- Full metal construction
- Side folding stock
- ETU and MOSFET pre-installed
As one of Lancer Tactical's new line of AK AEGs, the LT-52 takes Lancer's philosophy of providing the best out of the box performance possible and wraps it up in a stamped steel receiver with authentic AK-105 style black polymer furniture. The LT-52 features a pre-installed electronic trigger unit, MOSFET, an adjustable metal HOP-up unit, and a high torque motor which works together with the Lancer gearbox internals to provide performance to rival Lancer's Pro Line M4s, but in modern the AK-105 format.
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship all around world, with delivery not only to the UK, but to most of the EU and select Worldwide locations as well. We provide a working day by road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change, and are only a rough guide. For more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£4.95
Approx.
UK Next Day
£6.95
Approx.
Highlands / Islands
£12.99*
Approx.
EU
£12.99+*
Approx.
* Please note that Scottish Highlands, Islands and EU post prices can vary wildly. Prices range from £8.99, up to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
We all know Lancer Tactical for their extensive line of well equipped, affordable M4/AR15 variants, as well as their Proline series of advanced M4/AR15 AEGs. The LT-52 is for all the Stalkers out there, the Metro dwellers, and the Spetsnaz milsimmers who are looking for an AK with Lancer's impressive ETU trigger system and MOSFET. This ETU MOSFET combination gives the LT-52 an extremely snappy trigger response with its pre-cocking function, as well as battery and circuitry protection to keep the LT-52 running effectively in the long term. For the AK people that have felt left out of the MOSFET game, here is your opportunity to catch up with the M4 fans!
Starting at the tip of the barrel we can find an AK-105 style gas booster muzzle brake, which is intended in the real AK-105 to direct additional gas back into the operating mechanism to ensure the AK-105 keeps the AK typical reliability with its shortened barrel. The muzzle brake mounts to 14mm CCW male threads at the tip of the 12.5-inch outer barrel and can be swapped out for a suppressor or tracer unit if you are going for more of a Spetsnaz look for your AK. The front sight of the LT-52 is cast as part of the gas block, providing an adjustable front post with protective wings to ensure an accidental bump or scrape does not render your sights useless. This connects to the gas tube, which is the correct design for an AK-105. The gas tube meets the polymer upper handguard via a steel handguard cap. The handguards of the LT-52 are styled after the standard AK-74 polymer type, with linear grooves for additional grip. These handguards match perfectly with the post-Bakelite era AK furniture, such as the side-folding solid stock and shortened AK-105 length outer barrel.
The lower handguard surrounds the outer barrel and is retained by its own steel handguard cap which includes a sling point on the left side, ideally for hook-type slings. The trunnion block also provides the mounting point for the classic AK tangent rear iron sight, which provides multiple graduations for adjustment and a fine rear sight notch to align with the front sight post. The sight can be adjusted by pressing the buttons on either side of the sight notch and moving the notch back and forth on its base. The lever on the right side is the handguard disassembly lever. This lever does not appear to provide a function on the LT-52 but can be moved back and forth. As part of the classic AK aesthetic, we can find a dummy cleaning rod running parallel to the outer barrel, stored on the weapon to give the Russian soldier less to remember! This isn't intended for cleaning an Airsoft barrel and is just for the look.
Next up we find the receiver, which is constructed from stamped steel, just like the real AK-105. The receiver has standard AK style controls on the right side, with a fire selector lever which doubles as a dust cover when in safe mode, and a charging handle attached to an authentic black dummy bolt carrier. In typical AK style, the first position on the fire selector is fully auto and the lowermost position is semi-automatic. Each fire mode is denoted by a crispy engraved authentic Russian Cyrillic marking, adding some realism to this already very realistic AK. Over on the left side, we can find an AK quick detach mounting rail, allowing for authentic Russian scopes to be mounted, or Picatinny rail mounts if you prefer a more modern western optic. The receiver also provides several authentic dummy rivets, all found in the correct place for this AK variant. On the right side, below the charging handle, we can find the laser engraved "LANCER TACTICAL 6MM" and beneath is your unique serial number.
