Airsoft Magazines

If you're looking for additional mags for your CYMA SVD/SVU you've come to the right place! Constructed from high-density polymer, these magazines hold 300 BBs so you don't have to carry as many to stay in the fight for longer. The mag features cut grooves on the sides as well as the rear of the mag to aid in gripping, with or without gloves.

It is loaded at the top of the mag using the fill window and being a high cap design means that you will need to rotate the wheel to load BBs onto the spring. Make sure it is completely empty after use to avoid wear and tear on the internal mechanisms of the magazine.

Please note that these mags are specifically for CYMA Airsoft AEGs.

If you're looking for SAIGA-12 mags for your Double Bell SAIGA-12 AEG or want to give your AK a different look, the Double Bell 300rd Hi-Cap Magazine for SAIGA-12K AEG is what you need. This polymer high-capacity magazine holds approximately 300 BBs and is filled through the fill window at the top of the magazine body. Simply pop the fill window door open, pour your BBs in, wind the winding wheel on the baseplate 5-10 times or until the noise changes and you're good to go!

If you need some additional magazines for your Ares Otto Repa SOC SLR Sniper Rifle, look no further! The Ares 40rnd Low-Cap Magazine for SOC Sniper Rifle AEG is designed specifically for this platform, it is constructed from high-density polymer and holds 40 BBs. This might seem like a low capacity but the SOC AEG is a sniper/DMR-type platform and 40rnds will be all you need to get the job done.

The magazine inserts via the "rock and lock" method, requiring that you index the front of the magazine into the well first and rotate the rear up to lock. It features ridged grooves on the sides to aid in gripping, with or without gloves. The magazine is loaded at the top of the mag using a speed loader, its low-cap design means there is no battle rattle when hiding in the bushes!

A replacement or spare Gas Tank for the Golden Eagle Type 870 Series M870 Gas Airsoft Shotguns. Made to the original specifications, this Gas Tank will pop into the Stock of a Type 870 Series M870 Gas Shotgun and keep you in the fight for longer. If you own a Gas Golden Eagle M870 and want to carry Spare Tanks rather than a large Bottle of Gas in the field, then these Gas Tank replacements are ideal for you.

A High Capacity Magazine designed and built for the ASG CZ 805 Bren A1 Series of Airsoft 6mm AEG Rifles. The magazine is constructed from Polymer, with a Polymer Shell and Internals. 

Looking for a spare mag for your STTI ST8 NBB Airsoft pistol? You've found what you need, right here! This magazine is designed for the STTI ST8 and is constructed with a polymer shell, alloy gas reservoir, a steel feed spring and brass valves. The magazine can be loaded through the fill/feed port at the top front of the magazine body and is filled with gas through the fill valve on the baseplate. As an alternative to filling with a speed loader you also have the option of pulling down the magazine follower, found on the left side of the mag and filling by hand.

If you are looking for spare magazines for your officially licensed SIG AIR pistol? You have found it! This magazine is a replacement original magazine with a 20 round capacity. The magazine can be filled using a speed loader through the feed lips or the fill window at the bottom of the front face of the magazine when the magazine feed spring has been pulled down. The inlet valve can be found at the centre of the baseplate. The magazine has an enhanced baseplate, with an extension to ensure your pistol doesn't slip out of your hands. If you are a CQB player, you'll need at least a few of these!

A spare or replacement Gas Magazine for the Cyber Gun FN Five Seven (5-7), which holds a total of 17 rounds and is constructed to the exact same standard as the original magazine, using Alloy for the body and Polymer for the feed lips.

If you're planning to run your EU series, AAP-01 or Lancer Tactical CTHULHU on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; EU Series & AAP-01 will do the trick! This HPA adapter is designed for EU series GBB pistols and should also fit the Action Army AAP-01 and Lancer Tactical's radical CTHULHU pistol. Designed to allow standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity with this adapter on your gat!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you've dropped your SigAir 100rnd Mid-Cap Magazine and now the baseplate is damaged, then you're in luck! The VFC SigAir Polymer MPX AEG Replacement Magazine Baseplate fits only these magazines and comes with a steel screw so you can instantly replace your broken or marked baseplates. It is only compatible with these magazines and will not fit on other magazines.

The baseplate features SigAir trademarks on the bottom, we imagine nobody is really going to notice these, but when you reload your MPX John Wick style, your teammates and foes alike may catch a glimpse of the trademarks when you get your own cinematic slow-motion shot.

If you've bagged yourself a bargain backup pistol, perhaps a spare magazine would make it a bit more useful! Introducing the LS B84 Gas magazine, a spare original magazine for the LS B84 NBB pistol. The magazine holds 15 rounds and can be loaded using a speed loader or by hand, through the fill/feed port on the front of the magazine. The gas fill valve is located on the magazine base and this magazine is compatible with green gas, ASG Ultrair, and summer gas.

Every good sniper needs good mags. If you're one of the lucky few that wield the Barrett M98B M-RAD, you'll need the round to maximum picking targets off from afar.

