Airsoft Under £50

The Patrol Base Airsoft Gift Card has no set value so that you can pick larger values as you require them!

As the time approaches for birthdays, Christmas and special occasion gifts, it can be a bit nerve-wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique bunch; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it!

We've created our Airsoft Gift Card for this very situation. These can be purchased and redeemed against any product offered on our website or in our showroom. Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they're saving up for!

For Terms and Conditions please see our Terms and Conditions Page.

If you're after a budget hard rifle case for Airsoft, Air rifles or anything else, the HASTA Large Rifle Hard Case should be on your shopping list! A simplified version of the original HASTA Large Wheeled Rifle Case which doesn't compromise on quality, the Large Rifle Hard Case is made from the same strong high-density polymer as the full-fat version with a professional crackle textured finish to help hide scratches and keep the case looking fresh.

Measuring approximately 120cm end to end, the Large Rifle Hard Case is suitable for rifles, shotguns and SMGs up to 116cm long and if you like short platforms, you might even be able to fit two inside. Like the other cases from HASTA's range, this case features unique elongated feet that allow several HASTA cases of various sizes to be securely stacked together, keeping your collection neat and tidy when stored or transported in the boot of a vehicle.

With high density Wave/Eggbox foam inside to keep your pride and joy comfortable on its travels or while stashed, and plenty of innovative features not present on other cases, the HASTA Large Rifle Hard Case is the best budget case we've seen yet!

If you want to look like a real baller at your next skirmish but your budget is limited, fear not! The Delta Armory Jump Plate Carrier MOLLE Tactical Vest is a super affordable JPC replica, allowing you to get the look of the SAS, Navy SEALs or Delta Force for less than the price of a takeaway. Constructed from Nylon with bungee cord mag pouch retainers and cummerbund adjustment, the Jump Plate Carrier is a low-profile plate carrier designed with parachute jumping in mind.

While it may be low-profile, the JPC has plenty of MOLLE attachment loops and all sides, allowing you to kit it out with MOLLE pouches if you need more load-bearing capacity or run it slick with the 3 built-in M4/AR-15 magazine pouches and move fast with the added protection of the pre-installed foam mock SAPI plates. The vest is fully adjustable, with velcro adjustments on each shoulder to customise the ride height and bungee cord at the rear to allow for practically any body type.

Available in a wide range of colour options suitable for any style, this JPC is what you need if you like your Airsoft kit cheap and cheerful!

If you want to look like a real baller at your next skirmish but your budget is limited, fear not! The Delta Armory Jump Plate Carrier MOLLE Tactical Vest is a super affordable JPC replica, allowing you to get the look of the SAS, Navy SEALs or Delta Force for less than the price of a takeaway. Constructed from Nylon with bungee cord mag pouch retainers and cummerbund adjustment, the Jump Plate Carrier is a low-profile plate carrier designed with parachute jumping in mind.

While it may be low-profile, the JPC has plenty of MOLLE attachment loops and all sides, allowing you to kit it out with MOLLE pouches if you need more load-bearing capacity or run it slick with the 3 built-in M4/AR-15 magazine pouches and move fast with the added protection of the pre-installed foam mock SAPI plates. The vest is fully adjustable, with velcro adjustments on each shoulder to customise the ride height and bungee cord at the rear to allow for practically any body type.

Available in a wide range of colour options suitable for any style, this JPC is what you need if you like your Airsoft kit cheap and cheerful!

If you want to look like a real baller at your next skirmish but your budget is limited, fear not! The Delta Armory Jump Plate Carrier MOLLE Tactical Vest is a super affordable JPC replica, allowing you to get the look of the SAS, Navy SEALs or Delta Force for less than the price of a takeaway. Constructed from Nylon with bungee cord mag pouch retainers and cummerbund adjustment, the Jump Plate Carrier is a low-profile plate carrier designed with parachute jumping in mind.

While it may be low-profile, the JPC has plenty of MOLLE attachment loops and all sides, allowing you to kit it out with MOLLE pouches if you need more load-bearing capacity or run it slick with the 3 built-in M4/AR-15 magazine pouches and move fast with the added protection of the pre-installed foam mock SAPI plates. The vest is fully adjustable, with velcro adjustments on each shoulder to customise the ride height and bungee cord at the rear to allow for practically any body type.

