- Programmable ETU inside
- Takes ARP-9 magazines
- Ultra-compact and lightweight
If you have been eying up an AR-9 recently, your choice just got more difficult! Introducing the PX9 from Classic Army, a compact and maneuverable AR-9 AEG with a built-in ETU which can be programmed for burst mode! The PX9 is equipped with a hybrid Picatinny M-LOK railed handguard, railed receiver and a highly flexible PDW stock which can still fit a standard buffer tube sized battery inside!
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship all around world, with delivery not only to the UK, but to most of the EU and select Worldwide locations as well. We provide a working day by road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change, and are only a rough guide. For more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£4.95
Approx.
UK Next Day
£6.95
Approx.
Highlands / Islands
£12.99*
Approx.
EU
£12.99+*
Approx.
* Please note that Scottish Highlands, Islands and EU post prices can vary wildly. Prices range from £8.99, up to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The Classic Army PX9 is constructed primarily from high density polymer, keeping the build light, scratch resistant and highly conducive to effective CQB performance. The PX9 is hot on the heels of the G&G ARP-9, borrowing its aesthetic and sharing the same magazines, allowing you to share mags with ARP-9 equipped teammates. If you are after a CQB primary for when your arms get tired, this would fit the bill perfectly, being a featherweight 1.7kg!
Starting from the front, as we often do, we can find a polymer sound amplifying muzzle device, which gives the PX9 a stifling muzzle report. The "snap snap snap" of a triple tap from this AEG drowns out its motor noise, and is loud enough on the shooter's end! If you are downrange of the PX9 you will definitely know about it, and from the shooter's perspective, this will allow you to more effectively suppress the enemy team and gain the upper hand. Ths device attaches to the 14mm CCW male threads at the tip of the alloy 5 inch outer barrel, allowing you to change up the look of the PX9 if you are more of the sneaky type, and may not benefit from the intimidating muzzle report.
Surrounding the outer barrel we are treated to a hybrid 20mm Picatinny M-LOK handguard which provides Picatinny rails in all the places you will need them, and substitutes M-LOK in at the 3 and 9 o'clock position to keep the front end of the PX9 light and easy to point. The Picatinny rails are present at the 6 and 12 o'clock positions to provide mounting points for a vertical front grip and PEQ laser unit, should you see fit to mount them. On either side of the handguard there is a small section of Picatinny rail, conveniently providing just enough space for a tactical flashlight to be mounted when the situation calls for it.
The 12 o'clock handguard rail meets the receiver rail in a monolithic manner, providing an uninterrupted rail which is long enough for even the biggest rifle scopes out there. We don't expect anyone to mount a massive scope on the PX9, that's not really what it is for, but this longer attachment interface is perfect if you plan to use a red dot sight and magnifier combo. As it comes in the box, the PX9 has a pair of Troy style flip-up iron sights installed which provide a protected front sight blade and two rear apertures to choose from. The rear sight is adjustable for windage using the dial on the right side, and the front sight can be raised and lowered to adjust for elevation using an AR15 front sight adjustment tool.
Moving to the receiver, we can see the familiar sight of M4/AR15 controls, which are ideally placed for fast access and manipulation. The magazine release can be found on the right side of the AEG, and sits well within reach of the shooters trigger finger, allowing for a highly fashionable "drop free" reload. The fire selector is found on the left side of the AEG, directly above the pistol grip, and sits comfortably beneath a right handed shooter's thumb when in a firing grip. Each fire mode is denoted with markings, reading "SAFE-SEMI-AUTO". This fire selector is a modernised design which is enlarged where it is useful and reprofiled in areas where non essential weight can be reduced. The selector has serrations on the upper and lower surface, ensuring that you can operate this important control effectively whenever you need to. The trigger of the PX9 is a flat "speed" style trigger, intended for rapid semi-automatic fire. The trigger has a helpful ledge at the bottom, assisting the shooter in staying on the trigger, regardless of how much it is getting spammed! The left side of the receiver also feature a dummy bolt release catch, which does nothing on an Airsoft AEG, but has nonetheless been styled up to match the design of the fire selector and magazine release, tying the whole gun together.
