Specna Arms Airsoft

If you need to load up on M4/AR-15 mid-caps, the Specna Arms 125rnd S-Mag Mid-Cap Magazine for M4/AR-15 AEG; Set Of 5 is ideal! This great value magazine multipack includes 5 S-Mag Mid-caps holding 125 BBs each, loaded through the fill/feed port at the top of the mag body using a speed loader, as with other mid-caps.

The S-Mag boasts a uniquely modern design, patterned after popular real steel polymer magazines with SA texture on each side to improve grip and wet weather handling. These magazines are known for their robust nature, wide compatibility and low weight and should fit and feed in almost any M4/AR-15 AEG out there, along with other compatible platforms such as 416 AEGs, SCAR-L AEGs and L85 AEGs. If you want to load up on mid-caps in one go, this is one of the best (and most affordable) ways to do it!

If you prefer the tried and tested vertical foregrip over other gripping options but want something a little more modern than the average VFG, the Specna Arms Angled Vertical Foregrip may be just what you have been looking for! This grip can be attached to any 20mm Picatinny rail surface and features a slightly swept-back angle, intended to encourage a more comfortable wrist position whilst still making use of the advantages of a traditional vertical foregrip.

If you are in the market for a lightweight and reliable backup to your primary AEG for when things go wrong, or you are new to the sport and want something that will get you off to a flying start, the FLEX™ series of Airsoft AEGs from Specna Arms are designed to provide just that! The FLEX™ series sport the usual impressive internal feature set Specna Arms are known for, including a tight bore inner barrel, rotary adjustable HOP-up unit and metal gearbox with steel gears, housed in a robust fibre reinforced polymer body with an alloy outer barrel for added strength where needed.

If you are in the market for a lightweight and reliable backup to your primary AEG for when things go wrong, or you are new to the sport and want something that will get you off to a flying start, the FLEX™ series of Airsoft AEGs from Specna Arms are designed to provide just that! The FLEX™ series sport the usual impressive internal feature set Specna Arms are known for, including a tight bore inner barrel, rotary adjustable HOP-up unit and metal gearbox with steel gears, housed in a robust fibre reinforced polymer body with an alloy outer barrel for added strength where needed.

A LiPo Battery for Airsoft Electric Guns, with a 7.4V rating and 1200mAh capacity. This LiPo Battery is laid out in a Nunchuck / Crane Stock configuration, which makes it ideal for Handguards and AR Stocks thanks to the slim design. If you own a battery-powered Airsoft Gun and need a compact LiPo with a sensible capacity, then these are perfect for you. Features a Mini Tamiya Connector.

If you need more mags to keep your Specna Arms SA-X or SA-FX series SMG doing what it does best, this should suit you! The Specna Arms 200rnd S-MAG High Cap Magazine for SA-X & SA-FX AEG is a wheel wound high capacity magazine which holds 200 BBs. The magazine can be loaded through the fill window on the top of the magazine body by opening the fill window door and pouring your BBs straight in. The winding wheel is located on the baseplate and needs to be wound up to keep the magazine feeding.

The external design of this magazine matches other Specna Arms S-MAG style magazines, with SA logo textured panels on either side to add grip and enhance the aesthetic and an extended baseplate to make the mag easier to pull from pouches when a fast reload is required. Being based on the G&G ARP9 magazine design, this mag may also work in other AEG platforms designed for ARP9 magazines but is ideal for Specna Arms SA-X and SA-FX series AR-9 SMGs.

Looking for a slick full metal M4/AR15 platform with some tasty pre-upgraded internals? The SA-E07 is exactly that! This modern KeyMod handguard equipped M4/AR15 has been around the block before, but the newest version now boasts Specna Arms' unique "Light Ops" stock which is their own take on a low profile stock with some choice refinements and a fresh look unlike anything else.

The SA-E07 holds the line with its rock solid EDGE™ series internals, including the reinforced ORION™ gearbox, 6.03mm tightbore inner barrel and Gate X-ASR MOSFET already wired in. Whether you are an experienced skirmisher looking to expand the armoury or a new player who wants to jump straight in with a full metal primary, the SA-E07 with the Light Ops stock is a fantastic choice whether you are a CQB player or you prefer a bit of woodland warfare!

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

A 7.4v LiPo Battery for Airsoft Electric Guns, specifically the Specna Arms PDW range and other replicas with a tight/compact Battery Compartment. The Battery has a capacity of 600mAh, and a discharge rate of 20/40C. The compact size of the Battery makes it ideal for PDW Stocks, Pistol Grips, PEQ Boxes and other tight battery spaces.

A 7.4v rated LiPo Battery for Airsoft Electric Guns, specifically ones that need a compact battery for a small space, such as PDW Stocks and Pistol Grips. The Battery has a 600mAh Capacity and a 20/40C Discharge Rate, as well as having a Mini Tamiya Connector to make it compatible with a huge range of Airsoft Guns. If you need a compact 7.4v LiPo for a Specna Arms PDW or other Airsoft Gun with a tight battery space, then this is the ideal choice.

