Airsoft Electric Submachine Guns

If your primary weighs a ton and you are looking for a lightweight alternative, the Specna Arms SA-FX01 is the ideal choice. This AR-9 style AEG is constructed from Spenca's fantastic high density polymer and is rocking the same internals as the established FLEX™ series, allowing it to tip the scales at a minuscule 1.8kg without compromising on in game performance or aesthetics.

The SA-FX01 is equipped with an M-LOK handguard featuring QD sling sockets straight out of the box, giving you a modern front end with wide accessory compatibility and a slick, cutting-edge look. The receiver is patterned after real steel "billet" AR receivers, blending perfectly with the M-LOK handguard while offering plenty of space to easily mount a scope or red dot sight for better effect on target. On the inside, things are equally impressive. A 6.03mm tightbore inner barrel provides the accuracy needed to send the enemy back to respawn, and a modern rotary HOP-up unit allows you to extend your range and tune for different ammo weights.

Whether you are fresh to Airsoft skirmishing or a veteran looking for a lightweight primary weapon option for enhanced mobility, the SA-FX01 brings full-fat AEG performance to the table with only slightly more mass than a beachball!

If your primary weighs a ton and you are looking for a lightweight alternative, the Specna Arms SA-FX01 is the ideal choice. This AR-9 style AEG is constructed from Spenca's fantastic high density polymer and is rocking the same internals as the established FLEX™ series, allowing it to tip the scales at a minuscule 1.8kg without compromising on in game performance or aesthetics.

The SA-FX01 is equipped with an M-LOK handguard featuring QD sling sockets straight out of the box, giving you a modern front end with wide accessory compatibility and a slick, cutting-edge look. The receiver is patterned after real steel "billet" AR receivers, blending perfectly with the M-LOK handguard while offering plenty of space to easily mount a scope or red dot sight for better effect on target. On the inside, things are equally impressive. A 6.03mm tightbore inner barrel provides the accuracy needed to send the enemy back to respawn, and a modern rotary HOP-up unit allows you to extend your range and tune for different ammo weights.

Whether you are fresh to Airsoft skirmishing or a veteran looking for a lightweight primary weapon option for enhanced mobility, the SA-FX01 brings full-fat AEG performance to the table with only slightly more mass than a beachball!

If you have got your eye on an AR-9, Lancer Tactical just made the choice that bit harder! The LT-35 Battle X 9mm PDW is intended to be a lightweight platform for aggressive run and gun playstyles and is equipped with Lancer's Gen.2 internals, including a high torque motor, 6.03mm tightbore inner barrel and a well equipped version 2 gearbox with some choice reinforced parts.

The LT-35 is constructed almost entirely from high density nylon polymer, making it as solid as a rock and as light as a feather; a sure choice for any skirmisher who likes to move fast with minimal baggage. Its modern external design wants for nothing in the realm of accessorising, offering a railed receiver, M-LOK handguard and 14mm CCW male threaded barrel, meaning options are endless when it comes to kitting the Battle X out. The ARP9 looks worried!

An Airsoft Electric Pistol replica of the MAC-10 Sub Machine Gun, which comes included with a Battery & EU Pin Charger, as well as the proprietary suppressor which this SMG is rarely seen without.

If you like the compact form of the SMG5K but are a 21st-century Airsoft combatant and you require ultra-modern features to complete your mission, the CM.041L was designed with you in mind. This AEG takes the already impressive full metal CM.041K platform and adds an M-LOK handguard, M-LOK 20mm Picatinny hybrid optics rail and an ambidextrous magazine release which can be actuated using the trigger finger from a firing grip for a smooth and fast emergency reload. On the inside this AEG has the Platinum high speed upgrade treatment, boasting a high speed motor, high speed gear set and an ETU/MOSFET pre-installed for a spectacular rate of fire and trigger response. Also inside you'll find a tight bore inner barrel for extra accuracy from this compact AEG submachine gun.

Featuring an integrated suppressor and collapsible stock, this is for all you stealthy spec ops players out there.

Perfect for a starter Close Quarters Battle thanks to it's compact size, it features everything you need to get into some action, such as adjustable Hop-up, rotary drum design sights and lightweight design, so you can move from objective to objective with ease, quietly picking off targets on the way.

