All Airsoft Guns

Here's a pistol we all know and love. NUPROL brings us aniconic classic Airsoft replica, still widely in use today by a variety of countries for both service and recreational shooting.

A reliable gas blowback pistol, with a lightweight polymer frame and tough alloy slide, this is a go-to tried-and-true pistol for many Airsofters.

If you're just getting started on your Airsoft journey and don't want to get in too deep straight away, the CYMA CM.517 M4 Combat Machine AEG is a fine choice. This battery-powered Airsoft AEG is constructed almost entirely from high-density ABS polymer with an alloy outer barrel and alloy version 2 gearbox, keeping the build lightweight and agile, not to mention cost-effective. While it weighs practically nothing (only 1.7kg!), the CM.517 doesn't feel flimsy thanks to its use of high-density ABS polymer. Inside we are treated to surprisingly well-equipped internals, offering respectable performance in both outdoor and indoor skirmishes.

The alloy version 2 gearbox the CM.517 is based around is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

Externally, the CM.517 is absolutely mission-ready, equipped with a 20mm Picatinny quad rail handguard and 20mm railed receiver, ready for any 20mm Picatinny accessories you need, from red dot sights and scopes to vertical foregrips, laser aiming modules and tactical flashlights. The alloy outer barrel is rocking 14mm CCW male threads, meaning you can add a tracer unit to make your BBs glow or a suppressor for sneaky styling. If you're ready to get into the sport with an affordable, reliable and competitive platform for a great price, the CYMA CM.517 M4 Combat Machine AEG is a fantastic choice!

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping.

A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping.

A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping.

A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping.

The VMP-1 platform is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1 makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor mounting system built into the muzzle itself.

If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1 is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!

A Gas Blowback Pistol from NUPROL's RAVEN series which features a custom Hydro-Dipped skin, integrated Red Dot Sight, Low-Light Ironsights and a Tactical Rail Slot to offer the ultimate out-of-the-box tactical sidearm for Airsoft skirmishing.

A Gas Blowback Pistol from NUPROL's RAVEN series which features a custom Hydro-Dipped skin, integrated Red Dot Sight, Low-Light Ironsights and a Tactical Rail Slot to offer the ultimate out-of-the-box tactical sidearm for Airsoft skirmishing.

If you love the John Wick look but want to skirmish in the cold, this is the JW3 pistol you need! The EMG CM.138 TTI JW3 Hi-Capa Combat Master AEP boasts official licencing from Taran Tactical Innovation which, of course, means gorgeous authentic TTI trademarks across the design. Being an AEP, this JW3 does not have a moving slide and is powered by an internal battery, meaning solid cold-weather performance keeping it on the field long after GBBs have gone into hibernation!

As much a looker as the GBB version, the JW3 AEP is internally based around the Tokyo Marui AEP gearbox design, enhanced with steel gears running on steel ball-bearing bushings. This improves trigger response and rate of fire while giving the JW3 a much smoother firing noise than other AEPs, not to mention a longer lifespan due to reduced stress on the gearbox shell.

Also inside is CYMA's AEP MOSFET, allowing 7.4V LiPo batteries to be used for a genuinely competitive semi-auto response rate and respectable full-auto fire rate, ideal for snipers looking for a compact and reliable backup platform or pistol aficionados wanting to skirmish to full effect without worrying about GBB cool-down in winter. If you're still wearing your tux when the frost sets in, the EMG CM.138 TTI JW3 Hi-Capa Combat Master AEP belongs in your holster!

The first Airsoft replica of an AR-9, the real-steel AR15 rifle receiver chambered in 9mm pistol ammunition. AR-9 pistols and carbines have become extremely popular in the United States, due to their modularity, familar AR15 style controls, and compact nature. The G&G ARP9 is constructed from high-density polymer with an aluminium M-LOK handguard and includes a compact PDW stock, making this AEG a great choice as a CQB primary for those who want a more modern, high-speed submachine gun with an aggressive design aesthetic.

An Airsoft 6mm replica SMG-5 SD6, manufactured by Jing Gong. Comes supplied with an integrated suppressor for looks and to slightly dampen muzzle report.

If you're just starting your Airsoft journey and looking for an affordable lightweight polymer build M4/AR-15 AEG with programmable fire controls, the Delta Armory DA-C05-EGL CHARLIE™ Silent Ops 7 M4/AR-15 AEG is what you need. This M4/AR-15 AEG boasts the latest MOSFET/ETU system from Delta Armory, known as the EAGLE™.

The internals of the DA-C05-EGL are similar to the original CHARLIE™ series, but the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced primary, for an entry-level price!

For those seeking a lightweight, yet advanced starter AEG with reinforced internal parts and full compatibility with aftermarket M4/AR-15 AEG upgrades, the Delta Armory DA-C05-EGL CHARLIE™ Silent Ops 7 M4/AR-15 AEG is one to watch!

If you're just starting your Airsoft journey and looking for an affordable lightweight polymer build M4/AR-15 AEG with programmable fire controls, the Delta Armory DA-C05-EGL CHARLIE™ Silent Ops 7 M4/AR-15 AEG is what you need. This M4/AR-15 AEG boasts the latest MOSFET/ETU system from Delta Armory, known as the EAGLE™.

The internals of the DA-C05-EGL are similar to the original CHARLIE™ series, but the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced primary, for an entry-level price!

For those seeking a lightweight, yet advanced starter AEG with reinforced internal parts and full compatibility with aftermarket M4/AR-15 AEG upgrades, the Delta Armory DA-C05-EGL CHARLIE™ Silent Ops 7 M4/AR-15 AEG is one to watch!

If you're just starting your Airsoft journey and looking for an affordable lightweight polymer build M4/AR-15 AEG with programmable fire controls, the Delta Armory DA-C05-EGL CHARLIE™ Silent Ops 7 M4/AR-15 AEG is what you need. This M4/AR-15 AEG boasts the latest MOSFET/ETU system from Delta Armory, known as the EAGLE™.

The internals of the DA-C05-EGL are similar to the original CHARLIE™ series, but the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced primary, for an entry-level price!

For those seeking a lightweight, yet advanced starter AEG with reinforced internal parts and full compatibility with aftermarket M4/AR-15 AEG upgrades, the Delta Armory DA-C05-EGL CHARLIE™ Silent Ops 7 M4/AR-15 AEG is one to watch!

If you've got your ear to the ground on the latest Airsoft releases, you can't have missed the LevAR 15" from G&G! This innovative platform is powered by green gas, making use of G&G M4/AR-15 AEG upper receivers providing almost unlimited customisation options and the chance to make this lever action "Space Cowboy" rifle truly yours.

