Search results for '11.1v crane'

A triple crane stock 11.1v 1450mAh 25C LiPo, which features a Deans connector instead of the standard small Tamiya.

A super thin, triple cell crane stock styled 11.1v LiPo battery, featuring a small Tamiya connector for easy use.

A high output VP Racing 11.1v 1450mAh LiPo battery, designed to deliver some serious rate of fire and trigger response with the right setup.

An absolutely massive 11.1v LiPo 2600mAh 20c LiPo Battery in a Crane Stock configuration, with three cells which have individual dimensions of: 13.1cm x 1.98cm x 1.13cm. It has a 9cm cable with a Deans Connector on the end.

An Airsoft Gun Battery designed and built by NUPROL specifically for Airsoft Skirmishers and are part of their POWER range of Batteries.

A large 11.1v VP Racing 2600mAh LiPo with a small Tamiya connector designed for a full days Airsoft action with impressive rate of fire and single shot results.

An 11.1v crane stock LiPo Battery with an impressive 2600mAh capacity, designed to ensure that your Airsoft AEG can survive a whole day of Skirmishing.

A Lithium Polymer battery for Airsoft, RC Cars and many other hobbies which comes as a Crane Stock configuration with a Deans connector. This battery is perfect for rear wired Crane Stocks and front wired handguards, and especially AEGs that require an 11.1v battery.

For those of you with some serious power requirements. This large LiPo battery is designed for crane stock use but may also be suitable for larger Airsoft hand guards too. This variant of the battery is fitted with a Deans connector.

An 11.1v 2000mAh Li-Ion battery for Airsoft Electric Guns, which comes supplied in a Crane/Butterfly/Saddle configuration, meaning two rows of cells. This makes them very easy to place in awkard-to-fit spots such as Handguards and Crane Stocks, and will provide better Power Density that traditional LiPo batteries.

If you're running an upgraded or MOSFET-equipped AEG, this Gens Ace 11.1v 25C 1500mAh LiPo Battery may be just what you need to power it. This Lithium Polymer (LiPo) battery is pre-wired to a Deans/T-Plug battery connector and consists of 3 cell groups wired in nun-chuck/crane/butterfly configuration. The wire length between the cells and connector is approximately 8cm and each of the 3 cells measures approximately 0.8 x 1.6 x 13 cm. 

Not all Airsoft AEGs are capable of running an 11.1V LiPo without causing damage, if you are unsure check the recommended battery section of the your gun's product description. LiPo batteries require balance charging, meaning this battery MUST be charged using a LiPo balance charger with the balance port connected. We recommend using a battery charging bag for storage and charging, and to never leave an Airsoft battery on charge while unattended. 

If you're a John Wick fan seeking an Airsoft gun which does the legendary Baba Yaga justice, the EMG Taran Tactical Innovations JW2 M4/AR-15 AEG; Kestrel Basic ETU is the one. This premium-tier AEG boasts full metal construction and CYMA's Platinum E-Edition internals, further refined in this latest version with the addition of the EShooter Kestrel V2 Basic MOSFET/ETU.

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off!

On the outside, we have a 14.5-inch smooth profile outer barrel with a TTI muzzle brake, a CNC machined aluminium KeyMod rail system, the uniquely designed Taran Tactical AR-15 receiver and flawless engraved and laser engraved TTI markings across the design, perfectly replicating the rifle used by the boogie man in John Wick: Chapter 2. If you want to shoot quick and slick like Wick, the EMG Taran Tactical Innovations JW2 M4/AR-15 AEG; Kestrel Basic ETU will equip you to do so!

Those with a taste for the classics and a desire for superb performance straight out of the box; the Novritsch SSR63 A1 is calling your name. This Novritsch AEG is based on the AR36K in its external styling, closely matching the original AR36 rifle issued to UK Armed Police, the German, Spanish, Saudi and Mexican armed forces with a few choice enhancements to elevate it over other AR36 AEGs. On the outside, the SSR63 A1 ticks all the boxes, with fully ambidextrous controls, flawless ergonomics and rock-solid high-density polymer furniture which is both strong and feels fantastic.

On the inside is where things get really interesting! The SSR63 A1 boasts a high torque 24K RPM motor combined with a programmable ETU/MOSFET which offers binary trigger, burst mode, pre-cocking and several other less exciting but equally impressive and essential functions to ensure smooth running reliability in the long-term. The HOP-up unit is CNC machined for extra precision and a flawless air seal and the HOP-up bucking is provided by Maple Leaf and has a flat contact surface to enhance accuracy and range. If you are bored with your M4 and want something a little different that has more than enough performance to contend with the best, the SSR63 A1 is what you need!

