- Modular Handguard
- GATE X-ASR MOSFET
- Quick Change Spring
An electric powered Edge series replica from Specna Arms, complete with a full Aluminium/Zinc receiver and handguard and a GATE X-ASR MOSFET as standard.
Finance Options
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship all around world, with delivery not only to the UK, but to most of the EU and select Worldwide locations as well. We provide a working day by road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change, and are only a rough guide. For more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£4.95
Approx.
UK Next Day
£6.95
Approx.
Highlands / Islands
£12.99*
Approx.
EU
£12.99+*
Approx.
* Please note that Scottish Highlands, Islands and EU post prices can vary wildly. Prices range from £8.99, up to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The Edge series are a new line of replicas from Specna Arms which combine their usual hardy build-quality on the externals with uprated internals, and a Gate MOSFET as standard to squeeze every drop of performance out of these rifles. The metal parts of the rifle are finished to an amazing standard, and have lovely engraved trademarks. The MOSFET is an X-ASR module from Gate which serves to protect your circuits and batteries, and allows basic troubleshooting on the board thanks to status indicator LEDs. The Edge series also feature an ESA™ quick change spring system which dramatically reduces the amount of time to change the output power of your rifle, allowing you to change the main spring via the Buffer Tube.
The externals are made from a mix of Aluminium and Zinc Alloy which undergo a rigorous course of Sand Blasting, Powder Coating and then Anodising to achieve a world-class finish on their metal-work. This finish is then protected by a 'Nano Coating' finish that reduces scratches. The external trim parts of the rifle such as structural screws and supports are made from Steel to ensure a long-life performance. The Polymers used throughout are an exceptional quality and feel really good in the hands, the Pistol Grip being textured to promote grip in all conditions. The pistol grip has a neat design which allows you quick access to the motor without the need for tools.
At the muzzle end of the replica, the flash hider can be screwed off to reveal a 14mm CCW thread underneath. This lets you attach Suppressors, Tracer Units, Muzzle Brakes or any compatible muzzle device to further enhance the looks or performance of your AEG.
The top of the rifle features a full-length 20mm rail which is ready to take any RIS compatible sights or scopes. The handguard is an URX style modular design which saves on weight by keeping usable rails short and in appropriate positions, giving you the ability to add your own rails as you see fit. It has three short 20mm rails at the front and a full length top rail, and even features QD sling sockets to quickly attach your favourite QD sling setups. The six position Adjustable Stock at the rear is where the battery is housed, and connects to a Deans connector (adaptor included), and you will also notice an Ambidextrous Sling Plate for left and right handed sling users.
The quality continues internally with a wealth of parts which would be considered an 'upgrade' on any other AEG. A rotary Hop Unit gives you fine and precise control over flight path, and being coupled with a precision 6.03mm barrel makes for a very pleasant firing experience. The 'ORION Gearbox' featured inside has a reinforced frame to handle high power springs and is designed around their quick change spring system. Other perks of the ORION Gearbox are: Reinforced Polymer Piston with Steel rack, Aluminium sealed Nozzle, Aluminium double sealed Cylinder Head, Aluminium double sealed Piston Head w/ bearings, Steel Gears and 8mm Bearings. All of this comes together to seal the perfect package for those who want the best of external and internal quality.
Included in the box are two Mid Cap 125rnd Magazines of a modern P-Mag design, which has tiny Specna Arms logos used as a stippling pattern which looks absolutely fantastic! Also included is an ID lanyard, an instruction manual and a certificate of testing from the manufacturer.
Features:
- Part of the Specna Arms Edge Series
- Branded by Rock River Arms, and built based on their designs
- Electric battery powered Airsoft AEG
- Safe, semi, and fully automatic firemodes
- Pre-upgraded with a MOSFET and updated Gearbox
- Pre-installed Specna Arms ORION Gearbox
- Pre-installed GATE X-ASR 4th Generation MOSFET
- Two 125rnd mid-cap spring fed 'S-MAG' magazines included in the box
- Uniqe serial number for each replica
- Rotary Hop-Up chamber for improved range and accuracy
- Easy to adjust Hop-Up unit thanks to the rotary adjustment wheel
- Upgrade 6.03mm Inner Barrel for improved accuracy over standard barrel
- QD Pistol Grip design
- Removable birdcage flash hider
- Modular URX style handguard
- 14mm CCW threaded outer barrel
- 20mm RIS / RAS top rail for sight and scope setups
- QD sling loops on handguard
- Flip up adjustable ironsights
- Flat trigger guard
- Six position adjustable crane stock
- Battery stored in the gun's Stock
- QD sling loop points on the stock
- Rubberised butt plate to prevent slippage
- ESA™ quick change spring system
- Rear ambidextrous sling plate for single point sling setups
- Sand Blasted, Powder Coated, Anodised and Nano Coated
- Rear wired V2 Orion upgraded gearbox
- Reinforced piston with full steel teeth
- Aluminium seal nozzle
- Aluminium double seal cylinder head
- Aluminium double seal piston head
- Spring guide with bearing
- Steel gears for performance and reliability
- 8mm ball bearing
- Quick change spring system
- Mock charging handle which reveals the hop-up unit
- Mock forward assist
- Branded:
- Specna Arms Logo
- SPECNA
- ARMS
- 5.56 MM NATO
- 'P1TR0LB5E'
- 'SPECNA ARMS INDUSTRIES'
Package Includes:
- SA-E06 Edge Carbine
- 2 x 125rnd Mid Cap Magazines
- Deans to Mini Tamiya Adaptor
- Instruction Manual
- Testing Certificate
- ID Lanyard
Special Instructions:
The externals of the replica are metal where they would be on the real world gun. This includes things like the outer barrel, handguard, and receiver. If a real world gun has polymer parts then the gun will still be marked as full metal externals, examples of this would be an M4, where the Stock and Pistol grip are always made from Polymer.