The LevAR 15" is confirmed to be compatible with G&G M4 AEG upper receivers, allowing you to configure it how you want, from a long sniper rifle-style setup to a compact and agile scout rifle perfect for mobile marksmen. Powered by green gas using an internal gas reservoir, the LevAR 15" also boasts a 1913/20mm Picatinny stock interface, meaning the stock can be swapped or removed entirely. Now we have a sample LevAR-15 in our hands, we can confirm that the 1913 interface is set at an angle, so aftermarket 1913 stocks will fit but look funky. We expect G&G will release a range of specific stocks for this interface so stay tuned for more intel!

Our batch of LevAR 15" Gas Powered Lever Action Rifles is due later this year, so sign up for an email stock alert and get in before the rush if you want to be one of the first in the country running this beast. If you need more information before you make the call, check out the full description for all the nitty gritty details!

If you've got your ear to the ground on the latest Airsoft releases, you can't have missed the LevAR 15" from G&G! This innovative platform is powered by green gas, making use of G&G M4/AR-15 AEG upper receivers providing almost unlimited customisation options and the chance to make this lever action "Space Cowboy" rifle truly yours.

The LevAR 15" is confirmed to be compatible with G&G M4 AEG upper receivers, allowing you to configure it how you want, from a long sniper rifle-style setup to a compact and agile scout rifle perfect for mobile marksmen. Powered by green gas using an internal gas reservoir, the LevAR 15" also boasts a 1913/20mm Picatinny stock interface, meaning the stock can be swapped or removed entirely. Now we have a sample LevAR-15 in our hands, we can confirm that the 1913 interface is set at an angle, so aftermarket 1913 stocks will fit but look funky. We expect G&G will release a range of specific stocks for this interface so stay tuned for more intel!

Our batch of LevAR 15" Gas Powered Lever Action Rifles is due later this year, so sign up for an email stock alert and get in before the rush if you want to be one of the first in the country running this beast. If you need more information before you make the call, check out the full description for all the nitty gritty details!

If you have got your eye on an AR-9, Lancer Tactical just made the choice that bit harder! The LT-35 Battle X 9mm PDW is intended to be a lightweight platform for aggressive run and gun playstyles and is equipped with Lancer's Gen.2 internals, including a high torque motor, 6.03mm tightbore inner barrel and a well equipped version 2 gearbox with some choice reinforced parts.

The LT-35 is constructed almost entirely from high density nylon polymer, making it as solid as a rock and as light as a feather; a sure choice for any skirmisher who likes to move fast with minimal baggage. Its modern external design wants for nothing in the realm of accessorising, offering a railed receiver, M-LOK handguard and 14mm CCW male threaded barrel, meaning options are endless when it comes to kitting the Battle X out. The ARP9 looks worried!

If you have got your eye on an AR-9, Lancer Tactical just made the choice that bit harder! The LT-35 Battle X 9mm PDW is intended to be a lightweight platform for aggressive run and gun playstyles and is equipped with Lancer's Gen.2 internals, including a high torque motor, 6.03mm tightbore inner barrel and a well equipped version 2 gearbox with some choice reinforced parts.

The LT-35 is constructed almost entirely from high density nylon polymer, making it as solid as a rock and as light as a feather; a sure choice for any skirmisher who likes to move fast with minimal baggage. Its modern external design wants for nothing in the realm of accessorising, offering a railed receiver, M-LOK handguard and 14mm CCW male threaded barrel, meaning options are endless when it comes to kitting the Battle X out. The ARP9 looks worried!

If you love the standard issue US Army M4A1 carbine, this should suit you! The Delta Armory DA-C03 CHARLIE™ M4A1 RAS AEG is styled after the M4A1 as it is issued to the US Army, featuring a RAS style quad 20mm railed handguard, M4A1 barrel profile with M203 cutout and the iconic AR-15 triangular front sight, along with some thoughtful modern ergonomic enhancements to improve handling. 

On the outside, Delta has added a gunfighter mod.3 style ergonomic pistol grip and the awesome Delta Armory battery stock and enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. As a replica of the Delta Armory CHARLIE™ line, the DA-C03 is constructed primarily from high density polymer with alloy trim parts to provide manageable weight and maintain peak agility in game. 

On the inside, the DA-C03 is kitted out with a tightbore inner barrel, a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. Needless to say, this platform is superb value considering its features and is the perfect AEG for a new skirmisher who wants a cost-effective primary without any performance compromises!

If you're looking for a sniper rifle with more than its fair share of robust internal components, the Delta Armory M24 R700 Spring Bolt Action Sniper Rifle is a fine choice. Externally based on the real steel M24 sniper rifle hybridized with the R700 sporting rifle, Delta's M24 is designed for mobility, keeping weight to an absolute minimum and trimming off any unnecessary frills which add more weight than their worth.

Inside, we are equipped with a CNC Steel cylinder, CNC aluminium piston, 90-degree sear and CNC steel spring guide, giving you the parts you need to keep the M24 running in the long run and avoiding the usual affordable sniper rifle hurdle of whacking a super strong spring into a platform that isn't ready for it. Though the M24 may use its own unique internal system, the HOP-up rubber is compatible with aftermarket VSR/GBB rubbers so the upgrade fiends can get their fix. If you want to sample sniping but don't want to get in too deep with an expensive primary, the Delta Armory M24 R700 Spring Bolt Action Sniper Rifle is a fantastic option!

If you like to stand out on the skirmish field wielding something other than an M4 platform, the Cybergun FN Herstal SCAR-L AEG w/ EFCS MOSFET should suit you perfectly! This full-metal MK16 SCAR-L replica features licenced FN Herstal trademarks across the design, a dead-on match for the real SCAR-L. Externally, this SCAR-L is about as good as it gets, boasting a monolithic CNC aluminium upper receiver and fantastic quality polymer parts, a significant step up from most other SCAR replicas out there.

Inside, we are equipped with the ARES EFCS gearbox and MOSFET system, providing a lightning-fast trigger response in semi-auto along with programmable fire controls via the ARES EFCS Programming Box (available separately). The gearbox itself is rocking 18:1 ratio steel gears and a quick change spring system driven by a high torque slim motor housed in the ultra-realistic ARES slim motor grip.

The slim grip provides the most realistic handling experience an AEG can, matching the dimensions of real steel AR-15 grips and completely transforming the feel of the Cybergun SCAR-L into the realm of GBBR realism. If you're seeking a SCAR with flawless externals and well-equipped internals, the Cybergun FN Herstal SCAR-L AEG w/ EFCS MOSFET will do the trick!

If you like to stand out on the skirmish field wielding something other than an M4 platform, the Cybergun FN Herstal SCAR-L AEG w/ EFCS MOSFET should suit you perfectly! This full-metal MK16 SCAR-L replica features licenced FN Herstal trademarks across the design, a dead-on match for the real SCAR-L. Externally, this SCAR-L is about as good as it gets, boasting a monolithic CNC aluminium upper receiver and fantastic quality polymer parts, a significant step up from most other SCAR replicas out there.

