All Airsoft Assault Rifles

If you're hunting for a super-compact GBBR for close-quarters work, the EMG CGS Daniel Defense DDM4® PDW GBBR should be in your sights! This full metal M4/AR-15 GBBR platform is based on the real steel Daniel Defense DDM4 PDW, a real steel AR "pistol" designed for use in tight quarters and when moving in and out of vehicles. Naturally, this beast is licenced by Daniel Defense, rocking immaculately engraved trademarks across the design, only deviating from the real thing in its inclusion of an actual stock instead of the "pistol stabilising brace" found on the real thing to please the ATF.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you're into GBBR platforms and need something honed for CQB, you can't ask for much better than the EMG CGS Daniel Defense DDM4® PDW GBBR! With a snappy trigger response, above-average rate of fire, fantastic build quality and internals based around the best of the best in the GBBR world, this thing is one to watch in close quarters!

An Airsoft 6mm BB Electric Powered AEG Gun, designed and based off the SIG 550, and was used by the Swiss Armed Forces.

If you prefer shorter AR platforms and want something full metal with a realistic weight, the Delta Armory DA-A13 ALPHA™ 8" M-LOK M4/AR-15 AEG is one of the best options out there. Equipped with an M-LOK handguard constructed from CNC machined aluminium, the unique Delta Armory receiver, an ergonomic pistol grip and a pre-installed aluminium angled foregrip, you have little left to do on the outside other than add your favourite optic!

Inside, we're also remarkably well-equipped! Inside, we have a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, giving you impressive performance and advanced features for a respectable price point. If you like your ARs as cutting edge on the inside as they are on the outside, the Delta Armory DA-A13 ALPHA™ 8" M-LOK M4/AR-15 AEG should suit you perfectly!

This is not an AK, I repeat this is not an AK variant! It may share some silhouette similarities but the VZ.58 is a unique platform that was the standard service rifle for the Slovakian military from 1959 to 1984. This Delta Armory replica is licensed by the Real Steel Firearms company Czech Small Arms which is the only manufacturer of SA VZ.58 rifles. The DA-VZ58 is based on the SA VZ.58 Sporter Carbine except with a longer outer barrel. The trademarks to indicate this can be found on the AEG.

Internally, the Delta Armory DA-VZ58 CSA VZ.58 "Kosa" AEG features some of the high-quality pre-upgraded Delta Armory internals such as an EFCS programmable MOSFET 18:1 ratio steel gears, a quick change spring system, a unique gearbox design and a high torque motor. The EFCS MOSFET allows the fire modes to be reprogrammed for burst modes and semi-auto only using the Ares EFCS programmer (available separately) and also features a low-voltage cutoff function, protecting your battery from being damaged if the voltage drops too low.

If you're in search of a URGI-style AR to complete your loadout, the Specna Arms SA-A34 ONE™ M4/AR-15 AEG; Kestrel Basic ETU is a fine choice. Boasting the top-notch build quality Specna's ONE™ series has become known for, this is the updated version, fitted with the superb EShooter Kestrel Basic ETU/MOSFET. 

The Kestrel Basic offers programmable fire modes including 3 round burst and binary trigger, adjustable pre-cocking with 6 levels to choose from and several quality-of-life functions such as low battery warning and cycle completion. The result is a remarkably snappy trigger when pre-cocking is set, the perfect feature for someone who needs fire supremacy in CQB to get the job done! Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you superb accuracy potential and the latest HOP-up design for M4/AR-15 platforms.

The SA-A34 ONE™ is closely patterned after the real steel MK16 URGI, an enhanced upper receiver designed for US SOCOM and currently serving with US Special Forces of various branches. Equipped with an SMR-style M-LOK handguard, ambidextrous charging handle and SF-style four-prong flash hider, the SA-A34 is just waiting for your choice of accessories to complete the look!

If your next build will be a beast of a DMR, the East Crane EC-903 SR-25 PC DMR AEG; Advanced Edition would make a fine base gun! Mechanically pre-locked to semi-automatic only and equipped with internals ideal for DMR conversion, the EC-903 boasts full metal construction and fantastic attention to detail, inspired by the most recent SR-25 DMR variant, known as the SR-25 PC (Precision Carbine).