Specification
General
 |
Assault Rifle
|
|---|---|
 |
Yes
|
 |
Yes,
No,
|
 |
Approx. 310fps ± 10%, using 0.20g BB
|
 |
Yes
|
 |
Yes
|
 |
|
 |
Regular Player
|
Weight and Dimension
 |
Approx. 2.6kg
|
|---|---|
 |
75cm
|
 |
83cm
|
Construction
 |
Black,
 |
|---|---|
|
|
Black
|
 |
No
|
 |
Aluminium & Zinc Alloy, Steel & Polymer
|
|
|
Polymer
Alloy
Aluminium
Steel
|
 |
Polymer
Alloy
|
Weapon Specific
 |
Electric
|
|---|---|
 |
None
|
 |
M4 / AR15 / M16
|
 |
STANAG
|
 |
   |
 |
Trigger Lock
|
 |
Right Handed
|
 |
Standard
|
 |
1:1
|
 |
0.25g
|
Hop-Up
 |
Yes
|
|---|---|
 |
Rotary
|
 |
Behind mock bolt plate when charging handle to the rear
|
Furniture
 |
|
|---|---|
 |
20mm RIS / RAS , Modular URX,
|
 |
Sliding
|
|
|
6 Position
|
 |
Iron Sights
|
 |
Buffer Plate , Stock , Handguard ,
|
Barrel
 |
Male
|
|---|---|
 |
CCW (Counter Clockwise)
|
 |
6.03mm
|
Magazine Specific
 |
Medium Capacity , AEG,
|
|---|---|
 |
Approx. 125 Rounds
|
 |
Speed Loader
|
 |
Top
|
Electric Gun Specific Information
Gearbox
|
|
V2 Gearbox
|
|---|---|
 |
Rear Wired
|
 |
Yes
|
Battery Specific
 |
  |
|---|
Suggested Battery
 |
Li-Po
|
|---|---|
 |
Crane
|
 |
7.4v
|
Product Testing Data
 |
310FPS
|
|---|---|
|
|
ASG Blaster 0.20g BBs
|
|
|
07/03/19
|
Need ideas for something extra?
- 3MOA Target Dot
- Alloy Constructed
- High/Low Profile Mount
A robust and reliable Red Dot Sight for Airsoft Guns that have a 20mm Rail System. Supplied with both a High Profile and Low Profile Mount, this Sight features a 3MOA Target Dot with seven Brightness Levels, one of which is dim enough for Night Vision Devices.
- Biodegradable
- Multi-Polish Process
- 1KG Bag of 0.25g BB
Match Grade, biodegradable BBs created for Airsoft Guns and Weapons, created with a Multi-Polish Process to give an excellent finish.
- 30/125 Rnds Selectable
- Lightweight & Tough
- Modern Design
A lightweight Polymer mid-capacity Airsoft magazine for M4/M16 variant rifles, with the neat trick that you can switch between a maximum capacity of 30 or 125 BBs.
- Biodegradable
- 1kg Resealable Bag
- 5.95mm +/- 0.01mm
A 1KG bag containing approximately 4000 high quality biodegradable competition grade Airsoft BBs, constructed from Polylactide (PLA) which degrades in around 60 days, and are polished to provide a smoother aerodynamically enhanced external surface.
- Lightweight & Tough
- 350 Round Capacity
- Ridged & Textured
A lightweight Polymer high capacity wheel wound magazine for Airsoft M4/M16 variants that will be accepted by 99% of M4 based Airsoft weapons.
- Screw Top Lid
- 3300 x 0.25g BBs
- 0.01mm Tolerance
A screw-top bottle that contains 3300 high quality, competition-grade 0.25g BBs from ASG, which are carefully selected to make the cut for the 'Devil' series - a premium range compared to the standard Blasters. They are made with a fine Tolerance of 0.01mm to ensure optimal performance in all Airsoft Guns. The 0.25g BBs are a great option for those playing outdoors, particularly if you have a high speed gun and want to keep overall BB costs down whilst maintaining top-tier performance.
- Hex Pattern
- 140rnd Mid Cap
- Orange Follower
This is a Polymer constructed Magazine for Airsoft M4/M16 Platform Airsoft Guns, that holds a total of 140rnds and has an awesome hex pattern which looks great in any stock or custom gun. The Magazine also features '5.56x45mm NATO' markings for another layer of realism.