Inside, we are equipped with the ARES EFCS gearbox and MOSFET system, providing a lightning-fast trigger response in semi-auto along with programmable fire controls via the ARES EFCS Programming Box (available separately). The gearbox itself is rocking 18:1 ratio steel gears and a quick change spring system driven by a high torque slim motor housed in the ultra-realistic ARES slim motor grip.

The slim grip provides the most realistic handling experience an AEG can, matching the dimensions of real steel AR-15 grips and completely transforming the feel of the Cybergun SCAR-L into the realm of GBBR realism. If you're seeking a SCAR with flawless externals and well-equipped internals, the Cybergun FN Herstal SCAR-L AEG w/ EFCS MOSFET will do the trick!

The lightning-fast Delta Armory FREYA™ series is back and better than ever in its Gen.2 form! Boasting all of the best bits of the original FREYA™ including dynamic, weight-reduced skeletonised externals and the advanced EAGLE™ programmable MOSFET/ETU system, Delta has gone all the way with the FREYA™ Gen.2 and fitted it with the best internals from the ETU series, resulting in the most well-equipped Delta Armory platform yet released!

Inside the version 2 gearbox, we are treated to CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The presence of the EAGLE MOSFET with its semi-auto lock function, a quick change spring system and a high torque motor make the R15 FREYA™ Gen.2 14" a fine base gun for a DMR build but equally useful for outdoor skirmishes straight out of the box. If you're looking for a uniquely styled M4/AR-15 AEG which handles like a dream and is very well equipped internally, the Delta Armory R15 FREYA™ Gen.2 14" M-LOK M4/AR-15 AEG is one of the best options out there!

The lightning-fast Delta Armory FREYA™ series is back and better than ever in its Gen.2 form! Boasting all of the best bits of the original FREYA™ including dynamic, weight-reduced skeletonised externals and the advanced EAGLE™ programmable MOSFET/ETU system, Delta has gone all the way with the FREYA™ Gen.2 and fitted it with the best internals from the ETU series, resulting in the most well-equipped Delta Armory platform yet released!

Inside the version 2 gearbox, we are treated to CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The presence of the EAGLE MOSFET with its semi-auto lock function, a quick change spring system and a high torque motor make the R15 FREYA™ Gen.2 14" a fine base gun for a DMR build but equally useful for outdoor skirmishes straight out of the box. If you're looking for a uniquely styled M4/AR-15 AEG which handles like a dream and is very well equipped internally, the Delta Armory R15 FREYA™ Gen.2 14" M-LOK M4/AR-15 AEG is one of the best options out there!

The lightning-fast Delta Armory FREYA™ series is back and better than ever in its Gen.2 form! Boasting all of the best bits of the original FREYA™ including dynamic, weight-reduced skeletonised externals and the advanced EAGLE™ programmable MOSFET/ETU system, Delta has gone all the way with the FREYA™ Gen.2 and fitted it with the best internals from the ETU series, resulting in the most well-equipped Delta Armory platform yet released!

Inside the version 2 gearbox, we are treated to CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The presence of the EAGLE MOSFET with its semi-auto lock function, a quick change spring system and a high torque motor make the R15 FREYA™ Gen.2 14" a fine base gun for a DMR build but equally useful for outdoor skirmishes straight out of the box. If you're looking for a uniquely styled M4/AR-15 AEG which handles like a dream and is very well equipped internally, the Delta Armory R15 FREYA™ Gen.2 14" M-LOK M4/AR-15 AEG is one of the best options out there!

If you like pistols with presence, the Desert Eagle must be on your mind! The Cybergun Desert Eagle .50AE CO2 GBB Pistol is a detailed replica of the original Deagle, Hollywood's favourite pistol and a true hand cannon when compared to a normal semi-auto sidearm. Powered by CO2 and equipped with a TDC grub screw adjustable HOP-up, this beast outdoes almost any gas blowback pistol in the recoil department and is a decent shooter at range as a bonus!

This Desert Eagle is constructed with an alloy slide and outer barrel paired with a high-density polymer frame and grip panels, giving it significant heft and seriously powerful recoil along with its full complement of licenced IMI/Magnum Research trademarks. Affordable, realistic and a real head-turner in game, the Cybergun Desert Eagle .50AE CO2 GBB Pistol is a must-have for those who want to rock one of the most iconic pistols in popular culture!

If military-style M4s are your poison and you need a new platform for close quarters, the DA-C02 CHARLIE™ M4/AR-15 CQBR AEG is a sure choice. This AEG is styled after the CQBR (Close Quarters Battle Receiver) configuration of the M4A1 rifle, a drop-in upper receiver kit issued to Army Rangers, Delta Force and Navy Seals, fitted with a 10.5-inch outer barrel and KAC RAS Style quad railed handguard.

To furnish the CQBR M4 configuration with some modern ergonomics, Delta has added a gunfighter mod.3 style pistol grip and the awesome Delta Armory battery stock and enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. As a replica of the Delta Armory CHARLIE™ line, the DA-C02 is constructed primarily from high density polymer with alloy trim parts to provide manageable weight so you can make energetic advances all day long.

Internally, the DA-C02 is generously kitted out with a tightbore inner barrel, a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. If you need a solid, lightweight workhorse of an M4 platform with plenty of future upgrade and customisation options, the DA-C02 CQBR is exactly that. A platform this price has no business being so good straight out of the box!

If military-style M4s are your poison and you need a new platform for close quarters, the DA-C02 CHARLIE™ M4/AR-15 CQBR AEG is a sure choice. This AEG is styled after the CQBR (Close Quarters Battle Receiver) configuration of the M4A1 rifle, a drop-in upper receiver kit issued to Army Rangers, Delta Force and Navy Seals, fitted with a 10.5-inch outer barrel and KAC RAS Style quad railed handguard.

To furnish the CQBR M4 configuration with some modern ergonomics, Delta has added a gunfighter mod.3 style pistol grip and the awesome Delta Armory battery stock and enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. As a replica of the Delta Armory CHARLIE™ line, the DA-C02 is constructed primarily from high density polymer with alloy trim parts to provide manageable weight so you can make energetic advances all day long.

Internally, the DA-C02 is generously kitted out with a tightbore inner barrel, a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. If you need a solid, lightweight workhorse of an M4 platform with plenty of future upgrade and customisation options, the DA-C02 CQBR is exactly that. A platform this price has no business being so good straight out of the box!

If you want to start your Airsoft adventure with a realistic full metal platform or you have your eye on an MK18 MOD.1, the Delta Armory MK18 MOD.1 ALPHA™ should suit you! This AEG is based on the standard issue rifle of the US Navy SEALs but with some modern external enhancements mimicking high-end civilian tactical setups. 

Being an AEG of the ALPHA™ line, this MK18 MOD.1 is considerably pre-upgraded straight out of the box, boasting a reinforced gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness. 

