Airsoft Under £75

The Patrol Base Airsoft Gift Card has no set value so that you can pick larger values as you require them!

As the time approaches for birthdays, Christmas and special occasion gifts, it can be a bit nerve-wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique bunch; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it!

We've created our Airsoft Gift Card for this very situation. These can be purchased and redeemed against any product offered on our website or in our showroom. Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they're saving up for!

For Terms and Conditions please see our Terms and Conditions Page.

If you're looking for a fantastic value hard rifle case packed with innovative features, the HASTA Large Wheeled Rifle Hard Case is the one to go for! This hard storage case is designed specifically for Airsoft guns, ideally suited to rifles, SMGs and shotguns under 90cm long.

Made from strong high-density polymer with a crackle textured finish, the HASTA Large Wheeled Rifle Hard Case should resist all but the most serious impacts and hides scratches well compared to standard, smooth polymer. While it is designed for Airsoft, any of the HASTA Hard Case range would make a great storage box for an Air Rifle, Gel Ball Blaster or other items which need a discrete and professional storage solution.

The HASTA Wheeled Rifle Case is secured via 6 dual-lift clasps, 4 along the opening side and one on each end, allowing you to easily get inside without the risk of the case popping open inadvertently. For even more security, two padlock holes are present, sized to fit either standard padlocks or TSA-approved air travel padlocks. Speaking of air travel, the case also features an air pressure relief valve, allowing you to release internal pressure for ease of opening on any expeditionary mission!

The wheels of HASTA's case are also very well designed, featuring rubber dampeners to muffle the enormous roar generated by other cases when wheeled over uneven ground. Its distinctive yet discrete design doesn't telegraph its contents and the unique elongated feet allow several HASTA cases of various sizes to be securely stacked together, keeping your collection neat and tidy when stored or transported in the boot of a vehicle. Why not give your pride and joy first-class seating to your next event and rock the elite look with the HASTA Large Wheeled Rifle Hard Case?!

If you're looking for a fantastic value hard rifle case packed with innovative features, the HASTA Large Wheeled Rifle Hard Case is the one to go for! This hard storage case is designed specifically for Airsoft guns, ideally suited to rifles, SMGs and shotguns under 90cm long.

Made from strong high-density polymer with a crackle textured finish, the HASTA Large Wheeled Rifle Hard Case should resist all but the most serious impacts and hides scratches well compared to standard, smooth polymer. While it is designed for Airsoft, any of the HASTA Hard Case range would make a great storage box for an Air Rifle, Gel Ball Blaster or other items which need a discrete and professional storage solution.

The HASTA Wheeled Rifle Case is secured via 6 dual-lift clasps, 4 along the opening side and one on each end, allowing you to easily get inside without the risk of the case popping open inadvertently. For even more security, two padlock holes are present, sized to fit either standard padlocks or TSA-approved air travel padlocks. Speaking of air travel, the case also features an air pressure relief valve, allowing you to release internal pressure for ease of opening on any expeditionary mission!

The wheels of HASTA's case are also very well designed, featuring rubber dampeners to muffle the enormous roar generated by other cases when wheeled over uneven ground. Its distinctive yet discrete design doesn't telegraph its contents and the unique elongated feet allow several HASTA cases of various sizes to be securely stacked together, keeping your collection neat and tidy when stored or transported in the boot of a vehicle. Why not give your pride and joy first-class seating to your next event and rock the elite look with the HASTA Large Wheeled Rifle Hard Case?!

If you're looking for a fantastic value hard rifle case packed with innovative features, the HASTA Large Wheeled Rifle Hard Case is the one to go for! This hard storage case is designed specifically for Airsoft guns, ideally suited to rifles, SMGs and shotguns under 90cm long.

Made from strong high-density polymer with a crackle textured finish, the HASTA Large Wheeled Rifle Hard Case should resist all but the most serious impacts and hides scratches well compared to standard, smooth polymer. While it is designed for Airsoft, any of the HASTA Hard Case range would make a great storage box for an Air Rifle, Gel Ball Blaster or other items which need a discrete and professional storage solution.