The SA-C22 CORE™ is an M4/AR15 style Airsoft AEG with a CNC machined Aluminium handguard featuring M-LOK attachment slots for the addition of accessories. The CORE™ range from Specna Arms is designed for new players to the sport, offering pre-upgraded internals in a wear-resistant and lightweight polymer body.

The SA-C22 CORE™ is an M4/AR15 style Airsoft AEG with a CNC machined Aluminium handguard featuring M-LOK attachment slots for the addition of accessories. The CORE™ range from Specna Arms is designed for new players to the sport, offering pre-upgraded internals in a wear-resistant and lightweight polymer body.

If you have an M4/AR15 oriented loadout but you want something with a fresh modern look, the SA-E09-RH from Specna Arms should scratch that itch! We have seen the SA-E09 before, but the new version boasts a unique Specna Arms AR receiver with ambidextrous controls, weight reducing cuts and a modern style inspired by real world "billet" receiver designs. 

The SA-E09-RH isn't just a pretty face; being an EDGE 2.0™ AEG, it is built with some of the best internal components available currently, including the impressively advanced Gate ASTER MOSFET, a high torque motor and a smattering of reinforced gearbox components housed in the renowned Specna Arms ORION gearbox with a 6.03mm tightbore inner barrel and rotary HOP-up unit to ensure your rounds are delivered accurately. To make matters all the sweeter, the SA-E09-RH is fitted with Specna Arms' Heavy Ops stock, giving it loads of battery space and matching the modernised receiver perfectly.  

Specna Arms are at it again with an Airsoft replica of the AR36, a lightweight rifle featuring electric blowback no less, giving you a satisfying recoil with every shot and giving you that added realism.

The SA-G12 comes ready to rock straight out of the box, boasting 3 front handguard 20mm rails and a raised top rail for tactical accessories as well as a side folding stock for CQB use and fully ambidextrous controls. A rough and ready AEG for both new and veteran players alike!

Add a foregrip your rifle for maximum control. The grip is secured tightly onto rails by first sliding it on then screwing the bottom until it is locked in place. The grip can be placed anywhere up and down a Quad Rail, and is designed to allow the user to chose where the additional control point on their weapon is placed. The further forward the grip is placed the slower the barrel will turn, and the further back the grip is placed the faster the barrel will turn. This is the perfect purchase for those Airsofters who want to add a bit of flair to their weapon, or want a grip on the front of their weapon.

A LiPo Battery for Airsoft Electric Guns, with an 11.1v rating and 600mAh capacity. This compact 11.1v LiPo is ideal for PDWs and Airsoft Guns with a small battery space (specifically the Specna Arms PDWs), and features a Mini Tamiya Connector to connect to your AEG. If you have an Airsoft Gun that needs an 11.1v Battery, and has a tight battery compartment, then this is the ideal LiPo for you.

Specna Arms have been the name in affordable pre-upgraded M4/AR15 AEGs for some time now, and the SA-E06 is a proven platform. The new version keeps all the good bits and adds even more, featuring the new Specna Arms Heavy Ops stock, part of their innovative SAAS accessory line.

The SA-E06H is fitted with a reinforced ORION™ gearbox, 6.03mm tightbore inner barrel and Gate X-ASR MOSFET already wired in, protecting the battery with its smart fuse functionality. Whether you are an experienced skirmisher looking to expand the armoury or a new player who wants to jump straight in with a full metal primary, the SA-E06-H would make a fantastic companion on the battlefield!

The Specna Arms SA-E10 PDW EDGE™ is an AR Platform Airsoft Electric Gun featuring the ORION Gearbox, crammed full of goodies that make this an excellent choice straight out of the box. This version of the rifle comes with a PDW Style Stock that helps keep overall length down, and makes it ideal for all locations and arenas.

The Specna Arms SA-E10 PDW EDGE™ is an AR Platform Airsoft Electric Gun featuring the ORION Gearbox, crammed full of goodies that make this an excellent choice straight out of the box. This version of the rifle comes with a PDW Style Stock that helps keep overall length down, and makes it ideal for all locations and arenas.

Specna Arms present the SA-E20 Edge™, a massive update over the CORE variant, featuring the reinforced ORION Gearbox with more uprated components than you can shake a stick at. Whether you're brand new to Airsoft and looking for the best first Airsoft Gun, or you're a seasoned player looking for the 'next step' on their Airsoft career, then the SA-E20 EDGE™ is a perfect contender.

