Airsoft Pistol Magazines

If you need mags for your KJ Works or ASG MK1 or MK2 pistol these will do the trick! The KJ Works 16rnd Green Gas Magazine for MK1 NBB pistol is constructed from alloy with a steel feed spring, polymer follower and brass fill valve. The mag can be loaded either by hand with the help of the drag-down follower or using a speed loader through the feed lips on the top front of the mag, and the fill valve is located on the baseplate.

As with any GBB or NBB green gas magazine, the mag and gas can will need to be inverted to fill properly. Whether you run the MK1 or the MK2 platform, these magazines will fit and feed just fine and can also be an easy way to reduce the FPS for more site-friendly performance when it comes to the intensely powerful CO2-fueled MK2 pistol!

A Green Gas, 25 round magazine for the UMAREX Heckler & Koch USP .45 GBB Pistol.

A 20 Round Green Gas Powered Magazine designed for the GLOCK 19 Gen4 by UMAREX.

An Alloy constructed Gas Powered magazine for the SRC branded TT-33 replica (SR-33). It holds a total of 11rnds and is filled from the bottom with Green Gas via the Inlet Valve. The follower is easy to pull down from the side, and it can be easily loaded by hand or using a Speedloader. Be careful not to let the follower spring up otherwise the feedlips could be damaged.

A CO2 magazine designed for the WE EU-Series pistols, allowing you to make the move from Green Gas to CO2. The magazine is robust and gives excellent power for every shot, built from Alloy the magazine comes with a steel screw in base for extra durability. 

A spare or replacement Gas Magazine for the WE branded EU17 series Pistols. It is designed for the GEN 5 iteration of the EU17 but will function with GEN 3 and GEN 4 Pistols as well. It holds a total of 25rnds and can be filled with a Speedloader from the top or bottom.

A 22 round Green Gas / Inlet Valve Magazine for the UMAREX Glock 45 Gas Blowback Pistol, featuring a top of the range build quality & official Glock trades. 

This is a Spare Magazine for the G&G Armament Piranha Gas Blowback Airsoft Pistol, constructed from tough Alloy to the original specification. It is filled with BBs using a Speedloader and has Gas inserted from the baseplate via the Inlet Valve. If you own a G&G Piranha Pistol, then Spare Magazines are an absolute must for staying in the field longer, rather than scurrying back to the Safe Zone to reload.

If you're looking for spare mags for your Golden Eagle Hi-capa, here they are! The 25rnd Green Gas Magazine for Hi-capa GBB is constructed from alloy with brass valves, rubber o-rings, a steel feed spring and a polymer baseplate and is a green gas magazine. The mag can be filled using the fill valve on the base plate and is loaded with BBs either through the feed lips at the top of the mag or by pulling the follower down and loading BBs in through the front.

This magazine is compatible with the Golden Eagle Hi-capa series but is patterned after the TM design so should also be compatible with other Hi-capa platforms as long as they use the Tokyo Marui internal system.

A replacement Airsoft gas magazine for the WE Europe Browning Hi-Power. The magazine is constructed from Alloy, with Alloy feed lips and base. The magazine has a 20 round capacity.

A gas blowback Airsoft 6mm BB gun magazine designed for WE Europe's F228 series and F229 series pistols. A perfect spare to increase your trigger time, without stopping to reload. 

These magazines are perfect for those who have the 3.8 Hi-Capa pistol, allowing you to have more shots available and allowing you to practice pistol loading drills.

A spare or replacement Gas Magazine for the Cyber Gun FN Five Seven (5-7), which holds a total of 17 rounds and is constructed to the exact same standard as the original magazine, using Alloy for the body and Polymer for the feed lips.

If you need spare magazines for your Specna Arms or EMG Salient Arms BLU and you want to keep your pistol pure with the exact mags for the platform these are what you need! These magazines are manufactured by Armourer Works and licenced by Salient Arms through EMG and come with a Salient Arms extended baseplate to complete the SAI look. This is effectively an EU series magazine, but the included baseplate features the S in a cube logo and SAI in recessed detail on the bottom to complete the Salient Arms look.

The magazine can be filled through the fill valve on the baseplate with the magazine held inverted, and BBs can be loaded in through the feed lips at the top, or by pulling the follower down and loading through the widened section of the channel on the front, depending on your preference. Obviously, standard EU series magazines from WE and Armourer Works will fit and feed in the Specna and EMG BLU GBB pistols, but what is the point of going for a stylish Salient Arms pistol without the proper magazines?

An Alloy constructed 23rnd magazine for the RAVEN series of Hi-Capa Gas Blowback Pistols.

If you're looking for spare magazine for your Archon, you've come to the right place. The body is constructed from alloy, for a nice well weighted feel when loading/reloading. Powered by green gas, the mag is filled at the bottom, with the BBs being inserted into the mag using a speedloader via the feed lips or by pulling the spring tab down and filled straight into the BB chamber.

The magazine holds 20 rounds and is fits such models as the EMG Archone Type B.

Want a higher capacity for your GTP9, but don't want to be slowed down by the extra weight?

G&G have revised their original design with a 50 round, extended pistol mag that is now 46% lighter, keeping you fast and agile and helping to keep your reload buttery smooth every time.

Looking for a spare mag for your STTI ST8 NBB Airsoft pistol? You've found what you need, right here! This magazine is designed for the STTI ST8 and is constructed with a polymer shell, alloy gas reservoir, a steel feed spring and brass valves. The magazine can be loaded through the fill/feed port at the top front of the magazine body and is filled with gas through the fill valve on the baseplate. As an alternative to filling with a speed loader you also have the option of pulling down the magazine follower, found on the left side of the mag and filling by hand.