To access the adjustable HOP-up unit of the LT-52, simply hold the charging handle to the rear to reveal the slider adjustable HOP unit. The slider unit is known as one of the best designs out there, and that is the reason this unit has not changed in design since the original Tokyo Marui AK-47 AEG. To increase the HOP effect, simply move the slider rearwards. Returning the slider to the front will reduce the HOP to its lowest setting.
The receiver top cover of the LT-52 is also constructed from stamped steel and is the appropriate design for a modern AK, with ribs stamped into the upper surface to provide additional strength whilst keeping the material thin and lightweight. The battery compartment for the LT-52 is beneath the top cover. To access the battery compartment, simply press the button at the rear of the top cover and it should come straight off, revealing the mini-Tamiya connector. The LT-52 is LiPo ready out of the box, and we recommend a 7.4V 1450mAh stick battery but you can also use a 9.6V NiMH stick battery if you prefer a NiMH battery. With the battery connected and installed, you can place the top cover back into the LT-52, align the button with the hole in the rear of the top cover, and pull the charging handle to lock the cover down if necessary.
The pistol grip of the LT-52 is a standard AKM/AK-74 type pistol grip, with diamond checkering on either side to ensure the LT-52 stays firmly in your grasp in any weather condition. The trigger guard and magazine release can be found just ahead of the pistol grip, and are constructed from steel to provide solid magazine locking and ample rigidity. The magazine release is placed in the centre of the receiver and is accessible from either side of the AEG. The magazine retention system of the AK platform is a "rock and lock" motion, requiring you to first index the front "hook" on the magazine inside the receiver, then rock the magazine to engage the catch.
The stock of the LT-52 is constructed from polymer, and is a realistically slim design to facilitate side folding functionality. The stock features a storage compartment within its steel butt plate, which can be opened using the large polymer button on the butt plate. This compartment is rather small and is intended for a cleaning kit, but could also be used to store batteries for any accessories on your AK, or any documentation you might need. To fold the stock to the side, simply press the button on the left side of the rear of the receiver, fold the stock to the left side and lock it on its hook. To unfold the stock, press the button on the butt plate to disengage the hook, and the stock can be folded into the deployed position and locked. The right side of the stock also features a steel sling loop which pairs well with the front sling point on the lower handguard cap, providing appropriate mounting apparatus for a two-point sling, but ideally suited to an AK47/74 sling.
Internally, the LT-52 is very impressive. Some Ruskie fanbois have been waiting quite some time for a steel-bodied AK that also packs all of the modern enhancements found in M4/AR15 AEGs, and now their prayers have been answered! The LT-52 boasts ultra-robust gearbox internals, including a steel toothed piston, 8mm bearings, an anodized cylinder for reduced internal friction, and a quick change bearing spring guide, allowing you to change the spring of your AEG without having to take the gearbox apart. To drive the gearbox, Lancer saw fit to provide a high torque motor capable of 19K RPM, and packing enough torque to handle stronger springs. To keep these internals in check, and provide an incredibly fast trigger response, the Lancer Tactical ETU and MOSFET have been installed, providing battery protection and providing pre-cocking to the LT-52. Pre-cocking means the piston starts its travel at the rear of the gearbox, in a pre-cocked position, instead of first needing to be cocked. This results in an exceptional trigger response; when the trigger is pulled, the piston drops without delay and without first needing to be pulled back. Phenomenal in a platform of this price range, especially an AK!
So, time for the AK fanbois to play catch up! The LT-52 easily rivals any out of the box ETU equipped M4/AR15 platform in its rate of fire and trigger response, and with the reinforced gearbox internals present in this rifle we are sure it will perform for many years to come! Time for the AK to become the fearsome platform in Airsoft that it is in the real world!