On the outside, the EC-903 Advanced is rocking a CNC aluminium URX4-style M-LOK handguard, KAC-inspired QDC flash hider and ambidextrous 20mm Picatinny railed receiver, QD sling sockets throughout the build and an AR-15 AEG spec buffer tube at the rear, pre-fitted with a high quality Crane stock replica. Inside, we're treated to the Version 2 long gearbox, featuring a long polymer piston with a full steel tooth rack, long type 0 cylinder, 18:1 steel gears running on 8mm ball-bearing bushings and a quick change spring guide for easy power tuning. The inner barrel is also a 6.04mm tightbore, offering enhanced accuracy and a slight FPS boost from the same strength spring.

If your DMR build needs to be modern, metal and menacing, the EC-903 SR-25 PC DMR AEG; Advanced Edition from East Crane is the way to go! With the prerequisite .308 style DMR looks to set it apart from standard AR-15s, modern furniture ready to be customised and internals with plenty of pre-upgrades thrown in, the EC-903 is ready to harass the enemy team at long-range!

If you're into modern Russian firearms designs, the WELL PRO WE09 AK-12K Gas Blowback Rifle w/AK-205 Stock will put a big smile on your face! Based on the latest development of the AK-12K, known as the AK-205 by Kalashnikov Concern, this beast marries authentic AK heft with modernised controls and ergonomic furniture, keeping the best bits of the O.G. AK-47 with more accessory options and a manual of arms more comparable to modern, Western rifle designs.

On the inside, the WE09 is based on the superb Tokyo Marui ZET System AKM, meaning aftermarket parts are available for the upgrade fiends and gas efficiency is top notch. Also present is a 6.03mm tight-bore inner barrel, furthering the WE09's efficiency edge and providing superb accuracy, as long as you do your part!

A full metal build with more than its fair share of stamped steel parts, the WE09 AK-12K will definitely please realism fans and its immersive firing experience is something only a GBBR can provide. If you're ready for the challenging but oh-so-rewarding GBBR playstyle, the WELL PRO WE09 AK-12K Gas Blowback Rifle w/AK-205 Stock is ready for you!

If you've got an AEG and are looking for the next step in your Airsoft journey, the WE 4168 Open Bolt GBBR; V3 System is calling your name! A full metal 416 replica which puts realism first, this hefty platform boasts a steel outer barrel and gas block to provide the most immersive experience possible, not to mention its violent recoil and 100% realistic manual of arms. As a training tool or a skirmish primary for realism nuts, the 4168 is at the head of the pack, made even better in its updated V3 iteration!

The most notable redesigns are its steel valve knocker and steel bolt catch contact surface, solving known issues with WE's previous designs and avoiding the immediate need for upgrades or bodge jobs. The trigger group has also been considerably reinforced, but the inner barrel and HOP-up bucking are still GBB/VSR spec, giving you access to some of the best upgrade parts in the business if you want to improve accuracy and range. The stock inner barrel is also now a 6.04mm tightbore, replacing the 6.08mm standard bore barrel of the previous version.

If you're a realism seeker in need of realistic weight distribution, immersive recoil and a top-notch external build, the WE 4168 Open Bolt GBBR; V3 System should be in your sights. The satisfaction of running a "high-difficulty" Airsoft platform and still dominating the battlefield is a feeling which cannot be beaten!

Yet another officially licenced Noveske GBBR from EMG, aren't we lucky! This is the CGS Version of the Noveske 10.5" Gen.3 Shorty 300BLK GBBR, manufactured by CYMA's GBBR wing, known as CGS (CYMA Gas System). Based on the TM ZET System internally but with loads of steel internal parts thrown in, this is one of the best GBBR buys out there currently, and that is unlikely to change!

Being based on a TM design, this thing will shoot like a beast, and on the outside, things are even more spectacular. Boasting licenced Noveske Rifleworks trademarks across the design, full metal construction and flawless attention to detail make the CGS Noveske 10.5" Gen.3 Shorty 300BLK GBBR the ideal primary for any skirmisher who likes the challenge of running a GBBR in game and appreciates the high levels of authenticity and realism EMG provides. Whether this will add to your GBBR collection or you have decided it is time to move up to the most challenging yet rewarding platform in Airsoft, the EMG CGS Noveske 10.5" Gen.3 Shorty 300BLK GBBR will see you well equipped!