Need some big mags for your big handgun? The Cybergun Desert Eagle green gas magazine should do the trick! This magazine is designed for the Cyber Gun Airsoft Desert Eagle L6 GBB and holds approximately 27 BBs which can be loaded using a speed loader through the feed lips at the top of the magazine. This magazine is a green gas magazine and can be filled through the fill valve on the magazine's baseplate, and can also take summer gas to keep the FPS down to reasonable levels on hot days. The magazine is constructed from alloy with polymer feed lips, with a steel feed spring and brass valves, and has realistic mock witness holes on each side, matching the cut-outs in the real Desert Eagle magazine used for gauging how many rounds are left.

A gas blowback magazine designed for use with the WE Europe P08 Luger 6mm Airsoft BB gun. The magazine is constructed fully from Alloy and features a Polymer BB feed guide.

This magazine is specifically for the STTI ST92F, in that this is a non-blowback mag and features incredible gas efficiency. The magazine is constructed from high high-density polymer and is incredibly lightweight compared to tis alloy counterparts. The magazine holds 23 rounds, filled at the top using a speed loader and the gas is filled at the bottom with green gas.

If you're looking for spare mags for your Golden Eagle Hi-capa, here they are! The 25rnd Green Gas Magazine for Hi-capa GBB is constructed from alloy with brass valves, rubber o-rings, a steel feed spring and a polymer baseplate and is a green gas magazine. The mag can be filled using the fill valve on the base plate and is loaded with BBs either through the feed lips at the top of the mag or by pulling the follower down and loading BBs in through the front.

This magazine is compatible with the Golden Eagle Hi-capa series but is patterned after the TM design so should also be compatible with other Hi-capa platforms as long as they use the Tokyo Marui internal system.

A spare or replacement magazine for the AEG Limited F17/F18 GBB Pistols. This magazine holds 21 rounds and takes 12g unthreaded CO2 capsules. The magazine is of an extended style with a long baseplate, giving your pistol the high capacity look. To install a CO2 capsule, simply pull up on the tab at the bottom of the feed spring and the baseplate should be able to slide off forwards, revealing the Allen screw plug for the CO2 reservoir. Remove this plug with the included Allen key, drop a CO2 capsule in, replace the plug and tighten it down, replace the baseplate and you are good to go!

A spare or replacement magazine for the AEG Limited F17/F18 GBB Pistols. This magazine holds 21 rounds and takes 12g unthreaded CO2 capsules. The magazine is of an extended style with a long baseplate, giving your pistol the high capacity look. To install a CO2 capsule, simply pull up on the tab at the bottom of the feed spring and the baseplate should be able to slide off forwards, revealing the Allen screw plug for the CO2 reservoir. Remove this plug with the included Allen key, drop a CO2 capsule in, replace the plug and tighten it down, replace the baseplate and you are good to go!

A chrome-effect gas magazine for the WE XDM Compact 3.8, which can hold up to 17 rounds.

A replacement magazine for the WE Europe Little Bird pistol collection. The magazine is constructed from Alloy, and is finished matte black.

If you run your Hi-Capa as a primary and find yourself short on ammo, the 44rnd Extended Hi-Capa Magazine for R501/R603/R604 GBB Pistols will keep you shooting for longer! This extended green gas magazine is compatible with Army Armament Hi-Capa GBB pistols but should also fit most Tokyo Marui-based Hi-Capa clones. This is the chrome silver version, ideal for the stylish skirmisher. If you need the black version, check it out here!

Constructed from alloy with a CNC aluminium baseplate and polymer feed lips, loading this mag is the same process as any other GBB pistol magazine; use a speed loader or loading tool and load either through the feed lips on top or by pulling the follower on the front down and loading through the widened section. Filling the amply-sized gas reservoir is equally easy; simply invert the magazine and gas canister and press the nozzle of your canister into the fill valve on the bottom of the mag.

If you use your Hi-Capa as a primary for CQB or like to keep a stendo on hand for emergencies, the Army Armament 44rnd Extended Magazine for R501/R603/R604 GBB Pistols will be a useful addition to your kitlist!

This Airsoft CO2 magazine designed for use in the WE B92, SAMURAI EDGE and other pistols. Each magazine is of a full metal construction and holds up to 25 rounds. The magazine is compatible not only with the Samurai Edge Pistol, but with any WE B92.

An Alloy constructed spare (or replacement) Magazine for the KWC Non-Blowback PM CO2 Makarov Pistol, which takes standard 12g CO2 Bulbs from the side and is filled with 13 x BBs either by hand or with a Speedloader. If you own a KWC PM CO2 Makarov and want to spend longer in the field playing, and less time in the safe zone reloading, then you need to stock up on spare Magazines.

If you're looking to make the most of your SSP19's full-auto fire mode, one of these will do it! The Novritsch 49rnd Extended Gas Magazine for SSP18 GBB is constructed from alloy and an extended design with a 49rnd capacity. This green gas magazine can be filled through the fill valve on the baseplate by inverting it, as you would with any other GBB mag. 

BBs are loaded either through the feed lips at the top or by holding the follower on the front down and filling through the widened section of the follower channel at the front. While it may be heavier and bigger than a standard mag, this is really the only way to do that rapid full auto mode justice!