Features
- Full metal construction
- 7.4V LiPo ready
- Alloy Slider-adjustable HOP unit
- ETU and MOSFET pre-installed
- Unique serial number
- Sling points front and rear
- Adjustable tangent open iron sights
- Ambidextrous magazine release
- AK scope mount rail on the left side
- Textured AKM/AK-74 style pistol grip
- 12.5-inch AK-105 length carbine barrel
- "So simple even a child could use it, and they do!"
- Side folding AK-74M style stock with storage
- Steel receiver, top cover, rear sight and sling points
- Compatible with any AK platform AEG magazine
Package Includes
- Lancer Tactical LT-52 AK-105 Folding Stock Pro Line G2 w/ETU and MOSFET
- 120 rnd High-capacity magazine
- Lancer Tactical PVC patch
- Barrel cleaning/unjamming rod
Specification
General
 |
Assault Rifle
|
|---|---|
 |
Yes
|
 |
Yes,
No,
|
 |
Approx. 320fps ± 10%, using 0.20g BB
|
 |
Yes
|
 |
Yes
|
 |
|
 |
Starter, Regular Player,
|
Weight and Dimension
 |
Approx. 2.926kg
|
|---|---|
 |
60cm
|
 |
84cm
|
Construction
 |
Black
|
|---|---|
 |
Steel receiver, top cover, gas tube, rear sight, dummy cleaning rod, trigger guard and magazine release. Alloy outer barrel, front sight, trunnion block, flash hider, and gas block.
|
|
|
Polymer
Alloy
Aluminium
Steel
|
 |
Polymer
Alloy
Aluminium
Steel
|
Weapon Specific
 |
Electric
|
|---|---|
 |
None
|
 |
AK Platform, Long Gun, Assault Rifle, AK-105,
|
 |
AK Platform, Long Gun Magazine, Assault Rifle,
|
 |
   |
 |
Trigger Lock
|
 |
Right Handed
|
 |
Standard
|
 |
1:1
|
 |
0.25g
|
Hop-Up
 |
Yes
|
|---|---|
 |
Slider
|
 |
Behind the mock bolt carrier, accessible when the charging handle is held to the rear.
|
Furniture
 |
|
|---|---|
 |
AK Dovetail Rail
|
 |
Folding
|
|
|
2 Position
|
 |
Iron Sights , Tangent Open Iron Sight, Open Iron Sight,
|
 |
Stock , Handguard ,
|
Barrel
|
Outer Barrel Length (in)
|
12.5''
|
|---|---|
 |
Male
|
 |
CCW (Counter Clockwise)
|
 |
14mm
|
 |
6.03mm
|
 |
320mm
|
Magazine Specific
 |
Medium Capacity , AEG,
|
|---|---|
 |
Approx. 120 Rounds
|
 |
Speed Loader
|
 |
Top
|
Electric Gun Specific Information
Gearbox
|
|
V3 Gearbox
|
|---|---|
 |
Top Wired
|
 |
Yes
|
 |
Yes
|
 |
No
|
Motor
 |
High Torque
|
|---|
Battery Specific
 |
 |
|---|
Product Testing Data
 |
320 FPS +/- 10%
|
|---|---|
|
|
0.2g ASG BLASTER
|
|
|
28/02/2022
|
Size guide
Joule Charts
Special Instructions
These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.
FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.
Tap the tabs below to open the relevant chart for your replica.
This table should be used for reference, and cannot be used to check one weight against another, as the weight of the BB affects the power.
In order to check if the BB can be used with your replica chronograph using the weight you wish to use and then compare it against the table.