Specna Arms present the SA-E20 Edge™, a massive update over the CORE variant, featuring the reinforced ORION Gearbox with more uprated components than you can shake a stick at. Whether you're brand new to Airsoft and looking for the best first Airsoft Gun, or you're a seasoned player looking for the 'next step' on their Airsoft career, then the SA-E20 EDGE™ is a perfect contender.

If you like the look of the AKS-74U but need something a bit longer, the Specna Arms SA-J08 EDGE™ 2.0 is definitely your style! This AK AEG hybridizes the front end design of the AK-105 with the real wood handguards and steel skeleton folding stock of the AKS-74, giving you what we have dubbed the "AKS-105".

The SA-J08 boasts full metal construction, making use of more than its fair share of steel and stamped steel parts for the appropriate heft any realistic AK replica deserves and also has beautifully finished real wood handguards with a deep and varied wood grain and flawlessly realistic shape. Externally, this AK is spot on, and on the inside things get even better!

The rock solid and well renowned Specna Arms ORION V3 gearbox is backed up by the ever-impressive Gate ASTER MOSFET, offering improvements in electrical efficiency which translates to better trigger response time and higher ROF, programmable fire controls allowing for burst mode and binary trigger, and even more functions when paired with the Advanced Firmware and Gate Control Station app. The icing on the cake is a 6.03mm tightbore inner barrel, alloy HOP-up unit and Helium™ flat HOP bucking, promising accuracy and range far beyond rival AK platforms in this price range. If you need an AK that shoots as good as it looks and needs no upgrades to compete, the SA-J08 is the perfect choice!

An 11.1v rated LiPo Battery for Airsoft Electric Guns, featuring a Deans Connector to provide an efficient connection to your AEG. With a 600mAh Capacity, the overall dimensions are quite small, making it ideal for PDW Stocks, Pistol Grips and other really tight Battery Compartments.

A highly realistic replica of the instantly recognisable M4A4 platform, which features Zinc Aluminium externals, excellent internal parts, a quick change spring, GATE MOSFET and fully licensed, engraved trademarks.

This Airsoft Electric Gun is a replica of the M249 MK2 with a comfortable Fixed Stock that it is more commonly seen with. It is designed to be lightweight, but is still incredibly rugged, coming in at 4.77KG. As you would expect from Specna Arms, it is packed with Quality of Life features such as a Quick Change Spring System, Microswitch Trigger Unit and an Auto-Winding 2500rnd Box Magazine.

The Specna Arms SA-G12V is an AR36 Platform Airsoft Electric Gun that features a realistic Electronic Blowback to rattle the Gun in your shoulder, for immersive and fun shooting. With a Folding/Sliding Stock for easy transport and effective CQB operation, as well as a Quick Change Spring, Microswitch Trigger, 14mm CW Thread for Suppressors and an Individual Serial Number, this is a brilliant all-round AEG that is very tough and user friendly.

Please note, the vertical foregrip shown in the product images is no longer included and is shown for demonstration purposes only. 

The Specna Arms SA-G12V is an AR36 Platform Airsoft Electric Gun that features a realistic Electronic Blowback to rattle the Gun in your shoulder, for immersive and fun shooting. With a Folding/Sliding Stock for easy transport and effective CQB operation, as well as a Quick Change Spring, Microswitch Trigger, 14mm CW Thread for Suppressors and an Individual Serial Number, this is a brilliant all-round AEG that is very tough and user friendly.

Please note, the vertical foregrip shown in the product images is no longer included and is shown for demonstration purposes only. 

If you want a modern AK variant but you want it light for a fast moving playstyle, this one will do the trick! The SA-J72 from Specna Arms is designed to replicate the real steel AKS-74M, a modernisation of the AKS-74, the original side folding AK rifle. This AK uses the VFC style of external construction, meaning pins and rivets instead of screws, a skeleton side folding stock made from steel and as close as is possible to realistic disassembly with an AEG.

The SA-J72 weighs a mere 2.5kg approximately, and Specna gets away with this with a high density polymer receiver, gas tube and gas block which has the added benefit of increasing the rifle's resistance to scratches. We have been waiting for a modern AK in the featherweight category, and finally, it is here!

The Specna Arms SA-249 PARA CORE is a lightweight yet incredibly tough LMG powered by Electric. Lightweight is in quotation marks as it has a Polymer Receiver, Handguard and Pistol Grip so that it is comfortable to use for long periods of time, but still comes in at just shy of 5kg. Coming packed with a Quick Change Spring System, Micro-switch Trigger Unit, Steel Gear Set and Electric Auto-Winding Box Magazine, what's not to love?

The Specna Arms SA-249 PARA CORE is a lightweight yet incredibly tough LMG powered by Electric. Lightweight is in quotation marks as it has a Polymer Receiver, Handguard and Pistol Grip so that it is comfortable to use for long periods of time, but still comes in at just shy of 5kg. Coming packed with a Quick Change Spring System, Micro-switch Trigger Unit, Steel Gear Set and Electric Auto-Winding Box Magazine, what's not to love?