Available in a wide range of colour options suitable for any style, this JPC is what you need if you like your Airsoft kit cheap and cheerful!

If you want to look like a real baller at your next skirmish but your budget is limited, fear not! The Delta Armory Jump Plate Carrier MOLLE Tactical Vest is a super affordable JPC replica, allowing you to get the look of the SAS, Navy SEALs or Delta Force for less than the price of a takeaway. Constructed from Nylon with bungee cord mag pouch retainers and cummerbund adjustment, the Jump Plate Carrier is a low-profile plate carrier designed with parachute jumping in mind.

While it may be low-profile, the JPC has plenty of MOLLE attachment loops and all sides, allowing you to kit it out with MOLLE pouches if you need more load-bearing capacity or run it slick with the 3 built-in M4/AR-15 magazine pouches and move fast with the added protection of the pre-installed foam mock SAPI plates. The vest is fully adjustable, with velcro adjustments on each shoulder to customise the ride height and bungee cord at the rear to allow for practically any body type.

Available in a wide range of colour options suitable for any style, this JPC is what you need if you like your Airsoft kit cheap and cheerful!

If you're in search of the perfect middle ground between protection and dexterity, Mechanix M-Pact® 0.5mm Gloves are what you need. Boasting a seriously slick, aggressive look with Thermoplastic Rubber (TPR) knuckle and finger guards, M-Pact® 0.5mm Gloves also make use of Mechanix 0.5mm AX-Suede™ palms for a precision feel, touchscreen compatibility and a more intimate relationship with the controls of your Airsoft gun, motorbike or power tool.

M-Pact® 0.5mm Gloves are absolutely bristling with thoughtful features, ideal for tactical applications, workwear, motocross and cycling. On each thumb, we have a polyester sweat wipe designed to allow you to wipe your brow without removing your glove. The trigger finger includes pre-stitched seams, designed to allow you to cut the finger off for improved trigger control and avoid material fraying. M-Pact® gloves are also machine washable and rated EN 13594 for impact protection, making them great for motorcycling and other activities which require extra protection for the knuckles and fingers.

If you need hard-wearing, robust gloves with an aggressive yet discrete aesthetic, Mechanix M-Pact® 0.5mm Gloves are exactly that. Flawlessly made with advanced, proprietary materials and designed with plenty of well-thought-out features, there is a reason Mechanix M-Pact Gloves are so well regarded amongst real operators, civilian shooters, motorcyclists, technicians and Airsofters alike!

If you're looking for a hard case to suit an SMG or carbine-length rifle, the HASTA Medium Rifle/SMG Hard Case has your name on it! A smaller, simplified version of the original HASTA Large Wheeled Rifle Case, which doesn't compromise on quality, the Medium Rifle/SMG Hard Case is made from the same strong high-density polymer as the full-fat version, with a professional crackle textured finish to help hide scratches and keep the case looking fresh.

Measuring approximately 86cm long externally, this case is ideally suited to platforms up to 82cm long, being wide enough that you shouldn't need to remove your optical sight. Like the other cases from HASTA's range, this case features unique elongated feet that allow several HASTA cases of various sizes to be securely stacked together, keeping your collection neat and tidy when stored or transported in the boot of a vehicle. If you're after an affordable hard case packed with innovative quality-of-life features for a short-barrelled rifle, SMG or shotgun, the HASTA Medium Rifle/SMG Hard Case is perfect!

If you're looking for cheap magazines to keep your Airsoft rifle well-fed on the battlefield, you should get these! The Specna Arms 140rnd Mid-Cap Magazine for M4/AR-15 AEGs is loaded through the feed port using an Airsoft speedloader. It has a polymer shell, keeping it lightweight but still hardwearing.

The exterior design of this magazine matches the widely issued NATO STANAG magazine type and will fit in with any M4/AR15 loadout from practically any time period or military organisation. This magazine is compatible with the vast majority of M4/AR15 AEG rifles and brands!