At the top rear of the receiver, we can find the ambidextrous charging handle of the PX9, which is designed in a similar fashion to popular "raptor" style charging handles. The charging handle does not need to be pulled to prime the AEG, but instead retracts the mock bolt carrier to reveal the rotary adjustable HOP-up system. The HOP-up can be adjusted from the right side of the AEG whilst the charging handle is held to the rear. The rotary unit is widely known as superior to the legacy gear HOP unit and provides more stable adjustment with less likelihood of the HOP setting being affected by the vibrations from firing.
The pistol grip of the PX9 is an ergonomic type with a filled out backstrap to make the AEG more comfortable to hold when not wearing gloves, or for those with smaller hands. The pistol grip has linear texturing on the front and back staps, and crackle texture on the sides to provide optimum grip in any weather conditions. One of the aspects which makes the PX9 so compact is its 2 position PDW type stock, found at the rear of the AEG, right where you expect it to be! This stock is one of the best PDW stock designs for Airsoft, as it provides the compact form factor to allow for easy transportation and storage whilst still providing enough space for standard M4/AR15 buffer tube stick batteries. We recommend a 7.4V 1300mAh LiPo battery for the PX9 to provide the best possible trigger response and prolong the life of the AEGs ETU. To access the battery compartment, simply extend the stock and pull the tab with the allen screw in downwards, which should allow the bottom part of the stock tube to come free. Inside you will find the mini-tamiya connector to which you connect your battery.
Now, onto the internals, and you are going to be as surprised as we are! The PX9 has its own programmable electronic trigger unit, which can be set up for either 3 or 5 round bursts, either replacing semi auto or full auto! This is very useful for Airsoft skirmishes with limited magazine capacity, as it will help you avoid the temptation to spray the enemy down, whilst saving that ability for when it is absolutely necessary. For information on how to program the ETU, see the "Special Instructions" section below. The ETU also provides motor and battery protection, and will prevent the PX9 from being fired when the battery is low and potentially damaging the cells.
The most notable part within the PX9 is its 6.03mm tightbore inner barrel, which provides excellent accuracy in such a short package, in concert with the rotary adjustable HOP-up unit. It is rare to find such a feature packed AEG at this price range that isn't a bog-standard M4, seeing this in an AR-9 is refreshing, to say the least! Also present inside the PX9 are 9mm bearing bushings, keeping the gearbox running smoothly, and a quick change spring system, which can be useful for those who want to personally tune their PX9 to their local site's FPS limt. There is little need to do so, as when tested the PX9 shoots right around 340 FPS +/- 10%, putting it in that sweet spot where you can be sure environmental factors cannot cause your AEG to creep up and shoot above limits whilst being right up there at the edge of what is allowed at most skirmish sites!
Features
- Reinforced polymer construction
- Tightbore inner barrel
- Pre-installed programmable ETU
- Compatible with ARP-9 magazines
- Hybrid Picatinny M-LOK handguard
- 20mm Picatinny railed receiver
- Sound amplifying muzzle device
- 14mm CCW male threads for suppressors and tracers
- Flip up aperture iron sights included
- Compact PDW stock which fits M4/AR15 buffer tube batteries
Package Includes
- Classic Army PX9 Submachine Gun AEG
- 120 rnd Medium Capacity Magazine
- Speed Loader
- User Manual
Specification
General
 |
Submachine Gun
|
|---|---|
 |
Yes
|
 |
Yes,
No,
|
 |
Approx. 340fps ± 10%, using 0.20g BB
|
 |
Yes
|
 |
Yes
|
 |
|
 |
Starter, Regular Player,
|
Weight and Dimension
 |
Approx. 1.7kg
|
|---|---|
 |
52cm
|
 |
61cm
|
Construction
 |
Black
|
|---|---|
 |
Polymer handguard, muzzle device, receiver, pistol grip and stock body. Alloy outer barrel and stock cheek rest. Steel stock bars.