If you are looking for an AK that doesn't weigh double what an M4 does but is also suitable for a modern Russian loadout, you just found one! The SA-J73 is a near perfect replica of the AK-105, the prettiest AK out there in our opinion. This AK uses the VFC style of external construction, meaning pins and rivets instead of screws, a realistically slim side folding stock and as close as is possible to realistic disassembly with an AEG.

The SA-J73 weighs a mere 2.5kg approximately, and Specna gets away with this with a high density polymer receiver, gas tube and gas block which has the added benefit of increasing the rifle's resistance to scratches. We have been waiting for a modern AK in the featherweight category, and finally, it is here!

Part of Specna's 'EDGE' series, this AEG is crammed with quality goodies such as the GATE X-ASR MOSFET, reinforced internals coupled with the ORION Gearbox, as well as a unique Alloy handguard and engraved receiver.

The SA-H23 from Specna Arms is a 416-style replica with a mid length front end, flat trigger and rotary drum dioptre sights. Being an EDGE 2.0™ Series replica, it also comes pre-installed with the GATE ASTER MOSFET V2 and its Orion Gearbox features a Quick Change Spring System, keeping up with the best Airsoft AEGs out there!

The SA-C10 CORE™ is an M4/AR15 style Airsoft AEG with a CNC machined aluminium 20mm Picatinny quad railed handguard for the addition of accessories, and a sound amplifier pre-installed for some psychological warfare in CQB. The CORE™ range from Specna Arms is designed for new players to the sport, offering pre-upgraded internals in a wear-resistant and lightweight polymer body.

Looking for a full metal M4/AR15 platform with some tasty pre-upgraded internals and a unique colour scheme? The SA-E07 is exactly that! This modern KeyMod handguard equipped M4/AR15 has been around the block before, but the newest version now boasts Specna Arms' unique "Light Ops" stock which is their own take on a low profile stock with some choice refinements and a fresh look unlike anything else.

The SA-E07 holds the line with its rock solid EDGE™ series internals, including the reinforced ORION™ gearbox, 6.03mm tightbore inner barrel with rotary HOP-up unit and Gate X-ASR MOSFET pre-installed. Whether you are an experienced skirmisher looking to expand the armoury or a new player who wants to jump straight in with a full metal primary, the SA-E07 with the Light Ops stock is a respectable addition to any armoury!

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

This is for a pack of 5 magazines for the player who sees nonstop action!

An almost exclusively Alloy constructed MK18 style M4 based electric replica, with some seriously hardcore anodised Alloys and Nylon fiber reinforced Polymers for an amazing build quality.

An almost exclusively Alloy constructed MK18 style M4 based electric replica, with some seriously hardcore anodised Alloys and Nylon fiber reinforced Polymers for an amazing build quality.

A Zinc Aluminium, Steel and Alloy constructed Airsoft Electric Gun based on the highly successful M4A4 platform; featuring a 20mm railed handguard, X-ASR MOSFET, quick change spring and more.

If you are in the market for a lightweight and reliable backup to your primary AEG for when things go wrong, or you are new to the sport and want something that will get you off to a flying start, the FLEX™ series of Airsoft AEGs from Specna Arms are designed to provide just that. The SA-F03 is the 3rd member of the FLEX™ line and introduces an M-LOK handguard to the tried and tested FLEX™ formula for a sleek and modern front end and maximum accessorization possibilities.

Inside the SA-F03 we can find the usual goodies, including a rotary adjustable HOP-up paired with a 6.03mm tightbore inner barrel and a rock solid metal gearbox with 8mm bushings, the ESA™ quick change spring system and full compatibility with version 2 gearbox upgrades. Whether its a project gun for a veteran skirmisher or a primary weapon for those about to take off on their Airsoft adventure, a Specna Arms FLEX™ AEG is a tool to contend with on the skirmishfield!

If you are in the market for a lightweight and reliable backup to your primary AEG for when things go wrong, or you are new to the sport and want something that will get you off to a flying start, the FLEX™ series of Airsoft AEGs from Specna Arms are designed to provide just that. The SA-F03 is the 3rd member of the FLEX™ line and introduces an M-LOK handguard to the tried and tested FLEX™ formula for a sleek and modern front end and maximum accessorization possibilities.

Inside the SA-F03 we can find the usual goodies, including a rotary adjustable HOP-up paired with a 6.03mm tightbore inner barrel and a rock solid metal gearbox with 8mm bushings, the ESA™ quick change spring system and full compatibility with version 2 gearbox upgrades. Whether its a project gun for a veteran skirmisher or a primary weapon for those about to take off on their Airsoft adventure, a Specna Arms FLEX™ AEG is a tool to contend with on the skirmishfield!