If you're searching for a low-profile plate carrier with plenty of capacity, the 8Fields Tactical Recon Laser-Cut Buckle Up MOLLE Plate Carrier is ideal. Made from 1000D Nylon with polymer buckles and elastic magazine retainers, the Recon Plate Carrier holds up to 6 AR/AK magazines inside the cummerbund and includes a 3-AR/AK mag buckle-up placard, meaning you can carry a grand total of 9 magazines using only the included pouches!

The Recon Plate Carrier features laser-cut MOLLE loops throughout the design, allowing for the addition of extra MOLLE pouches wherever needed. The benefit of laser-cut MOLLE is its significantly reduced weight compared to standard MOLLE, allowing you to remain light and agile in battle. If you like to move fast without compromising carrying capacity, the 8Fields Tactical Recon Laser-Cut Buckle Up MOLLE Plate Carrier will keep you happy!

If you're searching for a low-profile plate carrier with plenty of capacity, the 8Fields Tactical Recon Laser-Cut Buckle Up MOLLE Plate Carrier is ideal. Made from 1000D Nylon with polymer buckles and elastic magazine retainers, the Recon Plate Carrier holds up to 6 AR/AK magazines inside the cummerbund and includes a 3-AR/AK mag buckle-up placard, meaning you can carry a grand total of 9 magazines using only the included pouches!

The Recon Plate Carrier features laser-cut MOLLE loops throughout the design, allowing for the addition of extra MOLLE pouches wherever needed. The benefit of laser-cut MOLLE is its significantly reduced weight compared to standard MOLLE, allowing you to remain light and agile in battle. If you like to move fast without compromising carrying capacity, the 8Fields Tactical Recon Laser-Cut Buckle Up MOLLE Plate Carrier will keep you happy!

If you're searching for a low-profile plate carrier with plenty of capacity, the 8Fields Tactical Recon Laser-Cut Buckle Up MOLLE Plate Carrier is ideal. Made from 1000D Nylon with polymer buckles and elastic magazine retainers, the Recon Plate Carrier holds up to 6 AR/AK magazines inside the cummerbund and includes a 3-AR/AK mag buckle-up placard, meaning you can carry a grand total of 9 magazines using only the included pouches!

The Recon Plate Carrier features laser-cut MOLLE loops throughout the design, allowing for the addition of extra MOLLE pouches wherever needed. The benefit of laser-cut MOLLE is its significantly reduced weight compared to standard MOLLE, allowing you to remain light and agile in battle. If you like to move fast without compromising carrying capacity, the 8Fields Tactical Recon Laser-Cut Buckle Up MOLLE Plate Carrier will keep you happy!

If you're searching for a low-profile plate carrier with plenty of capacity, the 8Fields Tactical Recon Laser-Cut Buckle Up MOLLE Plate Carrier is ideal. Made from 1000D Nylon with polymer buckles and elastic magazine retainers, the Recon Plate Carrier holds up to 6 AR/AK magazines inside the cummerbund and includes a 3-AR/AK mag buckle-up placard, meaning you can carry a grand total of 9 magazines using only the included pouches!

The Recon Plate Carrier features laser-cut MOLLE loops throughout the design, allowing for the addition of extra MOLLE pouches wherever needed. The benefit of laser-cut MOLLE is its significantly reduced weight compared to standard MOLLE, allowing you to remain light and agile in battle. If you like to move fast without compromising carrying capacity, the 8Fields Tactical Recon Laser-Cut Buckle Up MOLLE Plate Carrier will keep you happy!

If you're searching for a low-profile plate carrier with plenty of capacity, the 8Fields Tactical Recon Laser-Cut Buckle Up MOLLE Plate Carrier is ideal. Made from 1000D Nylon with polymer buckles and elastic magazine retainers, the Recon Plate Carrier holds up to 6 AR/AK magazines inside the cummerbund and includes a 3-AR/AK mag buckle-up placard, meaning you can carry a grand total of 9 magazines using only the included pouches!

The Recon Plate Carrier features laser-cut MOLLE loops throughout the design, allowing for the addition of extra MOLLE pouches wherever needed. The benefit of laser-cut MOLLE is its significantly reduced weight compared to standard MOLLE, allowing you to remain light and agile in battle. If you like to move fast without compromising carrying capacity, the 8Fields Tactical Recon Laser-Cut Buckle Up MOLLE Plate Carrier will keep you happy!