The DIPLOMAT: a person who can deal with others in a sensitive and tactful way. Well, we can assure you that there is nothing sensitive about this AEG, but it is certainly tactful! Tactful in the sense that it shows skill when dealing with others or difficult issues... on the battlefield. This short and snappy rifle is loud, proud and better than the rest of the crowd.

It features a pre-installed KX-3 Firepig flash suppressor, a detailed replica of the Noveske NSR-7.5 M-LOK handguard and Noveske Gen.3 upper receiver and plenty of pre-upgraded internal. A CYMA Platinum E-Edition gearbox, complete with a pre-installed Kestrel ETU, 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.02mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades.

Externally, things are par for the course for EMG, with a flawless build with all the authentic details and perfectly replicated Noveske trademarks, available in black, tan or Noveske's unique "Bazooka Green". If you're looking for a short-barrelled AR platform with pre-upgraded internals focused on speed and a flawlessly realistic build, the Gen.3 DIPLOMAT will do the trick!

The DIPLOMAT: a person who can deal with others in a sensitive and tactful way. Well, we can assure you that there is nothing sensitive about this AEG, but it is certainly tactful! Tactful in the sense that it shows skill when dealing with others or difficult issues... on the battlefield. This short and snappy rifle is loud, proud and better than the rest of the crowd.

It features a pre-installed KX-3 Firepig flash suppressor, a detailed replica of the Noveske NSR-7.5 M-LOK handguard and Noveske Gen.3 upper receiver and plenty of pre-upgraded internal. A CYMA Platinum E-Edition gearbox, complete with a pre-installed Kestrel ETU, 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.02mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades.

Externally, things are par for the course for EMG, with a flawless build with all the authentic details and perfectly replicated Noveske trademarks, available in black, tan or Noveske's unique "Bazooka Green". If you're looking for a short-barrelled AR platform with pre-upgraded internals focused on speed and a flawlessly realistic build, the Gen.3 DIPLOMAT will do the trick!

The DIPLOMAT: a person who can deal with others in a sensitive and tactful way. Well, we can assure you that there is nothing sensitive about this AEG, but it is certainly tactful! Tactful in the sense that it shows skill when dealing with others or difficult issues... on the battlefield. This short and snappy rifle is loud, proud and better than the rest of the crowd.

It features a pre-installed KX-3 Firepig flash suppressor, a detailed replica of the Noveske NSR-7.5 M-LOK handguard and Noveske Gen.3 upper receiver and plenty of pre-upgraded internal. A CYMA Platinum E-Edition gearbox, complete with a pre-installed Kestrel ETU, 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.02mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades.

Externally, things are par for the course for EMG, with a flawless build with all the authentic details and perfectly replicated Noveske trademarks, available in black, tan or Noveske's unique "Bazooka Green". If you're looking for a short-barrelled AR platform with pre-upgraded internals focused on speed and a flawlessly realistic build, the Gen.3 DIPLOMAT will do the trick!

If you're looking for a solid, modern M4/AR-15 AEG fitted with some of the best stock internals out there, the CYMA Platinum CM.097A M4/AR-15 AEG; Kestrel Basic ETU is one to watch! The latest version of the original CM.097, this version is equipped with the EShooter Kestrel Basic ETU, the perfect compliment to its thoroughly upgraded Platinum E-Edition internals!

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off! 

On the outside, the CM.097A is very well equipped, ready to host M-LOK or 20mm Picatinny accessories and equipped with a 14mm CCW male threaded outer barrel, ready for your tracer unit or suppressor. If you like the sound of a solid, proven high-performance M4/AR-15 AEG made even better with advanced, programmable firemodes, the CYMA Platinum CM.097A M4/AR-15 AEG; Kestrel Basic ETU will suit you perfectly!

An Airsoft 6mm BB Gun, based on the M4, this is the latest version of the G&G Combat Machine. The weapon is constructed almost entirely from Alloy, featuring an alloy Receiver, Stock Tube, Hand Guard and Barrel, with a Polymer Pistol Grip, Magazine and Stock.

If you're a fan of the real steel firearm scene and love tactical platforms, you must be well aware of the Noveske N4! This Airsoft replica boasts full metal construction and a plethora of pre-upgraded parts from CYMA Platinum, the N4 hits the enemy team where it hurts, with an astonishing trigger response and rate of fire thanks to its E-Edition high-speed internals and MOSFET combination.

To get your rounds out there accurately and consistently, a 6.03mm tightbore inner barrel is installed, coupled with an alloy rotary HOP-up unit for impressive long-range performance, especially for such a compact platform. This 10.5" rifle, is the perfect length for any Airsoft scenario with a performance that can challenge anything else on the skirmish site.

Being an EMG-licenced replica, the N4 Shorty is adorned with flawlessly engraved and laser-engraved Noveske trademarks, making it genuinely hard to tell apart from the real thing. If you want one of the most realistic-looking platforms available on the market, you don't want to miss the EMG Noveske N4 10.5" Gen.3 Shorty .300 BLK AEG Rifle; Kestrel Basic ETU!