An Airsoft electric rifle made from Zinc Aluminium and Steel, with a wealth of up-rated internal parts to make a rifle that shoots as great as it looks. Part of Specna's EDGE series, this rifle features an X-ASR MOSFET and quick change spring system as standard.

An Airsoft electric rifle made from Zinc Aluminium and Steel, with a wealth of up-rated internal parts to make a rifle that shoots as great as it looks. Part of Specna's EDGE series, this rifle features an X-ASR MOSFET and quick change spring system as standard.

Now Specna Arms has joined the AR-9 gang! Introducing the SA-X02 EDGE 2.0™ AR-9, Specna Arms' attempt to dethrone the legendary ARP9. The SA-X02 boasts full metal construction, ambidextrous controls and the superb Specna Arms ORION™ gearbox made all the better with a high torque motor and the game-changing Gate ASTER MOSFET.

On the outside, the SA-X02 boasts a totally unique look, with an officially licenced Strike Industries M-LOK handguard, a modern "billet" style receiver with weight-reducing cuts and an ergonomic pistol grip with a reduced grip angle which pairs perfectly with its compact PDW stock. If you are looking for an AR-9 which doesn't look like everyone else's and brings some seriously impressive performance to the table, the SA-X02 would be a great addition to your arsenal!

Now Specna Arms has joined the AR-9 gang! Introducing the SA-X02 EDGE 2.0™ AR-9, Specna Arms' attempt to dethrone the legendary ARP9. The SA-X02 boasts full metal construction, ambidextrous controls and the superb Specna Arms ORION™ gearbox made all the better with a high torque motor and the game-changing Gate ASTER MOSFET.

On the outside, the SA-X02 boasts a totally unique look, with an officially licenced Strike Industries M-LOK handguard, a modern "billet" style receiver with weight-reducing cuts and an ergonomic pistol grip with a reduced grip angle which pairs perfectly with its compact PDW stock. If you are looking for an AR-9 which doesn't look like everyone else's and brings some seriously impressive performance to the table, the SA-X02 would be a great addition to your arsenal!

An Airsoft Electric Gun based on the M4 platform, which features a modular URX style handguard for complete tactical flexibility, as well as a wealth of internal goodness that you would expect to see on a rifle at a much higher price point.

An Airsoft Electric Gun based on the M4 platform, which features a modular URX style handguard for complete tactical flexibility, as well as a wealth of internal goodness that you would expect to see on a rifle at a much higher price point.

If you're in the mood for a lightweight and agile AR-9, the Specna Arms SA-FX01 FLEX™ AR-9 SMG AEG; Gate X-ASR Edition is one to watch. This high-density polymer AR-9 style SMG has been around the block before, but this version is equipped with the Gate X-ASR in-line MOSFET to prevent reverse polarity and provide diagnostic functions via its 2 L.E.D indicators.

Inside, you will find an alloy version 2 gearbox with 18:1 ratio steel gears, a 6.03mm tightbore inner barrel and a rotary HOP-up unit, giving you the edge in accuracy and air-efficiency straight out of the box with room for further upgrades in the future thanks to compatibility with commonly available version 2 gearbox parts. If you want to try your hand with an AR-9 platform without spending too much, the Specna Arms SA-FX01 FLEX™ AR-9 SMG AEG; Gate X-ASR Edition is perfect!

If you're in the mood for a lightweight and agile AR-9, the Specna Arms SA-FX01 FLEX™ AR-9 SMG AEG; Gate X-ASR Edition is one to watch. This high-density polymer AR-9 style SMG has been around the block before, but this version is equipped with the Gate X-ASR in-line MOSFET to prevent reverse polarity and provide diagnostic functions via its 2 L.E.D indicators.

Inside, you will find an alloy version 2 gearbox with 18:1 ratio steel gears, a 6.03mm tightbore inner barrel and a rotary HOP-up unit, giving you the edge in accuracy and air-efficiency straight out of the box with room for further upgrades in the future thanks to compatibility with commonly available version 2 gearbox parts. If you want to try your hand with an AR-9 platform without spending too much, the Specna Arms SA-FX01 FLEX™ AR-9 SMG AEG; Gate X-ASR Edition is perfect!

At long last, the humble AR36 platform has received the attention it deserves! This stunning replica features the finest construction materials, an updated combo handguard and an Earth-shattering electric blowback function. 

At long last, the humble AR36 platform has received the attention it deserves! This stunning replica features the finest construction materials, an updated combo handguard and an Earth-shattering electric blowback function. 

Specna's ORION™ reinforced gearbox has gained an excellent reputation since it was released installed in the EDGE™ series of AEGs, and now Specna are offering you the opportunity to create your next gearbox build with a solid, reliable shell to tie it all together. Rated to handle heavy springs and including enhancements such as radiused cylinder windows and quick change spring functionality, the ORION™ gearbox shell is probably a tad more affordable than it should be!