If you're searching for a low-profile plate carrier with plenty of capacity, the 8Fields Tactical Recon Laser-Cut Buckle Up MOLLE Plate Carrier is ideal. Made from 1000D Nylon with polymer buckles and elastic magazine retainers, the Recon Plate Carrier holds up to 6 AR/AK magazines inside the cummerbund and includes a 3-AR/AK mag buckle-up placard, meaning you can carry a grand total of 9 magazines using only the included pouches!

The Recon Plate Carrier features laser-cut MOLLE loops throughout the design, allowing for the addition of extra MOLLE pouches wherever needed. The benefit of laser-cut MOLLE is its significantly reduced weight compared to standard MOLLE, allowing you to remain light and agile in battle. If you like to move fast without compromising carrying capacity, the 8Fields Tactical Recon Laser-Cut Buckle Up MOLLE Plate Carrier will keep you happy!

If you want an affordable red dot sight with the instantly recognisable open reflex style popularised by Call of Duty, the Evike Warfare Multi-Reticle Open Reflex Red Dot Sight is an excellent option. Built from aluminium, it comes equipped with an integrated 20mm Picatinny rail mount and runs on a single CR2032 button cell.

When switched on, the sight offers four selectable reticle patterns, available in both red and green illumination, with five brightness settings to adapt to varying light conditions. Reticle selection is handled via the rear control dial and includes an arrow dot, predator style, smiley face, and skull design, allowing you to tailor the sight to your preference or playstyle.

Featuring full zero adjustment, adjustable brightness and colour, multiple reticle choices, and a built-in mount, the Evike Warfare Multi-Reticle Open Reflex Red Dot Sight delivers impressive functionality at a highly competitive price.

If you’re looking for a clean, stylish suppressor to complete a premium airsoft rifle build, the EMG Guardian Airsoft Suppressor is a perfect choice. Precision-machined from CNC aluminium, it offers a flawless finish and features standard 14mm CCW threading, making it compatible with most airsoft assault rifle platforms.

Inspired by real-steel SureFire SOCOM suppressors, it features engraved EMG training trademarks and an arched grip section at the base for easy, secure fitting. The suppressor is also tracer-ready, with a removable base that reveals an internal spring designed to hold tracer units such as the AceTech Lighter S.

Available in three different lengths, the EMG Guardian suits any setup, from compact CQB builds to longer DMR platforms.

If you’re looking for a clean, stylish suppressor to complete a premium airsoft rifle build, the EMG Guardian Airsoft Suppressor is a perfect choice. Precision-machined from CNC aluminium, it offers a flawless finish and features standard 14mm CCW threading, making it compatible with most airsoft assault rifle platforms.

Inspired by real-steel SureFire SOCOM suppressors, it features engraved EMG training trademarks and an arched grip section at the base for easy, secure fitting. The suppressor is also tracer-ready, with a removable base that reveals an internal spring designed to hold tracer units such as the AceTech Lighter S.

Available in three different lengths, the EMG Guardian suits any setup, from compact CQB builds to longer DMR platforms.

If you’re looking for a clean, stylish suppressor to complete a premium airsoft rifle build, the EMG Guardian Airsoft Suppressor is a perfect choice. Precision-machined from CNC aluminium, it offers a flawless finish and features standard 14mm CCW threading, making it compatible with most airsoft assault rifle platforms.

Inspired by real-steel SureFire SOCOM suppressors, it features engraved EMG training trademarks and an arched grip section at the base for easy, secure fitting. The suppressor is also tracer-ready, with a removable base that reveals an internal spring designed to hold tracer units such as the AceTech Lighter S.

Available in three different lengths, the EMG Guardian suits any setup, from compact CQB builds to longer DMR platforms.

If you’re looking for a clean, stylish suppressor to complete a premium airsoft rifle build, the EMG Guardian Airsoft Suppressor is a perfect choice. Precision-machined from CNC aluminium, it offers a flawless finish and features standard 14mm CCW threading, making it compatible with most airsoft assault rifle platforms.

Inspired by real-steel SureFire SOCOM suppressors, it features engraved EMG training trademarks and an arched grip section at the base for easy, secure fitting. The suppressor is also tracer-ready, with a removable base that reveals an internal spring designed to hold tracer units such as the AceTech Lighter S.

