Airsoft Magazines

If you're looking for high quality mid-caps with a more realistic look than EPM mags, the EMG 210rnd Troy BattleMag Magazines for M4/AR-15 AEGs; 2 Pack should suit you perfectly! Like EPM mags, these have a whopping capacity of 210 BBs, many more than other standard-length mid-caps but unlike EPMs, these mags are patterned after the real steel Troy BattleMag magazine and officially licenced by Troy through EMG. Perfect for the realism fans!

Just like the real BattleMag, the flanks of the mag body boast snake scale style texture for enhanced traction and a rubber magazine pull assist on the bottom for improved control during fast reloads. The pull assist is also useful for pulling the mags out of tight pouches, giving you a bit extra to hold into to speed up your reloads. 

Loading the BattleMag is the same process as other Airsoft mid-caps; through the fill/feed port on the top of the magazine body using an Airsoft speed loader or loading tool. The massive capacity may make this mag difficult to load using ODIN or similar loaders when the mags are new, so we recommend bedding the magazine in before using a crank wound loader by filling it up with a thumb plunger loader and emptying it a few times. If you want your magazines to be as realistic as your primary, the EMG Troy BattleMag 2 pack is what you need!

If you need a spare mag for your massive sniper rifle this one should do the trick! The 35rnd Low-Cap Magazine for M82A1 from Snow Wolf is designed for their spring powered M82A1 Barrett Sniper Rifle and will not work in the AEG versions. This mag is a spring loaded low-cap which is loaded through the fill/feed port at the top front of the magazine body using a speed loader or loading rod.

The magazine is constructed from high density polymer with a steel feed spring and has the appropriate Barrett mag looks with its reinforcing rib at the front and overall massive size. Unfortunately, this magazine will not fit the Lancer Tactical LT82 but does work in Snow Wolf spring-powered M82 rifles.

If you're looking for SAIGA-12 mags for your Double Bell SAIGA-12 AEG or want to give your AK a different look, the Double Bell 300rd Hi-Cap Magazine for SAIGA-12K AEG is what you need. This polymer high-capacity magazine holds approximately 300 BBs and is filled through the fill window at the top of the magazine body. Simply pop the fill window door open, pour your BBs in, wind the winding wheel on the baseplate 5-10 times or until the noise changes and you're good to go!

This is a 15rnd Short Magazine for the Tokyo Marui TMPSG-1 Sniper Rifle (electric). It is a compact magazine which makes prone shots much easier, and reduces the chance of magazines snagging on your equipment. It is loaded from the top using a Speedloader and is very easy to carry thanks to its' highly compact design.

If you are looking for spare magazines for your officially licensed SIG AIR pistol? You have found it! This magazine is a replacement original magazine with a 20 round capacity. The magazine can be filled using a speed loader through the feed lips or the fill window at the bottom of the front face of the magazine when the magazine feed spring has been pulled down. The inlet valve can be found at the centre of the baseplate. The magazine has an enhanced baseplate, with an extension to ensure your pistol doesn't slip out of your hands. If you are a CQB player, you'll need at least a few of these!

If you are looking for magazines, BBs and a Speedloader for your M4/AR-15 platform AEG why not get them all in one? The Lock 'n Load Bundle combines a 1KG bulk bag of our favourite BB weight for outdoors skirmishing, 0.28g from Delta Armory, 2 x NUPROL Adjustable capacity M4/AR-15 AEG magazines and a Delta Armory 100rnd Speedloader.

NUPROL's magazine should work in the vast majority of M4/AR-15 platform AEGs and gives you the choice of running them as real cap 30rnd mags or 140rnd mid-caps for when realism comes second to firepower. Whether you attend Milsim events or just regular walk-on skirmishes, this pack should see you well-equipped for battle!

If you're running the ICS TOD aka IDF Defender, load up on these magazines! The 400rnd Steel High-Cap Mag for ICS TOD/IDF Defender AEG offers realistic stamped steel construction for a realistically hefty feel, the perfect pairing for the highly realistic ICS IDF Defender. 