Every time you change weights you will need to re-chrono and check against the table. This is not a conversion chart between weights.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 325 | 0.98 | 1.23 | 1.37 | 1.47 | 1.57 | 1.77 | 1.96 | 2.11 | 2.21 | 2.45 |
| 328 | 1.00 | 1.25 | 1.40 | 1.50 | 1.60 | 1.80 | 2.00 | 2.15 | 2.25 | 2.50 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 335 | 1.04 | 1.30 | 1.46 | 1.56 | 1.67 | 1.88 | 2.09 | 2.24 | 2.35 | 2.61 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 345 | 1.11 | 1.38 | 1.55 | 1.66 | 1.77 | 1.99 | 2.21 | 2.38 | 2.49 | 2.76 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 355 | 1.17 | 1.46 | 1.64 | 1.76 | 1.87 | 2.11 | 2.34 | 2.52 | 2.63 | 2.93 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
| 370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
| 380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
| 390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
| 400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
| 410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
| 370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
| 380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
| 390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
| 400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
| 410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
| 420 | 1.64 | 2.05 | 2.29 | 2.46 | 2.62 | 2.95 | 3.28 | 3.52 | 3.69 | 4.10 |
| 430 | 1.72 | 2.15 | 2.40 | 2.58 | 2.75 | 3.09 | 3.44 | 3.69 | 3.86 | 4.29 |
| 440 | 1.80 | 2.25 | 2.52 | 2.70 | 2.88 | 3.24 | 3.60 | 3.87 | 4.05 | 4.50 |
| 450 | 1.88 | 2.35 | 2.63 | 2.82 | 3.01 | 3.39 | 3.76 | 4.04 | 4.23 | 4.70 |
| 460 | 1.97 | 2.46 | 2.75 | 2.95 | 3.15 | 3.54 | 3.93 | 4.23 | 4.42 | 4.91 |
| 470 | 2.05 | 2.57 | 2.87 | 3.08 | 3.28 | 3.69 | 4.10 | 4.41 | 4.62 | 5.13 |
| 480 | 2.14 | 2.68 | 3.00 | 3.21 | 3.42 | 3.85 | 4.28 | 4.60 | 4.82 | 5.35 |
| 490 | 2.23 | 2.79 | 3.12 | 3.35 | 3.57 | 4.02 | 4.46 | 4.80 | 5.02 | 5.58 |
| 500 | 2.32 | 2.90 | 3.25 | 3.48 | 3.72 | 4.18 | 4.65 | 4.99 | 5.23 | 5.81 |
| 510 | 2.42 | 3.02 | 3.38 | 3.62 | 3.87 | 4.35 | 4.83 | 5.20 | 5.44 | 6.04 |
Need ideas for something extra?
- Bottles or Bags
- 0.25g Standard BBs
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are standard 0.25g BBs which are designed to work in any Airsoft gun, performing best in Airsoft guns which fire between 280fps - 370fps, and are the go-to weight for any Airsoft skirmisher looking for an the perfect all around weight for a standard AEG. Whether you're new to Airsoft, or a regular skirmisher, this weight of BB will most likely be your go-to BB weight, and is the most commonly used by Airsoft players.
- 22,000 Shot Life
- 35 BBs Per Second
- GemTech Licensed
An AceTech Tracer Unit, which is concealed inside a fully licensed and CNC Machined Aluminium constructed replica of a GM-9 Suppressor from GemTech, a manufacturer of Suppressor for Real World Firearms. The internal LiPo battery can last for up to 22,000 shots, and can keep up with up to 35 BBs per second for maximum performance.
- 0.25g BIO BBs
- Bottles or Bags
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are BIO 0.25g BBs which are created from biodegradable materials so that they will gradually break down with time when exposed to natural environments. Touted as a more environmentally friendly BB, they are sometimes required by certain Airsoft sites to play.
This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.
- Foam Filled
- Spring Core
- 14mm CCW / CW
An Alloy constructed Suppressor with Foam Baffles and a Spring Core for support. The end caps of the Suppressor can be unscrewed to access the internals. Designed for Airsoft replicas with a 14mm CCW or CW Thread, this Muzzle Device is the perfect accessory to conceal an Inner Barrel extension, or just to add a personal touch to your Airsoft Gun.