|
|
|
Polymer
Alloy
Steel
|
 |
Polymer
Alloy
Aluminium
Steel
|
Weapon Specific
 |
Electric
|
|---|---|
 |
None
|
 |
Long Gun, Submachine Gun, AR 9mm,
|
 |
Long Gun Magazine, Sub Machine Gun, G&G ARP-9, Classic Army Nemesis X9, Classic Army PX9,
|
 |
   |
 |
Trigger Lock
|
 |
Right Handed
|
 |
Standard
|
 |
1:1
|
 |
0.25g
|
Hop-Up
 |
Yes
|
|---|---|
 |
Rotary
|
 |
Behind mock bolt carrier, accessible when the charging handle is held to the rear.
|
Furniture
 |
|
|---|---|
 |
20mm RIS / RAS , MLOK Rail System, 20mm Railed Receiver,
|
 |
Sliding , Multi-Position ,
|
|
|
2 Position
|
 |
Iron Sights , Aperture Iron Sight,
|
 |
Stock , QD ,
|
Barrel
|
Outer Barrel Length (in)
|
5''
|
|---|---|
 |
Male
|
 |
CCW (Counter Clockwise)
|
 |
14mm
|
 |
6.03mm
|
 |
160mm
|
Magazine Specific
 |
Medium Capacity , AEG,
|
|---|---|
 |
Approx. 120 Rounds
|
 |
Speed Loader
|
 |
Top
|
Electric Gun Specific Information
Gearbox
|
|
V2 Gearbox
|
|---|---|
 |
Rear Wired
|
 |
Yes
|
 |
Yes
|
 |
No
|
Motor
 |
Standard
|
|---|
Battery Specific
 |
 |
|---|
Suggested Battery
 |
Li-Po
|
|---|---|
 |
Stick
|
 |
7.4v
|
Product Testing Data
 |
340 FPS +/- 10%
|
|---|---|
|
|
0.2g ASG BLASTER
|
|
|
25/02/2022
|
Further Information
Classic Army ETU Programming Instructions
Inside your Classic Army PX9 you will find an instruction manual with all the details on how to set up you ETU in various configurations. In case you lose the instructions, or you are just having a nosy, here is how to program your CA ETU:
Please ensure your AEG is clear of all BBs, the magazine is removed, and eye protection is worn throughout this process.
Step 1: Set your fire selector to "SEMI"
Step 2: Depress the trigger for 5 seconds until you hear the ETU beeping
Step 3: Release the Trigger (the ETU will continue to beep - the beeps denote the current settings)
Step 4: Depress the trigger and hold it for 3 seconds
Step 5: Release the trigger once the beeping sequence changes. If you want a different setting to the one indicated by the beep sequence, repeat step 4 and 5 until you have the required settings.
Step 6: Once you have your desired setting, turn the selector to the AUTO position to store the setting.
Settings
The following is a list of the settings available for the CA ETU and the beep sequence denoting each.
- Default - SAFE-SEMI-AUTO - Beep, Pause, Beep x8
- Setting 1 - SAFE-SEMI-3 ROUND BURST - Beep, Pause, Beep x3
- Setting 2 - SAFE-3 ROUND BURST-AUTO - Beep x3, Pause, Beep x8
- Setting 3 - SAFE-5 ROUND BURST-AUTO - Beep x5, Pause, Beep x8
- Setting 4 - SAFE-SEMI-SEMI - Beep, Pause, Beep
Size guide
Joule Charts
Special Instructions
These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.
FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.
Tap the tabs below to open the relevant chart for your replica.
This table should be used for reference, and cannot be used to check one weight against another, as the weight of the BB affects the power.
In order to check if the BB can be used with your replica chronograph using the weight you wish to use and then compare it against the table.