Yet another officially licenced Noveske GBBR from EMG, aren't we lucky! This is the CGS Version of the Noveske 10.5" Gen.3 Shorty 300BLK GBBR, manufactured by CYMA's GBBR wing, known as CGS (CYMA Gas System). Based on the TM ZET System internally but with loads of steel internal parts thrown in, this is one of the best GBBR buys out there currently, and that is unlikely to change!

Being based on a TM design, this thing will shoot like a beast, and on the outside, things are even more spectacular. Boasting licenced Noveske Rifleworks trademarks across the design, full metal construction and flawless attention to detail make the CGS Noveske 10.5" Gen.3 Shorty 300BLK GBBR the ideal primary for any skirmisher who likes the challenge of running a GBBR in game and appreciates the high levels of authenticity and realism EMG provides. Whether this will add to your GBBR collection or you have decided it is time to move up to the most challenging yet rewarding platform in Airsoft, the EMG CGS Noveske 10.5" Gen.3 Shorty 300BLK GBBR will see you well equipped!

If you like leading the pack with the latest real steel designs in Airsoft form, the WELL PRO WE09 AK-12 Gas Blowback Rifle w/AK-205 Stock belongs in your collection! A superbly built full metal replica based on a prototype AK-12 rifle known as the AK-205, this is by far the most ergonomic non-Westernised AK we've ever handled and is ready to rock with 20mm Picatinny accessories, meaning none of the usual AK optic mounting headaches!

On the inside, the WE09 is based on the proven Tokyo Marui ZET System AKM, meaning aftermarket parts are available for the upgrade fiends, and gas efficiency is top-notch. Also present is a 6.03mm tight-bore inner barrel, furthering the WE09's efficiency edge and providing superb accuracy, as long as you do your part!

A museum-worthy build with internals based on the most reliable GBBR system around, this AK-12 is ideal for Russian loadouts or any modern firearms fan. If you're ready to step up from AEGs to a GBBR, the WELL PRO WE09 AK-12 Gas Blowback Rifle w/AK-205 Stock is ready for you!

Airsoft JG (Jing Gong) AR36C with a folding stock changes from the perfect close quarter battle weapon to the outdoor firefight, with an airsoft battery and charger the JG AR36C is ready to go out the box and with such a perfect service history you can see why!

Whether you're a new skirmisher seeking a modern primary or an experienced Airsofter seeking a lightweight and reliable backup, the S&T M4/AR-15 SOPMOD Block 3 11.5" AEG; ETU Version is one to watch. This M4/AR-15 AEG platform is made predominantly from high-density polymer with an alloy outer barrel and a mix of alloy and steel trim parts, making it light and strong, ideal for fast-moving skirmishers and those who prefer to fight easy.

On the inside, the S&T Block 3 build features an alloy version 2 gearbox with a modern Rotary HOP-up unit, setting it up to be competitive and upgrade-compatible without overcomplicating things by reinventing the wheel. The inner barrel is also a 6.02mm tightbore example, promising above-average accuracy potential when used with high-quality BBs. This updated version now also features an in-line MOSFET and low-resistance wiring, giving it improved electrical efficiency and a super snappy trigger response in semi-auto.

Equipped with a 20mm Picatinny railed receiver, M-LOK handguard and threaded outer barrel, the S&T Block 3 is ready to be dressed up SF style with tactical flashlights, lasers and suppressors. If you're into the latest real steel builds used by US special forces, you'll love the M4/AR-15 SOPMOD Block 3 11.5" AEG; ETU Version from S&T. It's a liberating experience throwing your rifle around like a real special forces operator without lifting a single dumbbell!

If you like British military rifles, you'll love the Delta Armory DA-C09 CHARLIE™ 10" M-LOK M4/AR-15 AEG! This lightweight, affordable rifle has clearly been inspired by the real steel L403A1/KS-1, the rifle recently issued to the British Royal Marines. This Delta rifle is slightly shorter than that, closely resembling the KS-3, though for the price, it makes the perfect stand-in if you're looking for a modern military loudout.

The DA-C09 is equipped with a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C09 CHARLIE™ 10" M-LOK M4/AR-15 AEG is one to watch!