Introducing the Bolster Tuned Noveske N4 10.5" Gen.3 Shorty .300 BLK AEG Rifle, a professionally upgraded AEG platform based on the EMG N4 Shorty. Boasting many of the biggest names in aftermarket upgrade parts and put together by the same talented techs that brought you Bolster Armouries, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

The Tuned N4 Shorty builds upon the already impressive base platform and extracts the very best, removing any parts that don't make the cut. Adding in a plethora of low friction, high strength enhancements including an FPS Softair Air Seal Nozzle and Carbon Fibre Reinforced Tappet Plate, Bolster's own EZO bearings, M115 spring and stainless steel sector gear screws, a Laylax Hard Selector plate and the gorgeous Gate Quantum flat blade trigger; this N4 is kitted out to shred anything else it encounters on the field.

The HOP-up has been enhanced with the team's new favourite HOP-up bucking, the 4UANTUM Friction Pro High-Performance HOP-up Bucking, ensuring the N4 meets the Bolster benchmark for accuracy and range. The Gate EON CNC POWER HYBRID Piston Head is also inside, ensuring that consistency is flawless and air efficiency is peak.

The Quantum is paired with the advanced Gate ASTER™ MOSFET, offering 250 different trigger sensitivity settings, pre-cocking, programmable fire controls and much more via the Gate USB link or Gate Control Station app. To deliver the speed it needs to bury the original EMG CYMA Platinum N4 Shorty, the Bolster team saw fit to install the Warhead Base 27K Brushless motor, providing unparalleled heat dispersion qualities and speed to rival the very best.

The highly regarded PTS EPG Pistol Grip has also been added to set the Warhead at the perfect angle, not to mention enhance ergonomics. To reliably handle the raw power provided by the Warhead motor, the team added in Laylax EG 18:1 Hardened Steel Gears, known for their strength and longevity. While the original is impressive, the Bolster Tuned version is the next level up!

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock N4 Shorty to a technician and paid for this amount of work to be done. When we tested the Tuned N4, we were amazed. 347 FPS on the dot with remarkable consistency, 60 m+ effective range and an absolutely scary rate of fire of 25 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you're looking for a full metal DMR-ready AEG with slick styling, the CYMA Platinum CM.097 M4/AR-15 AEG; Kestrel Basic ETU is a fine choice! It's part of the newly revamped CYMA Platinum line and boasts the same reinforced high-speed internals as the original, except now it's even better with the EShooter Kestrel Basic MOSFET added to the mix!

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. It keeps your gearbox cycling at maximum efficiency and with pre-cocking set, you can achieve an incredibly snappy trigger response perfect for rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off!

Even better than the original when it comes to downrange effect while maintaining the superb external quality CYMA Platinum is known for, the CM.097 is a fantastic intermediate option with sleek modern styling and plenty of pre-upgraded parts. If you're ready to take your rifling skills to the next level, the CYMA Platinum CM.097 M4/AR-15 AEG; Kestrel Basic ETU is calling your name!

An Airsoft 6mm BB Gun, based on the AR Platform of Rifles, with a unique Hand guard and Stock System to make it stand out from the crowd.

If you're in search of a full metal MK18 replica with solid build quality and top-tier performance, the EMG CM.105 Daniel Defense MK18 MOD.1 AEG; Kestrel Basic ETU is one of the best options out there! Officially licenced by Daniel Defense via EMG, this full metal AR is rocking full DD trademarks, a superb replica of the RIS II quad rail handguard and CYMA's Platinum E-Edition internals, giving it museum-worthy looks and intense downrange effect.

Inside, you'll find a reinforced V2 gearbox with CNC steel 13:1 high-speed gears, a CNC aluminium ball bearing piston head, a CNC aluminium double O-ring cylinder head, 8mm ball bearing bushings and a high torque neodymium magnet motor. Also present inside is a 6.03mm tightbore inner barrel and alloy rotary HOP-up unit, giving you the range and accuracy to get the job done at long ranges. The pre-installed Kestrel Basic ETU adds some advanced functions into the mix, offering programmable fire modes including a 3-round burst and binary trigger and 6 levels of adjustable pre-cocking; a major improvement over the Zeus MOSFET of the original.

The perfect platform for a US Navy SEAL loadout with a mission-ready feature set with plenty of room for accessories, there are many reasons the MK18 MOD.1 platform is so favoured amongst Airsofters. This, the EMG CM.105 Daniel Defense MK18 MOD.1 AEG; Kestrel Basic ETU is one of the best out there, capable of going toe-to-toe with the best both in the tight confines of CQB and in outdoor environments!

