- RAVEN EU17 GBB Pistol
- 0.25g ASG BBs & Loader
- NUPROL 2.0 Green Gas
If you are looking for a Gas Blowback Pistol but you're not sure where to start, this bundle was made with you in mind! The EU17 Complete Beginner Bundle includes the RAVEN EU17 GBB Pistol finished in Pre Two-Tone Blue, ASG 0.25g BBs, a Speed Loader and a can of NUPROL 2.0 Green Gas; everything you need to get started on your Airsoft adventure (other than your choice of eye protection!).
Being finished in Pre Two-Tone means you do not need UKARA or a VCRA defence to buy this set, and also that you can skip the wait times for usual Two-Toned items. Whether you are looking for a last-minute Airsoft gift or you want to get started with an Airsoft sidearm and everything you need to get shooting, this bundle will serve you well!
- Front Rail
- Strong Action
- CO2 Blowback
A CO2 Powered Gas Blowback Airsoft Pistol, based on the real world next generation Colt 1911 'Rail Gun' .45 Pistols, with the Airsoft Version having a Strong and Crisp Blowback.
- Full metal construction
- Evolution Airsoft Duralite™ finish
- Supplied in a hard case!
If you are in the market for a 1911 GBB pistol with some added tactical features, Evolution Airsoft's new E911 GBB pistol should pique your interest! The E911 Special Operations sports full metal construction, with Evolution Airsoft's own ultra-tough Duralite™ finish, a threaded outer barrel, 20mm Picatinny frame rail, flared mag well for faster reloads and high visibility green dot iron sights.
- Tri-shot shotgun
- Fed by 30rnd mock shells
- 3x Shells included
The Double Eagle M56AL is the long version of the well liked M3 super 90 shotgun, a classic pump action shotgun design which feeds from 30rnd mock shotgun shells in the breech, and fires 3 BBs per trigger pull to appropriately simulate the spread of a real shotgun buckshot shell. The M56AL is constructed almost entirely from polymer with an alloy outer barrel and mock magazine tube, which makes this shotgun light and manoeuvrable despite its large and in charge status. Whether you fancy a challenge in CQB, or you are a fan of the movie Heat (1995), this shotgun would be an asset to your loadout.
- Hard storage case with wheels
- Ideal for rifles/SMGs up to 125cm long
- Air pressure relief valve - Great for air travel
If you're looking for a fantastic value hard rifle case packed with innovative features, the HASTA Extra Large Wheeled Rifle Hard Case is a great choice! This hard storage case is designed specifically for Airsoft guns, ideally suited to rifles, SMGs and shotguns under 125cm long. Made from strong high-density polymer with a crackle textured finish, the HASTA Extra Large Wheeled Rifle Hard Case should resist all but the most serious impacts and hides scratches well compared to standard, smooth polymer.
The HASTA Wheeled Rifle Case is secured via 7 dual-lift clasps, 5 along the opening side and one on each end, allowing you to easily get inside without the risk of the case popping open inadvertently. For even more security, two padlock holes are present, sized to fit either standard padlocks or TSA-approved air travel padlocks. Speaking of air travel, the case also features an air pressure relief valve, allowing you to release internal pressure for ease of opening on any expeditionary mission!
The wheels of HASTA's case are also very well designed, featuring rubber dampeners to muffle the enormous roar generated by other cases when wheeled over uneven ground. Its distinctive yet discrete design doesn't telegraph its contents and the unique elongated feet allow several HASTA cases of various sizes to be securely stacked together, keeping your collection neat and tidy when stored or transported in the boot of a vehicle. If your rifle is longer than the average and it needs a versatile home, treat it to a HASTA Extra Large Wheeled Rifle Hard Case, you won't look back!
- KS-1/L403A1 Suppressor
- Includes flash hider & Shroud
- Complete your British Army KS-1 build!
If you're working on a British Army KS-1/L403A1 build or you're into the latest real steel suppressor designs, the Angry Gun QDC/MCQ-PRT Suppressor with Shroud & Flash Hider belongs on your shopping list! This suppressor is constructed from CNC machined aluminium and is flawlessly finished, as we would expect from Angry Gun. The set includes the suppressor itself, the shroud (pre-installed) and the flash hider, making it ready to mount on any 14mm CCW male threaded outer barrel.
