Double Eagle M907E Fire Control System Edition

Double Eagle
Code:
£189.99
  • FALCON EFCS System
  • 1-5 Round Burst Mode
  • MLOK Handguard

The M907E is one of the latest guns from Double Eagle (DE) Airsoft featuring their latest Electronic Fire Control System which allows for 1-5 Round Burst, a Bump fire Trigger, and boasts a gearbox and battery protection system. Not only does the replica come with an intelligent control system, it is based off he M4 platform, and comes with a full length top rail and MLOK hand guard to many customisation options.

Full description

Description

The gun features an Alloy Hand guard, Receiver, Buffer Tube and Internals, with a Polymer Stock and Pistol Grip, and has a high quality finish.

If you're looking for an AEG with some truly unique features you've come to the right place: the replica features Double Eagles latest creation, the FALCON EFCS fire control system. Usually only seen in custom builds and high end AEG this feature is a welcome inclusion, allowing for 1-5 round bust mode, a bump fire trigger, as well as various gun and battery protection features to boot. The 1-5 round burst mode and bump fire settings can also be set at the same time, with bump-fire being used in semi-auto mode, and 1-5 round burst replacing the full auto mode. The fire control system is designed to be used with 7.4v Li-Po and 11.1v Li-Po and prevents the replica from firing when it detects a current draw spike, or if the battery voltage is too low. The EFCS fire system is configurable using simple trigger pulls and requires no external tools, special adaptors or a PC to function. For more information please see the Special Instructions Section.

The replica is fully ambidextrous for use during an Airsoft Skirmish, with an ambidextrous fire select and magazine release, something rarely seen in Airsoft M4 replica. The fire select is even raised to make it easier to select your fire mode even when wearing gloves. The mock charging handle is also ambidextrous, as well as the stock adjustment release, with sling QD loop mount points available on both sides.

If your looking to modify the furniture on the gun you have plenty of options, with a full top length 20mm RIS / RAS rail for attaching red dots, holographic, and even large sight and scope set ups, and an MLOK hand-guard for attaching modular components. If the stock of the replica isn't to taste it can be removed, as well as the front flash hider for replacing with suppressors and tracer units.

In the box you are supplied with the replica, a 300rnd High Capacity wheel wound magazine, and instructions, as well as a battery adaptor to allow deans batteries to be used, a magazine winding key and replacement deans connector should you want to re-wire the replica straight to deans.

This AEG is great for those Airsoft Skirmishers who are looking for a high end gun, at a mid-range price. With plenty of space for external upgrades and an electronic control system in place this replica has features which will make the mouths water of even the most seasoned Airsoft Skirmishers.

Features

  • Features Double Eagles brand new FALCON Electronic Gearbox Design
  • Based on the M4 / AR Platform
  • Electric powered Airsoft AEG
  • Compact CQB Variant
  • Compatible with 7.4v and 11.1v battery
  • FALCON EFCS Gearbox and Battery Protection
  • 1-5 Shot Fire selection mode
  • Trigger sensitivity adjustment
  • Bump fire trigger mode
  • Bump mode for semi-auto trigger mode
  • 1-5 Shot fire select for full auto mode
  • Full metal Receiver, hand guard and buffer tube
  • Polymer Pistol Grip and stock
  • MLOK hand guard
  • Removable flash hider
  • Mock charging handle which pulls back to reveal the hop-up unit
  • Mock bolt release which releases the mock bolt plate
  • Mock ambidextrous bolt release
  • Ambidextrous magazine release
  • Integrated receiver QD Sling loop mount points
  • Radial adjustable hop-up unit for accuracy and precision
  • Straight, flat trigger
  • Flared trigger guard
  • Raised fire select switch for easy use even with gloves
  • Textured ergonomic pistol grip
  • Adjustable motor screw height
  • Flip up removable ironsights for 20mm RIS/RAS rail
  • Full top length 20mm RIS / RAS rail
  • Removable flash hider secured by grub screw
  • Six position adjustable tactical stock
  • Rubberised butt plate
  • Branded:
    • 'FALCON Fire Control System'
    • 'DE AIRSOFT'

Package Includes

  • M907E Fire Control System Edition
  • Magazine
  • Instruction Manual
  • Tamiya to Deans connector
  • Deans Female Connector
  • Magazine Winding Key

Special Instructions

Please note that the gun's EFCS system is only compatible with 7.4v LiPo and 11.1v LiPo, and is not compatible with LiFe or NiMh battery.

Please note that both bump fire and burst modes can be set, as bump fire is applied to semi, and 1-5 fire mode is applied to full auto.

Please note that fitting the supplied deans connector will constitute modification of the replica, and will not be able to be returned.

FALCON EFCS Protection Feature

Gearbox Protection

When the current is too high or abnormal the power supply on the EFCS will disconnect to protect the motor and battery, and the motor will vibrate three times.

If the voltage of the battery is too high the EFCS power supply will automatically disconnect and the motor will vibrate two times.

Battery Protection

The FALCON is compatible with 7.4v and 11.1v LiPo battery only, with an operating voltage between 6-13v. If the voltage is too low or too high the power supply will be cut. 

When using an 11.1v LiPo the low voltage protection system will notify the user via 5 vibrations, indicating the batteries voltage is too low to be used.

Vibration Description

  • 1 - Power On
  • 2 - System Error
  • 3 - Voltage too high
  • 5 - Low Voltage

Falcon Electronic Fire Control System

1-5 Shot Mode

  • Set the fire select to SAFE.
  • Pull the trigger and hold for 3 seconds to enter programming mode, and release when the motor makes a sound.
  • Pull the trigger once and release to enter 1-5 shot programming mode, release when the motor makes a sound.
  • Pull the trigger 1-5 times depending on the amount of shots you want a single trigger pull to make.
  • Set the fire select to full auto.

