RIS/RAS Rail & Attachments

A replica PEQ-15 device from Nuprol that provides torch illumination, a visible red laser pointer and IR laser pointer - all in one compact package!

If you're looking for stylish external upgrades for your M4/AR-15, check out the Delta Armory CNC Aluminium Strike M-LOK Handguard! This CNC machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with 20mm Picatinny rail along the top, The centre of the upper rail includes a relief cut designed for "C-clamp" or thumb over bore grips but also makes a great spot to mount a pressure switch via velcro or zip ties. This handguard is available in 3 different lengths; 8-inch for CQB builds, 10-inch for mid-length and 13-inch for carbine-length platforms.

Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads which is almost all of them. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the Delta Armory CNC Aluminium Strike M-LOK Handguard will do the trick!

If you're looking for stylish external upgrades for your M4/AR-15, check out the Delta Armory CNC Aluminium Strike M-LOK Handguard! This CNC machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with 20mm Picatinny rail along the top, The centre of the upper rail includes a relief cut designed for "C-clamp" or thumb over bore grips but also makes a great spot to mount a pressure switch via velcro or zip ties. This handguard is available in 3 different lengths; 8-inch for CQB builds, 10-inch for mid-length and 13-inch for carbine-length platforms.

Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads which is almost all of them. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the Delta Armory CNC Aluminium Strike M-LOK Handguard will do the trick!

If you're looking for stylish external upgrades for your M4/AR-15, check out the Delta Armory CNC Aluminium Strike M-LOK Handguard! This CNC machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with 20mm Picatinny rail along the top, The centre of the upper rail includes a relief cut designed for "C-clamp" or thumb over bore grips but also makes a great spot to mount a pressure switch via velcro or zip ties. This handguard is available in 3 different lengths; 8-inch for CQB builds, 10-inch for mid-length and 13-inch for carbine-length platforms.

Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads which is almost all of them. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the Delta Armory CNC Aluminium Strike M-LOK Handguard will do the trick!

If you want to add more rails to your M4/AR-15 AEG without adding more weight, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 will do the trick! This quad 20mm Picatinny railed handguard is styled after the real steel KAC FF RIS, with 7" or 9" length options rocking 20mm Picatinny rails at all points of the clock, ready for your choice of accessories.

Being a free-floated design, this handguard mounts directly to your receiver threads and doesn't come into contact with the barrel, meaning any force applied to the handguard won't negatively affect accuracy. Installation will probably require an M4/AR-15 barrel nut wrench and a certain level of expertise and fitting, though the handguard should fit the vast majority of M4/AR-15 AEG and GBBR platforms. If you're looking for affordable mods or are working on a lightweight polymer sleeper build, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 is ideal!

If you want to add more rails to your M4/AR-15 AEG without adding more weight, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 will do the trick! This quad 20mm Picatinny railed handguard is styled after the real steel KAC FF RIS, with 7" or 9" length options rocking 20mm Picatinny rails at all points of the clock, ready for your choice of accessories.

Being a free-floated design, this handguard mounts directly to your receiver threads and doesn't come into contact with the barrel, meaning any force applied to the handguard won't negatively affect accuracy. Installation will probably require an M4/AR-15 barrel nut wrench and a certain level of expertise and fitting, though the handguard should fit the vast majority of M4/AR-15 AEG and GBBR platforms. If you're looking for affordable mods or are working on a lightweight polymer sleeper build, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 is ideal!

If your M4/AR-15 AEG is a bit scratched up, the Delta Armory Receiver Set for M4/AR-15 AEG will sort that out! This set includes the upper and lower receiver, fire selector switch and front receiver pin, available in high density polymer or alloy construction. If you're working on a lightweight build, the polymer version is ideal. If you want weight and realism, you want the metal version!

Styling-wise, this receiver set is Delta's own design, inspired by real steel "Billet" receivers found on high-end, ultra-modern real steel AR builds. The trigger guard is enlarged and built-in, improving strength when compared to milspec receiver designs, in line with the latest real steel ARs hitting the market. As we might expect, we are treated to a 20mm Picatinny receiver rail running along the top, ready for a red dot sight, scope or iron sights. 

If you're building from scratch, you will need a charging handle, magazine release, dust cover and mock rear pin to complete the receiver itself, along with your internals and pistol grip. While we can make no guarantees, parts from most other brands should fit this receiver without issues. Whether you need a bargain receiver for a scratch build or want to change the build style of an existing M4/AR-15 AEG, the Delta Armory Receiver Set for M4/AR-15 AEG will do the trick!