Like other wheel-wound Airsoft high-cap magazines, this mag is filled through the fill window on the top of the mag body by opening the hatch and pouring BBs straight in. With this done, close the hatch, wind the winding wheel on the baseplate 5-10 times or until the magazine is properly tensioned (listen out for the clicking noise made by the winding wheel changing) and you are ready to rock. If feeding ceases, wind the wheel again to get it feeding once again. If you're rocking the ICS IDF Defender, these are the mags you need!

Suppose you're looking for some extra magazines for your WE gas blowback AK platforms, if so, then this WE 30rnd Gas Magazine is exactly what you need! It has a polymer shell and alloy internals with a steel spring, which makes it robust and reliable, perfect for the battlefield. The magazine features a slick black design that matches most AK platforms perfectly.

The magazine holds up to 30 rounds, and features Polymer feed lips, which is also the BB fill location using an Airsoft speedloader. The magazine gas fill valve is found on the bottom of the magazine. The insertion method for this magazine is the traditional AK "rock and lock" style, this means you have to insert the front section of your mag first, then, "rock" your magazine back to "lock" it in place in your AK rifle.

If you want a high-quality magazine that will never let you or your WE gas blowback AK down, the WE 30rnd Gas Magazine for WE AK GBBRs is certainly the choice for you!

This magazine is a direct replacement for the original Double Eagle M62 magazine which came with it. The magazine is constructed from polymer and is fed by a spring meaning no rattle. The magazine holds up to 29 rounds, and is a great spare or replacement, or perfect purchase for anyone looking to increase the number of magazines they carry allowing them to remain in the field for longer.

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK47 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong polymer shell with reinforcing ribs across all its surfaces, to strengthen the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its steep curve is a tell-tale sign that this is a 7.62 style AK magazine, for those who like to keep it real!

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 130rnd AK47 Reinforced Polymer Mid-cap Magazine from CYMA sports a strong polymer shell with reinforcement ribs and widened gripping surface on the base of the magazine to aid in removing it cleanly from pouches. The magazine holds 130 6mm BBs and can be loaded through the fill/feed port at the top of the magazine using a standard Airsoft speed loader. This magazine is compatible with any standard AK style Airsoft AEG, but its steep curve is a tell-tale sign that this is a 7.62 style AK magazine, for those who are sticklers for the details!

A High Capacity Magazine designed and built for the ASG CZ 805 Bren A1 Series of Airsoft 6mm AEG Rifles. The magazine is constructed from Polymer, with a Polymer Shell and Internals.

A Magazine for the Airsoft AA-12 Sledge Hammer 6mm BB Gun AEG. The magazine is constructed from heavy duty Polymer, with a Polymer Shell and Internals.

If you're running an M82A1 AEG and need to keep it well fed for more in-game kills, the Snow Wolf 500rnd High-Cap Magazine for M82A1 AEGs should be on your shopping list! This mag has a whopping 500 BB capacity and is wheel-wound from the bottom. With this mag on board, you won't need to reload any time soon!

To fill this high-cap, simply open the fill window on the top of the magazine body and pour your BBs in. With this done, wind the wheel on the baseplate until the noise changes and you're ready to rock. Constructed with a metal shell and polymer internals, thankfully, this mag is far lighter and easier to carry than a real Barrett mag!

If you're looking for spare magazines for your ARCTURUS X C.A.T. PCC SMG, you have found them! The ARCTURUS 60rnd Mid-Cap Magazine for X C.A.T. PCC is constructed from high-density polymer with a steel feed spring and is designed to keep up with the high-rate-of-fire that the FE™ MOSFET provides.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 60bbs with no battle rattle whatsoever. The bottom of the magazine has a loop to provide extra grip when pulling the magazine from a pouch. If you have treated yourself to an ARCTURUS X C.A.T. PCC series SMG, you need some of these to keep it well fed!