The Specna Arms SA-H03 is a full Zinc/Aluminium Alloy electric powered Airsoft replica of a popular 'Special Forces' favourite. Internally and externally, Specna Arms haven't compromised on quality at any point.

If you are keeping your eye out for a modernised 416 style AEG platform, the Specna Arms SA-H12 ONE™ Carbine would be a fantastic choice. As part of Specna Arms' ONE™ range, the SA-H12 boasts full metal construction and flawless sand blasted and anodised finish across all parts, offering you the choice of tactical black or stylish and modern multi-bronze finish, matching the real rifle perfectly. 

On the inside, the SA-H12 is equally impressive, with a reinforced version 2 gearbox equipped with steel gears, 8mm ball bearing bushings, a steel spring guide and the Enter & Convert quick change spring system, allowing for quick and easy power tuning without opening the gearbox. 

The most recent batch of SA-H12s has also been upgraded with the latest rotary HOP-up unit design for the M4/AR-15 platform, offering finer increments of adjustment and improved ability to hold its setting under the vibrations of full auto fire. All of the internals are Tokyo Marui AEG spec, opening up almost limitless upgrade potential, from adding a MOSFET to an HPA engine. If you are after a 416 but want something slicker and quicker than the usual quad-railed configuration, the SA-H12 ONE™ is the one to go for!

An electric powered replica of the classic M4A1 platform, complete with a shorter barrel than standard. The Specna Arms EDGE series of replicas has loads of features that set them apart from any other out-of-the-box AEG.

Built to a stunning standard, this faithful replica ticks all the boxes. The SA-H11 features a 416 style receiver, hand guard, grip and stock and a lovely QUAD RIS style handguard which all come together to make one beautiful and highly ergonomic Airsoft replica.

Built to a stunning standard, this faithful replica ticks all the boxes. The SA-H11 features a 416 style receiver, hand guard, grip and stock and a lovely QUAD RIS style handguard which all come together to make one beautiful and highly ergonomic Airsoft replica.

Based off the rifle length M4A1 used by the US Army and Marines this rifle is a high quality replica built by Specna Arms as part of their CORE beginner rifles range.

Entirely ambidextrous controls on an AR platform, giving the ultimate in usability to every shooter. The Perfect length for CQB and still a fantastic performer outside too.

Built by Specna Arms as part of their G11 series of AR36 clone rifles, but this one has a difference. Not only does it have a non-standard KeyMod handguard, but also features an internal electronic blowback system which gives the AEG a more exiting firing experience with a bit of recoil for enhanced realism. 

The Specna Arms SA-E12 PDW EDGE™ is an AR Platform Airsoft Electric Gun featuring the ORION Gearbox, crammed full of goodies that make this an excellent choice straight out of the box. This version of the rifle comes with a PDW Style Stock that helps keep overall length down, and makes it ideal for all locations and arenas.

A solid and dependable AR Platform Airsoft Gun, powered by a Battery in the Stock. This 2.0 variant of the Specna Arms EDGE Series updates the MOSFET with a GATE ASTER™ for more control than ever before, as well as a Solar™ Electronic Trigger and Helium™ Flat HOP Bucking. Packaged with the uprated internals that makes the EDGE series so special, this is one exceptional 'out of the box' Airsoft Gun. Whether you're a new player wanting to get the most for their money, or an experienced player looking for the next step up in quality, then the Specna Arms SA-E23 EDGE 2.0 is exactly that.

Available in Black or with a gorgeous dual-tone Chaos Bronze highlight.

An Aluminium, Zinc and Steel constructed replica which features the GATE X-ASR MOSFET for rapid trigger response and longer life. Featuring up-rated internals and a quick change spring on the gearbox, the SA-E13 Edge is not one to miss.

Introducing the Specna Arms SA-X01, Specna's first AR-9 AEG platform. The SA-X01 boasts full metal construction with a unique modern receiver based on real steel "billet" receiver designs, fully ambidextrous controls and the legendary Gate ASTER™ MOSFET pre-installed.

The heart of the platform is the renowned ORION™ V2 gearbox and a high torque motor, giving the platform the snappy trigger response and rate of fire expected of a platform designed for CQB and aggressive run and gun playstyles, and we are also treated to a 6.03mm tightbore inner barrel and rotary HOP-up unit, providing plenty of range to compete outdoors. The SA-X01 is ready to go toe to toe with the well-respected ARP9, and for those who want an AR-9 but require the realistic feel of full metal construction, the SA-X01 is perfect!

Introducing the Specna Arms SA-X01, Specna's first AR-9 AEG platform. The SA-X01 boasts full metal construction with a unique modern receiver based on real steel "billet" receiver designs, fully ambidextrous controls and the legendary Gate ASTER™ MOSFET pre-installed.

