Krylon Fusion Gloss Spray Paint; Espresso

Simply spray in quick sweeping motions from 20-30cm away, leaving a coat which dries in 15 minutes and is ok to handle after an hour. This spray paint is great for all ranges of applications: From DIY projects, to spraying bikes and sheds, boats, giving old furniture a new lease of life or spraying Airsoft platforms, making it great for all uses. 

Perfect for your next big DIY project or giving your primary a unique camouflage design. This range of products is tried and tested by us for our own special forces-inspired rattle-can jobs!

Features

• Covers up to 25 square feet on a solid surface
• Dries in 15 minutes or less
• Can be handled after one hour
• Ready for re-coat before 24 hours
• Perfect for multiple thin coats
• Chip resistant within 7 days
• No sanding or priming required
• Ideal for use in a well-ventilated area with low humidity
• Professional quality spray paint

Package Includes

• Krylon Fusion Espresso Gloss Spray Paint

Special Postage Instructions:

Please note that we can  no longer ship Krylon to none EU countries . We also require that no fewer than 4 cans be shipped outside of the UK, and we can ship no fewer than 2 cans to Northern Ireland. If we require additional postage, we will contact you via Phone or Email to arrange the additional payment. This typically applies to Northern Ireland deliveries and the Scottish Highlands. We apologise for any inconvenience caused.

If you are not from the UK Mainland, please ensure you select Northern Ireland / Republic of Ireland / Scottish Highlands, depending on your location, when you calculate your postage costs at the Checkout. If not, we will contact you via Telephone / Email.

Special Instructions

When using Krylon Spray Paint it is recommended that you spray in a well ventilated area, between 10 - 29ºC with low humidity.

Painting Tips

• Test in an inconspicuous / unseen area first.
• Shake the can vigorously for 2 minutes. Repeat every so often during use.
• Hold can 20 - 30cm away from the surface.
• Spray in a sweeping motion, keeping an even distance.
• Begin off the surface and continue with each pass
• Begin by applying a thin coat and wait 30 seconds
• Apply multiple thin coats to avoid runs and drips
• Natural items such as leaves and branches can be used as natural stencils

For Wood and Metal

• Remove all loose rust, paint and remove grease dirt and oils.
• Sand glossy or rough surfaces with sand paper (220 grit recommended).
• Apply to a dry surface.
• Prime porous or sanded surfaces, and bare wood and metal.

For Plastic & Hard Vinyl

• Remove all loose particles and apply to a dry surface.
• For New or Unweathered surfaces, quickly wipe over surface with a standard Paint Thinner.
• For Aged or Weathered Surfaces, wipe surface down with an ammonia based cleaner.

After Each Use

• After each use, clear the valve by holding the can upside down and spray until clear gas comes out.
• If the Spray Nozzle becomes clogged, wear eye protection, wipe off the button opening with lacquer thinner. Do not stick pins in the spray button opening.
• Remove over spray with paint thinner.
• Wash hands after using.