The HASTA Wheeled Rifle Case is secured via 6 dual-lift clasps, 4 along the opening side and one on each end, allowing you to easily get inside without the risk of the case popping open inadvertently. For even more security, two padlock holes are present, sized to fit either standard padlocks or TSA-approved air travel padlocks. Speaking of air travel, the case also features an air pressure relief valve, allowing you to release internal pressure for ease of opening on any expeditionary mission!

The wheels of HASTA's case are also very well designed, featuring rubber dampeners to muffle the enormous roar generated by other cases when wheeled over uneven ground. Its distinctive yet discrete design doesn't telegraph its contents and the unique elongated feet allow several HASTA cases of various sizes to be securely stacked together, keeping your collection neat and tidy when stored or transported in the boot of a vehicle. Why not give your pride and joy first-class seating to your next event and rock the elite look with the HASTA Large Wheeled Rifle Hard Case?!

If you're looking for a fantastic value hard rifle case packed with innovative features, the HASTA Large Wheeled Rifle Hard Case is the one to go for! This hard storage case is designed specifically for Airsoft guns, ideally suited to rifles, SMGs and shotguns under 90cm long.

Made from strong high-density polymer with a crackle textured finish, the HASTA Large Wheeled Rifle Hard Case should resist all but the most serious impacts and hides scratches well compared to standard, smooth polymer. While it is designed for Airsoft, any of the HASTA Hard Case range would make a great storage box for an Air Rifle, Gel Ball Blaster or other items which need a discrete and professional storage solution.

The HASTA Wheeled Rifle Case is secured via 6 dual-lift clasps, 4 along the opening side and one on each end, allowing you to easily get inside without the risk of the case popping open inadvertently. For even more security, two padlock holes are present, sized to fit either standard padlocks or TSA-approved air travel padlocks. Speaking of air travel, the case also features an air pressure relief valve, allowing you to release internal pressure for ease of opening on any expeditionary mission!

The wheels of HASTA's case are also very well designed, featuring rubber dampeners to muffle the enormous roar generated by other cases when wheeled over uneven ground. Its distinctive yet discrete design doesn't telegraph its contents and the unique elongated feet allow several HASTA cases of various sizes to be securely stacked together, keeping your collection neat and tidy when stored or transported in the boot of a vehicle. Why not give your pride and joy first-class seating to your next event and rock the elite look with the HASTA Large Wheeled Rifle Hard Case?!

If you're looking for a fantastic value hard rifle case packed with innovative features, the HASTA Large Wheeled Rifle Hard Case is the one to go for! This hard storage case is designed specifically for Airsoft guns, ideally suited to rifles, SMGs and shotguns under 90cm long.

Made from strong high-density polymer with a crackle textured finish, the HASTA Large Wheeled Rifle Hard Case should resist all but the most serious impacts and hides scratches well compared to standard, smooth polymer. While it is designed for Airsoft, any of the HASTA Hard Case range would make a great storage box for an Air Rifle, Gel Ball Blaster or other items which need a discrete and professional storage solution.

The HASTA Wheeled Rifle Case is secured via 6 dual-lift clasps, 4 along the opening side and one on each end, allowing you to easily get inside without the risk of the case popping open inadvertently. For even more security, two padlock holes are present, sized to fit either standard padlocks or TSA-approved air travel padlocks. Speaking of air travel, the case also features an air pressure relief valve, allowing you to release internal pressure for ease of opening on any expeditionary mission!

The wheels of HASTA's case are also very well designed, featuring rubber dampeners to muffle the enormous roar generated by other cases when wheeled over uneven ground. Its distinctive yet discrete design doesn't telegraph its contents and the unique elongated feet allow several HASTA cases of various sizes to be securely stacked together, keeping your collection neat and tidy when stored or transported in the boot of a vehicle. Why not give your pride and joy first-class seating to your next event and rock the elite look with the HASTA Large Wheeled Rifle Hard Case?!