Like this Airsoft Gun? Check out these awesome Products!
- £20 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- £10 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- Limited Edition
- 11.1v LiPo Ready
- Microswitch Trigger
A limited edition (3000pcs) evolution of the ever successful ARP-9 series of 9mm AR platform Airsoft Electric Guns, this time with a Crane Stock for extra battery space and a longer rail system for taller users.
- Slide Forward to Open
- Available in Multiple Sizes
- 40mm MOSCART Launcher
Available in multiple sizes these 40mm Under Barrel Mounted Airsoft Grenade Launchers are designed to fire 40mm MOSCART Grenade, and can be attached to the underside of a range of Airsoft Rifles.
- Mechanical Recoil
- 14mm CCW Thread
- KeyMod Handguard
A seriously tough and good-looking AR/M4 platform replica which is powered by electric, features a KeyMod rail system complete with handstop and rail adaptor, and comes packaged with the Bolt Recoil Shock System for a hard-kicking mechanical recoil.
- Textured Grip
- CO2 Compatible
- Square Ironsight
A Gas Blowback Airsoft Pistol built by WE Europe as part of their EU-Series Pistol Range, and is a more compact version of the standard sized EU-Series pistol.
- Low Light Ironsights
- Threaded Outer Barrel
- Integrated Red Dot Sight
From one of the hottest new brands on the scene, VORSK, comes a 4.3 Hi-Capa which offers a realistic Gas Blowback action as well as an Integrated Red Dot Sight, Threaded Outer Barrel, Low Light Ironsights and much more. This is the perfect sidearm for those who love the Hi-Capa platform but want a more compact backup.
- Textured Grip
- Decocking Lever
- Gas Blowback Pistol
A Gas Blowback 6mm BB Airsoft Pistol, based on the Sig Sauer P229 service pistol, used by U.S. Government Forces and more.
- MOSFET System
- POLYMER Version
- KeyMod Rail System
An Airsoft 6mm BB Gun, based on the M4, this is the latest version of the G&G Combat Machine. The weapon is constructed almost entirely from polymer including the Receiver, Stock, Pistol Grip with parts like the Magazine and Stock Tube being alloy.
- Mechanical Recoil
- Included 11.1v LiPo
- Ambidextrous Controls
A highly realistic Airsoft Submachine Gun that has a Full Metal construction, featuring Aluminium, Nylon Fiber and Steel for the externals. The SWAT K features Bolt's Mechanical Recoil System that provides incredible recoil when firing the Gun, powered by an included 11.1v LiPo Battery that sits inside the Foregrip. As an added bonus, the Fire Selector, Magazine Release and Sling Loop are ambidextrous, making this a great choice for Left and Right Handed players.
- Full Alloy Design
- High Quality Finish
- Gas Blowback Pistol
A high quality, faithful, Airsoft 6mm BB replica of the Colt 1911A World War 2 (WWII) .45 ACP Pistol. This highly detailed piece really stands out from the crowd with the satisfying recoil and loud report when it fires.
- M-LOK Compatible
- Dynamic AK Platform
- Multiple Stock Variants
A 6mm BB Airsoft Electric Gun, based on the AK-102, and given a comprehensive overhaul, creating an Operator Platform that is incredibly dynamic.
- Fiberglass Polymer
- 14mm CCW Thread
- KeyMod Handguard
G&G have added yet another masterpiece to their infallible Combat Machine series, which features an 8.5" KeyMod Rail System, 14mm CCW Thread, Flip Up Ironsights and a Sliding Crane Stock for Crane Stock style Batteries.
- Compact CQB Weapon
- Rails for Sights and Accessories
- High Capacity M4 Magazine Adaptor
An Airsoft 6mm Airsoft AEG replica designed to look like the FN P90, produced by FN Herstal in Belgium, supplied with an adaptor to allow the use of m4 magazines including the provided STANAG highcap.
- Strong Recoil
- Tough Externals
- Railed Handguard
A compact M4 platform Airsoft Electric Gun, which is more than capable of performing outdoors as well as in CQB, and is packed with the Bolt Recoil Shock System to provide a solid kick in the shoulder when you fire it.
- Quick Change Spring
- Integrated Suppressor
- 20mm Railed Handguard
An Airsoft electric powered 6mm M4 based replica, with an Alloy 20mm RIS Rail System, rear wired Adjustable Stock, flip up iron sights and an integrated suppressor as standard.
- Folding Stock
- Folding Foregrip
- Railed Hand Guard
An Airsoft 6mm BB Gun, based on the AK47, but with a more tactical and updated look. The weapon is constructed mostly from Alloy, with a Polymer Stock, Pistol Grip, Foregrip and Hand Guard.
- Gas Shotgun
- 3/6 Round Shot
- Detachable Gas Well
A Gas Airsoft 6mm Compact Shotgun, which as a fire mode selection switch allowing you to use either a 3 round shot, or a 6 round shot.