The suppressor mounts to the tri-prong flash hider via an innovative QD mechanism which requires you to index the pin on the flash hider with the corresponding groove inside the suppressor collar. With this done, turn the shroud counter-clockwise (with the front of the suppressor facing away) to tighten and lock the suppressor in place. The shroud can be removed from the suppressor but we don't recommend this as it can cause damage and ruin the QDC/MCQ-PRT's beautiful finish, which would be a real shame!
The build quality of this suppressor simply cannot be overhyped; if you put it down next to the real deal you'd be hard-pressed to tell them apart! If you're working on a KS-1 build or you want a squat, menacing suppressor in line with the latest real steel suppressor designs, the Angry Gun QDC/MCQ-PRT Suppressor with Shroud & Flash Hider belongs on your build!
- Full metal construction
- Ultra-short version - Great for CQB
- Mounts to 20mm Picatinny rails
If you need more firepower without extra length, the A&K M203 40mm MOSCART Grenade Launcher; Super Shorty is ideal. Based on the real steel M203 grenade launcher used by Arnie in Predator and serving with the US Army from the late Vietnam War right up until the present day, this M203 is the "Super Shorty" version, even shorter than the "Short" version and ideal for compact SMGs and short-barrelled rifles. The pre-installed mount is a QD example for 20mm Picatinny rails, meaning you can quickly mount it and remove it in seconds depending on the situation at hand.
Like other Airsoft M203s, the A&K Super Shorty uses 40mm MOSCART grenades as a power source and will require at least 1 grenade to function. Most MOSCARTs work like a giant shotgun, sending between 18 and 140 BBs downrange with a single pull of the trigger with a game-dominating spread, though specialised MOSCARTs which shoot different payloads are available. If you want to give your primary a more aggressive look with a firepower increase as a bonus, the A&K M203 40mm MOSCART Grenade Launcher; Super Shorty will give you what you need!
- Comms headset with active noise cancelling
- Mounts ARC, FLUX & EXFIL helmet rails
- Protect your ears from bangs and keep in touch with your team!
If you are running a FAST, FLUX helmet or EXFIL/EXF helmet and want all the advantages of an active noise-cancelling communications headset with more comfort than ever before this headset is what you need! The EARMOR M32H Electronic Comms Headset for ARC/M-LOK/EXFIL Rails is designed to give you greater comfort when wearing a fully decked-out tactical helmet.
Unlike the original M32, the M32H mounts to the external rails on practically any modern helmet, including FAST and EXFIL/EXF style helmets and the PTS MTEK FLUX. This means fewer straps to tear your hair out and the ability to quickly cool off between games by stowing the M32H without removing your helmet. This, the PLUS version is packaged with several adapters for different helmet rail types and EARMOR's latest gel padding which enhances comfort considerably!
The M32H PLUS provides all the same functions the original M32 does, including active noise cancellation which reduces the volume of sudden, loud bangs and increases the volume of environmental noises, and communications functionality when combined with the EARMOR M52 PTT and a radio. This means that you will be able to hear the whispers of the enemy team in the next room but if a grenade comes around the corner your ears will be well protected, subject to nothing more than a dull thud. Even if you don't run comms, active noise cancellation is the ideal counter to grenades in tight spaces!
- Comms headset with active noise cancelling
- Mounts ARC, FLUX & EXFIL helmet rails
- Protect your ears from bangs and keep in touch with your team!
If you are running a FAST, FLUX helmet or EXFIL/EXF helmet and want all the advantages of an active noise-cancelling communications headset with more comfort than ever before this headset is what you need! The EARMOR M32H Electronic Comms Headset for ARC/M-LOK/EXFIL Rails is designed to give you greater comfort when wearing a fully decked-out tactical helmet.
Unlike the original M32, the M32H mounts to the external rails on practically any modern helmet, including FAST and EXFIL/EXF style helmets and the PTS MTEK FLUX. This means fewer straps to tear your hair out and the ability to quickly cool off between games by stowing the M32H without removing your helmet. This, the PLUS version is packaged with several adapters for different helmet rail types and EARMOR's latest gel padding which enhances comfort considerably!
The M32H PLUS provides all the same functions the original M32 does, including active noise cancellation which reduces the volume of sudden, loud bangs and increases the volume of environmental noises, and communications functionality when combined with the EARMOR M52 PTT and a radio. This means that you will be able to hear the whispers of the enemy team in the next room but if a grenade comes around the corner your ears will be well protected, subject to nothing more than a dull thud. Even if you don't run comms, active noise cancellation is the ideal counter to grenades in tight spaces!