If you're adding a 40mm grenade launcher to your arsenal, you'll need some of these! The NUPROL 40mm MOSCART Gas Grenades are compatible with Airsoft 40mm MOSCART grenade launchers and are powered by green gas with various BB capacities available. Options include 60, 72, 84, 96 and 108rnd versions, with all BBs being dispensed at once in an inescapable cloud. Shoot these down a hallway and no one will escape!

The grenades can be loaded using a speed loader through the apertures on their front and the gas fill valves are also on the front/top of the shell. When filling these grenades we advise that you wear eye protection throughout the process and fill the gas before filling the BBs. As with green gas magazines, lubrication is required (100% silicone lubricant recommended) to keep the seals fresh in the long term.

If you're looking for a way to enhance your AK, AR36, AUG or SMG-5K AEG, the GATE ASTER™ SE V3 MOSFET; Expert Firmware is a fantastic option for a reasonable price! This advanced electronic trigger unit replaces your conventional trigger contacts with optical sensors, allowing for 250 different trigger sensitivity settings, burst and binary fire modes, and a plethora of other functions to be programmed in using either the trigger and fire selector or the Gate Control Station App.

It offers a fantastic balance of cost-effectiveness and performance, offering incredible efficiency improvements even before you get into the programmable features and customisation options. As with all ETU/MOSFET systems, a certain amount of expertise will be required to install the ASTER™, so if you're not confident, we suggest seeking a technician to carry out the installation process for you. This, the V3 model, is intended for version 3 AEG gearboxes found in AK, AR36, AUG and SMG-5K AEGs. If you're ready to take your AEG's performance to the next level, you're ready for the ASTER™!

If you're gearing up for a Special Forces-inspired loadout, the 8Fields Tactical Laser-Cut “Buckle Up" MOLLE Jump Plate Carrier makes that goal more affordable than ever! Made from robust 1000D polyester, this plate carrier replicates the real steel JPC, the low-profile plate carrier of choice for Special Forces operators from several nations and branches. 

The use of laser-cut MOLLE allows the JPC to maintain a lightweight and agile feel while allowing MOLLE pouches to be attached wherever needed. This variant features a solid cummerbund, providing extra protection at the sides and extra space for pouches, allowing you to choose between the high-speed, low-drag look or deck out the JPC for longer operations. 

The front panel features "buckle-up" compatibility, facilitating easy loadout changes in seconds with compatibility across a wide range of 8Fields buckle-up placards and chest rigs. The pre-installed placard fits 3 M4/AR-15 or AK-47/74 magazines, making this rig ready to rock if you're using either of these platforms. If you're after the Special Forces look on a budget, the 8Fields Tactical Laser-Cut “Buckle Up" MOLLE Jump Plate Carrier is ideal!

If you're gearing up for a Special Forces-inspired loadout, the 8Fields Tactical Laser-Cut “Buckle Up" MOLLE Jump Plate Carrier makes that goal more affordable than ever! Made from robust 1000D polyester, this plate carrier replicates the real steel JPC, the low-profile plate carrier of choice for Special Forces operators from several nations and branches. 

The use of laser-cut MOLLE allows the JPC to maintain a lightweight and agile feel while allowing MOLLE pouches to be attached wherever needed. This variant features a solid cummerbund, providing extra protection at the sides and extra space for pouches, allowing you to choose between the high-speed, low-drag look or deck out the JPC for longer operations. 

The front panel features "buckle-up" compatibility, facilitating easy loadout changes in seconds with compatibility across a wide range of 8Fields buckle-up placards and chest rigs. The pre-installed placard fits 3 M4/AR-15 or AK-47/74 magazines, making this rig ready to rock if you're using either of these platforms. If you're after the Special Forces look on a budget, the 8Fields Tactical Laser-Cut “Buckle Up" MOLLE Jump Plate Carrier is ideal!