If you always wanted an MPX but you want it to shoot as good as it looks, this is the one to go for! The Bolster Tuned Sig Sauer MPX Upgraded AEG is based on the SigAir MPX but has all the creases ironed out, and is thoroughly upgraded on the inside with some of the best parts in the business.

Inside, you will find the phenomenal Gate TITAN MOSFET making its first appearance in a Bolster Tuned build, providing exceptional trigger response and rate of fire while adding a plethora of customisation options and eliminating the potential of trigger contact corrosion. The TITAN is paired with a Warhead 27K Base Brushless motor for guilt-free full auto mayhem thanks to its low heat build-up and exceptional reliability.

To make the most of the TITAN and Warhead combo, the team added Laylax EG 13:1 High-speed gears, further increasing rate of fire into the realms of the incredible. Laylax gears have a superb reputation amongst techs and were an essential replacement for the stock SigAir gearset. The Laylax Prometheus Purple HOP-up Rubber and Nub makes an appearance, as we might expect, and the usual Bolster Tuned internal polish and expert shimming process has also been carried out, with phenomenal results.

There is more going on with the Bolster Tuned MPX than we can list here (see the Full Description for more details), but check out our YouTube review to see this thing doing its good work. If you've been held back from buying an MPX because you have high standards when it comes to performance, this is the MPX for you!

If you want to ensure victory, you need this. The WELL PRO WE23-Plus Rotary Minigun is part of its "PRO" line of high-end AEGs. This Airsoft Minigun is constructed primarily from high-density polymer to keep the weight manageable, with 5 aluminium outer barrels braced with an aluminium ring at the tip. The Minigun feeds from 2800rnd spring-assisted high-capacity magazines which are wound by the internal motor of the Minigun itself, meaning you can spray and pray without worrying about winding every 3 seconds!

On the inside, Well has equipped this Minigun with the parts it needs to truly dominate the battlefield. The 5 inner barrels are all 6.03mm tight bores, granting a small increase in FPS and improved accuracy potential. The 5 HOP-up units are all independently adjustable, making use of a rotary design for each barrel to apply adjustments. The bearings are 8mm, meaning smooth running and low friction, and the Minigun is also compatible with standard AEG HOP-up buckings and inner barrels, just in case its performance isn't already enough for you!

The Well Minigun has the very real potential to change the game, with an incredible fire rate on an 11.1V LiPo battery and a monstrous 2800rnd magazine that winds itself. Miniguns have been around before, but this one is smaller, lighter and far more affordable than its rivals. If you have wanted a taste of the Minigun life but held off for one reason or another, with the Well Minigun in your hands you will be happy you waited!

An Airsoft Gun Battery designed and built by NUPROL specifically for Airsoft Skirmishers and are part of their POWER range of Batteries. 

If you know real steel and like the NOVESKE aesthetic, you need to check this out! The EMG Noveske 13.7" Gen.3 INFIDEL AEG; Kestrel Basic ETU is a longer version of similar rifles like the DIPLOMAT and is is a perfect replica of the real steel Noveske Infidel Gen.3, a dynamic modern rifle beloved for its style and superior performance.

On the outside, we are treated to a full metal build with flawlessly engraved Noveske trademarks, a detailed replica of the Noveske KX3 Firepig flash suppressor, NSR 9" M-LOK handguard and "Super Badass" charging handle and the iconic Noveske silver outer barrel to add a hint of contrast to this high-end AR build.

Internally, the INFIDEL is equipped with the legendary CYMA Platinum internals, complete with the Kestral Basic ETU, just to top it off. For superior performance, this AEG is equipped with 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.03mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades. It comes straight out of the box laser accurate and lightning fast!

If you have been keeping an eye out for a submachine gun with a modern twist, you can give those peepers a rest, you have found it! Introducing the Double Eagle UTR45, a fresh new SMG with a fresh look, combining the AR15's familiar and comfortable fire controls with SMG.45 style magazines and an advanced multi-position side folding stock. The UTR45 isn't just about those jaw-dropping looks, it also sports the ultra-flexible Double Eagle FALCON fire control system within, together with a 6.1mm "air cushion" inner barrel to provide impressive stability and accuracy.

If you have been keeping an eye out for a submachine gun with a modern twist, you can give those peepers a rest, you have found it! Introducing the Double Eagle UTR45, a fresh new SMG with a fresh look, combining the AR15's familiar and comfortable fire controls with SMG.45 style magazines and an advanced multi-position side folding stock. The UTR45 isn't just about those jaw-dropping looks, it also sports the ultra-flexible Double Eagle FALCON fire control system within, together with a 6.1mm "air cushion" inner barrel to provide impressive stability and accuracy.

A highly realistic and well-weighted Airsoft Electric Gun replica of the M1918A2 BAR (Browning Automatic Rifle), which saw action in World War II and the Korean War as a portable Light Machine Gun.