- Alloy/CNC alu construction
- For Tokyo Marui & CGS M4/AR-15 ZET GBBRs
- Fits standard M4/AR-15 AEG magazines
If you're planning on running your GBBR through winter or fancy mag dumping like it's going out of fashion without the dreaded "cooldown" effect, the Army Armament HPA P30 Adapter for M4/AR-15 AEG Magazines; CGS/MWS System is what you need!
A collaborative project between Army Armament and T8 Systems, this HPA adapter is designed for the Tokyo Marui M4/AR-15 ZET System and the CYMA CGS M4/AR-15 GBBR series, allowing standard AEG mags to be used along with a High Pressure Air (HPA) power source. The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter.
The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're already running HPA you probably have all the bits to make this work already and experience shoulder-thumping recoil through the frosty months!
- CNC Aluminium construction
- Mounts to 20mm Picatinny rails
- Fits EOTech, Vortex, Holosun, Sig & Trijicon magnifiers
If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount will sort that out! This mount is designed for a wide range of magnifiers and clones, including those from EOTech, Vortex, Holosun, Sig Sauer and Trijicon (for detailed compatibility see the "Full Description").
Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.
The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers the FAST Riser, FAST MRO Mount and FAST Micro Mount to facilitate this.
Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you want the elite, modern look for your primary and plenty of perks to go with it, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount belongs on your gat!
- CNC Aluminium construction
- Mounts to 20mm Picatinny rails
- Fits EOTech, Vortex, Holosun, Sig & Trijicon magnifiers
If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount will sort that out! This mount is designed for a wide range of magnifiers and clones, including those from EOTech, Vortex, Holosun, Sig Sauer and Trijicon (for detailed compatibility see the "Full Description").
Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.
The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers the FAST Riser, FAST MRO Mount and FAST Micro Mount to facilitate this.
Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you want the elite, modern look for your primary and plenty of perks to go with it, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount belongs on your gat!
- Highly Customisable
- EU Series Magazines
- Amazing Gas Efficiency
The Action Army AAP-01 Assassin GBB Pistol already has an almost cult following already, and for great reason! This Airsoft Pistol offers incredible performance (especially in cold weather), an absolutely massive backlog of compatible accessories and upgrades, accepts incredibly common EU Series Magazines and is sold at an amazingly competitive price. We may say this a lot, but trust us when we tell you that "you don't want to miss this."
- Full metal construction
- 6.03mm tightbore inner barrel
- Pre Two-Tone finish - Available next day!
A Gas Blowback Airsoft Pistol from NUPROL, this EU-Series RAVEN series EU17 is a semi-automatic pistol which runs on green gas for added realism by simulating recoil by adding blowback to each shot. The pistol is highly customisable and supports a wide range of aftermarket attachments and upgrades allowing you to make the pistol truly your own.
If you love the comfort, reliability and compatibility of the EU-Series pistols, and want something that will stand out from the crowd, then the EU17 is a sure choice. This pistol is one of the most cost-effective sidearms you can run in Airsoft!
- Very Lightweight
- Detachable Silencer
- Incredible Range & Accuracy
If you have a sneaky playstyle a MK23 belongs in your arsenal! This phenomenally quiet Airsoft NBB pistol has been the sidearm of choice for Airsoft snipers since it was released, and it isn't hard to see why!
The MK23 is super quiet thanks to its non-blowback action, and is exceptionally accurate and long ranged for a pistol in this price bracket. For those who simply must upgrade every Airsoft gun they own, the MK23 is compatible with VSR-10 style inner barrels and HOP-up buckings, meaning the accuracy potential for this pistol is practically limitless!
- High Capacity Mag
- Mock Suppressor
- Rear Wired Gearbox
This Airsoft M4 is constructed from Lightweight Polymer, and features Alloy Internals and a Rear Wired V2 Gearbox. The gun features many useful parts, when compared to the Standard M4A1 Platform, such as a Four Point RIS Rail Handguard, Suppressor and Flip-Up Iron Sights. A great starter rifle for getting into Airsoft.
- High Capacity Mag
- Mock Suppressor
- Rear Wired Gearbox
This Airsoft M4 is constructed from Lightweight Polymer, and features Alloy Internals and a Rear Wired V2 Gearbox. The gun features many useful parts, when compared to the Standard M4A1 Platform, such as a Four Point RIS Rail Handguard, Suppressor and Flip-Up Iron Sights. A great starter rifle for getting into Airsoft.