The ASG Scorpion EVO 3 A1 is designed from the official specs of the real steel CZ Scorpion Evo Carbine created by Česká zbrojovka Uherský Brod, then built from the ground up for Airsoft By ActionSportsGames in Denmark. 

This edition of the Scorpion EVO is the 2020 revision of the original EVO featuring upgraded, rebuilt and more streamlined parts for better operation and more compatibility with aftermarket extras for those who like to upgrade. If you have a military-style EVO build planned, this is the version you need to spoof the EVOs issued to Canadian, Ukrainian and Czech soldiers!

An Electric Powered SMG-5 replica with a High Cycle Gearbox, which can output 6mm BBs at a muzzle velocity of 325FPS, at a Rate of Fire of over 1000RPM. Built to a very solid standard, this Full Metal replica weighs a surprising amount which makes it feel very realistic in the hands. If you love the SMG-5 shape, but have been put off by the poor performance of previous models, then the CYMA CM.041J High Speed will definitely appeal to you.

Introducing the Kriss Vector, one of the most iconic submachine gun designs of recent years. The Vector has made itself known in many video games and thanks to Krytac, we now have a world-beating AEG replica version of this innovative real steel platform!

Boasting pre-upgraded Krytac internals with their in-line MOSFET to keep everything in check, the Krytac Vector is the ultimate replica of the Kriss Vector, complete with ambidextrous controls, 2 round burst mode and a high quality fibre reinforced polymer body with steel and alloy parts where needed to maintain strength. If you want a modern SMG with an iconic yet ultra-modern aesthetic you cannot beat the Krytac Kriss Vector! 

Looking for a sneaky SMG? The CYMA CM.041 SD6 is a full metal version of the sneaky SMG-5 we all know and love which has been upgraded with CYMA's BLUE Edition internals, making it as rock solid on the inside as it is externally. All of the internal upgrades are focused on reduced friction and lower stress, meaning the BLUE Edition CM.041 SD6 should provide a lifetime of superb performance and is fully compatible with aftermarket upgrades for those who want a bit more. As it comes, the rate of fire and trigger response is spectacular for an AEG without a MOSFET and is a significant step up from other SMG-5 SD6 AEGs on the market. 

The real-world version of this submachine gun has been used by US Navy SEALs and UKSF in various special applications and has an iconic look which simply cannot be imitated, as much as the M4 platform tries to (Honey badger *cough*). If you want an SMG which is milsim appropriate with a plethora of internal enhancements built right in, the CM.041 SD6 would be a great tool for the task.

Amidst the endless droves of pistol calibre carbines and SMGs currently being released, G&G present the MXC-9 to reassert its dominance in the field of CQB Airsoft platforms. The MXC-9 is constructed from high density polymer with a CNC machined aluminium handguard, and makes use of G&G’s superb G2 gearbox, complete with programmable fire controls allowing for 3 round burst.

In the looks department, the MXC-9  is largely based on G&G’s PCC45, and is even compatible with PCC45 magazines, but blends the receiver style of the PCC45 with a shorter handguard, sound amplifying muzzle device and a newly designed multi-position folding stock. Consider this the lovechild of the MCX and PCC45, with the frightening performance of the ARP-9 and SSG-1’s G2 gearbox!

There has been a lot of fuss made about this particular AEG online, and let us tell you, the hype is real! The Krytac P90 AEG combines the P90s radical design with Krytac's industry expertise to produce the best performing P90 out there, with an unrivalled feature set and bomb-proof internals.

A brilliant and affordable alloy construction 6mm BB Airsoft replica suppressed SMG-5, with solid polymer stock. The suppressor actually reduces the noise of the AEG when it fires!

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The CM.041 SMG-5 Patrol Base X Gate ASTER Upgraded Edition has been put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series, and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work, with the unique insight only a Bolster Armouries technician can provide.

The first thing the Bolster Armouries team do with the CM.041 is to tear it to pieces and build it back up to fulfil its true potential; replacing the basic CYMA ETU with the space-aged Gate ASTER ETU, modifying the HOP-up for better air seal and setting retention, and dropping in a Lonex Air Seal nozzle and Prometheus Purple HOP-up rubber. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER ETU. The cylinder windows have been radiused to increase the strength of the shell to withstand the force of repeated piston impacts, and the bearing holes in the gearbox shell have been smoothed out. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard. When we tested this AEG we were flabbergasted. 330 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 25 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The CM.041 SMG-5 Patrol Base X Gate ASTER Upgraded Edition has been put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series, and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work, with the unique insight only a Bolster Armouries technician can provide.