If you like British military rifles, you'll love the Delta Armory DA-C09 CHARLIE™ 10" M-LOK M4/AR-15 AEG! This lightweight, affordable rifle has clearly been inspired by the real steel L403A1/KS-1, the rifle recently issued to the British Royal Marines. This Delta rifle is slightly shorter than that, closely resembling the KS-3, though for the price, it makes the perfect stand-in if you're looking for a modern military loudout.

The DA-C09 is equipped with a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C09 CHARLIE™ 10" M-LOK M4/AR-15 AEG is one to watch!

If you're a CQB specialist or a fast-moving outdoors skirmisher seeking an M4 platform with a sneaky aesthetic, the Delta Armory DA-A04 ALPHA™ Silent Ops 8 M4/AR-15 AEG is one to watch. Being an AEG of Delta's ALPHA™ line, this beast boasts a CNC aluminium quad-rail handguard, aluminium suppressor and the unique Delta Armory billet-style receiver, giving it a cutting-edge, brutal look with plenty of accessory options built in.

Inside, you will find the usual complement of Delta Armory pre-upgraded internals, including a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness. The 18:1 ratio steel gearset runs on 7mm ball bearing bushings, reducing gearbox noise and friction.

Focussing on long-term reliability, the DA-A04's internals are well suited to new skirmishers or experienced Airsofters looking for a reliable backup or starting point for a custom build. If this sounds like you, the Delta Armory DA-A04 ALPHA™ Silent Ops 8 M4/AR-15 AEG will serve you well!

If you don't like to waste energy lugging a full metal platform around but want high performance, pre-upgraded internals, the Delta Armory CHARLIE™ ETU range was conceived with you in mind. This is the DA-C04-ETU M4/AR-15 KeyMod AEG, based externally on the original DA-C04 but kitted out internally with Delta's APLHA™ ETU internals.

Inside, we are treated to 16:1 ratio CNC steel gears, CNC aluminium cylinder group parts, a 6.03mm tightbore inner barrel with a high torque Neodymium magnet motor to top it off. The Delta Armory programmable ETU/MOSFET system is also present, offering super snappy trigger response, improved rate of fire and the ability to program the fire controls for burst mode and binary trigger. Whether you're new to skirmishing and want a pre-upgraded platform that can tangle with the best, or you're a veteran who likes to fight easy, the DA-C04-ETU CHARLIE™ M4/AR-15 KeyMod AEG is the ideal addition to your Airsoft armoury!

If you're a fan of cutting-edge firearms designs from the 1990s (the best decade), you'll be into this one! The EG6 Old School New Cool Primary Pack pairs the Evolution AR36C AEG with the Guerilla Tactical COMP M2 Style Red Dot Sight, a LiPo battery, LiPo Balance charger and safe charging bag. Also included is a lens protector to keep your Red Dot Sight safe from incoming fire and an 8Fields Tactical Simple Rifle Case for transportation and storage.

An often overlooked platform with plenty of ergonomic perks, the AR36C boasts ambidextrous controls, a side folding stock and plenty of rail space for accessories. Pick up some BBs and eye protection, and you're ready to rock with this beast!

If you want the gucci look but you don't want to part with those gucci bucks, Double Bell has something you may like! The BY-817 M-416 A5 AEG is styled to match a certain real-world rifle we all know and love and boasts full metal construction, fantastic attention to detail and pre-upgraded internals including a 6.03mm tightbore inner barrel, reinforced steel gears and a quick change spring system for easy power tuning.

As with the latest iteration of the real rifle, the Double Bell AEG is also rocking a full set of ambidextrous controls, making this a fantastic platform for left-handed shooters and those who use shoulder-to-shoulder transitions to make the best use of surrounding cover. Whether you run a special forces loadout or you are looking for a lefty-friendly AR platform with an elite look, the Double Bell M-416 A5 should suit you perfectly!

If you're looking for a mid-length AK with the robust and realistic feel of steel, the Evolution Airsoft E-104 would be a great choice. As part of Evolution Airsoft's "Hard Core" range, this AK sports full metal construction with a large proportion of steel in its build, an alloy adjustable HOP-up unit and a well-equipped version 3 gearbox bristling with upgraded parts. 

The E-104 replicates the real steel AK-104/105 with its 12-inch barrel and comes with a side folding skeleton stock, meaning you can shorten the rifle easily for carry or close-quarters work. For an AK that can do it all, you cannot go wrong with the E-104!