With more Picatinny rails than you'll ever need, a unique modern receiver design and the impressive Delta Armory battery stock, the MK18 MOD.1 ALPHA™ is perfect for skirmishers who want the realistic feel of full metal and the performance to back it up!

If you've been keeping up with anything Airsoft, you must be excited about this one! The Vorsk VMP-2D is here and this gas blowback DMR rifle is a game changer. Out of Vorsk's new line, this variant is the big boy, the full-fat DMR version. Equipped with a longer M-LOK handguard, extended outer barrel, and marksman stock with an adjustable cheek riser, this is the VMP-2 for long-range specialists. With a locked semi-auto function, this rifle delivers precise shots at up to 450 FPS with 0.2g BBs, making it a powerful choice for any marksman.

The VMP-2 is compatible with standard VMP-1/MP9 magazines and makes use of a unique chassis system with QD sling sockets on each side. It is compatible with M4/AR-15 GBBR pistol grips and features mounts for the prolific M4/AR-15 buffer tube at the rear. The D variant features a fixed marksman-style stock with an adjustable cheek riser which is exactly what you need to get a good view of your target down a rifle scope!

The HOP-up unit has a unique design with an external TDC adjuster, perfect for convenient mid-game setting changes to keep up with the versatile conditions, not to mention being an inherently accurate and precise design. The HOP-up bucking and inner barrel are also VSR-10 spec, giving you almost unlimited options for tuning performance to meet your needs.

If you are working on your Special Forces loadout but you haven't had time to hit the gym, Delta Armory has the MK18 for you! The DA-B15-ETU BRAVO™ is styled to match the real MK18 MOD.1 rifle issued to US Navy SEALs and Delta Force but is far lighter and handier than full metal versions thanks to its combination of a CNC aluminium handguard and alloy outer barrel with a high density polymer receiver and buffer tube. 

Inside, this MK18 MOD.1 is rather special, being fully upgraded internally with little room for more. Inside, we are treated to a plethora of CNC machined aluminium parts, CNC steel 16:1 gears, a high torque motor and a programmable ETU/MOSFET system to keep it all in check. The ETU also allows for burst mode and binary trigger to be programmed in, along with pre-cocking for an almost instantaneous trigger response. If you want the looks of the MK18 without the weight, the DA-B15-ETU BRAVO™ brings the MK18 styling along with incredible performance!

If you're looking for a specialised entry tool as the pointman for your team, you can't ask for much better than the BO Dynamics FABARM STF 12 Short Initial Pump-action Gas Shotgun. This licenced replica of the real steel STF 12 Short Initial boasts full metal construction and the choice of either 3 or 6 BBs per trigger pull, giving you a shotgun-like spread which is perfect for engaging fast-moving targets and getting the first kill as your team breaches a room in CQB.

The real steel STF 12 is Italian-made, meaning it comes with quite the pedigree as a shotgun from the land of high-end, world-beating shotguns. The STF 12 roughly follows the same external layout as the M870 but is bristling with ergonomic enhancements, including its ergonomic pistol grip and railed pump arm, ready for your laser or flashlight. If you used the '870 before, you'll find the STF 12 familiar in the important ways but better in all the others!

If you're a Milsim skirmisher seeking a breaching shotgun for close encounters or a CQB specialist needing a platform to get the first shot when bursting into a room, the BO Dynamics FABARM STF 12 Short Initial Pump-action Gas Shotgun will give you what you need!

If you're in search of a lightweight and high performance platform with the AR-9 aesthetic, the G&G ARP9 2.0 Enhanced Combat Machine AEG can't have escaped your scrutiny! This is the second generation of G&G's superb ARP9 platform, boasting several internal refinements for even more performance and an external overhaul including the G&G GOS-V9 PDW stock and a new CNC aluminium M-LOK handguard.

We think this is the best-looking ARP9 variant yet but also offers more attachment interfaces thanks to its longer handguard and even better results downrange than its still respectable older sibling. Internal improvements include a new generation of ETU and MOSFET made more efficient and compact than ever before, a further reinforced gearbox shell, a redesigned bevel gear to reduce heat build-up and a double O-ring nozzle to enhance air seal qualities. Also present is G&G's latest rotary HOP-up unit, bringing the ARP9 into line with modern Airsoft releases, offering improved setting retention and finer adjustment increments.

The original ARP9 was famously the winner of the Airsoft Players Choice Awards for best AEG several years on the trot and in our assessment, the second generation is even better. If you're after a lightning-fast CQB platform which handles like a dream and gives the enemy team nightmares, the G&G ARP9 2.0 Enhanced Combat Machine AEG is what you need!

A great rifle for those of you looking to start a sniper loadout or if you are looking to get into Airsoft in general

An excellent long range weapon for both woodland and urban situations. An incredibly fun and tactical piece of equipment, the MK1 combines the comfortable grip of a stocked pistol carbine, with the range and barrel of sniper sniper rifle.

If you like to tiptoe around the skirmish site and catch the enemy off guard, Delta Armory has the perfect AEG for you! Introducing the DA-B04 Silent Ops 8, an M4/AR-15 AEG of the Delta Armory BRAVO™ series. BRAVO™ AEGs are constructed with strong high-density polymer receivers and aluminium handguards, making them perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game.

Internally, the DA-B04 is very well equipped for the price, boasting a 6.03mm tightbore inner barrel, rotary HOP-up unit and a reinforced version 2 gearbox equipped with a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate. Whether you run it as it is or plan on upgrading it top to bottom, the Silent Ops 8 from Delta Armory will serve you well!

If you're looking for an AR-15 with a unique look, you've found it! Built in partnership between ActionSportGames, ICS and HERA ARMS this rifle is an Airsoft gun like no other. Based on the AR-15 Mil-spec variant of the HERA ARMS CQR this rifle uses ICS's brand new SSS AEG Gearbox design and is officially licensed and fully trademarked.

The Airsoft replica itself is constructed from a mixture of high quality alloys and polymers, with an Alloy Receiver, Handguard Outer Barrel and Internals, with a Polymer Stock, Magazine, Foregrip and Flip-up Iron Sights. The rifle features a high quality finish, with heavy duty materials leading to a highly detailed and realistic looking rifle. The rifle isn't just a quality build, it also come fully trademarked with all the textual markings and logo shown on the real rifle for higher levels of realism.

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

If you've been checking out MK18 MOD.1 AEG platforms, the Delta Armory DA-A07-ETU ALPHA™ MK18 MOD.1 M4/AR-15 AEG is yet another fantastic option to weigh up. This MK18 MOD.1 AEG adds an enhanced receiver to the Milspec MK18 mix, providing a tasty combination of a proven design with extra consideration given to ergonomics and handling.

