Airsoft Under £75

A flashlight design for use with pistols, the X399YH-B is easily attached to your Picatinny pistol rail for if you want to transform your pistol into more of a spec ops style. The flashlight is features aluminium construction with fantastic and robust durability that will operate in even the harshest conditions.

It features 800 lumens on a low output with a potential for 150m maximum light distance, easily switched on/off using the rear rocker switch. The torch is powered by aftermarket 123A batteries.

The ideal magazine for those who want to spend less time reloading and more time shooting!

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Maritime Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Maritime Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

If you're into revolvers and seeking an affordable way to fill your holster, the HFC HG-132B Python 4" NBB Gas Revolver is ideal. This green gas-powered non-blowback revolver is inspired by the real steel Colt Python and works just like the real thing, with a rotating cylinder, removable shells and a functional double action/single action trigger. This is the chrome-finished model, denoted with a "C" suffix and rocking a mirror-shiny chrome finish which makes it stand out next to boring black pistols.

Being a revolver, the HG-132C will be a challenge to use in-game, and its lack of a HOP-up and relatively low FPS mean it is definitely more suitable for CQB than taking out targets at long range. Being constructed primarily from high-density polymer with an alloy outer barrel makes the HG-132C nice and light, leaning into its role as a last-ditch skirmish backup. If you have revolver fever and love a platform with style but don't want to shell out (tehee) too much, the HFC HG-132C Python 4" NBB Gas Revolver is the wheelgun for you!

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Ballistic Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Ballistic Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

Built by NUPROL as part of their Power range this is a high quality charger designed to charge LiPo, NiMh, LiFe, LiHv, LiLo, NiCd and PB batteries, all of the most common types of battery used in Airsoft replicas.

If you're looking for an alternative to red dot sights with a long-range leaning, the Delta Armory 4x32 FPCO Illuminated Riflescope is a fantastic choice. A compact, fixed 4x magnification optic with a similar vibe to the famous ACOG series, the FPCO boasts modern styling with its piggy-back 20mm Picatinny rails and offers either red, green or blue reticle illumination. 

The reticle itself is a mildot reticle, offering vertical and horizontal stadia lines so you can lead moving targets and adjust on the fly for targets at the pinnacle of Airsoft effective range. The 4x32 FPCO is equipped with an integral 20mm Picatinny rail mount, making it ready to mount on any 20mm rail without the need to buy extra scope rings or other mounting solutions. If you want to identify and engage targets more effectively at mid to long-range, the Delta Armory 4x32 FPCO Illuminated Riflescope belongs on your gat!

For those of you starting out in Airsoft skirmishing the CM.126 is a great starter pistol for beginners, or a budget friendly sidearm for when your primary is empty and need to quickly switch to a backup. 

Ready to go out of the box, this electric Airsoft 6mm BB gun gets you straight into battle, and even features an adjustable Hop-up.

With an alloy mock slide and polymer frame construction, the CM.126 is lightweight and efficient at both semi and full automatic, this pistol has everything you need to get you on the field.

For those of you starting out in Airsoft skirmishing the CM.126 is a great starter pistol for beginners, or a budget friendly sidearm for when your primary is empty and need to quickly switch to a backup. 

Ready to go out of the box, this electric Airsoft 6mm BB gun gets you straight into battle, and even features an adjustable Hop-up.

With an alloy mock slide and polymer frame construction, the CM.126 is lightweight and efficient at both semi and full automatic, this pistol has everything you need to get you on the field.

If you are looking for a short tracer unit which maintains the illusion of being a suppressor, this NUPROL Tracer Unit does just that! Styled externally after a modern rifle suppressor, the NUPROL Tracer is a great addition to any CQB build thanks to its short overall length, and obviously, the intimidation factor glowing BBs provides. This tracer has an internal rechargeable battery that can be charged using the included Micro-USB cable, and can be mounted to any 14mm CCW male threaded barrel.

A lightweight and tough protective carry case from NUPROL, which features PnP ( Pick & Pluck ) foam internals as well as sliding catches and padlock loops.

Are you evil? Do you not think 3/6 shots per trigger pull is enough firepower? In that case, allow us to introduce you to the NUPROL 1200rnd Electric Drum Magazine for Tri-shot Airsoft shotguns, a device that will not make you any friends at a CQB skirmish, thats for sure! This drum magazine is constructed from high density polymer with a modern look, matching well with modern tactical pump action Airsoft shotguns and transforming any shotgun it is mounted to into an intimidating CQB dominator, both in looks and in function! 

If you're running one of the new Umarex BERETTA PMX SMGs, you'll need a few of these to keep the fun and kills coming! The 48rnd Green Gas Magazine is constructed from alloy and compatible with the Umarex BERETTA PMX. The mag can be loaded either through the feed lips at the top of the mag body or through the feed channel by pulling the follower down. We recommend a speed loader to make the loading process easy and avoid being the last one ready on game day!

This is a green gas magazine and is compatible with summer gas, green gas or red gas and can be filled by inverting the magazine through the fill valve on the baseplate.