Trigger Sensitivity

  • Set the fire select to SAFE.
  • Pull the trigger and hold for 3 seconds to enter programming mode, and release when the motor makes a sound.
  • Pull the trigger twice and release to enter sensitivity programming mode, release when the motor makes a sound.
  • Pull the trigger between 1-3 times for different levels of sensitivity.
    • 1 - Highest Sensitivity
    • 2 - Standard Sensitivity
    • 3 - Low Sensitivity

Bump Fire Mode

  • Set the fire select to SAFE.
  • Pull the trigger and hold for 3 seconds to enter programming mode, and release when the motor makes a sound.
  • Pull the trigger three times and release to enter bump fire programming mode, release when the motor makes a sound.
  • Set the fire selector to semi-auto
  • Repeat the same process to disable bump fire

Reset to Default

  • Set the fire select to SAFE.
  • Pull the trigger and hold for 5 seconds to reset all settings.



Specification

General

Weapon Construction External
Weapon Type
Assault Rifle
Over 18 Only Icon
Over 18
Yes
Icon UKARA - United Kingdom Airsoft Retailer Association
Defence / UKARA Required
Yes, No,
FPS Icon
FPS (Feet Per Second), using 0.20g BB
Approx. 340fps ± 10%, using 0.20g BB
Site Legal Icon
Site Legal, using 0.20g BB
Yes
Screwdriver Icon
Pre-Built
Yes
Package
Included Items
  • Magazine
  • Instruction Manual
  • Allen Key
  • Magazine Winding Key
  • Female Deans to Female Mini Tamiya Adaptor
  • Deans Connector Kit
Skill Level Icon
User Skill Level
Regular Player
Patrol Base - Warning Icon
Warnings
Only works using LiPo battery

Weight and Dimension

Weight KG Icon
Weight (KG)
Approx. 2.45kg
Weapon Length Collapsed
Length (Collapsed)
62cm
Weapon Length Extended
Length (Extended)
70cm

Construction

Colour Wheel Greyscale
Primary Colour
Black
Colour Wheel Greyscale
Secondary Colour
Black
Two Tone Icon
Pre Two-Toned
No
Construction Icon
Construction
Alloy Hand guard, Receiver, Buffer Tube and Internals, with a Polymer Stock and Pistol Grip
Weapon Construction External
External Construction
Polymer
Alloy
Rubber
Gearbox Icon
Internal Construction
Polymer
Alloy

Weapon Specific

Power Source Icon
Powered By
Electric
Blowback Icon
Blowback
None
Weapon Platform
M4 / AR15 / M16
Magazine Style Icon
Magazine Style
STANAG
Fire Select Icon
Fire Selector
PatrolBase | Fire Select Safe
Safe
Patrol Base | Fire Select - Semi Automatic
Semi Automatic
Patrol Base | Full Automatic
Full Automatic
Patrol Base | Burst
Burst
Programmable
Bump Fire
Weapon Safety Features Icon
Safety Features
Trigger Disconnect
Shooter Configuration Icon
Shooter Configuration
Ambidextrous
Weapon Configuration Icon
Weapon Configuration
Standard
Internal Variants
Standard Gears
Standard Gears
Weapon Scale Icon
Weapon Scale
1:1
Suggested BB Weight
0.25g

Hop-Up

Hop-Up Unit Icon
Hop-Up Unit
Yes
Hop-Up Unit Adjuster Icon
Hop-Up Adjuster
Rotary
Hop-Up Unit Location Icon
Hop-Up Location
Adjustable behind mock bolt plate when charging handle to the rear

Furniture

Weapon Furniture Icon
Furniture
  • Railed Handguard
  • Flip-Up Ironsights
  • Railed Receiver
  • Ambidextrous Charging Handle
  • Ambidextrous Magazine Release
  • Flash Hider
  • Ambidextrous Fire Selector
  • MLOK Rail System
  • QD Sling Point
  • Adjustable Stock
  • Electronic Trigger Unit
Rail System Icon
Rail System
20mm RIS / RAS , MLOK Rail System,
Icon Stock Positions
Stock Setting
Sliding
Weapon Length Extended
Stock Positions
6 Position
Sight Type Icon
Sight Type
Iron Sights
Sling Plate Icon
Sling Options
Stock , QD , Receiver ,

Barrel

Icon Thread Type
Outer Barrel Thread Type
Male
Outer Barrel Thread Size
14mm
Inner Barrel Length
210mm

Magazine Specific

Magazine Type
High Capacity, Wheel Wound,
Magazine BB Capacity
Approx. 300 Rounds
Magazine BB Fill Method
Fill Window
Magazine BB Fill Location
Top

Electric Gun Specific Information

Gearbox
Gearbox Icon
Gearbox Version
V2 Gearbox
Wiring Icon
Gearbox Wiring
Rear Wired
Battery Specific
Battery Connector
Patrol Base | Icon | Mini Tamiya
Mini Tamiya
,
Mini Tamiya to Deans
Mini Tamiya to Deans Adaptor
,
Suggested Battery
Suggested Battery Type
Li-Po
Suggested Battery Configuration
Stick
Suggested Battery Voltage
11.1v

Product Testing Data

Notepad Icon
Test Description
Tested using 0.20g BB
Notepad Icon
Tested Using
ASG Devil .20g
Notepad Icon
Test Date
06/05/20

Take this Airsoft gun to the next level!

Like this Airsoft Gun? Check out these awesome Products!