A simple and easy-to-use Vertical Foregrip for Airsoft Replicas, compatible with 20mm RIS/RAS (Picatinny Rail Systems). To install the Grip, simply unscrew the base of the Grip and slide it over the 20mm Rail. Tightening the base of the Grip will raise the middle section of the Grip and lock it into a Rail Slot (if you've aligned it correctly). This will give you a comfortable platform to grip and brace your Airsoft Gun, making for steadier and more viable aiming, even in the heat of the moment.

An ergonomically designed 20mm RIS foregrip, created to promote a comfortable and natural grip on their Airsoft gun. Constructed from high quality polymer with a slightly textured surface.

An ergonomically designed 20mm RIS foregrip, created to promote a comfortable and natural grip on their Airsoft gun. Constructed from high quality polymer with a slightly textured surface.

A Vertical Foregrip designed to be attached onto the Front Handguard of Rifles and Submachine Guns to give the user a more stable grip on the weapon. 

A very easy to use fore grip that can be locked in a compact or full vertical position depending on your situation and requirements. 

A replacement dust cover for the top of CYMA CM.040 AK47 Variant Rifles, designed to add a top 20mm RIS / RAS Rail for the attachment of Sights and Scopes without the use of a Side Scope Mount. 

A slight angled fore grip designed to stiffen up your grip and aid in improved accuracy down range. A must for anyone wishing to keep a low profile and slick look but gain a tactical advantage on a longer weapon or super CQB package.

A slight angled fore grip designed to stiffen up your grip and aid in improved accuracy down range. A must for anyone wishing to keep a low profile and slick look but gain a tactical advantage on a longer weapon or super CQB package.

If you're looking for a rail riser for a clearer view down your optic, the PTS Syndicate Unity Tactical FAST 20mm Picatinny Optic Riser; Polymer Version should suit your needs perfectly. This riser is based on the real steel Unity Tactical FAST riser, designed to provide a more natural neck position for improved comfort and faster target acquisition, especially for full-face mask and respirator users. 

Being constructed from high-density polymer makes this version of the PTS Unity Riser around half the price of the original aluminium version while offering the same performance as it pertains to Airsoft. If you're seeking a riser and want something a little more tacticool, the PTS Syndicate Unity Tactical FAST 20mm Picatinny Optic Riser; Polymer Version is exactly that!

Can be fitted to Airsoft Weapons to lift up Sights and Scopes making them easier to use with Full Face Protection and other Masks. 

If you are the type of Airsofter who loves the latest and greatest mission essential equipment you must have been waiting for this moment! The WADSN ET OGL White Light Illuminator/Aiming Laser; Red & IR is a close replica of a well known real steel laser device and is constructed from CNC aluminium with flawless precision. 

The unit contains a 150-lumen white light illuminator, a red visible aiming laser and an infrared (IR) laser which can be used in various combinations and either with the included Crane jack pressure switch or aftermarket dual switches. Mode selection is provided by a rotary dial on the rear, and the unit requires a single CR123A 3V cell (not included) to function. If your mates are all running PEQ-15 and DBAL units and you want to make them jealous, the OGL will do just that!

A set of six Polymer 20mm Rails which will fit into KeyMod or M-LOK slots to provide a more standard rail where there normally would not be.

A set of six Polymer 20mm Rails which will fit into KeyMod or M-LOK slots to provide a more standard rail where there normally would not be.

If you are looking for the Special Forces tactical flashlight of choice, you have found it! Or a near-perfect replica of it, that is! The NUPROL NX600 Scout Tactical Flashlight - Short is a close replica of the real world SF M300 Scout light, the tactical flashlight of choice for special forces around the world. The NX600 is designed to be mounted to 20mm Picatinny rails with its integral mount and can be set up with either the push-button tail cap or a pressure switch, both of which are included in the package. The "short" version of the Scout Light would be a fantastic choice for a short CQB optimised Airsoft primary, offering all the flexibility of the original Scout in a shorter and lighter package. 