The heart of the platform is the renowned ORION™ V2 gearbox and a high torque motor, giving the platform the snappy trigger response and rate of fire expected of a platform designed for CQB and aggressive run and gun playstyles, and we are also treated to a 6.03mm tightbore inner barrel and rotary HOP-up unit, providing plenty of range to compete outdoors. The SA-X01 is ready to go toe to toe with the well-respected ARP9, and for those who want an AR-9 but require the realistic feel of full metal construction, the SA-X01 is perfect!

Specna continue with their exceptional EDGE 2.0 line with the SA-E13-RH. An ultra-modern carbine that features a totally unique looking front end with weight-reducing cuts that show off the glorious 14.5 inch barrel. Included are a host of unique Specna external goodies such as the refined "billet" style receiver and Heavy Ops Stock.

But Specna's quest to modernise Airsoft doesn't stop there as the SA-E13-RH comes with a wealth of top-notch internals such as the advanced Gate ASTER MOSFET, a high torque motor and a healthy helping of reinforced gearbox components all contained in the glorious ORION gearbox with a 6.03mm tightbore inner barrel and rotary HOP-up unit, all coming together for an impressively accurate and advanced carbine.

An Airsoft Electric Gun based on the M4 platform, which offers Zinc/Aluminium externals, microswitch trigger, a quick change spring system and top spec components in one rock-solid package.

Built to a stunning standard, this faithful replica ticks all the boxes. The weapon features a 416 style receiver, hand guard, grip and stock, which all come together to make one beautiful and highly ergonomic Airsoft replica.

The SA-249 MK1 Core is an Electric Gun Replica of the M249 MK1 PARA Light Machinegun, which is made to be as lightweight as possible whilst still being incredibly tough, so that you can run a support role on the skirmish field without absolutely exhausting yourself. If you want an easy to use Airsoft MG, then the lightweight Polymer/Alloy construction, Micro-switchTrigger Unit, Quick Change Spring and Alloy Rotary HOP will be very appealing to you.

If you are into AKs but you ain't no Russian and prefer a western tactical AK or a PMC-style look, the SA-J05 was designed with you in mind! This AK is based on the AK-74 externally but adds a VLTR style stock adapter and an M4 buffer tube to allow for extra comfort, familiarity for M4 users and adjustability to suit any body type or loadout. Construction-wise, this AK has as much steel packed into it as possible, giving you an authentic AK experience with a touch of western comforts in the form of QD sling points and a crane-style slimline stock.

On the inside, the SA-J05 sits alongside the other Specna EDGE™ range AKs, boasting a 6.03mm tightbore inner barrel and Helium™ flat HOP-up rubber housed in an alloy HOP-up unit coupled with the kitted-out Specna Arms ORION™ reinforced version 3 gearbox. As you may have gleaned from the title, the SA-J05 is also equipped with our favourite ETU, the Gate ASTER™ MOSFET, keeping everything running efficiently and allowing for burst mode to be programmed in. If you want a majority steel AK you will never have to worry about upgrading, the SA-J05 would be perfect!

Those of you who prefer to run Li-Ion batteries are looking for a crane stock configuration, Specna has got you covered! This battery has a voltage of 7.4v, a capacity of 1500mAh and a continuous discharge rate of 15C. The battery is comprised of 2 cells connected together, making it an ideal fit for crane stocks, such as M4s, AR36 handguards, buffer tubes and many more battery compartments, thanks to its relatively small size. The battery measures 7x2x2cm per cell and has a cable length of roughly 8cm.

he battery is connected via Deans connector, not to be confused with Mini-Tamiya, however, adaptors are also available. A great all rounder that will fit a huge variety of replicas and battery compartments, just make sure you use a compatible Li-Ion charger!

Specna Arms continue with their CORE series, designed to be an upgraded starter gun, that can be skirmished at a high level right out of the box. With a build that begs to be utilised in CQB skirmishes, it's compact form sports such features such as 20mm RIS handguard, flip up ironsights and suppressor included to keep you ahead of the game and at this price it's a steal!

The SA-H07 is an ultra compact PDW style Airsoft Gun, sporting a retractable PDW stock and a railed front end, the H07 is an excellent option for the player who needs a versatile primary that can handle CQC and medium range engagements. 

Part of the EDGE 2.0 series of rifles this Airsoft AEG features a high quality build and a range of high quality upgrades right out of the box. No need to worry about upgrading the rifle, this gun comes pre-packed with everything you'll ever need. Just pick up the gun and play. You'll struggle to find another Airsoft replica in this price range with the features this replica has.

The Specna Arms SA-46 CORE is an incredibly tough Electric replica of the MK46 Light Machine Gun, which features a lightweight but solid Polymer Receiver, but also has an Alloy Railed Handguard and Steel Bipod which brings the total weight up to 5.5kg. Crammed full of goodies such as a Quick Change Spring System, Electronic Trigger, Rotary HOP Unit and Auto-Winding 2500rnd Box Magazine, this is the ideal choice for someone wanting to lay down the pain.