This magazine from Snow Wolf has a 280 round capacity with a high cap design, meaning you can pop this mag in and fire for a huge period of time without the need to switch mags.

With a lightweight polymer design, the mag also helps keep your huge rifle's weight down.

If you've picked up one of the huge EMG Barrett M98B MRAD® Sniper Rifles, some spare mags might be useful for the battlefield! This magazine is identical to the one that comes with the sniper so it's perfect for building a full sniper loadout. It has a capacity of 100 BBs, giving you plenty of shots on the skirmish field before needing to reload.

Mid-cap magazines are perfect for skirmishers, no winding is required and no battle rattle when you're sneaking around the battlefield with your massive sniper rifle. If you fancy an extra 100 BBs for your sniping escapades, the EMG 100rnd Mid-Cap Magazine for Barrett M98B MRAD is the perfect magazine for you!

If you are looking to take your Vorsk VX26 out into the cold look no further! This CO2 magazine will ensure you get the absolute best out of your GBB pistol, even over the winter months. Remember to lubricate both the magazine and pistol to prevent damage to your seals as CO2 contains no lubricant. This magazine uses 12g CO2 bulbs without threading.

If you plan on taking your WE P38 GBB Pistol out on the skirmish field but you feel like one 14rnd magazine is nowhere near enough ammo for you, then you need the WE 14rnd Gas Magazine for P38 Pistol! This magazine is the same as the one that comes with the pistol, so there will be no concerns with compatibility.

It holds 14 BBs and is filled using a speedloader on the feed lips at the top of the magazine. This is a low-capacity but is still 6 ammunition more than the real steel pistol. Its alloy shell protects the polymer internals and gas chamber, which can be filled at the bottom of the magazine in the gas valve.

Pick up some spare magazines for your P38 pistol and take it with you to your next skirmish, or pick up a couple of mags for some test firing in the garden!

If you are looking for magazines, BBs and a Speedloader for your M4/AR-15 platform AEG why not get them all in one? The Lock 'n Load Bundle combines a 1KG bulk bag of our favourite BB weight for outdoors skirmishing, 0.28g from Delta Armory, 2 x NUPROL Adjustable capacity M4/AR-15 AEG magazines and a Big Dragon 100rnd Speedloader.

NUPROL's magazine should work in the vast majority of M4/AR-15 platform AEGs and gives you the choice of running them as real cap 30rnd mags or 140rnd mid-caps for when realism comes second to firepower. Whether you attend Milsim events or just regular walk-on skirmishes, this pack should see you well-equipped for battle!

Suppose you're looking for some extra magazines for your WE gas blowback AK platforms, if so, then this WE 30rnd Gas Magazine is exactly what you need! It has a polymer shell and alloy internals with a steel spring, which makes it robust and reliable, perfect for the battlefield. The magazine features a slick black design that matches most AK platforms perfectly.

The magazine holds up to 30 rounds, and features Polymer feed lips, which is also the BB fill location using an Airsoft speedloader. The magazine gas fill valve is found on the bottom of the magazine. The insertion method for this magazine is the traditional AK "rock and lock" style, this means you have to insert the front section of your mag first, then, "rock" your magazine back to "lock" it in place in your AK rifle.

If you want a high-quality magazine that will never let you or your WE gas blowback AK down, the WE 30rnd Gas Magazine for WE AK GBBRs is certainly the choice for you!

Shooting 350 BBs at a target without the added effort of swapping magazines sounds nice right, but usually that comes with the pain and price tag of setting up HPA build, well not anymore! This WE 350rnd Green Gas Drum Magazine allows you to do just that, let off 350rnds without being interrupted by having to swap magazines. It is designed for WE B92 pistols but may work with others, though compatibility cannot be guaranteed.

The magazine is constructed with a hefty alloy gas reservoir with a high-density polymer drum with rubber shock bumpers and an external winding wheel on the front which is easy to wind quickly with or without gloves. The sizeable gas reservoir of this magazine means in most cases you will easily be able to dump the full magazine without a refill, so if you want to run a pistol only this will provide you with more than enough firepower!

Whether you use a Specna Arms M4/AR-15 AEG or need affordable M4 mid-caps to expand your firepower, the 125rnd S-Mag Mid-cap is what you need. This magazine is constructed from high-density polymer with a steel feed spring and is loaded through the fill/feed port at the top of the magazine body, just like other mid-caps.

The S-Mag is compatible with the vast majority of M4/AR-15 AEGs and should also fit most 416, SCAR-L and L85 AEG replicas. Being a mid-cap, this magazine won't give you away with the dreaded battle rattle as you run and is ideal for sneaky skirmishers looking for more capacity!

Looking for some extra firepower to keep the enemies' heads down as you advance? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high density polymer with a modern design aesthetic, making it perfect for practically any M4/AR15 Airsoft AEG, especially those leaning into a more aggressive look, or those looking to sample the support weapon playstyle. This magazine is an auto winding design which requires 3x AAA batteries to operate.