Available in three different lengths, the EMG Guardian suits any setup, from compact CQB builds to longer DMR platforms.

If you're looking for a modern stock design with plenty of room for a massive battery, the PTS Syndicate EPS-2 M4/AR-15 Stock has your name on it! Made from ultra-strong DuPont Zytel high-density polymer with steel QD sling sockets on each side and a grippy rubber butt plate, the EPS-2 builds on the original EPS design with a more modern aesthetic and reduced overall length, keeping the rock-solid build quality which put PTS on the map.  

The adjustment lever is a low-profile split design with a fixed central ridge, reducing the chances of accidental activation to practically nil. The shape of the stock itself is designed to reduce snag potential, with smooth edges and practically nowhere for your sling to catch and slow you down. To access the internal battery compartment, press the two tabs at the toe of the stock in, then lift the butt plate free. 

Compatibility-wise, the EPS-2 should fit most Airsoft M4/AR-15 buffer tubes, both AEG and GBBR versions. If you're styling up your AR and want more battery space as a bonus, the PTS EPS-2 M4/AR-15 Stock belongs on your build!

If you're looking for a modern stock design with plenty of room for a massive battery, the PTS Syndicate EPS-2 M4/AR-15 Stock has your name on it! Made from ultra-strong DuPont Zytel high-density polymer with steel QD sling sockets on each side and a grippy rubber butt plate, the EPS-2 builds on the original EPS design with a more modern aesthetic and reduced overall length, keeping the rock-solid build quality which put PTS on the map.  

The adjustment lever is a low-profile split design with a fixed central ridge, reducing the chances of accidental activation to practically nil. The shape of the stock itself is designed to reduce snag potential, with smooth edges and practically nowhere for your sling to catch and slow you down. To access the internal battery compartment, press the two tabs at the toe of the stock in, then lift the butt plate free. 

Compatibility-wise, the EPS-2 should fit most Airsoft M4/AR-15 buffer tubes, both AEG and GBBR versions. If you're styling up your AR and want more battery space as a bonus, the PTS EPS-2 M4/AR-15 Stock belongs on your build!

A pair of ballistic safety goggles with a co-injected, ventilated frame that guarantees comfort and clear vision, making them ideal for Airsoft. With a large headstrap and wide field of view, these are perfect for getting into the thick of it, safe in the knowledge that your eyes are well protected. This, the "FIREFIGHTER" version, is fitted with a red subframe and red elastic strap, ideal for those who want eye-catching eye protection!

If you’re looking for a budget-friendly red dot sight with the iconic open reflex style made famous by Call of Duty, the Evike Spec Ops Multi-Reticle Open Reflex Red Dot Sight delivers impressive performance for the price. Constructed from aluminium, it features an integrated 20mm Picatinny rail mount and is powered by a CR2032 button cell.

Once powered on, you can choose between four reticle styles in either red or green illumination, each with five brightness levels to suit different lighting conditions. Reticles are selected via the rear dial and include a simple dot, burst, tri-dot, or Biohazard, giving you plenty of flexibility for any playstyle or environment.

With full zero adjustment, multiple reticle options, adjustable colour and brightness, and a built-in mount, the Evike Spec Ops Multi-Reticle Open Reflex Red Dot Sight offers outstanding versatility at an equally impressive price point.

Whether you're working on a home range setup or want to sharpen your skills off the field, the Patrol Base 6-Plate Resetting Rack Target Array should be in your sights! This steel target array features 6 knock-down targets arranged on a rack, fitted with a reset bar which can be used to remotely reset the array using the included cord.

This array is designed specifically for Airsoft muzzle energy, meaning you'll have no problem knocking these targets down within a respectable range, provided your marksmanship is on point!

If you're looking for more exciting and challenging targets for your home range, the Patrol Base Double Texas Star Target will do the trick! Designed to mimic real steel Texas Star shooting targets with a more Airsoft-friendly build, each target on the 10-target array should drop when hit, though the first hit will definitely be the easiest!

The targets themselves, the two spinning arrays and the frame are made from steel. The base includes mounting holes for permanent positioning, though the array stands well on its base without the need to be screwed down. The name of the game is clearing both arrays by knocking the targets off as quickly as possible. After the first target is hit, the array will start spinning, and the frame will pivot back and forth, giving you a challenging test of your reaction speed and a fantastic way to train to engage moving targets!