If you've bagged yourself a bargain backup pistol, perhaps a spare magazine would make it a bit more useful! Introducing the LS B84 Gas magazine, a spare original magazine for the LS B84 NBB pistol. The magazine holds 15 rounds and can be loaded using a speed loader or by hand, through the fill/feed port on the front of the magazine. The gas fill valve is located on the magazine base and this magazine is compatible with green gas, ASG Ultrair, and summer gas.

If you need some additional magazines for your Ares Otto Repa SOC SLR Sniper Rifle, look no further! The Ares 40rnd Low-Cap Magazine for SOC Sniper Rifle AEG is designed specifically for this platform, it is constructed from high-density polymer and holds 40 BBs. This might seem like a low capacity but the SOC AEG is a sniper/DMR-type platform and 40rnds will be all you need to get the job done.

The magazine inserts via the "rock and lock" method, requiring that you index the front of the magazine into the well first and rotate the rear up to lock. It features ridged grooves on the sides to aid in gripping, with or without gloves. The magazine is loaded at the top of the mag using a speed loader, its low-cap design means there is no battle rattle when hiding in the bushes!

Looking for a spare mag for your STTI ST8 NBB Airsoft pistol? You've found what you need, right here! This magazine is designed for the STTI ST8 and is constructed with a polymer shell, alloy gas reservoir, a steel feed spring and brass valves. The magazine can be loaded through the fill/feed port at the top front of the magazine body and is filled with gas through the fill valve on the baseplate. As an alternative to filling with a speed loader you also have the option of pulling down the magazine follower, found on the left side of the mag and filling by hand.

If you plan on taking your WE Pistole 38 GBB Pistol out on the skirmish field but you feel like one 14rnd magazine is nowhere near enough ammo for you, then you need the WE 14rnd Gas Magazine for P38 Pistol! This magazine is the same as the one that comes with the pistol, so there will be no concerns with compatibility.

It holds 14 BBs and is filled using a speedloader on the feed lips at the top of the magazine. This is a low-capacity but is still 6 ammunition more than the real steel pistol. Its alloy shell protects the polymer internals and gas chamber, which can be filled at the bottom of the magazine in the gas valve.

Pick up some spare magazines for your P38 pistol and take it with you to your next skirmish, or pick up a couple of mags for some test firing in the garden!

If you need to carry some extra rounds for your SRC SR-SP GBB Pistol, you need a couple of these! Like most Airsoft pistol magazines, it features a double-stacked design, capable of holding up to 25 rounds. Ammunition can be loaded from the front either by hand or using an Airsoft speed loader, once the BB guide has been pulled to the bottom of the magazine.

This magazine can be filled with gas via the valve on the bottom through the base plate, which is removable, allowing easier access for any maintenance and can be replaced should the magazine become damaged. On closer inspection of the magazine, subtle Raven logos have been engraved into the bottom of the base plate, a tasteful finishing touch.

If you're running a WE SMG-8 GBB platform, you'll need a few of these to keep the fun and kills coming! The WE 44rnd Magazine for WE GBB SMGs is constructed from alloy and compatible with the WE SMG-8 and similar platforms from WE. The mag can be loaded either through the feed lips at the top of the mag body or through the feed channel by pulling the follower down. We recommend a speed loader to make the loading process easy and avoid being the last one ready on game day!

This is a green gas magazine and is compatible with summer gas, green gas or red gas and can be filled by inverting the magazine through the fill valve on the baseplate.

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check this out! The Delta Armory 120rnd DMAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after a well-known polymer real steel magazine, complete with waffle-style gripping texture.

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. The magazine is also marked on either side with the capacity (120) and the Delta Armory logo. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

The world's best Airsoft Magazine just got better! Made to a seriously tough standard using excellent materials, the EPM-1 Magazine holds a massive 250rnds in a Spring-Fed Mid-Cap design. This means that you still get the incredible feeding performance of a PTS Mid-Cap, but with a capacity that can rival most High-Cap Magazines!