Attention all sneaky skirmishers! The Specna Arms SA-A07 ONE™ M4/AR-15 AEG; Kestrel Basic ETU is exactly what you are looking for, with its integral suppressor, it really doesn't get more covert than this. This platform also boasts full metal construction, making it hardwearing and sure to last in even the roughest of skirmishing conditions.

Inside the Specna Arms SA-A07 ONE™, there are some incredible straight-out-of-the-box internals. It features a Kestrel Basic ETU, 18:1 ratio steel gears running on 8mm ball bearing bushings and a reinforced gearbox shell with an Enter & Convert™ quick change spring guide. This allows you to change the spring without having to open the gearbox itself. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, getting you off the mark with above-average accuracy potential and a slight FPS boost.

If you are in the market for a 7.62x51 style AEG but you want something unique, the EC-909 LR OBR is calling your name! This AEG boasts full metal construction with an absolutely gorgeous matt black anodised finish applied and is set up out of the box for DMR duty thanks to its quick change spring system, in-line MOSFET and semi-auto locked fire controls. 

On the inside, we are treated to more than our fair share of pre-upgraded internals, especially at this price! A 6.04mm tightbore inner barrel coupled with a TM-compatible rotary HOP-up unit gives the EC-909 the range and accuracy to duke it out with the best. The steel gearset runs on 8mm ball bearing bushings to reduce stress on the gearbox shell and reduce friction, allowing for higher power springs to be installed while remaining within the parameters set by the manufacturer. The gearbox is a version 2 long (sometimes known as version 2.5), meaning greater cylinder volume which is ideal for longer inner barrels. If you want a DMR that looks like nothing else you can buy or build yourself, the EC-909 is the one!

If American AKs are your thing, this one is definitely for you! The EMG Rifle Dynamics RD-704P AEG; Kestrel Basic ETU is packed full of pre-upgraded internal parts and features genuine trademarks from firearm company Rifle Dynamics. If you have shot a CYMA Platinum Edition rifle before, you can imagine how absolutely devasting in-game this rifle will be. To make matters sweeter, it is equipped with an internal tracer unit mounted to the HOP-up and powered by the AEG's battery.

The tracer HOP-up is a rare addition to stock Airsoft rifles, usually a rare innovation only found on the aftermarket and requiring a certain amount of expertise to wire in. An impressive feature made even better in combination with this RD-704P's other upgraded parts and flawless build quality. The RD-704P boasts full metal construction with a large proportion of steel in the build, a 6.03mm tightbore inner barrel, a high-speed Neodymium magnet motor and much, much more!

So, if you're in the mood for an AK platform, the EMG Rifle Dynamics RD-704P AEG is a great high-performance option, plus, it has the added bonus of lighting up tracer BBs without an aftermarket tracer unit required!

If you have a thing for modernised AKs, you'll love this! The CYMA Platinum SLR Airsoft Works AK-105 AEG is absolutely packed with pre-upgraded parts and is officially licenced by SLR Rifleworks with detailed replicas of SLR parts across the design. This modernised AK-105 is equipped with an internal tracer unit mounted to the HOP-up and powered by the AEG's battery. This means you can light the enemy up with tracer BBs without adding any extra length or weight to your gun, adding in a rare innovation usually only found on the aftermarket and requiring a certain amount of expertise to wire in. Inside the V3 gearbox, it gets even better!

With pre-installed 13:1 high speed CNC steel gears, a CNC aluminium piston head and cylinder head, a high torque Neodymium magnet motor and a 6.03mm tightbore inner barrel, there is practically nothing left to upgrade on this beast! Also inside this, the latest version of the SLR AK-105 we are treated to the EShooter Kestrel Basic ETU, offering 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. Make no mistake, this beast is even more kitted out than the previous version!

If you held off on the original SLR AK-105 from CYMA, the EShooter Kestrel Basic ETU version will make you glad you waited! Retaining all the best bits of the original but with advanced functionality added, the CYMA Platinum SLR Airsoft Works AK-105 AEG; Kestrel Basic ETU is a real killer on the field!

Finally an L85 replica with the performance you would expect of a modern Airsoft weapon. G&G have given the L85A2 their ETU and MOSFET treatment which lets you use 11.1v batteries, meaning a crazy high rate of fire, easy trigger pull and an Earth-shaking piston-driven blowback to top it all off!

