than the original TM!

Following in the footsteps of the Krytac Kriss Vector Alpine Edition we are proud to introduce the Krytac EMG P90; Alpine Special Edition. This unique P90 variant has an eye-catching new look and brings plenty of modern functionality to the table as a bonus thanks to its redesigned modular upper receiver/optics bridge assembly. As with the original Krytac P90, this variant boasts full licencing from FN Herstal via Cybergun, but unlike the original, this P90 takes a walk on the wild side when it comes to external design!

Inside we are treated to the best the P90 platform has to offer, just like the previous P90 from Krytac. The trigger has been enhanced and now has a super short trigger travel with full adjustability, the upgraded internals are kept in check by the Krytac Nautilus MOSFET and a 30K RPM high torque motor delivers the power needed to provide a super snappy trigger response and a remarkable rate of fire. If you like your P90s minty fresh on the outside and a cold killer on the inside, this one should suit you!

If you want to ensure victory, you need this. The WELL PRO WE23-Plus Rotary Minigun is part of its "PRO" line of high-end AEGs. This Airsoft Minigun is constructed primarily from high-density polymer to keep the weight manageable, with 5 aluminium outer barrels braced with an aluminium ring at the tip. The Minigun feeds from 2800rnd spring-assisted high-capacity magazines which are wound by the internal motor of the Minigun itself, meaning you can spray and pray without worrying about winding every 3 seconds!

On the inside, Well has equipped this Minigun with the parts it needs to truly dominate the battlefield. The 5 inner barrels are all 6.03mm tight bores, granting a small increase in FPS and improved accuracy potential. The 5 HOP-up units are all independently adjustable, making use of a rotary design for each barrel to apply adjustments. The bearings are 8mm, meaning smooth running and low friction, and the Minigun is also compatible with standard AEG HOP-up buckings and inner barrels, just in case its performance isn't already enough for you!

The Well Minigun has the very real potential to change the game, with an incredible fire rate on an 11.1V LiPo battery and a monstrous 2800rnd magazine that winds itself. Miniguns have been around before, but this one is smaller, lighter and far more affordable than its rivals. If you have wanted a taste of the Minigun life but held off for one reason or another, with the Well Minigun in your hands you will be happy you waited!

If CQB is your poison, or you have limited space in your kit bag, you are going to love this one! The CM.106 AR-9 PDW from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106 PDW sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.

If you have a thing for modernised American AKs, this one should be up your street! The EMG Rifle Dynamics RD-701 AEG; Kestrel Basic ETU is absolutely packed with pre-upgraded internal parts and boasts licensed trademarks from Rifle Dynamics with detailed replica Rifle Dynamics parts across the design. Boasting some incredible pre-upgraded parts from the CYMA Platinum Edition rifles, this AK variant is absolutely devasting in-game and to make matters all the sweeter is equipped with an internal tracer unit mounted to the HOP-up and powered by the AEG's battery.

The tracer HOP-up is a rare addition to stock Airsoft rifles, usually a rare innovation only found on the aftermarket and requiring a certain amount of expertise to wire in. An impressive feature made even better in combination with this RD-701's other upgraded parts and flawless build quality. The RD-701 boasts full metal construction with a large proportion of steel in the build, a 6.03mm tightbore inner barrel, a high-speed Neodymium magnet motor and much, much more!

so, if you fancy treating yourself to an AK platform, the EMG Rifle Dynamics RD-701 AEG is a great high-performance option, plus, its party trick of lighting up tracer BBs without an aftermarket tracer unit required!

If you know real steel and like the NOVESKE aesthetic, you need to check this out! The EMG Noveske 13.7" Gen.3 INFIDEL AEG; Kestrel Basic ETU is a longer version of similar rifles like the DIPLOMAT and is is a perfect replica of the real steel Noveske Infidel Gen.3, a dynamic modern rifle beloved for its style and superior performance.

On the outside, we are treated to a full metal build with flawlessly engraved Noveske trademarks, a detailed replica of the Noveske KX3 Firepig flash suppressor, NSR 9" M-LOK handguard and "Super Badass" charging handle and the iconic Noveske silver outer barrel to add a hint of contrast to this high-end AR build.

Internally, the INFIDEL is equipped with the legendary CYMA Platinum internals, complete with the Kestral Basic ETU, just to top it off. For superior performance, this AEG is equipped with 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.03mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades. It comes straight out of the box laser accurate and lightning fast!

If you know real steel and like the NOVESKE aesthetic, you need to check this out! The EMG Noveske 13.7" Gen.3 INFIDEL AEG; Kestrel Basic ETU is a longer version of similar rifles like the DIPLOMAT and is is a perfect replica of the real steel Noveske Infidel Gen.3, a dynamic modern rifle beloved for its style and superior performance.

On the outside, we are treated to a full metal build with flawlessly engraved Noveske trademarks, a detailed replica of the Noveske KX3 Firepig flash suppressor, NSR 9" M-LOK handguard and "Super Badass" charging handle and the iconic Noveske silver outer barrel to add a hint of contrast to this high-end AR build.