Having a high-cap magazine handy may ruin your discrete advance with a bit of "battle rattle", but nothing beats the absolute storm of fire you can lay down with one of these on your AEG! The 320rnd Steel High-cap Magazine from CYMA is patterned after the real M4/AR15 STANAG magazine, with a steel shell and realistic reinforcement ribs on the outside. This magazine is a wheel wound high-cap mag, and the winding wheel can be found on the baseplate, and the fill window is located on the top of the magazine. This mag is compatible with any standard M4/AR15 AEG rifle, as well as L85 AEG rifles, 416 series AEGs and SCAR-L AEGs.

Another excellent quality product from PTS, a 170rd Mid Cap magazine for those of you looking for a more low profile but reliable magazine option.

Another excellent quality product from PTS, a 170rd Mid Cap magazine for those of you looking for a more low profile but reliable magazine option.

If you are looking for M4/AR-15 AEG magazines that are a cut above the rest, the PTS Syndicate 150rnd EPM Gen.2 Enhanced Polymer Magazine is the one to go for! This is the Gen.2 version of the EPM, building on the superb design of the original by adding improved gripping texture on the exterior, compatibility with Magpul MAGLINK® magazine couplers and a new, more rigid Zytel polymer baseplate.

Like the usual mid-cap magazine, the EPM Gen.2 is loaded through the fill/feed port at the top using an Airsoft speed loader or loading rod/tool and has no battle rattle whatsoever, making it great for milsim inclined skirmishers and those who prioritise stealth when skirmishing. All of the enhancements from the original EPM design have been retained, including the magazine well guides at the top of the shell which eliminate wobble, the witness window showcasing mock cartridges with a clear section to confirm the mag is fully loaded and the high visibility orange follower so you can confirm when your mag is empty.

With a wide range of compatibility, a high-strength compression spring and Dupont Zytel polymer construction, you would be hard pressed to find a better magazine for M4/AR-15 AEG compatible platforms!

If you are looking for M4/AR-15 AEG magazines that are a cut above the rest, the PTS Syndicate 150rnd EPM Gen.2 Enhanced Polymer Magazine is the one to go for! This is the Gen.2 version of the EPM, building on the superb design of the original by adding improved gripping texture on the exterior, compatibility with Magpul MAGLINK® magazine couplers and a new, more rigid Zytel polymer baseplate.

Like the usual mid-cap magazine, the EPM Gen.2 is loaded through the fill/feed port at the top using an Airsoft speed loader or loading rod/tool and has no battle rattle whatsoever, making it great for milsim inclined skirmishers and those who prioritise stealth when skirmishing. All of the enhancements from the original EPM design have been retained, including the magazine well guides at the top of the shell which eliminate wobble, the witness window showcasing mock cartridges with a clear section to confirm the mag is fully loaded and the high visibility orange follower so you can confirm when your mag is empty.

With a wide range of compatibility, a high-strength compression spring and Dupont Zytel polymer construction, you would be hard pressed to find a better magazine for M4/AR-15 AEG compatible platforms!

The latest edition of the world's best Airsoft Magazine! Built for ultimate performance and durability, the EPM1RX Magazine from PTS Syndicate holds a massive 250 rnds in a Spring-Fed Mid-Cap design. This means you get the superb feeding performance of a Mid-Cap, but with a generous capacity that rivals most High-Cap Magazines!

The latest revision of this magazine includes brand new tooling for the internal shell, which leads to more precise dimensions and a smoother BB channel. Perfection just got even better! If you want only the best of the best for your favourite M4 AEG, HPA adapter or Maximus kit, you need to treat it to some PTS Syndicate EPM1-RX 250rnd Magazines.

A Mid-Cap Magazine for M4/M16 Platform Airsoft Guns, which is made with a Steel Outer Shell to make it tough, well weighted and realistic. It has a 'stubby' design as seen in the M16s of the Vietnam War Era, and is a Spring-Loaded design which will feed all the BBs until empty without the need for winding. This is ideal for DMRs or Period Replicas, or for anyone who wants Mid-Cap Magazines that are low profile and won't get snagged on your kit as much as full size ones.