This suppressor has a clever feature which is that it has a 14mm CCW thread on one end and a 14mm CW thread on the other, as such it is compatible with both thread types.
- Bio BBs
- High gloss finish
- 1000 x 0.25g
Looks like TIPPMANN is moving closer and closer to Airsoft, take that paintballers! The TIPPMAN Eco-Green BBs are constructed from bioplastics with up to 92% degradation, making these BBs an eco friendly alternative to standard ABS BBs! This pack includes 1000 x 0.25g BBs and is supplied in a resealable bag. These BBs are available in classic white or high visibility orange, making your BBs easier to track to the target.
- Illuminates BBs
- Rechargeable Battery
- Motion Sensor On/Off
A compact and modern-looking Tracer Unit for Airsoft Guns w/ a 14mm CCW Threaded Barrel, which will illuminate Tracer BBs to light up the night sky, and help you track your BBs to their target. Featuring high power UV LEDs, a power-saving motion sensor function and an internal rechargeable lithium battery, this is a fine example of a modern Airsoft Tracer Unit.
Like this Airsoft Gun? Check out these awesome Products!
- £20 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- £10 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- Full metal construction
- Matt black with gold outer barrel
- Combat styled Hi-capa long boi
If your friends are using the R604, this pistol is the key to making them feel inadequate! Introducing the R608 Hi-capa Combat XL from Army Armament, a Hi-capa based pistol with a combat leaning, now in a new, lengthened flavour! The pistol combines the well liked aggressively stippled grips of the R604 and JW3 GBB pistols with a shorter dust cover and 5.5-inch outer barrel with extended slide; akin to the original "Silverballer" of the well-known man of hits video game but in a slightly more practical length!
- Full metal construction
- Functional De-cocking lever
- 20mm frame rail and 12mm female threaded barrel
If you are eyeing up a new sidearm but aren't up for the more common Hi-capa and EU series perhaps a classic Italian designed pistol would suit your tastes? Introducing the Raven R9 GBB, Raven's entry into the B9 series of Airsoft pistols. The real B9 was most famously issued to the US Army in the 1980s, replacing the venerable M1911.
- 1:1 Scale Replica
- Supreme build quality
- Beautiful licensed H&K trademarks
If you are after a DMR to match your UKSF loadout, you have found it. The Umarex HK417D AEG is a seriously well built and faithful replica of the HK417, chosen marksman's rifle for special forces all around the world. Put this down next to a real HK417 and you will be hard-pressed to pick out the right one for your Milsim skirmish!
- Textured Grip
- CO2 Compatible
- Square Ironsight
A Gas Blowback Airsoft Pistol built by WE Europe as part of their EU-Series Pistol Range, and is a more compact version of the standard sized EU-Series pistol.
- Accurate Replica
- All Alloy Construction
- Period Authentic Replica
A realistic gas blowback Airsoft replica B9 handgun constructed from alloy and with accurate controls, it is perfect for skirmishing.
- Full metal construction
- Ares E.F.C.S inside
- 7.62mm AR - Perfect for a DMR build
Looking for the base gun for your Airsoft DMR build? The Ares AR-308 series are uniquely equipped for this role, being patterned after real steel AR-10 battle rifles, the M4/AR15's big brother. The AR-308 series are built to dominate, being kitted out with a high torque motor, quick change spring system, the Ares EFCS trigger unit and a rotary HOP-up unit with the opportunity to lock the AEG to semi, either using an Ares programmer unit or mechanically by installing a replacement selector lever if you want to build the inside of the AR-308 to suit the DMR styling of the externals.
The AR-308M is the mid-length offering in the AR-308 line and makes use of a 12.5-inch outer barrel with a 12-inch M-LOK handguard, and the unique Ares Pro stock, offering 5 positions of adjustment. The external build quality of this AEG is absolutely exceptional, with razor-sharp machining throughout and a beautiful matt metallic bronze finish applied. We aren't sure what is more impressive; the high-quality feel of this AEG or its exceptional trigger response and rate of fire, which our fingers cannot outrun on a 7.4V LiPo!