Being an AEG of the ALPHA™ line, this beast boasts full metal construction and the best internals Delta Armory has to offer, including the impressive programmable MOSFET/ETU system. Inside, we are treated to a plethora of CNC machined aluminium parts, CNC steel 16:1 gears, and a high torque motor. The ETU expands on these superb internals by allowing for burst mode and binary trigger to be programmed in, along with pre-cocking for an almost instantaneous trigger response.

If a MK18 MOD.1 will be your next buy, you have one heck of a decision to make! If you like advanced internals to go with the MK18 aesthetic, you cannot go wrong with the DA-A07-ETU ALPHA™ from Delta Armory!

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ II ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a Prometheus  purple hop rubber was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ II ETU. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 330 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you're looking for a top-tier SCAR replica and realism is your priority, you'll love the Cybergun FN Herstal SCAR-H CQC AEG! This full metal SCAR-H replica is flawlessly made, with some of the sharpest machining we've ever seen paired with superb quality polymer parts in all the right places. The outer barrel and muzzle device are also steel, giving this SCAR-H realistic weight distribution, perfect for the skirmisher who wants the most realistic experience in game.

Internally, the SCAR-H is based around VFC's version 2 gearbox, a modified design to allow for ambidextrous selector levers. Inside, we have 18:1 ratio steel gears running on 8mm ball-bearing bushings, reducing friction when compared to solid bushings for a smoother gearbox report when fired. The inner barrel is also a 6.04mm tightbore example, giving the FPS a slight boost thanks to improved air efficiency and improving accuracy potential with high-quality ammo. If a SCAR-H will be your next buy and you want the best externals out there, the Cybergun FN Herstal SCAR-H CQC AEG is ideal!

If you're looking for a top-tier SCAR replica and realism is your priority, you'll love the Cybergun FN Herstal SCAR-H CQC AEG! This full metal SCAR-H replica is flawlessly made, with some of the sharpest machining we've ever seen paired with superb quality polymer parts in all the right places. The outer barrel and muzzle device are also steel, giving this SCAR-H realistic weight distribution, perfect for the skirmisher who wants the most realistic experience in game.

Internally, the SCAR-H is based around VFC's version 2 gearbox, a modified design to allow for ambidextrous selector levers. Inside, we have 18:1 ratio steel gears running on 8mm ball-bearing bushings, reducing friction when compared to solid bushings for a smoother gearbox report when fired. The inner barrel is also a 6.04mm tightbore example, giving the FPS a slight boost thanks to improved air efficiency and improving accuracy potential with high-quality ammo. If a SCAR-H will be your next buy and you want the best externals out there, the Cybergun FN Herstal SCAR-H CQC AEG is ideal!

Due to the Rubber texture of the body of this gun it can not be 2 toned 

This Spring Powered Bolt Action Rifle is a super lightweight and quiet Airsoft Sniper Rifle that is based on the TM VSR; so much so that it is compatible with all Tokyo Marui VSR upgrades such as PDI and Prometheus brands. The externals of the Rifle feature a Rubberised Polymer which feels very different to your average replica and helps achieve a really realistic and eye-catching finish.

If you've been waiting for the return of the Delta Armory FREYA™ series, this will get you going! The Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG is the latest in the FREYA™ lineup, equipped with the same super slick skeletonised externals and EAGLE™ programmable MOSFET as the original with the exceptional pre-upgraded gearbox parts from the ETU series.

These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're in the market for a lightweight full metal AR platform kitted out with pre-upgraded parts throughout, the Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG should suit you perfectly. The marriage of the best bits of both the Delta Armory EAGLE™ and ETU series in the popular FREYA™ skeletonised externals makes the FREYA™ Gen.2 a beast in whatever environment it finds itself in!

If you've been waiting for the return of the Delta Armory FREYA™ series, this will get you going! The Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG is the latest in the FREYA™ lineup, equipped with the same super slick skeletonised externals and EAGLE™ programmable MOSFET as the original with the exceptional pre-upgraded gearbox parts from the ETU series.

These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're in the market for a lightweight full metal AR platform kitted out with pre-upgraded parts throughout, the Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG should suit you perfectly. The marriage of the best bits of both the Delta Armory EAGLE™ and ETU series in the popular FREYA™ skeletonised externals makes the FREYA™ Gen.2 a beast in whatever environment it finds itself in!

If you've been waiting for the return of the Delta Armory FREYA™ series, this will get you going! The Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG is the latest in the FREYA™ lineup, equipped with the same super slick skeletonised externals and EAGLE™ programmable MOSFET as the original with the exceptional pre-upgraded gearbox parts from the ETU series.

These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're in the market for a lightweight full metal AR platform kitted out with pre-upgraded parts throughout, the Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG should suit you perfectly. The marriage of the best bits of both the Delta Armory EAGLE™ and ETU series in the popular FREYA™ skeletonised externals makes the FREYA™ Gen.2 a beast in whatever environment it finds itself in!

If you're just getting into Airsoft and prefer a military-style primary, set your sights on the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG! This CQBR (Close Quarters Battle Receiver) style replica is constructed predominantly from high density polymer with an alloy outer barrel, front sight and handguard mounting hardware along with steel trim parts. This keeps the build lightweight and ideal for younger skirmishers or those with a speedy, aggressive playstyle!

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges with an accuracy advantage using high quality BBs. If your tastes dictate a military style primary and you need something cheap but effective to get started, the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG is a fantastic choice!

If you're just getting into Airsoft and prefer a military-style primary, set your sights on the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG! This CQBR (Close Quarters Battle Receiver) style replica is constructed predominantly from high density polymer with an alloy outer barrel, front sight and handguard mounting hardware along with steel trim parts. This keeps the build lightweight and ideal for younger skirmishers or those with a speedy, aggressive playstyle!

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges with an accuracy advantage using high quality BBs. If your tastes dictate a military style primary and you need something cheap but effective to get started, the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG is a fantastic choice!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day.

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day.

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day.

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

A gorgeous and modern Gas Blow Back Pistol which features G&G's Whirl Valve, an external HOP adjust, ambidextrous controls and a tough Polymer construction with lots of beautiful styling.

A gorgeous and modern Gas Blow Back Pistol which features G&G's Whirl Valve, an external HOP adjust, ambidextrous controls and a tough Polymer construction with lots of beautiful styling.

A gorgeous and modern Gas Blow Back Pistol which features G&G's Whirl Valve, an external HOP adjust, ambidextrous controls and a tough Polymer construction with lots of beautiful styling.

Locked to semi-automatic, this 6mm Airsoft Gas Blowback rifle is a lightweight and highly manoeuvrable platform, designed for use as a scout type weapon. The weapon features dual alloy and polymer construction, with alloy internals, outer barrel and buffer tube, and the grip, Stock and body made from polymer.

The JG M5 SD5 is an integrally suppressed SMG-5 AEG featuring a polymer body and full sized battery stock. A very popular style of Airsoft rifle due to its widespread use by sneaky types of many militaries, great for some discrete CQB kills! 