Every time you change weights you will need to re-chrono and check against the table. This is not a conversion chart between weights.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 325 | 0.98 | 1.23 | 1.37 | 1.47 | 1.57 | 1.77 | 1.96 | 2.11 | 2.21 | 2.45 |
| 328 | 1.00 | 1.25 | 1.40 | 1.50 | 1.60 | 1.80 | 2.00 | 2.15 | 2.25 | 2.50 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 335 | 1.04 | 1.30 | 1.46 | 1.56 | 1.67 | 1.88 | 2.09 | 2.24 | 2.35 | 2.61 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 345 | 1.11 | 1.38 | 1.55 | 1.66 | 1.77 | 1.99 | 2.21 | 2.38 | 2.49 | 2.76 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 355 | 1.17 | 1.46 | 1.64 | 1.76 | 1.87 | 2.11 | 2.34 | 2.52 | 2.63 | 2.93 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
| 370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
| 380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
| 390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
| 400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
| 410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
| 370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
| 380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
| 390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
| 400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
| 410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
| 420 | 1.64 | 2.05 | 2.29 | 2.46 | 2.62 | 2.95 | 3.28 | 3.52 | 3.69 | 4.10 |
| 430 | 1.72 | 2.15 | 2.40 | 2.58 | 2.75 | 3.09 | 3.44 | 3.69 | 3.86 | 4.29 |
| 440 | 1.80 | 2.25 | 2.52 | 2.70 | 2.88 | 3.24 | 3.60 | 3.87 | 4.05 | 4.50 |
| 450 | 1.88 | 2.35 | 2.63 | 2.82 | 3.01 | 3.39 | 3.76 | 4.04 | 4.23 | 4.70 |
| 460 | 1.97 | 2.46 | 2.75 | 2.95 | 3.15 | 3.54 | 3.93 | 4.23 | 4.42 | 4.91 |
| 470 | 2.05 | 2.57 | 2.87 | 3.08 | 3.28 | 3.69 | 4.10 | 4.41 | 4.62 | 5.13 |
| 480 | 2.14 | 2.68 | 3.00 | 3.21 | 3.42 | 3.85 | 4.28 | 4.60 | 4.82 | 5.35 |
| 490 | 2.23 | 2.79 | 3.12 | 3.35 | 3.57 | 4.02 | 4.46 | 4.80 | 5.02 | 5.58 |
| 500 | 2.32 | 2.90 | 3.25 | 3.48 | 3.72 | 4.18 | 4.65 | 4.99 | 5.23 | 5.81 |
| 510 | 2.42 | 3.02 | 3.38 | 3.62 | 3.87 | 4.35 | 4.83 | 5.20 | 5.44 | 6.04 |
Need ideas for something extra?
- Bottles or Bags
- 0.25g Standard BBs
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are standard 0.25g BBs which are designed to work in any Airsoft gun, performing best in Airsoft guns which fire between 280fps - 370fps, and are the go-to weight for any Airsoft skirmisher looking for an the perfect all around weight for a standard AEG. Whether you're new to Airsoft, or a regular skirmisher, this weight of BB will most likely be your go-to BB weight, and is the most commonly used by Airsoft players.
- 22,000 Shot Life
- 35 BBs Per Second
- GemTech Licensed
An AceTech Tracer Unit, which is concealed inside a fully licensed and CNC Machined Aluminium constructed replica of a GM-9 Suppressor from GemTech, a manufacturer of Suppressor for Real World Firearms. The internal LiPo battery can last for up to 22,000 shots, and can keep up with up to 35 BBs per second for maximum performance.
- 3MOA Target Dot
- Alloy Constructed
- High/Low Profile Mount
A robust and reliable Red Dot Sight for Airsoft Guns that have a 20mm Rail System. Supplied with both a High Profile and Low Profile Mount, this Sight features a 3MOA Target Dot with seven Brightness Levels, one of which is dim enough for Night Vision Devices.
- 0.25g BIO BBs
- Bottles or Bags
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are BIO 0.25g BBs which are created from biodegradable materials so that they will gradually break down with time when exposed to natural environments. Touted as a more environmentally friendly BB, they are sometimes required by certain Airsoft sites to play.
This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.
- Foam Filled
- Spring Core
- 14mm CCW / CW
An Alloy constructed Suppressor with Foam Baffles and a Spring Core for support. The end caps of the Suppressor can be unscrewed to access the internals. Designed for Airsoft replicas with a 14mm CCW or CW Thread, this Muzzle Device is the perfect accessory to conceal an Inner Barrel extension, or just to add a personal touch to your Airsoft Gun.