Specna's iron sights are simple, no frills back up sights constructed from high density polymer, helping keep the weight of your build down for more important, heavy things, like huge freakin' scopes!

Specna's iron sights are simple, no frills back up sights constructed from high density polymer, helping keep the weight of your build down for more important, heavy things, like huge freakin' scopes!

Based off the standard M4A1 used by the US Army and Marines this rifle is a high quality replica built by Specna Arms with high levels of detail, finish, with a top quality wobble free design. If you're looking for a high quality full metal rifle for a beginner weapon you're going to be hard pressed to find anything else in this price range of this quality.

The Specna Arms SA-E25 is another great addition to the EDGE Series line up, and combines a gorgeous, tough Alloy Receiver with Rock River Arms licensed trademarks. Internally, the Gun has convenient features such as Steel Gears, a Quick Change Spring System, GATE X-ASR MOSFET, as well as many top-tier components inside the ORION Gearbox.

Calling all C-clamp operators! Specna arms are presenting a new highly ergonomic Airsoft rifle that you didn't know you needed! Fitted with a super sleek M-LOK handguard and MOE style furniture the Specna SA-V30M was made with the modern operator in mind to provide the most immersive and tacticool Airsoft experience possible.

Those looking for a lightweight beginner rifle with a touch of modernity, the Specna Arms SA-C23 CORE™ would be a great choice. The SA-C23 is fully licensed by real steel Firearms manufacturer, Rock River Arms, and is proudly displaying licenced trademarks on the receiver for a more realistic look, and is constructed predominantly from high density polymer with an alloy outer barrel and CNC machined aluminium M-LOK handguard for the perfect balance between strength and agility. 

On the inside, the SA-C23 matches the other CORE™ AEGs from Specna Arms with its reinforced version 2 gearbox with 8mm bearing bushings, a quick change spring system for easy power tuning and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for above average performance at longer ranges. Equally suited to beginners who need something affordable and effective to get into the sport as it is to veterans looking for something lightweight which shoots great and can still take the accessories their more expensive rifles can, the SA-C23 is a rock-solid choice no matter who is wielding it!

If you have misplaced a screw from your motor cage during upgrading/maintaining your version 3 gearbox, no need to hunt for the perfect screw! This screw set from Specna Arms provides all the screws necessary to attach your motor cage to the gearbox and secure the motor inside the cage.

The SA-A90 from Specna Arms is an electric powered AR-platform Airsoft rifle with a KeyMod and RIS combination handguard, threaded outer barrel and a rear wired solid stock for massive battery capacity.

An absolutely stunning and hefty electric powered Airsoft 6mm replica based on a world-famous Navy Seals favourite. As you would expect from Specna, this replica doesn't compromise on quality, inside or out!

Oh boy....this....this is PEAK AR-15 levels! The firearms industry is ever evolving and Specna Arms are always following right behind and providing us with some the most beautiful Airsoft Rifles and Replicas we've ever seen, and THIS is one of them. This SA-A34 is a slimline, modern and super aesthetically pleasing AR-15 Airsoft gun, finished with stunning bronze features and a 13" M-LOK handguard and it's a dream come true for all you AR-15 fanatics and C-Clampers!

A full Aluminium/Zinc Alloy electric replica of the world's favourite 'Black Bag Operation' Assault Rifle, made famous by Special Forces and Police Units worldwide. Specna Arms, as usual, haven't sacrificed quality at any point in manufacture.

If you need bigger mags on your AK, the Specna Arms S-Mag High-cap is a great shout. The S-Mag is constructed from high-density polymer with unique SA texture on the outside to add traction for improved wet weather handling. This is a wheel-wound high-cap magazine, meaning it holds an absolutely epic 430 BBs and needs to be wound periodically via the winding wheel on the baseplate.

To load the S-Mag High-cap, simply open the fill port on the top of the magazine and pour your BBs in. Once filled, wind the wheel on the baseplate 5-10 times, load it into your AK and get busy. This magazine is ideal for the Specna Arms J-series but should also fit in most other AK AEGs. 

For all you techies out there need of spare parts to work on your AK project this should be on your list. Constructed from aluminium, the motor cage fits version 3 gearboxes and please note that it is specifically for AK platforms. Comes included with various screws for installation.

The SA-H04 is an ultra compact PDW style Airsoft Gun, sporting a retractable PDW stock and a railed front end, the H04 is an excellent option for the player who needs a versatile primary that can handle CQC and medium range engagements. 

An Aluminium, Zinc and Steel constructed Assault Rifle from Specna Arms, featuring their Enter and Convert quick change spring system which lets you quickly change your main spring once the Gearbox is removed from the body.