If you are looking for the Special Forces tactical flashlight of choice, you have found it! Or a near-perfect replica of it, that is! The NUPROL NX600 Scout Tactical Flashlight - Short is a close replica of the real world SF M300 Scout light, the tactical flashlight of choice for special forces around the world. The NX600 is designed to be mounted to 20mm Picatinny rails with its integral mount and can be set up with either the push-button tail cap or a pressure switch, both of which are included in the package. The "short" version of the Scout Light would be a fantastic choice for a short CQB optimised Airsoft primary, offering all the flexibility of the original Scout in a shorter and lighter package. 

If you are looking for the Special Forces tactical flashlight of choice, you have found it! Or a near-perfect replica of it, that is! The NUPROL NX600 Scout Tactical Flashlight is a close replica of the real world SF Scout light, the tactical flashlight of choice for special forces around the world. The NX600 is designed to be mounted to 20mm Picatinny rails with its integral mount and can be set up with either the push-button tail cap or a pressure switch, both of which are included in the package. Whether you have a need to distract the enemy as you clear rooms, see where you are going in the darkest of dark CQB sites or you just want your primary to really look the part, a scout style flashlight like the NX600 would be an excellent choice! 

If you are looking for the Special Forces tactical flashlight of choice, you have found it! Or a near-perfect replica of it, that is! The NUPROL NX600 Scout Tactical Flashlight is a close replica of the real world SF Scout light, the tactical flashlight of choice for special forces around the world. The NX600 is designed to be mounted to 20mm Picatinny rails with its integral mount and can be set up with either the push-button tail cap or a pressure switch, both of which are included in the package. Whether you have a need to distract the enemy as you clear rooms, see where you are going in the darkest of dark CQB sites or you just want your primary to really look the part, a scout style flashlight like the NX600 would be an excellent choice! 

If you have a small gun but a big need for illumination, or if you want the latest compact, high speed PEQ style laser unit, the DBAL-A2 from WADSN may be what you have been looking for! With more functions than the space shuttle and a compact lightweight form, you need your excuses ready to not want this on your primary!

WADSN are considered by many to be the gold standard in terms of torches and switches with this modbutton being no exception. The pressure switch is used for remote activation of a flashlight and is constructed from rubber for a tactile feel. The housing attaches easily to a Picatinny rail system, however if you would prefer to attach it to an M-LOK system, WADSN have fortunately included an adaptor, giving you that option.

If you are looking for a grip that also converts into a bipod but looking for weight and solid construction then this is for you. 

A Multifunction LED flashlight with 3 modes of operation, full power, low power or strobe effect. Can be mounted on most Airsoft guns with 20mm Picatinny rails. The flashlight is powered by 3x AAA batteries (not included) and comes with an integrated 20mm rail mount, a mount for the handlebars of a bike and a belt mount. 

If you are an AK fan but are getting green-eyed over the M4/AR-15's accessory options, a railed handguard will cure that! The CYMA 20mm Picatinny Railed Handguard for AK AEG is constructed from solid high density polymer and provides 20mm Picatinny rails at the 3, 6, 9 and 12 o'clock positions, ready for 20mm Picatinny accessories.

The side rails are short lengths, ideally designed to mount a tactical flashlight or aiming laser but can also be removed if you prefer slick sides on your handguard. The top rail features 12cm of rail space, allowing for a forward mounted red dot sight to be fitted for that slick PMC look. The bottom rail is 11cm long, providing enough room at the front so you can add a vertical or angled foregrip, or even a bipod if you see fit. The sides of the lower handguard also include ribs for extra grip, similarly to the standard issue AK-10x polymer handguards. If you want to mount your mission essential kit to your AK AEG or GBBR this handguard is one of the cheapest ways to do it!

If you are having a hard time seeing down your low-profile red dot sight, a rail riser will make all the difference! The Vector Optics 0.83" 20mm Picatinny Rail Riser Mount is designed to assist those who struggle to see down their red dot sight, either because of a very low profile mount, a full face mask or neck pain.

The riser offers a 4cm length of 20mm Picatinny rail raised 0.83"/2.2cm above the height of the original rail to which it is mounted. Being constructed from aluminium with a steel mounting bolt, this riser keeps added weight to an absolute minimum. Mounting the riser is as simple as mounting your red dot; simply align it with your rail and tighten down the thumb screw on the side. The centre of the riser is also milled out to provide a channel through which the iron sights on certain platforms can still be used which also helps with weight reduction.

If you are having a hard time getting your face low enough to see through your optic, this riser should solve that issue and get you shooting straight!