Internally, the INFIDEL is equipped with the legendary CYMA Platinum internals, complete with the Kestral Basic ETU, just to top it off. For superior performance, this AEG is equipped with 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.03mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades. It comes straight out of the box laser accurate and lightning fast!

If you're in the market for a MK18 and you want the latest version, the EMG Daniel Defense DD4™ MK18 RIII 10.3" AEG is exactly what you need! This full metal M4/AR-15 AEG boasts official licensing from Daniel Defense and is a perfect match for the latest MK18 style rifle in the DD4™ series, including flawless replicas of the MK18 RIS III handguard, the "Grip-N-Rip" charging handle, "Tornado" pistol grip and DD Buttstock. This thing is all Daniel, and we love it!

This beast is manufactured by CYMA Platinum for EMG, meaning we are treated to some of the best out-of-the-box internals around. Inside, you will find a high-speed Neodymium magnet motor driving a 13:1 CNC steel high-speed gearset running on 8mm ball bearing bushings, kept in check by the CYMA Platinum MOSFET. The cylinder and piston heads are both the silent types, CNC machined from aluminium for maximum strength and flawless air seal. The inner barrel is also a 6.03mm tightbore, giving you an accuracy edge and the ability to challenge long rifles in the great outdoors.

The highlight of this AEG is the Kestrel Basic ETU, which offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency. Whether you're a Daniel Defense fan or looking for a modern, M-LOK-equipped platform with gorgeous ergonomic furniture and build quality to rival the best, or you need a pre-upgraded beast of a primary, the Daniel Defense DD4™ MK18 RIII 10.3" AEG; Kestrel Basic ETU from EMG is perfectly suited to your needs!

If you're into the 416 vibe but want something more modern and swift to point, the Specna Arms SA-PH22 PRIME™ M-416 RAHG 14.5" AEG is one to watch. Part of Specna's impressive PRIME™ range, the SA-PH22 is packed with pre-upgraded parts and designed to compete with the very best Airsoft has to offer, with no need for additional upgrades or tuning. Some of these upgrades include a powerful Dark Matter™ brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings, CNC aluminium cylinder group parts and a reinforced tappet plate for reliable feeding.

The PRIME™ is Specna's newest line of AEGs. They have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to enhance performance, improve consistency and increase rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET!

A sleeker, more agile alternative to the hefty quad-rail equipped 416, the Specna Arms SA-PH22 PRIME™ M-416 RAHG 14.5" AEG is certain to turn heads on the field, even more so when you shoot it! If you're after an ultra-modern AR setup with pre-upgraded internals to rival the best, the SA-PH22 is the ideal choice!

If you're into the Daniel Defense look but want something a bit different, check out the EMG Daniel Defense DDM4® V7 AEG! Based on the real steel DDM4 V7P, this M4/AR-15 AEG is rocking a unique folding stock adapter inspired by the real steel LAW Tactical folding stock, meaning it can fit into smaller gun bags and can cut corners tighter than other ARs, ideal for CQB!

Up front, we have a fantastic replica of the real steel DD MRF 9.0, a dynamic free-floated M-LOK handguard made from CNC aluminium and bristling with licenced Daniel Defense trademarks. The receiver also sports finely engraved DD markings and is equipped with the EMG Alpha 19 ergonomic grip, a comfortable grip design made from superb quality high density polymer. 

Inside, we have the APS Silver Edge II gearbox, a V2 gearbox equipped with 18:1 CNC steel gears, a polymer piston with a full steel tooth rack, a double O-ring cylinder head and stainless steel cylinder. The spring guide is a quick change example, allowing for easy power tuning, and the motor is a 24K high torque, meaning a snappy response rate and respectable rate of fire. Also inside is the APS Micro-FET, an in-line MOSFET designed to prevent trigger lockups and improve electrical efficiency, translating into even more speed downrange. 

Whether you have limited space, like folding things or want a licenced Daniel Defense AR AEG which no-one else has, the EMG Daniel Defense DDM4® V7 AEG should be in your sights! Well equipped both inside and out with a super unique folding stock no other AR has, the DDM4 V7 is the MK18's dynamic-looking, speedy brother!

The Sterling MK5 (L34A1) is a later adaptation of the Sterling Submachine Gun, that was issued to small patrols for covert engagement and ambushes. This Electric-Powered Airsoft Replica of the Gun is constructed from Steel and Real Wood for an incredibly realistic experience, and features an externally-accessible Rotary HOP Unit for excellent lift on your BBs and easy adjustment.

This is the next Generation of Fully Automatic Tri-Barreled Shotguns, which takes everything great about the Tokyo Marui SledgeHammer, and cranks it up to 11.