Looking to get into the sport and start skirmishing? The iconic style of the F226 might be up your street.

Electrically powered, with both semi and fully automatic functionality, the pistol also sports a 20mm RIS / RAS rail to accommodate a wealth of tactical accessories for those more spec ops style missions.

An electric powered non-blowback Airsoft pistol, also known as an AEP (Automatic Electric Pistol), designed to function and work like the popular Hi-Capa style pistol.

The absolute granddaddy of tactical backpacks with 40L of internal storage spread across five compartments, a further five exterior pockets and a total of 98 usable MOLLE loops. Every inch of this backpack is configured to maximise usable space, and you'll find that there is a pocket for every purpose.

The absolute granddaddy of tactical backpacks with 40L of internal storage spread across five compartments, a further five exterior pockets and a total of 98 usable MOLLE loops. Every inch of this backpack is configured to maximise usable space, and you'll find that there is a pocket for every purpose.

The absolute granddaddy of tactical backpacks with 40L of internal storage spread across five compartments, a further five exterior pockets and a total of 98 usable MOLLE loops. Every inch of this backpack is configured to maximise usable space, and you'll find that there is a pocket for every purpose.

The absolute granddaddy of tactical backpacks with 40L of internal storage spread across five compartments, a further five exterior pockets and a total of 98 usable MOLLE loops. Every inch of this backpack is configured to maximise usable space, and you'll find that there is a pocket for every purpose.

The absolute granddaddy of tactical backpacks with 40L of internal storage spread across five compartments, a further five exterior pockets and a total of 98 usable MOLLE loops. Every inch of this backpack is configured to maximise usable space, and you'll find that there is a pocket for every purpose.

A well thought out and neatly organised Range Bag, which is easy to carry around and has more than enough room for a trip to the range or local CQB skirmish arena. For those who like to neatly divide and organise their kit, you're going to be overjoyed at the contents of this bag.

Looking for a rifle case without the chunky and blocky form of a polymer hard case? Sometimes discretion is the best form of security! The Semi Hard Gun Case Version 2 from S&T combines the crush resistance of a polymer case with the discrete looks of a nylon gun bag to provide the best of both worlds, and draw fewer eyes if you take a train to your local site!

This case features velcro compatible internal fabric with removable and reconfigurable retainers for your rifle and high-density foam blocks to ensure the rifle sits snugly and securely inside the case. To aid you in carrying it to the game, the case comes with an integrated dual carry handle, a messenger bag style strap, and a backpack style harness, allowing you to choose the most comfortable carry option for you!

Looking for a rifle case without the chunky and blocky form of a polymer hard case? Sometimes discretion is the best form of security! The Semi Hard Gun Case Version 2 from S&T combines the crush resistance of a polymer case with the discrete looks of a nylon gun bag to provide the best of both worlds, and draw fewer eyes if you take a train to your local site!

This case features velcro compatible internal fabric with removable and reconfigurable retainers for your rifle and high-density foam blocks to ensure the rifle sits snugly and securely inside the case. To aid you in carrying it to the game, the case comes with an integrated dual carry handle, a messenger bag style strap, and a backpack style harness, allowing you to choose the most comfortable carry option for you!

An incredibly unique and simple Airsoft pistol, this almost silent non-blowback handgun is the ultimate sneaky Airsoft sidearm. Based on the MK2 Ruger and featuring an alloy exterior, this is excellent for garden shooting and as a long range DMR pistol.

A 20mm Railed MK18 Handguard for AR Platform AEGs and GBB replicas, which is ideal for those searching for the 'Special Forces' look. It is constructed to a lovely standard from Aluminium and features Numbered Rail Slots for the precise placement of accessories. The bottom Rail measures a total of 21.3cm, and the other three at 24.4cm. If you're looking to spice up your AR with some external furniture, then a Handguard swap is a great place to start.

As the weather gets colder we all want to stay warm while skirmishing, but not at the cost of compromising our loadouts! The Highlander STOIRM Tactical softshell jacket is the perfect solution and has the prerequisite tactical styling, complete with velcro arm panels so it looks good beneath your rig.

The STOIRM (yes, it's not a typo!) can also do double duty as an everyday coat thanks to its discrete and professional looks, and its pack-away hood and plethora of pockets will see you well-equipped for any task, whether you are hiking or taking the dog out for a walk!

As the weather gets colder we all want to stay warm while skirmishing, but not at the cost of compromising our loadouts! The Highlander STOIRM Tactical softshell jacket is the perfect solution and has the prerequisite tactical styling, complete with velcro arm panels so it looks good beneath your rig.

The STOIRM (yes, it's not a typo!) can also do double duty as an everyday coat thanks to its discrete and professional looks, and its pack-away hood and plethora of pockets will see you well-equipped for any task, whether you are hiking or taking the dog out for a walk!

Featuring  a full size stock that make it it a  menacing presence on any battlefield, this Airsoft replica of the iconic M870 if for those of you for an operator's choice to clear rooms in CQB skirmishes and with it's satisfying pump action and tri-shot spread, when enemy insurgents need to be dealt with quickly and efficiently!