If you're gearing up for a Special Forces-inspired loadout, the 8Fields Tactical Laser-Cut “Buckle Up" MOLLE Jump Plate Carrier makes that goal more affordable than ever! Made from robust 1000D polyester, this plate carrier replicates the real steel JPC, the low-profile plate carrier of choice for Special Forces operators from several nations and branches. 

The use of laser-cut MOLLE allows the JPC to maintain a lightweight and agile feel while allowing MOLLE pouches to be attached wherever needed. This variant features a solid cummerbund, providing extra protection at the sides and extra space for pouches, allowing you to choose between the high-speed, low-drag look or deck out the JPC for longer operations. 

The front panel features "buckle-up" compatibility, facilitating easy loadout changes in seconds with compatibility across a wide range of 8Fields buckle-up placards and chest rigs. The pre-installed placard fits 3 M4/AR-15 or AK-47/74 magazines, making this rig ready to rock if you're using either of these platforms. If you're after the Special Forces look on a budget, the 8Fields Tactical Laser-Cut “Buckle Up" MOLLE Jump Plate Carrier is ideal!

If you're gearing up for a Special Forces-inspired loadout, the 8Fields Tactical Laser-Cut “Buckle Up" MOLLE Jump Plate Carrier makes that goal more affordable than ever! Made from robust 1000D polyester, this plate carrier replicates the real steel JPC, the low-profile plate carrier of choice for Special Forces operators from several nations and branches. 

The use of laser-cut MOLLE allows the JPC to maintain a lightweight and agile feel while allowing MOLLE pouches to be attached wherever needed. This variant features a solid cummerbund, providing extra protection at the sides and extra space for pouches, allowing you to choose between the high-speed, low-drag look or deck out the JPC for longer operations. 

The front panel features "buckle-up" compatibility, facilitating easy loadout changes in seconds with compatibility across a wide range of 8Fields buckle-up placards and chest rigs. The pre-installed placard fits 3 M4/AR-15 or AK-47/74 magazines, making this rig ready to rock if you're using either of these platforms. If you're after the Special Forces look on a budget, the 8Fields Tactical Laser-Cut “Buckle Up" MOLLE Jump Plate Carrier is ideal!

If you're gearing up for a Special Forces-inspired loadout, the 8Fields Tactical Laser-Cut “Buckle Up" MOLLE Jump Plate Carrier makes that goal more affordable than ever! Made from robust 1000D polyester, this plate carrier replicates the real steel JPC, the low-profile plate carrier of choice for Special Forces operators from several nations and branches. 

The use of laser-cut MOLLE allows the JPC to maintain a lightweight and agile feel while allowing MOLLE pouches to be attached wherever needed. This variant features a solid cummerbund, providing extra protection at the sides and extra space for pouches, allowing you to choose between the high-speed, low-drag look or deck out the JPC for longer operations. 

The front panel features "buckle-up" compatibility, facilitating easy loadout changes in seconds with compatibility across a wide range of 8Fields buckle-up placards and chest rigs. The pre-installed placard fits 3 M4/AR-15 or AK-47/74 magazines, making this rig ready to rock if you're using either of these platforms. If you're after the Special Forces look on a budget, the 8Fields Tactical Laser-Cut “Buckle Up" MOLLE Jump Plate Carrier is ideal!

If you're gearing up for the elite look, the NUPROL FAST SF Next-Gen Helmet should be involved! A replica of the latest FAST helmet design to hit the real steel market, the FAST SF Next-Gen keeps all the modularity, stability and comfort of the original FAST design with improved padding and reduced weight. 

Like previous FAST designs, the Next-Gen comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll!

If you're looking for high-end eye protection with tactical styling, the Bolle Safety MY6 Eye Shield Ballistic Eye Protection Kit is ideal. With lenses made from Polycarbonate and a frame made from a Nylon/PC/TPR blend, the MY6 Eye Shield is ready to handle BB impacts, boasting EN166 F / MIL-PRF-32432A / ANSI Z87.1-2020 ballistic ratings. Along with its 3 modular lenses, this kit includes a solid carry pouch which fits everything inside, capable of being fitted to a belt or rigged to a backpack thanks to the dual straps on the rear.