An incredibly unique and simple Airsoft pistol, this almost silent non-blowback handgun is the ultimate sneaky Airsoft sidearm. Based on the MK2 Ruger and featuring an alloy exterior, this is excellent for garden shooting and as a long range DMR pistol.

If you're a CQB skirmisher and are looking for a new compact AR platform with a ton of nifty features all for a relatively low price, then the DA-B18-EGL BRAVO™ has you covered! This PDW-style AEG comes with a CNC aluminium handguard and a high-density polymer receiver. And of course, the star of the show, the EAGLE™ MOSFET! This ETU allows you to program your preferred firing such as burst modes, binary trigger and an AUG mode.

This AR is equipped with an M-LOK handguard, sound-amplifying muzzle device and modernised receiver on the outside and kitted out on the inside with a rotary HOP-up unit and a reinforced version 2 gearbox equipped with a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate, a 6.03mm tightbore inner barrel and the EAGLE™ programmable MOSFET.

The compact nature of this AEG means that the PDW stock and buffer tube can only accommodate smaller batteries. We at Patrol Base recommend the Specna Arms 7.4V 600mAh 20/40C Battery for PDW as it is specifically designed for PDW-style assault rifles. If you want an advanced compact platform that is perfect for running around in a CQB skirmish, then the DA-B18-EGL BRAVO™ TALOS 3 PDW M4/AR-15 AEG is the one to choose!

Built by Specna Arms as part of their G11 series of AR36 clone rifles, but this one has a difference. Not only does it have a non-standard KeyMod handguard, but also features an internal electronic blowback system which gives the AEG a more exiting firing experience with a bit of recoil for enhanced realism.

Looking for something that stands out from the crowd of M4s and AKs? Here we have a rifle for those of a discerning taste. The LK58 from JG is a close replica of the real world FAL, a rifle that is often considered the western equivalent of the AK47, due to its widespread use throughout NATO during the cold war. The LK58 is modeled after the American civilian tactical FAL, the SA58, and has all the classic FAL features with a sprinkle of modernity for convenience.

A compact Airsoft Electric Pistol which is a replica of the CZ VZ-61, the perfect backup to another gun or as a Primary Gun for Close Quarter Scenarios.

For a machine pistol it doesn't get more compact than this! 

Perfect for those tightly spaced CQB environments. Used in such Hollywood films such as Taken and Air Force One, this iconic SMG is instantly recognisable and makes for a great Airsoft replica.

This variant comes with a quad 20mm RIS / RAS rail on the front handguard with the top rail extending along the length of the top of the gun, so you can customise to your hearts content with a variety of accessories.

With full metal construction, this replica has a realistic feel to it and is a great choice for beginner and veteran Airsofters alike.

An Airsoft Electronic 6mm BB Gun, based on the AK74 with more Tactical and Modern Features than the standard design and features G&G's new ETU and MOSFET Control System.

If you're a CQB player with too many friends at your local site, here's how you lose them! The Tokyo Marui Saiga-12 SBS Gas Blowback Shotgun is a purebred CQB dominator, sending 3 BBs downrange per shot for a realistic shotgun-style spread. While this is the SBS (Short Barreled Shotgun) version of the Saiga-12K, it is also remarkably effective outdoors with 0.28g BBs, as we would expect from Airsoft Gods, Tokyo Marui.

Build-wise, we are treated to full metal external construction with a steel top cover, fire selector, trigger guard and trim parts, all beautifully finished to match the real Saiga-12. AK nerds will notice the enlarged ejection port designed for 3-inch magnum shotgun shells and the frankly ferocious breacher-style muzzle choke, keeping the Saiga-12 visually distinct from its rifle-calibre sibling. Realistic markings adorn each side of the receiver and bolt carrier, giving the Saiga-12 SBS the iconic Russian look.

Being a CQB-optimised short-barreled shotgun, this Saiga-12 is rocking a 20mm Picatinny railed handguard with removable side rails and an optional bottom rail included in the box, meaning you can dress it up with your usual CQB laser and light doodads. The stock is mounted on the prolific M4/AR-15 buffer tube, though this one is skeletonised to reduce weight and folds to the side, leaning into the compact nature of the SBS version. This beast also features a full auto fire mode, a truly terrifying prospect for the enemy team!

We've been dreaming of a GBB Saiga-12 for what feels like an eternity and we have to say, the Tokyo Marui Saiga-12 SBS Gas Blowback Shotgun lives up to every expectation and then some!

If you're looking for an Airsoft bundle based around one of the best M4 AEGs on the market, you just found one! The KRYTAC REC7 Premium Primary Pack; SBR includes the KRYTAC Barrett REC7 SBR AEG, 2 extra mid-cap magazines, a holographic style red dot sight from Guerilla Tactical with a Ghost 3x Flip to side magnifier. The set also includes the HASTA Large Wheeled Rifle Case, giving you a nice home to store your new premium primary!

If you're into the race gun look and the performance advantages which come with it, you'll be a big fan of the P06 Slipstream EU17 Gas Blowback Pistol from Delta Armory! Boasting full metal construction, a dynamic weight-reduced ported slide, light-enhancing iron sights and a super-grippy imitation hand-stippled frame, this EU series comes customised straight out of the box with stylish, elite looks.

The P06 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box.

If you prefer speedy styling over standard mil-spec sidearms, the P06 Slipstream EU17 Gas Blowback Pistol is the Delta Armory pistol for you. With a super-slick external design inspired by the best real steel pistols on the market, the P06 Slipstream looks far more expensive than it actually is!

If you're in search of a lightweight AR platform for outdoor skirmishes, the Delta Armory DA-B14 BRAVO™ URX 3 12" M4/AR-15 AEG is one to watch. BRAVO™ AEGs are constructed with strong high-density polymer receivers and aluminium handguards, making them perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game.

The DA-B14 is rocking a URX 3 style handguard, a super slim handguard designed for modern shooting stances with a full-length 20mm Picatinny rail up top and short lengths on the sides and bottom, giving you enough space for your mission essentials without making the front end too heavy and difficult to point.

Inside, we are treated to the usual Delta Armory complement of pre-upgraded internals, including an SHS tappet plate, SHS piston with a full steel tooth rack, 7mm ball bearing bushings and a reinforced gearbox shell, complete with quick change spring system. All internal parts are Tokyo Marui AEG spec, meaning you have access to an unrivalled aftermarket if you ever want to upgrade. If you like to move fast skirmishing in the great outdoors, the Delta Armory DA-B14 BRAVO™ URX 3 12" M4/AR-15 AEG will be an asset!

An Airsoft 6mm BB Gun, based on the M4, this is the latest version of the G&G Combat Machine. The weapon is constructed almost entirely from Alloy, featuring an alloy Receiver, Stock Tube, Hand Guard and Barrel, with a Polymer Pistol Grip, Magazine and Stock.