The first thing the Bolster Armouries team do with the CM.041 is to tear it to pieces and build it back up to fulfil its true potential; replacing the basic CYMA ETU with the space-aged Gate ASTER ETU, modifying the HOP-up for better air seal and setting retention, and dropping in a Lonex Air Seal nozzle and Prometheus Purple HOP-up rubber. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER ETU. The cylinder windows have been radiused to increase the strength of the shell to withstand the force of repeated piston impacts, and the bearing holes in the gearbox shell have been smoothed out. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard. When we tested this AEG we were flabbergasted. 330 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 25 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you are looking for an SMG but you have experience with the M4/AR-15, an AR-9 platform would suit you perfectly. The Zion Arms PW9 MOD.1 follows the AR-9 design format but is constructed with a CNC 7075 T6 aluminium receiver and handguard making it lighter than a beachball while maintaining superb strength. Unlike many other Airsoft AR-9 SMGs, the PW9 is based on a real steel design, the R&D Precision PW9, and boasts licenced trademarks on its handguard as a homage to the real thing.

The story only gets sweeter when it comes to internals! Inside the PW9 we are treated to a polished 6.03mm tightbore inner barrel, rotary HOP-up unit, a quick change ball bearing spring guide, 19K RPM high-speed motor and the Zion Arms Nebula ETU to top it all off. The Nebula allows you to program the trigger for burst modes of different durations and also improves trigger response and rate of fire by reducing electrical resistance. If you have a mobile playstyle and appreciate a high speed SMG with phenomenal build quality you will definitely appreciate the Zion Arms PW9!

If you are looking for an SMG but you have experience with the M4/AR-15, an AR-9 platform would suit you perfectly. The Zion Arms PW9 MOD.1 follows the AR-9 design format but is constructed with a CNC 7075 T6 aluminium receiver and handguard making it lighter than a beachball while maintaining superb strength. Unlike many other Airsoft AR-9 SMGs, the PW9 is based on a real steel design, the R&D Precision PW9, and boasts licenced trademarks on its handguard as a homage to the real thing.

The story only gets sweeter when it comes to internals! Inside the PW9 we are treated to a polished 6.03mm tightbore inner barrel, rotary HOP-up unit, a quick change ball bearing spring guide, 19K RPM high-speed motor and the Zion Arms Nebula ETU to top it all off. The Nebula allows you to program the trigger for burst modes of different durations and also improves trigger response and rate of fire by reducing electrical resistance. If you have a mobile playstyle and appreciate a high speed SMG with phenomenal build quality you will definitely appreciate the Zion Arms PW9!

This Airsoft 6mm electric powered SMG-5 is an Alloy and Polymer constructed replica of the traditional SMG-5 layout, favoured by Airsofters doing SAS/Police loadouts.

The Thompson M1A1 is a World War Classic Sub Machine Gun, however, it found its spotlight within darkened back alleys of a Mafia-Run New York City and was catapulted into infamy as the go-to gun for Gangsters and Lawmen during the 1920s due to it's large magazine capacity and high rate of fire. The CM.033 Does an excellent job of preserving the traditional aesthetics of the M1A1, featuring an alloy body and faux wood furniture, the 0.33 is a must-have for any classic Mafia fanatic.

It's the submachine gun that can be fired from a brief case! At just 33cm long, the CM.041J is a replica Airsoft gun which blurs the lines between Submachine gun and Machine Pistol.

The PPSH by Snow Wolf represents an important piece of Russian history, and is an authentic replica featuring a realistic Electronic Blowback that rattles the Bolt/Charging Handle as you burn through the included Drum Magazine. Whether you're wanting to do a historical loadout, or you want a fun-to-use Submachine Gun which is happy operating in any environment, then the Snow Wolf PPSH is perfect.

The PPSH by Snow Wolf represents an important piece of Russian history, and is an authentic replica featuring a realistic Electronic Blowback that rattles the Bolt/Charging Handle as you burn through the included Drum Magazine. Whether you're wanting to do a historical loadout, or you want a fun-to-use Submachine Gun which is happy operating in any environment, then the Snow Wolf PPSH is perfect.