- SR-25 Flip Up Sights
- High Density Polymers
- Excellent Starter Weapon
A nearly full Polymer Airsoft electric M4 with a 20mm handguard rail system that uses extremely high density Polymers like that found on G&G branded Airsoft guns to bring the weapon to a very pleasant weight and feel in the hands.
- 14mm CCW Thread
- Licensed Rail System
- MK18 Platform Replica
This Airsoft Electric Gun is based on the MK18 Platform, and is essentially a Specna Arms CORE Series Replica with a fully licensed Daniel Defense 20mm MK18 Rail System. The MK18 is highly regarded for its' awesome looks, and this is no exception. This is an ideal Starter Gun, or a step-up in quality for someone looking for their next Primary.
- MOSFET System
- POLYMER Version
- KeyMod Rail System
An Airsoft 6mm BB Gun, based on the M4, this is the latest version of the G&G Combat Machine. The weapon is constructed almost entirely from polymer including the Receiver, Stock, Pistol Grip with parts like the Magazine and Stock Tube being alloy.
- Full Alloy Design
- High Quality Finish
- Gas Blowback Pistol
A high quality, faithful, Airsoft 6mm BB replica of the Colt 1911A World War 2 (WWII) .45 ACP Pistol. This highly detailed piece really stands out from the crowd with the satisfying recoil and loud report when it fires.
- M-LOK Compatible
- Dynamic AK Platform
- Multiple Stock Variants
A 6mm BB Airsoft Electric Gun, based on the AK-102, and given a comprehensive overhaul, creating an Operator Platform that is incredibly dynamic.
- Compact CQB Weapon
- Rails for Sights and Accessories
- High Capacity M4 Magazine Adaptor
An Airsoft 6mm Airsoft AEG replica designed to look like the FN P90, produced by FN Herstal in Belgium, supplied with an adaptor to allow the use of m4 magazines including the provided STANAG highcap.
- Folding Stock
- Folding Foregrip
- Railed Hand Guard
An Electric Airsoft rifle based on the world famous and seemingly timeless AK47, now updated with a more practical, and tactical configuration! Complete with a side folding stock, folding vertical foregrip and handguards sporting 20mm Picatinny rails, the CM.028U is perfect for PMC impressionists, and those who want something with rails which isn't an M4!
- The ultimate modern Bullpup
- Serious challenger to the AR15
- Unparalleled ergonomics
We have all been drooling over the real Keltec RDB for years. The RDB is one of the most advanced bullpup rifles in existence and eliminates the hand full of downsides to bullpups that have people wandering around carrying rifles that are too long. It feels like a part of your body when you hold it, with extreme pointability due to the center of balance being around the middle of the receiver. With a steel receiver, high-density polymer parts, and a comfortable rubber buttplate, this AEG is nearly indistinguishable from the real thing, as we have come to expect from ARES.
- Thread Adaptor
- Extended Base Plate
- Light Enhancing Sights
A replica gas blowback Airsoft pistol designed by Army Armaments with a range of advanced features, such as an extended magazine and light enhancing ironsights, and is based on the 1911 platform with a more modern twist.
- Full metal construction
- Modern AK support weapon
- Includes steel folding bipod
If you're an AK fan and you are looking for something bigger, the RPK is what you need! The CM.052A RPK-74M is a faithful replica of the latest variant of the RPK light support weapon, a lengthened and strengthened AK47 based design intended to provide a high volume of fire and increased accuracy at squad level. The CM.052A sports highly realistic construction with a plethora of steel parts, a full-sized dummy bolt carrier, a steel bipod and modern polymer furniture matching that which is currently issued to Russian armed forces. The RPK-74M takes standard AK47/74 AEG magazines, including drum mags, and comes with an extended 45 round style high cap magazine which holds a whopping 800 BBs!