This suppressor has a clever feature which is that it has a 14mm CCW thread on one end and a 14mm CW thread on the other, as such it is compatible with both thread types.
- 3 MOA Target Dot
- 1 MOA Adjustment
- Waterproof & Rugged
A T-1 style optic which is protected by tough Rubber Armour, has eleven levels of brightness on its' 3 MOA Target Dot and comes included with both a high and low profile 20mm mount. Enjoy real-steel quality at Airsoft prices.
- Bio BBs
- High gloss finish
- 1000 x 0.25g
Looks like TIPPMANN is moving closer and closer to Airsoft, take that paintballers! The TIPPMAN Eco-Green BBs are constructed from bioplastics with up to 92% degradation, making these BBs an eco friendly alternative to standard ABS BBs! This pack includes 1000 x 0.25g BBs and is supplied in a resealable bag. These BBs are available in classic white or high visibility orange, making your BBs easier to track to the target.
- Illuminates BBs
- Rechargeable Battery
- Motion Sensor On/Off
A compact and modern-looking Tracer Unit for Airsoft Guns w/ a 14mm CCW Threaded Barrel, which will illuminate Tracer BBs to light up the night sky, and help you track your BBs to their target. Featuring high power UV LEDs, a power-saving motion sensor function and an internal rechargeable lithium battery, this is a fine example of a modern Airsoft Tracer Unit.
- 3MOA Target Dot
- Special VE Warranty
- Super Clear Sight Picture
An ULTRA compact, Full Metal 20mm / Pistol Weaver red dot sight designed for use on pistols / short dots & LPVO's as an RMR or as a back up sight. It has a 3MOA target dot and auto adjusting brightness levels according to your environment lighting.
This product is covered by the Vector Optics Lifetime warranty, for more information please read below.
Like this Airsoft Gun? Check out these awesome Products!
- £20 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- £10 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- Slide Forward to Open
- Available in Multiple Sizes
- 40mm MOSCART Launcher
Available in multiple sizes these 40mm Under Barrel Mounted Airsoft Grenade Launchers are designed to fire 40mm MOSCART Grenade, and can be attached to the underside of a range of Airsoft Rifles.
- Full metal construction
- Matt black with gold outer barrel
- Combat styled Hi-capa long boi
If your friends are using the R604, this pistol is the key to making them feel inadequate! Introducing the R608 Hi-capa Combat XL from Army Armament, a Hi-capa based pistol with a combat leaning, now in a new, lengthened flavour! The pistol combines the well liked aggressively stippled grips of the R604 and JW3 GBB pistols with a shorter dust cover and 5.5-inch outer barrel with extended slide; akin to the original "Silverballer" of the well-known man of hits video game but in a slightly more practical length!
- Full metal construction
- Functional De-cocking lever
- 20mm frame rail and 12mm female threaded barrel
If you are eyeing up a new sidearm but aren't up for the more common Hi-capa and EU series perhaps a classic Italian designed pistol would suit your tastes? Introducing the Raven R9 GBB, Raven's entry into the B9 series of Airsoft pistols. The real B9 was most famously issued to the US Army in the 1980s, replacing the venerable M1911.
- 1:1 Scale Replica
- Supreme build quality
- Beautiful licensed H&K trademarks
If you are after a DMR to match your UKSF loadout, you have found it. The Umarex HK417D AEG is a seriously well built and faithful replica of the HK417, chosen marksman's rifle for special forces all around the world. Put this down next to a real HK417 and you will be hard-pressed to pick out the right one for your Milsim skirmish!
- Textured Grip
- CO2 Compatible
- Square Ironsight
A Gas Blowback Airsoft Pistol built by WE Europe as part of their EU-Series Pistol Range, and is a more compact version of the standard sized EU-Series pistol.