If you've got a thing for pistols in body kits, this gun probably already has your attention. This gun is based on the G&G GTP9 Gas Blowback Airsoft pistol, but with a complete replacement upper receiver to make the ultimate CQB carbine with plenty of kick, noise, and performance. If you think this is just another Gas Blowback, you're mistaken, this is going to change your CQB game.

If you're looking for an AEG packed with pre-upgraded parts based on a cutting-edge real steel design, the Specna Arms SA-PH23 PRIME™ M-416 RAHG 10" AEG should be right up your street! Building on the previous EDGE 2.0 variant, the internals of the SA-PH23 have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful Dark Matter™ brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The PRIME™ is Specna's newest line of AEGs. They have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET!

An advanced platform both inside and out, the M-416 RAHG is ideal for US Navy SEAL Operation Neptune Spear loadouts or any other modern special forces loadout, bringing high-end looks along with insane performance to the table. If you're after an eye-catching AR-derived AEG with internals to contend with the best, the Specna Arms SA-PH23 PRIME™ M-416 RAHG 10" AEG belongs in your arsenal!

Where my milsim bois at? The East Crane EC-202 M-417 DMR is the marksman rifle you have been looking for, whether you run a UKSF, Delta or any other SF loadout! Boasting full metal construction, a quick change spring system and a programmable MOSFET capable of semi-automatic only, the EC-202 is ready for whatever role you place it in, but we think it would make a beast of a DMR!

With a 6.04mm Tightbore inner barrel, rotary HOP-up unit, version 2.5/version 2 long gearbox and CHONKY 7.62x51mm style magazines, the EC-202 is kitted out for long range skirmishing, whether you push it up to DMR limits or not. On the outside, we have more 20mm Picatinny rails than we will ever need, a 14mm CCW male threaded barrel, ready for a suppressor or tracer and a snag-reducing low-profile stock with full adjustability for ease of movement. Wack a big scope on this bad boy and get to work!

This Airsoft gun is a replica of the famous L85 / SA80 used by the British Armed Forces as their standard issue rifle. This Airsoft replica is G&G's offering into the L85 replica range, and features their new ETU and MOSFET systems allowing the use of 11.1v LiPo for a reliable rate of fire and easy trigger pull, and to top it all off: electric blowback.

If you're a realism seeker looking for the next step up from an AEG, the WE M4A1 Open Bolt GBBR; V3 System has your name on it! A considerable improvement over the previous WE Open Bolt M4 GBBR, the V3 improves reliability with choice steel internals, reinforcement in key places and a full internal redesign resulting in better rapid fire performance and long-term durability.

The most notable redesigns are its steel valve knocker and steel bolt catch contact surface, solving known issues with WE's previous designs and avoiding the immediate need for upgrades or bodge jobs. The trigger group has also been considerably reinforced, but the inner barrel and HOP-up bucking are still GBB/VSR spec, giving you access to some of the best upgrade parts in the business if you want to improve accuracy and range. The stock inner barrel is also now a 6.04mm tightbore, replacing the 6.08mm standard bore barrel of the previous version.

If you prioritise realism and like to work hard in-game like the real warriors do, the WE M4A1 Open Bolt GBBR; V3 System should be on your shopping list. With realistic 30-round magazines, violent recoil and a manual of arms almost identical to the real M4A1, this is a primary for the pros!

If you're into WW2 reenactment or like to collect the most iconic firearms replicas around, the A&K M1 Garand AEG belongs in your arsenal! A gorgeous replica made entirely from metal and real wood, this hefty, authentic piece is a bit of a rarity on Airsoft fields but comes with more than its fair share of performance perks!

Inside, the M1 is based around a TM spec version 7 gearbox with an alloy shell, 18:1 ratio steel gears, 6mm bushings and a quick change spring guide for easy power tuning. The inner barrel is a 6.05mm tightbore for an accuracy and air-efficiency edge, and the HOP-up unit is an alloy rotary design, offering easier adjustments than the TM M14 it is based on, with full aftermarket AEG HOP-up bucking and inner barrel compatibility.

As suitable for display on the man-cave wall as it is for sending semi-auto shots out to range in a reenactment scenario, this detailed and hefty M1 Garand replica fills a niche which is often underserved in Airsoft. If you're working on a WW2 US G.I. loadout or need an impressive looking M1 to fill out the gun wall, the A&K M1 Garand AEG; Real Wood is just the thing!

Introducing the latest version of the Evolution Airsoft E-416 AEG, in compact 10" barreled form for up close and personal work. The E-416 CQB sports the usual Evolution Airsoft upgraded internals, now with their latest ETU, the ETS III pre-installed. The E-416 CQB 10"  is equipped with a high torque motor, 6.01mm tight bore inner barrel with the latest rotary adjustable HOP-up unit, and a quick change spring system, granting you flexibility without having to mess with the finely tuned internals. The ETS III adds some major functionality to the platform, enabling a plethora of advanced functions including burst mode, binary trigger and ramping automatic fire, all of which can be programmed using the fire controls on the weapon itself!