- Massive Recoil
- Official Licensed
- Upper & Lower Rail
A Co2 Gas Blowback Airsoft Pistol which is a stunning replica of the Desert Eagle .50AE, and is made to the usual high standard that Cyber Gun pride themselves on. Officially licensed and made using Alloy with a brushed steel effect, this Pistol feels great and kicks like an absolute Mule. This is NOT one to miss.
- Strong gas blowback recoil
- Full metal construction
- Front rail for attachments
Here's a pistol we all know and love. NUPROL brings us aniconic classic Airsoft replica, still widely in use today by a variety of countries for both service and recreational shooting.
A reliable gas blowback pistol, with a lightweight polymer frame and tough alloy slide, this is a go-to tried-and-true pistol for many Airsofters.
- Hard Case
- Foam Filled
- Can Be Padlocked
A hard carry case designed for any assault rifle sized replica Airsoft gun, but will suit a wide range of firearms from Airsoft, Air rifles and real firearms.
- Hard Case
- Foam Filled
- Can Be Padlocked
A hard carry case designed for any assault rifle sized replica Airsoft gun, but will suit a wide range of firearms from Airsoft, Air rifles and real firearms.
- Semi/Full auto select fire
- Short barrelled "Shinobi" AAP-01 variant
- 20mm Picatinny railed receiver and compensator
If you love the performance of the original AAP-01 Assassin but didn't get on with the looks, the AAP-01C "Shinobi" could be the AAP for you. This compact AAP-01 variant has an aggressive new look, with a snub-nosed front end and loads of accessory rails, but retains the supreme gas efficiency, rate of fire and upgradability that put the original on the map.
Constructed from high density polymer with a redesigned fire selector which is easier to use than ever before, the AAP-01C has refined the AAP-01 platform with the addition of built-in 20mm Picatinny rails on both the receiver and compensator, making it ready to rock and roll with a red dot and tactical flashlight; a game-winning combo in CQB scenarios. If you are keeping your eye out for a lightweight, performance-oriented platform which excels in all environments and won't stop performing when the weather gets chilly the AAP-01C Shinobi is one to watch!
- 4x Magnification
- 20mm Side Rails
- Backup Red Dot Sight
A compact and tactical scope for 20mm Rails, that offers a fixed 4x magnification as well as the option of a backup red dot sight for closer range engagements, and an illuminated reticule.
- Modern Revolver
- 3 x 10rnd Disk magazines included
- CO2 Powered Non Blowback
The UMAEX Elite Force H8R CO2 Revolver is an aggressive and mean looking piece of kit, featuring a modernised .357 style revolver platform and a compensated front end and equipped with 20mm Picatinny rails ready for all your accessories. You better believe the UMAREX H8R means business!
- Bolt Action
- Fully Licensed Replica
- Adjustable Cheek Rest
Fully licensed by McMillan, this bolt action 6mm BB Airsoft sniper rifle is a 1:1 scale replica of the US Marine Corps’ M40A3 sniper rifle, complete with accurate McMillan branding.
- Full MOLLE Rig
- Fully Adjustable
- 5x STANAG Pouch
With 5 x M4 pouches, 2 x pistol magazine pouches and more, this is an excellent starting point for someone who doesn't want to go through the effort of building their own rig.
- Full MOLLE Rig
- Fully Adjustable
- 5x STANAG Pouch
With 5 x M4 pouches, 2 x pistol magazine pouches and more, this is an excellent starting point for someone who doesn't want to go through the effort of building their own rig.
- Full MOLLE Rig
- Fully Adjustable
- 5x STANAG Pouch
With 5 x M4 pouches, 2 x pistol magazine pouches and more, this is an excellent starting point for someone who doesn't want to go through the effort of building their own rig.
- Lightweight Design
- Full and Semi Automatic
- Front Rail for Attachments
A Gas Blowback Airsoft Pistol manufactured and built by NUPROL as part of their RAVEN EU G-Series Pistol Range. This pistol is great for beginner and season players all the same, with both semi and fully automatic firing modes this pistol is almost guaranteed to put a smile on your face.
- Flip Out Foregrip
- Collapsible Stock
- Perfect CQB Gun
A compact and lightweight submachine gun, perfect for CQB sites or as an introductory weapon, with an instantly recognisable design, as well as rails on the top and sides for additional customisation options.