If you're looking for a way to improve your skirmish skills or keep yourself sharp between games, the Patrol Base Double Texas Star Target is a great piece of kit. Add this to your home range to challenge yourself against the clock or against your mates!

If you’re after high-quality mid-caps with a more realistic aesthetic than EPM mags, the EMG 210rnd Troy BattleMag Magazines for M4/AR-15 AEGs (3 Pack) are an ideal choice! Like EPMs, they offer a massive 210-round capacity, far more than most standard-length mid-caps, but unlike EPMs, these are based on the real Troy BattleMag design and are officially licensed by Troy through EMG. Perfect for realism enthusiasts!

True to the real BattleMag, the sides of the mag feature a snake-scale textured pattern for improved grip, paired with a rubber magazine pull tab on the base to help with quick, confident reloads. The pull tab also makes it easier to extract the mags from tight pouches, giving you more to hold onto when speed matters.

Loading the BattleMag works just like any other Airsoft mid-cap: simply fill through the top feed port using a speedloader or loading tool. Thanks to the generous capacity, brand-new mags can be a bit stiff when using ODIN-style crank loaders, so we recommend breaking them in first, filling them with a thumb-plunger loader and cycling them a few times. If you want your magazines to match the realism of your primary, the EMG Troy BattleMag 3-Pack is exactly what you’re looking for!

If you’re after high-quality mid-caps with a more realistic aesthetic than EPM mags, the EMG 210rnd Troy BattleMag Magazines for M4/AR-15 AEGs (3 Pack) are an ideal choice! Like EPMs, they offer a massive 210-round capacity, far more than most standard-length mid-caps, but unlike EPMs, these are based on the real Troy BattleMag design and are officially licensed by Troy through EMG. Perfect for realism enthusiasts!

True to the real BattleMag, the sides of the mag feature a snake-scale textured pattern for improved grip, paired with a rubber magazine pull tab on the base to help with quick, confident reloads. The pull tab also makes it easier to extract the mags from tight pouches, giving you more to hold onto when speed matters.

Loading the BattleMag works just like any other Airsoft mid-cap: simply fill through the top feed port using a speedloader or loading tool. Thanks to the generous capacity, brand-new mags can be a bit stiff when using ODIN-style crank loaders, so we recommend breaking them in first, filling them with a thumb-plunger loader and cycling them a few times. If you want your magazines to match the realism of your primary, the EMG Troy BattleMag 3-Pack is exactly what you’re looking for!

If you're hitting the field with an M4 AEG and need affordable gear to complement it, this bundle is ideal! The M4 AEG Shooter Starter Rig includes an 8Fields Tactical MOLLE Plate Carrier Vest w/ Mock Insert and a MOLLE Open Top Double Magazine Pouch For M4/AR-15 in your choice of colour with 2 x 150rnd Mid-cap magazines for M4/AR-15 AEGs from Battleaxe. Please note, you will need a Speed Loader to load these mid-cap magazines, so if you don't have one, make sure you pick one up!

If you want to personalise your new rig, see our range of Morale and ID patches to add a touch of humour and personality. If you need assistance mounting your MOLLE pouch to your plate carrier, check out our MOLLE Guide.

If you’re looking to sharpen your skills at home between skirmishes, the Patrol Base Rotating Texas Star Shooting Target is a must-have for your personal range. Designed as an Airsoft-friendly take on the classic Texas Star used in the real steel world, this version uses magnetic mounts for its five plates, reducing wear, tear, and the risk of damage.

Both the plates and the rotating armature are constructed from steel and come with mounting holes for a permanent setup, though it stands securely on its own without needing to be screwed down. The challenge is simple: clear all five targets as fast as you can. Once you hit the first plate, the whole thing kicks into motion, and suddenly landing shots becomes a whole lot trickier!

If you can’t make it to a game as often as you’d like but still want to keep your reactions sharp, the Patrol Base Rotating Texas Star Shooting Target will have you shooting like Jerry Miculek in no time. (If you don’t know who he is, do yourself a favour and look him up!)