- Accurate Replica
- All Alloy Construction
- Period Authentic Replica
A realistic gas blowback Airsoft replica B9 handgun constructed from alloy and with accurate controls, it is perfect for skirmishing.
- Full metal construction
- Ares E.F.C.S inside
- 7.62mm AR - Perfect for a DMR build
Looking for the base gun for your Airsoft DMR build? The Ares AR-308 series are uniquely equipped for this role, being patterned after real steel AR-10 battle rifles, the M4/AR15's big brother. The AR-308 series are built to dominate, being kitted out with a high torque motor, quick change spring system, the Ares EFCS trigger unit and a rotary HOP-up unit with the opportunity to lock the AEG to semi, either using an Ares programmer unit or mechanically by installing a replacement selector lever if you want to build the inside of the AR-308 to suit the DMR styling of the externals.
The AR-308M is the mid-length offering in the AR-308 line and makes use of a 12.5-inch outer barrel with a 12-inch M-LOK handguard, and the unique Ares Pro stock, offering 5 positions of adjustment. The external build quality of this AEG is absolutely exceptional, with razor-sharp machining throughout and a beautiful matt metallic bronze finish applied. We aren't sure what is more impressive; the high-quality feel of this AEG or its exceptional trigger response and rate of fire, which our fingers cannot outrun on a 7.4V LiPo!
- SR-25 Flip Up Sights
- High Density Polymers
- Excellent Starter Weapon
A nearly full Polymer Airsoft electric M4 with a 20mm handguard rail system that uses extremely high density Polymers like that found on G&G branded Airsoft guns to bring the weapon to a very pleasant weight and feel in the hands.
- Textured Grip
- Decocking Lever
- Gas Blowback Pistol
A Gas Blowback 6mm BB Airsoft Pistol, based on the Sig Sauer P229 service pistol, used by U.S. Government Forces and more.
- 14mm CCW Thread
- Licensed Rail System
- MK18 Platform Replica
This Airsoft Electric Gun is based on the MK18 Platform, and is essentially a Specna Arms CORE Series Replica with a fully licensed Daniel Defense 20mm MK18 Rail System. The MK18 is highly regarded for its' awesome looks, and this is no exception. This is an ideal Starter Gun, or a step-up in quality for someone looking for their next Primary.
- MOSFET System
- POLYMER Version
- KeyMod Rail System
An Airsoft 6mm BB Gun, based on the M4, this is the latest version of the G&G Combat Machine. The weapon is constructed almost entirely from polymer including the Receiver, Stock, Pistol Grip with parts like the Magazine and Stock Tube being alloy.
- Full Alloy Design
- High Quality Finish
- Gas Blowback Pistol
A high quality, faithful, Airsoft 6mm BB replica of the Colt 1911A World War 2 (WWII) .45 ACP Pistol. This highly detailed piece really stands out from the crowd with the satisfying recoil and loud report when it fires.
- M-LOK Compatible
- Dynamic AK Platform
- Multiple Stock Variants
A 6mm BB Airsoft Electric Gun, based on the AK-102, and given a comprehensive overhaul, creating an Operator Platform that is incredibly dynamic.
- Fiberglass Polymer
- 14mm CCW Thread
- KeyMod Handguard
G&G have added yet another masterpiece to their infallible Combat Machine series, which features an 8.5" KeyMod Rail System, 14mm CCW Thread, Flip Up Ironsights and a Sliding Crane Stock for Crane Stock style Batteries.
- Compact CQB Weapon
- Rails for Sights and Accessories
- High Capacity M4 Magazine Adaptor
An Airsoft 6mm Airsoft AEG replica designed to look like the FN P90, produced by FN Herstal in Belgium, supplied with an adaptor to allow the use of m4 magazines including the provided STANAG highcap.
- Folding Stock
- Folding Foregrip
- Railed Hand Guard
An Electric Airsoft rifle based on the world famous and seemingly timeless AK47, now updated with a more practical, and tactical configuration! Complete with a side folding stock, folding vertical foregrip and handguards sporting 20mm Picatinny rails, the CM.028U is perfect for PMC impressionists, and those who want something with rails which isn't an M4!