To keep your view of the target clear, the lenses are equipped with Bollé's Platinum anti-fog coating which should resist fogging in all but the most hostile conditions. The nose-bridge is fitted with a non-slip surface to keep the MY6 firmly on your face at all times, and the temples are designed to be as low profile as possible to permit compatibility with active hearing protection headsets.

Lens options in the MY6 Eye Shield Kit range from standard clear lenses, great for any use, to the smoked lens for bright sunlight and the CSP lens, which cuts out blue light, ideal for bright indoor lighting conditions. If you wear prescription glasses, you'll be happy to learn that the COMBAT KIT is compatible with aftermarket prescription lens inserts from Bolle, a great way to ditch the chunky goggles or contact lenses for a better view of your target!

If you're wielding a spring or gas-powered tri-shot shotgun and need a battle-ready loadout, the Tri-Shot Shotgunner Starter Rig is the way to go! This set includes the 8Fields Tactical MOLLE Plate Carrier Vest w/ Mock Insert, 3 x 5-round Shotgun Shell Panels for MOLLE webbing and 3 packs of 6 30-round Shotgun shell magazines, giving you the protection needed to cope with stinging close-range shots with enough shells on tap that you'll never need to faff around with a speed loader in the thick of it. 

If you want to personalise your new rig, see our range of Morale and ID patches to add a touch of humour and personality. If you need assistance mounting your MOLLE pouch to your plate carrier, check out our MOLLE Guide.

If your CM.098 lower receiver is looking worse for wear, this original replacement will have it looking factory-fresh! The CYMA Alloy Lower Receiver for CM.098 AEG is made from alloy, packaged with a magazine release, bolt catch and ambidextrous fire selectors. 

Compatibility-wise, this lower is designed specifically for the CM.098 AEG series and is unlikely to work with other brands' SR-25 AEGs. Whether your lower is a bit scratched or it's taken a massive impact and cracked, the CYMA Alloy Lower Receiver for CM.098 AEG is the key to fixing it up!

If you are sick and tired of your goggles fogging at a critical moment, here is the solution! The ExFog XT Antifog System is a revolutionary anti-fog device designed to attach to helmets in its basic form, but can also be worn as a headband setup. The Exfog Cold Air Unit will provide constant cold air to your lenses to stop fogging of your goggles or helmet via food-grade PVC tubes and has an adjustable fan speed so you can adjust the anti-fog effect to suit the situation.

This is the newest generation of ExFog Cold Air Unit, known as the "XT". The new unit is more powerful than before with the same low noise performance, and now charges via USB-Type C. The XT version also includes the ExFog Universal Magnetic Goggle Adapters, so you can easily remove your goggles from the unit in seconds, with no need for tools.

Power is provided by an internal rechargeable battery, and the device mounts via a choice of velcro or the Tband or Headband kit. If you want goggle fogging to be a thing of the past, the Exfog is one of the few devices which guarantee this!

A second generation of 8Field's fully loaded chest rig which comes with Full Front and Back Molle Panels, allowing the user to carry gear, and be changed at a moments notice to fit the user's purpose.

A second generation of 8Field's fully loaded chest rig which comes with Full Front and Back Molle Panels, allowing the user to carry gear, and be changed at a moments notice to fit the user's purpose.

A second generation of 8Field's fully loaded chest rig which comes with Full Front and Back Molle Panels, allowing the user to carry gear, and be changed at a moments notice to fit the user's purpose.

A second generation of 8Field's fully loaded chest rig which comes with Full Front and Back Molle Panels, allowing the user to carry gear, and be changed at a moments notice to fit the user's purpose.

A second generation of 8Field's fully loaded chest rig which comes with Full Front and Back Molle Panels, allowing the user to carry gear, and be changed at a moments notice to fit the user's purpose.