If you have been laced up in CQB recently, the chances are the user was sporting this or something similar! The Firehawk from G&G Airsoft is a lightweight Airsoft AEG designed to be ultra-compact and loud, providing an intimidating muzzle report and excellent rate of fire, helping you dominate theCQB battlefield!

If you are looking for a base gun for your dream custom AR or you like the classic look, the Delta Armory DA-C01 CHARLIE™ M4A1 is what you need. This M4/AR-15 AEG is styled after the original M4A1 rifle of the 1990s but with some 21st-century ergonomic enhancements to improve handling and a styled-up Delta Armory receiver matching modern real steel "billet" receivers.

Being a replica of the Delta Armory CHARLIE™ line, the DA-C01 is constructed primarily from high density polymer with alloy trim parts and is kitted out on the inside with a tightbore inner barrel, a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide.

With more pre-upgraded internals than a platform this price deserves and some stylish, modern enhancements, the DA-C01 would make a fine basis for a custom build but can also be left as it is to take advantage of some interesting old-school features!

If you like the iconic M4A1 shape but want more ergonomic furniture, the Delta Armory DA-B02 BRAVO™ RIS M4/AR-15 AEG should suit you perfectly! The DA-B02 is based on the real steel US Army-issued M4A1 rifle but is rocking the Delta Armory modernised receiver, Delta battery stock and "gunfighter mod.3" style ergonomic pistol grip, giving it a touch of modern comfort to go with its classic militant aesthetic.

Being an AEG of the Delta Armory BRAVO™ line, the DA-B02 combines the high-density polymer receiver and buffer tube of the CHARLIE™ line with a CNC aluminium handguard and alloy outer barrel. This gives the platform more realistic weight distribution and an extra hint of realism without compromising the platform's agility.

Internally, the DA-B02 is well equipped with pre-upgraded internals focused on longevity and reliability straight out of the box. These include a reinforced gearbox shell, a piston with a full steel tooth rack and tappet plate from SHS and a quick change ball-bearing spring guide. A 6.03mm tightbore inner barrel paired with a rotary HOP-up unit is also present, intended to enhance long-range effectiveness and accuracy potential. Whether you're putting together a casual US Army-style loadout or need a lightweight platform to improve your in game agility, the DA-B02 BRAVO™ RIS M4/AR-15 AEG makes a fine primary!

If you like the iconic M4A1 shape but want more ergonomic furniture, the Delta Armory DA-B02 BRAVO™ RIS M4/AR-15 AEG should suit you perfectly! The DA-B02 is based on the real steel US Army-issued M4A1 rifle but is rocking the Delta Armory modernised receiver, Delta battery stock and "gunfighter mod.3" style ergonomic pistol grip, giving it a touch of modern comfort to go with its classic militant aesthetic.

Being an AEG of the Delta Armory BRAVO™ line, the DA-B02 combines the high-density polymer receiver and buffer tube of the CHARLIE™ line with a CNC aluminium handguard and alloy outer barrel. This gives the platform more realistic weight distribution and an extra hint of realism without compromising the platform's agility.

Internally, the DA-B02 is well equipped with pre-upgraded internals focused on longevity and reliability straight out of the box. These include a reinforced gearbox shell, a piston with a full steel tooth rack and tappet plate from SHS and a quick change ball-bearing spring guide. A 6.03mm tightbore inner barrel paired with a rotary HOP-up unit is also present, intended to enhance long-range effectiveness and accuracy potential. Whether you're putting together a casual US Army-style loadout or need a lightweight platform to improve your in game agility, the DA-B02 BRAVO™ RIS M4/AR-15 AEG makes a fine primary!

If you have your sights set on an M4/AR-15 AEG with plenty of accessory options in the perfect length for both indoor and outdoor skirmishes, the DA-B11 BRAVO™ from Delta Armory is a solid choice. BRAVO™ AEGs are constructed with strong high-density polymer receivers and aluminium handguards, making them perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game.

Externally, the DA-B11 boasts a great combination of 20mm Picatinny rails and M-LOK negative space attachment slots, giving you access to prolific 20mm Picatinny attachments as well as the latest bits for M-LOK systems. The barrel is 14.5 inches long, giving you a great mid-length platform ideal for a mix of CQB and outdoor scenarios. At the rear, we are treated to the superb Delta Armory battery stock, a comfortable and well-designed stock with built-in sling points and a decent-sized battery compartment ideal for LiPo batteries.

Inside the DA-B11, we are treated to some thoughtful internal upgrades to extend the platform's lifespan and enhance performance. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up unit, the steel 18:1 gearset runs on 7mm ball-bearing bushings and SHS provides the piston and tappet plate, a brand known for hard-wearing upgrade parts. Whether this will be your first AEG or a backup to a heavier full metal primary, you can't go wrong with the Delta Armory DA-B11!

An Airsoft electric powered 6mm SMG-5K replica with a full metal construction; the best friend to any close protection worker, movie bad guy, SAS operative or secret agent on skis!

If you like your M4 AEGs simple and effective, the Delta Armory DA-A01 ALPHA™ CQB-R M4/AR-15 AEG is perfect for you! Based on the real steel M4A1 in the shorter CQB-R configuration, this M4/AR-15 AEG is rocking a 10.5-inch outer barrel, putting it in that sweet spot, with enough barrel length to handle most long-range threats while not being too long that close-quarters combat becomes impossible.

 On the outside Delta has added a gunfighter mod.3 style pistol grip, the classic ALPHA™ style stock and an enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. This gives the now old-school M4A1 base platform a slight facelift without ruining its iconic outline and maintaining suitability for casual and Milsim skirmishes. If you love the M4A1 silhouette but want more modern ergonomics and a shorter barrel length, the Delta Armory DA-A01 ALPHA™ CQB-R M4/AR-15 AEG is the best choice!

If you like your M4 AEGs simple and effective, the Delta Armory DA-A01 ALPHA™ CQB-R M4/AR-15 AEG is perfect for you! Based on the real steel M4A1 in the shorter CQB-R configuration, this M4/AR-15 AEG is rocking a 10.5-inch outer barrel, putting it in that sweet spot, with enough barrel length to handle most long-range threats while not being too long that close-quarters combat becomes impossible.

 On the outside Delta has added a gunfighter mod.3 style pistol grip, the classic ALPHA™ style stock and an enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. This gives the now old-school M4A1 base platform a slight facelift without ruining its iconic outline and maintaining suitability for casual and Milsim skirmishes. If you love the M4A1 silhouette but want more modern ergonomics and a shorter barrel length, the Delta Armory DA-A01 ALPHA™ CQB-R M4/AR-15 AEG is the best choice!

If you're in search of an M-LOK-equipped AR AEG packed with pre-upgraded parts, the Delta Armory DA-B13-ETU BRAVO™ M4/AR-15 M-LOK AEG is one to watch. Like Delta's other BRAVO™ like offerings, the DA-B13-ETU boasts a CNC aluminium handguard and high density polymer receiver, giving you a great combination of realism and low weight. The handguard is rocking M-LOK slots at the 3, 6 & 9 o'clock positions and a 20mm Picatinny rail up top, ready for whatever accessories you need to complete your mission.