The PPSH by Snow Wolf represents an important piece of Russian history, and is an authentic replica featuring a realistic Electronic Blowback that rattles the Bolt/Charging Handle as you burn through the included Drum Magazine. Whether you're wanting to do a historical loadout, or you want a fun-to-use Submachine Gun which is happy operating in any environment, then the Snow Wolf PPSH is perfect.

The Thompson M1A1 is a historic World War sub-machine gun, however, it mostly rose to fame in the darkened back alleys of a Mafia-run New York City and was catapulted into infamy as the go-to gun for gangsters and lawmen during the 1920s due to its large magazine capacity and high rate of fire.

The Snow Wolf Thompson M1A1 does an excellent job of preserving the traditional aesthetics of the M1A1, featuring an alloy body and faux wood furniture, the 0.33 is a must-have for any classic Mafia fanatic.

The Thompson M1A1 is a historic World War sub-machine gun, however, it mostly rose to fame in the darkened back alleys of a Mafia-run New York City and was catapulted into infamy as the go-to gun for gangsters and lawmen during the 1920s due to its large magazine capacity and high rate of fire.

The Snow Wolf Thompson M1A1 does an excellent job of preserving the traditional aesthetics of the M1A1, featuring an alloy body and faux wood furniture, the 0.33 is a must-have for any classic Mafia fanatic.

Old school is cool again! The venerable PPSH-41 was created by the Soviets as the first line of defence against the Germans in WW2. S&T have lovingly recreated a piece of history with Real Wood furniture, stamped Steel construction and electric blowback to top it all off. Did we mention the included 2000rnd drum magazine?

An Airsoft 6mm BB firing electric AEG designed in the style of the MP5 used by Special Forces around the world. Featuring a lightweight and durable Polymer external construction, this a RIF for those who like to stay light and fast on their feet.

We have been waiting for this one! The Bolster Armouries team have finally caved in to numerous staff requests for a sneaky counterpart to the Patrol Base X Gate ASTER upgraded SMG-5 AEGs. Enter the CM.041 SD6 SMG-5 Patrol Base X Gate ASTER Upgraded Edition; a full metal SMG-5 SD6 built by the same team behind the ultra-high-end Bolster Armouries ONYX AEG series and the previous Patrol Base X Gate ASTER SMG-5 AEGs. 

As with its less discrete brethren, the first thing the Bolster Armouries team do with the CM.041 SD6 is to tear it to pieces and built it back up to fulfil its true potential; installing the space-aged Gate ASTER ETU, modifying the HOP-up for better air seal and setting retention, and dropping in a Lonex Air Seal nozzle and Prometheus Purple HOP-up rubber.

A lot of work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER ETU. The cylinder windows have been radiused to increase the strength of the shell to withstand the force of repeated piston impacts, and the bearing holes in the gearbox shell have been smoothed out. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 SD6 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard. When we tested this AEG we were flabbergasted. 347 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 25 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you are a big fan of the SMG-5K but want to reach out and contend with the bigger AEGs, the Bolster Tuned CYMA CM.041L SMG-5K is the only one that can do it! This Upgraded AEG has been built and tuned by the expert technicians at Bolster Armouries and features the incredible Gate ASTER MOSFET, Prometheus Purple HOP-up rubber and nub, an extended 260mm 6.03mm tightbore inner barrel and an enhanced Type C cylinder from FPS Softair.

Not content with simply dropping parts in, the Bolster team has carried out a professional shim job, a complete gearbox rebuild, reapplication of high quality lubricants and a HOP-up unit modification to maximise efficiency and consistency. The result of this extensive tuning and parts replacements is an AEG we can confidently say will hit out to 60m + accurately with 0.28g BBs and rip off rounds at an astonishing 25 rounds per second with an 11.1V LiPo battery.

As with other Bolster Tuned/Patrol Base Custom platforms, if this high benchmark for performance is not met, the AEG goes back to the workbench for more work and won't be sold until it meets the teams' lofty standards. If you like the idea of using a tiny AEG and outranging all the big boys, the Bolster Tuned CYMA CM.041L SMG-5K Upgraded AEG is what you need to get the job done!

The tactical option for MP5 lovers far and wide; whether you want to attach the included foregrip or your own optics, torches, lasers this Airsoft 6mm electric powered replica has you covered.