A second generation of 8Field's fully loaded chest rig which comes with Full Front and Back Molle Panels, allowing the user to carry gear, and be changed at a moments notice to fit the user's purpose.

If you're in the market for a micro tracer unit but you want muzzle flash, the Eshooter FLARE M Tracer Unit with Muzzle Flash is your best bet. This ultra-compact tracer unit rivals the smallest on the market, measuring approximately 5.4cm long with a 2.8cm diameter and offers muzzle flash functionality in a wide variety of colour options along with standard tracer functionality.

Being so small and light, the FLARE M is ideal for mounting on GBB pistols and is also an asset to any CQB skirmisher who requires a tracer that doesn't compromise handling qualities or add too much extra length to their primary. As it comes, the FLARE M is intended to be mounted on 14mm CCW male threaded outer barrels and includes an 11mm CW adapter for use with WE and Armourer Works pistols. If you run a RAVEN or VORSK pistol, use a 12mm CW to 14mm CCW adapter to mount the Flare M. Novritsch or Army Armament pistol owners, no need to feel left out, use a 12mm CCW female thread adapter and you can rock the FLARE M too!

Powered by an internal rechargeable battery and charged via the included USB Type-C charger cable, the FLARE M charges quickly using the most recent cable type and comes with detailed instructions so you can master its wealth of functionality easily. Whether you run an SMG, Rifle, GBB Pistol or sniper rifle, the FLARE M is the perfect way to add tracer and muzzle flash functionality to your setup without adding weight or making your primary unwieldy!

If you have a sneaky playstyle a MK23 belongs in your arsenal! This phenomenally quiet Airsoft NBB pistol has been the sidearm of choice for Airsoft snipers since it was released, and it isn't hard to see why! 

The MK23 is super quiet thanks to its non-blowback action, and is exceptionally accurate and long ranged for a pistol in this price bracket. For those who simply must upgrade every Airsoft gun they own, the MK23 is compatible with VSR-10 style inner barrels and HOP-up buckings, meaning the accuracy potential for this pistol is practically limitless! 

If you are building out your M4/AR15 AEG for maximum performance the Gate EON HOP-up unit is probably already on your list! This precise HOP-up unit is constructed from CNC machined aluminium and is a rotary style unit which applies pressure directly to the top of the HOP-up rubber/nub to minimise side-to-side deviation.

This unit is compatible with M4/AR15 AEGs and can also be used with HPA setups thanks to the included nozzle sleeve which perfectly centres the nozzle for maximum efficiency.

If you are building out your M4/AR15 AEG for maximum performance the Gate EON HOP-up unit is probably already on your list! This precise HOP-up unit is constructed from CNC machined aluminium and is a rotary style unit which applies pressure directly to the top of the HOP-up rubber/nub to minimise side-to-side deviation.

This unit is compatible with M4/AR15 AEGs and can also be used with HPA setups thanks to the included nozzle sleeve which perfectly centres the nozzle for maximum efficiency.

If you are building out your M4/AR15 AEG for maximum performance the Gate EON HOP-up unit is probably already on your list! This precise HOP-up unit is constructed from CNC machined aluminium and is a rotary style unit which applies pressure directly to the top of the HOP-up rubber/nub to minimise side-to-side deviation.

This unit is compatible with M4/AR15 AEGs and can also be used with HPA setups thanks to the included nozzle sleeve which perfectly centres the nozzle for maximum efficiency.

Built by Theta Optics this Airsoft sight is designed to be used in conjunction with a holographic or red dot sight to magnify the picture and dot, and then be flipped to the side when not required. The sight is fully adjustable, with fine tuning adjustments for windage and elevation, as well as focus to get the clearest picture possible. The sight is designed to be fit to 20mm RIS / RAS rails, giving it great compatibility with a wide range of aftermarket holographic and red-dot sights.

This sight is perfect for those who are looking to get the perfect sight setup for both CQB and Outdoors games. For CQB flip the sight to the side, and for those longer range outdoor shots use the magnifier.