Delta's ETU AEGs are even more upgraded than the standard BRAVO™ line, boasting a pre-installed programmable ETU/MOSFET, a high torque motor, CNC steel 16:1 gears and CNC aluminium piston and cylinder heads. These pre-upgraded internals give the DA-B13-ETU a super snappy trigger response and raised rate of fire from the combination of improved efficiency via the ETU and faster mechanical cycling via the high-speed gearset.

If you need a handy platform with beastly internals at the perfect length for aggressive, fast-moving playstyles, the DA-B13-ETU from Delta Armory will be an asset to your game!

If you like speedy ported-slide pistols, the Armorer Works VX9 Mod 2 EU19 GBB Pistol should fit the bill! This full metal GBB pistol is based on the EU19 design but dressed to impress with a P80-inspired enhanced frame and unique ported slide. For the price, this is one of the best-looking GBB pistols out there in our opinion!

The P80 frame is one of the most popular upgrades for real steel Glocks, offering an undercut trigger guard, extended beavertail and a full 20mm Picatinny frame rail, enhancing ergonomics and offering broader compatibility with flashlights and laser aiming modules. Up top, the unique Armorer Works slide boasts linear front and rear serrations, anti-glare texture on the top, stylish ports on the top and sides and weight-reduction cuts for a slick, custom look. Inside the slide, the internals are WE EU-series spec, meaning an extra-large blowback unit which provides violent recoil, much heavier than most of its rivals.

The VX9 is Armorer Works' "compact" offering, ideal for those who want to carry a sidearm which is a bit smaller and lighter than "service pistol" sized platforms but still packs a punch when you need it. If your needs dictate a stylish pistol with pre-upgraded vibes, you won't find anything better at this price than the Armorer Works VX9 Mod 2 EU19 GBB Pistol!

The insanely iconic SMG-5K, popularised by movies as being every bad guys SMG of choice. This replica has an Alloy body to bring it to a realistic weight, and features a folding stock to make it more useful both indoors and outdoors.

The sneaky counterpart to the Bolster Tuned CM.041 upgraded SMG-5 AEGs has returned and it's better than ever! Enter the CM.041 SD5 SMG-5 Upgraded Edition; a full metal SMG-5 SD5 replica built by the same team behind the ultra-high-end Bolster Armouries AEG series and previous Bolster Tuned AEGs.

As with its less discrete brethren, the first thing the Bolster Armouries team do with the CM.041 SD is to tear it to pieces and build it back up to fulfil its true potential. This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, and a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware.

The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a 4UANTUM Friction Pro High-Performance Hop Up Bucking was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused to increase the strength of the shell to withstand the force of repeated piston impacts, and the bearing holes in the gearbox shell have been smoothed out. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the Bolster Tuned CM.041 SD5 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 SD to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041 SD! 320 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If your pistol tastes dictate the elite look, the Delta Armory P02 EU17 Gas Blowback Pistol belongs on your belt! This full metal EU-series GBB pistol is uniquely stylish, designed to imitate real-world customised pistols designed for tactical and competitive shooting. The P02 boasts Delta's unique imitation hand-stippled frame and a super-slick SAI style slide, mimicking the "Tier One" pistol, one of the trendsetters in the world of custom EU-series pistols.

The P02 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box. 

If you prefer a pistol which telegraphs its customised nature discretely, the Delta Armory P02 EU17 Gas Blowback Pistol is the one for you. Supplied in a polymer hard pistol case with wave foam internals, the P02 is professional and sporty in equal measure!

An exceptional value-for-money Airsoft Electric Gun that offers great features like a Quick Change Spring, Microswitch Trigger, Fully Ambidextrous Controls and Steel Gears. If you're new to the sport or you're looking for a reliable backup Gun as a spare, then this replica will appeal greatly. With fully Ambidextrous Fire Controls, this is also a strong choice for Left Handed Players.

If AR-9s are your style, it doesn't get much better than this! This is a near-perfect replica of the real steel Noveske "Space Invader" Pistol, with all the trademarks and logos to match. AR-9s are the happy medium between a pistol and a rifle, being compact and easy to manoeuvre but boasting a much larger magazine capacity and range due to the longer barrel.

The "Space Invader" boasts an SDU 2.0 MOSFET and eSilver Gearbox, which greatly improve this AEG's consistency, performance and trigger response. Beautiful looks and premium internals make for an incredible AEG and the Noveske nails that. If you need a compact CQB platform for running indoor skirmish fields, the EMG Noveske "Space Invader" Gen.4 PDW AR-9 AEG will be your best friend.

If AR-9s are your style, it doesn't get much better than this! This is a near-perfect replica of the real steel Noveske "Space Invader" Pistol, with all the trademarks and logos to match. AR-9s are the happy medium between a pistol and a rifle, being compact and easy to manoeuvre but boasting a much larger magazine capacity and range due to the longer barrel.

The "Space Invader" boasts an SDU 2.0 MOSFET and eSilver Gearbox, which greatly improve this AEG's consistency, performance and trigger response. Beautiful looks and premium internals make for an incredible AEG and the Noveske nails that. If you need a compact CQB platform for running indoor skirmish fields, the EMG Noveske "Space Invader" Gen.4 PDW AR-9 AEG will be your best friend.

If AR-9s are your style, it doesn't get much better than this! This is a near-perfect replica of the real steel Noveske "Space Invader" Pistol, with all the trademarks and logos to match. AR-9s are the happy medium between a pistol and a rifle, being compact and easy to manoeuvre but boasting a much larger magazine capacity and range due to the longer barrel.

The "Space Invader" boasts an SDU 2.0 MOSFET and eSilver Gearbox, which greatly improve this AEG's consistency, performance and trigger response. Beautiful looks and premium internals make for an incredible AEG and the Noveske nails that. If you need a compact CQB platform for running indoor skirmish fields, the EMG Noveske "Space Invader" Gen.4 PDW AR-9 AEG will be your best friend.

If AR-9s are your style, it doesn't get much better than this! This is a near-perfect replica of the real steel Noveske "Space Invader" Pistol, with all the trademarks and logos to match. AR-9s are the happy medium between a pistol and a rifle, being compact and easy to manoeuvre but boasting a much larger magazine capacity and range due to the longer barrel.

The "Space Invader" boasts an SDU 2.0 MOSFET and eSilver Gearbox, which greatly improve this AEG's consistency, performance and trigger response. Beautiful looks and premium internals make for an incredible AEG and the Noveske nails that. If you need a compact CQB platform for running indoor skirmish fields, the EMG Noveske "Space Invader" Gen.4 PDW AR-9 AEG will be your best friend.