FMA Airsoft

A set of Tactical Goggles for Airsoft use, that have a Smoked/Tinted Polycarbonate Lens to provide protection from BB hits, and to reduce glare from ambient light, making daylight operations much easier. The Goggles connect directly to the Rails on FAST Helmets, for hassle-free and secure mounting, without an annoying headstrap to slip down your head whenever you move about. If you own a FAST Helmet and want a secure and 'proper' way to mount Goggles to your lid, then the FMA FAST Helmet Goggles are ideal.

A set of Tactical Goggles for Airsoft use, that have a Smoked/Tinted Polycarbonate Lens to provide protection from BB hits, and to reduce glare from ambient light, making daylight operations much easier. The Goggles connect directly to the Rails on FAST Helmets, for hassle-free and secure mounting, without an annoying headstrap to slip down your head whenever you move about. If you own a FAST Helmet and want a secure and 'proper' way to mount Goggles to your lid, then the FMA FAST Helmet Goggles are ideal.

A Polymer constructed set of adaptors for railed helmets, allowing you to install 20mm accessories to your helmet setup.

A mock Airsoft suppressor designed to be attached to the end of Airsoft Rifles to give them a more unique look, and to slightly suppress the sound leaving the barrel. This is the perfect purchase for those who are looking for a suppressor that can be attached to a huge variety of weapons, or for those looking to dampen the noise made from the end of the weapon.

A helmet of exceptional quality from FMA, with memory foam inserts, rotary adjustment dial, shaped chin strap, velcro patches, side rails, NVG mounts, several ventilation holes and easy, full adjustment of sizing.

A mock PEQ Box, designed to hold PEQ size Airsoft batteries, but can be extended with the use of an included extension module for larger batteries.

A tough lower face Mandible for Fast Helmets which will protect your smile and make your helmet set up look absolutely boss, without compromising your ability to breathe.

A tough lower face Mandible for Fast Helmets which will protect your smile and make your helmet set up look absolutely boss, without compromising your ability to breathe.

A tough lower face Mandible for Fast Helmets which will protect your smile and make your helmet set up look absolutely boss, without compromising your ability to breathe.

This is an updated version of the Dummy PRC-152 we had in a while ago. This time around it has much nicer Polymers, a better look, tougher construction and the dummy battery can now be removed.

A Polymer constructed Hard Case for Pistols and other small equipment, which has internal dimensions of 26x19.5x8cm. It comes included with two layers of Pick N Pluck foam so that you can make a perfect space for your kit, and is secured by two heavy-duty clasps which can be padlocked shut.

A Polymer constructed Hard Case for Pistols and other small equipment, which has internal dimensions of 26x19.5x8cm. It comes included with two layers of Pick N Pluck foam so that you can make a perfect space for your kit, and is secured by two heavy-duty clasps which can be padlocked shut.

If you are sick of stinging headshots, a helmet will cure that! The FAST Maritime Helmet Replica from FMA is a Milsim-friendly way to keep your head protected in game and comes kitted out with ARC accessory rails and an NVG mount so you can dress it up in true SF style. This helmet is constructed from high density polymer with a textured surface finish which matches the real thing perfectly but is not ballistic and is only designed for looks. 

The real steel version of this helmet is used by DEVGRU, the Green Berets, the 75th Ranger Regiment and the Marine Raider Regiment (MRR/MSOR) and is a close match for the LBH Helmet used by the US Navy SEALs, making it a fine choice for the Milsim inclined. If you want to avoid painful headshots and look elite at the same time, this is the way to do it!

If you are sick of stinging headshots, a helmet will cure that! The FAST Maritime Helmet Replica from FMA is a Milsim-friendly way to keep your head protected in game and comes kitted out with ARC accessory rails and an NVG mount so you can dress it up in true SF style. This helmet is constructed from high density polymer with a textured surface finish which matches the real thing perfectly but is not ballistic and is only designed for looks. 

The real steel version of this helmet is used by DEVGRU, the Green Berets, the 75th Ranger Regiment and the Marine Raider Regiment (MRR/MSOR) and is a close match for the LBH Helmet used by the US Navy SEALs, making it a fine choice for the Milsim inclined. If you want to avoid painful headshots and look elite at the same time, this is the way to do it!

If you are sick of stinging headshots, a helmet will cure that! The FAST Maritime Helmet Replica from FMA is a Milsim-friendly way to keep your head protected in game and comes kitted out with ARC accessory rails and an NVG mount so you can dress it up in true SF style. This helmet is constructed from high density polymer with a textured surface finish which matches the real thing perfectly but is not ballistic and is only designed for looks. 

The real steel version of this helmet is used by DEVGRU, the Green Berets, the 75th Ranger Regiment and the Marine Raider Regiment (MRR/MSOR) and is a close match for the LBH Helmet used by the US Navy SEALs, making it a fine choice for the Milsim inclined. If you want to avoid painful headshots and look elite at the same time, this is the way to do it!

If you are in the middle of a helmet build and it looks a little bare, consider the Accessory Pouch Gen.2 by FMA. This pouch is modelled after pouches used for NVG counter weights and battery packs, but can be put to whatever use you need on the skirmish field.