If you like thunderous recoil and maximum realism, you'll love the WE AKS-74U GBBR! This full metal beast is built with a high proportion of steel and is one of the hardest recoiling GBBRs out there, thanks to its hefty full-sized bolt carrier complete with a detailed mock long stroke piston system. WE has really gone the extra mile when it comes to realism; pop open the hinged top cover and you'd be hard pressed to tell this apart from a real AK!

In terms of realism, this AK is hard to beat, feeding from 30-round real-cap magazines which provide both a "dry-fire" mode and a more realistic "stop firing on empty" mode, giving you the dead man's click when it's time to reload, just like a real AK. Internally, this updated WE AKS-74U also features a 6.04mm tightbore inner barrel, providing an advantage in accuracy and a slight increase in FPS from the same power gas, though it shares internal parts with the previous generation and is ready for aftermarket upgrades.

If you're expanding your GBBR arsenal and need to fill an AK-shaped hole, the WE AKS-74U GBBR is one to watch. A fantastic replica, both inside and out, with frightening recoil force and a genuinely intense firing experience, this "Krinkov" is a violent little menace!

If you seek the immersive firing experience and challenging playstyle of a GBBR, the EMG CGS Daniel Defense DDM4® PDW SBR GBBR is worthy of your attention! This compact full metal PDW style AR boasts official licensing from Daniel Defense and full DD trademarks across the design, with awesome replicas of DD's latest furniture and controls.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you plan to use a GBBR in CQB skirmishes, this is probably the best option out there right now without spending thousands and building it yourself. Licenced trademarks, a full metal build packed with steel internal parts with a 6.03mm tightbore to top it off, you won't find another out-of-the-box GBBR with a full-size rifle style bolt as fast as this!

If you seek the immersive firing experience and challenging playstyle of a GBBR, the EMG CGS Daniel Defense DDM4® PDW SBR GBBR is worthy of your attention! This compact full metal PDW style AR boasts official licensing from Daniel Defense and full DD trademarks across the design, with awesome replicas of DD's latest furniture and controls.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you plan to use a GBBR in CQB skirmishes, this is probably the best option out there right now without spending thousands and building it yourself. Licenced trademarks, a full metal build packed with steel internal parts with a 6.03mm tightbore to top it off, you won't find another out-of-the-box GBBR with a full-size rifle style bolt as fast as this!

Need the MK18 look in a lightweight, cost-effective package? The EMG Daniel Defense® MK18 MOD.1 Sports Line AEG; ETU Version has your name on it! Constructed predominantly from high-density polymer with an alloy outer barrel and a mix of alloy and steel trim parts, this detailed MK18 MOD.1 replica is licensed by Daniel Defense via EMG, providing authentic trademarks to complete the realistic look.

On the inside, the EMG MK18 Sports Line features an alloy version 2 gearbox with a modern Rotary HOP-up unit, setting it up to be competitive and upgrade-compatible without overcomplicating things by reinventing the wheel. The inner barrel is also a 6.02mm tightbore example, promising above-average accuracy potential when used with high-quality BBs. Also present is an in-line MOSFET and low-resistance wiring, giving it impressive electrical efficiency, which translates to a super snappy trigger response in semi-auto.

If a MK18 will be your next buy but you're on a tight budget or want to keep your in-game agility, this is the one to go for. Packing licensed trademarks, rock-solid externals, TM-compatible internals and some potent internal parts straight out of the box, you won't find a better MK18 than the EMG Daniel Defense® MK18 MOD.1 Sports Line AEG; ETU Version in this price range!

If you're an AK kinda guy but want to stay light on your feet, the Specna Arms SA-J73 CORE™ HAL¹ ETU AK-105 AEG is your ideal primary! A revamped version of the original SA-J73, the HAL¹ ETU version keeps the best bits and adds some innovative new parts into the mix, with the HAL¹ programmable MOSFET taking centre stage.

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Also added to the updated SA-J73 is a new rotary AK HOP-up unit design, bringing rotary performance to the table to keep pace with ARs! Like the original SA-J73, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

If you're an operator on a budget and need an agile AK with advanced internals, the SA-J73 is exactly that. Rock solid despite its polymer build and kitted out on the inside with goodies you'd never expect at this price, you're in good hands on the field with the Specna Arms SA-J73 CORE™ HAL¹ ETU AK-105 AEG at your side!