Is your replica FAST helmet too shiny, like a bald mans head? Don't fancy painting it? The FMA maritime helmet cover solves this issue whilst providing excellent function with its camo fabric and extra loops for foliage if you want to truly disappear in the woods. 

A lightweight and breathable Airsoft half face mask which has fabric sides, allowing you to aim down your sights much easier than with conventional lower face protection.

If you want to protect your lower face, but would rather look like a real life future soldier than an Airsoft Skirmisher, the Helmet Mandible Guard from FMA has your 6! Constructed from high density polymer, this Mandible guard set protects your lower face, and mounts to any FAST type helmet via its ARC accessory rails. The angular, modern design of the Mandible guard gives it a sleek look, especially when mounted to a well-setup FAST helmet. The Mandible guard also folds up, making it easy to stash in your kitbag at the end of the day's skirmishing!

If you want to protect your lower face, but would rather look like a real life future soldier than an Airsoft Skirmisher, the Helmet Mandible Guard from FMA has your 6! Constructed from high density polymer, this Mandible guard set protects your lower face, and mounts to any FAST type helmet via its ARC accessory rails. The angular, modern design of the Mandible guard gives it a sleek look, especially when mounted to a well-setup FAST helmet. The Mandible guard also folds up, making it easy to stash in your kitbag at the end of the day's skirmishing!

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Maritime Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

A mock PEQ Box, designed to hold PEQ size Airsoft batteries for your AEG weapon enabling easy access and storage for batteries on front wired weapons by mounting onto a 20mm RIS Rail system.

If you're looking for a stylish cover for your FAST Maritime replica, the FMA Multifunctional Cover is a great shout. This helmet cover includes a built-in counterweight pouch, ideally suited to a strobe light, power bank or other small accessories. As with other helmet covers, the Multifunctional Cover includes loops for foliage and cable routing, Velcro panels for Morale andI.D patches and a cutout for the NVG mount up front. 

This cover is designed specifically for the FAST Maritime helmet cut and won't fit other FAST helmets like the PJ, Bump or Ballistic. If you operate in many different environments and like to change your camo to suit, this helmet cover can help you stay concealed and look fantastic while doing it!

A mock Airsoft suppressor designed to replicate the suppressor designed specifically for the AK series of assault rifles and carbines.

A pack of six shoot-down targets, designed to allow you to practice your shooting skills or to zero rifles. The targets are made from Alloy, and feature DCACD markings for keeping score. 

A replica MK-13 Flashbang Grenade, with some assembly required out of the box!

If you love the looks of FAST helmets but need extra airflow to keep your head cool and maintain focus, the FAST PJ Replica from FMA should suit you perfectly. This helmet replicates the real steel Para Jump/Carbon FAST helmet, featuring ARC accessory rails on each side and an NVG mount up front, complete with a protective insert. 

One of the best features of this helmet is its OCC adjustment dial, located on the rear of the suspension. The OCC dial provides perfect stability when cranked down, meaning if you have an action camera or other kit mounted to your lid it won't slide around on your head during dynamic movements. Whether you are looking for a summer alternative to a ballistic helmet replica or you want to reduce the chances of your goggles fogging, the FAST PJ Helmet Replica is the way to go! 

If you need a handling upgrade for your KeyMod-equipped primary, a stubby VFG will help you steer between targets far faster! The FMA Stubby Vertical Foregrip; KeyMod is constructed from high-density polymer with steel mounting hardware and can be fitted to any KeyMod rail system at a position of your choice. This grip is highly adaptable and can be used in multiple ways, including in a traditional vertical grip hold and with a thumb-over-bore hold. 

The grip has a ribbed exterior to enhance traction and its stubby design means it is far less likely to snag on your sling or other protruding gear. Also present is a storage compartment inside the grip, designed for CR123a batteries but equally capable of housing a small stash of tactical sweets to help you maintain energy and morale while skirmishing. The compartment can be accessed by unscrewing the base of the grip, and even includes a rubber O-ring to prevent moisture ingress. If you usually use a standard VFG and want to upgrade to something more modern, this grip is ideal!

If you need a set of lightweight iron sights to keep you covered in the event your primary sight goes down, these would work a treat! The FMA Front & Rear Flip-up Sight Set For 20mm Rails are constructed from high density polymer with steel screws and springs, and each sight is spring-loaded for fast and easy deployment when you need them.

The front sight is adjustable using an M4/AR-15 front sight adjustment tool and the rear aperture can be moved left to right without the need for tools via the dial on the right side of the rear sight. The rear sight also offers two different apertures for aiming; a small one for long range shooting and semi-automatic fire, and a larger one for close range, full auto and low light shooting. Deploying the sights is quick and easy, only requiring a press of the button on the left side of each sight, after which they will spring up into position under spring tension.

These sights mount to any 20mm Picatinny rail and are perfect for any Airsoft rifle in need of a slick set of spring-loaded sights to finish it off!

An impressive looking replacement Gas Block for your M4 GBB, designed to be as inobtrusive as possible. Due to the Gas Block's low profile, not only is it possible to fit inside Free-Float RIS type Handguards, but it also offers users an unobstructed and clear sightview;