All External Airsoft Parts & Attachments

A replacement ergonomic pistol grip for M4, M16 and AR-15 Platform AEG Receivers, simply replacing the original grip. 

A replacement ergonomic pistol grip for M4, M16 and AR-15 Platform AEG Receivers, simply replacing the original grip. 

If you want to add some ambidextrous functionality to your M4/AR15 AEG or KWA ERG platform along with a hint of flare, this charging handle from PTS Syndicate would be perfect! The Radian Raptor-LT is based on the real steel Radian Raptor ambidextrous charging handle and includes licenced Radian trademarks laser engraved onto the handle itself.

To add a custom aesthetic, PTS has produced this charging handle with red or black levers on either side, giving your receiver a nice pop and letting observers know your gun has the custom touch!

If you want to add some ambidextrous functionality to your M4/AR15 AEG or KWA ERG platform along with a hint of flare, this charging handle from PTS Syndicate would be perfect! The Radian Raptor-LT is based on the real steel Radian Raptor ambidextrous charging handle and includes licenced Radian trademarks laser engraved onto the handle itself.

To add a custom aesthetic, PTS has produced this charging handle with red or black levers on either side, giving your receiver a nice pop and letting observers know your gun has the custom touch!

If you're in the market for a small tracer unit but want one with a muzzle flash, the Eshooter Flare Cube BT Tracer Unit with Muzzle Flash is your best bet. This compact tracer unit has an ultra-low profile design, measuring approximately 6cm long with a 4cm height and offers muzzle flash functionality in a wide variety of colour options along with standard tracer functionality.

Being so small and light, the FLARE Cube BT is ideal for mounting on GBB pistols and is also an asset to any CQB skirmisher who requires a tracer that doesn't compromise handling qualities or add too much extra length to their primary. As it comes, the FLARE Cube BT is ready to be mounted on 14mm CCW male threaded outer barrels but also includes an 11mm CW adapter for use with WE and Armourer Works pistols. If you run a RAVEN or VORSK pistol, use a 12mm CW to 14mm CCW adapter to mount the Flare Cube BT. Novritsch or Army Armament pistol owners, no need to feel left out, use a 12mm CCW female thread adapter so you can rock the FLARE Cube BT too!

Powered by an internal rechargeable battery and charged via the included USB Type-C charger cable, the FLARE Cube BT charges quickly using the most recent cable type and comes with detailed instructions so you can master its wealth of functionality easily. Whether you run an SMG, Rifle, GBB Pistol or sniper rifle, the FLARE Cube BT is the perfect way to add tracer and muzzle flash functionality to your setup without adding weight or making your primary unwieldy!

If your AK buttstock is too slippery and is hard to shoulder when wearing a tactical vest this is what you need! The Element Rubber Butt Pad for AK47/74 is designed to slip over either AK fixed stocks or the AK74 side folding skeleton stock and provide enhanced grip for poor weather conditions and make the rifle easier to shoulder effectively with modern tactical gear. This butt pad is a copy of the real Izhmash AK butt pad which was issued to the Soviet and Russian Militaries, so would be a great choice for a Milsim build.

If you are in the market for a compact lightweight but very effective flashlight, then look no further! The WADSN M300C Scout Light; Dual Switch Version is a superb choice for skirmishers who are afraid of the dark, or at least what may lurk in those dark corners. This flashlight comes in two colour variants so you can match it with your loadout to keep everything looking uniform, very tactical!

The flashlight mounts onto the common Picatinny rail using its 20mm rail mount. This means it can be attached on most standard platforms with ease. Keep the future bright and those dark rooms brighter with a WADSN M300C Scout Light; Dual Switch Version!

If you are in the market for a compact lightweight but very effective flashlight, then look no further! The WADSN M300C Scout Light; Dual Switch Version is a superb choice for skirmishers who are afraid of the dark, or at least what may lurk in those dark corners. This flashlight comes in two colour variants so you can match it with your loadout to keep everything looking uniform, very tactical!

The flashlight mounts onto the common Picatinny rail using its 20mm rail mount. This means it can be attached on most standard platforms with ease. Keep the future bright and those dark rooms brighter with a WADSN M300C Scout Light; Dual Switch Version!

If you've misplaced your Crane stock's butt plate, here you go! The Delta Armory Butt Plate for Crane M4/AR-15 Battery Stock is a replacement original part and should fit the vast majority of Airsoft Crane stocks, particularly those from Delta Armory, Specna Arms and Lancer Tactical. The butt plate is constructed in two parts; with the base being high density polymer and the outer coating being grippy rubber with lattice texture on its surface.

As mentioned, this should fit almost any Airsoft Crane stock out there but we haven't tested them all, so proceed with caution and remember we cannot accept returns on any butt plate that has been modified.

An Airsoft modular rail panel designed to be fit onto MLOK hand guards, providing a 5'' 20mm RIS / RAS rail. The kit comes as a kit and is easily built and can quickly be installed to MLOK hand guard to allow the attachment of aftermarket Torches, Lasers, Grips and many other aftermarket attachments.

This rail is perfect purchase for any Airsoft player who has got their hands on a new rifle and are looking to take their gun to the next level by attaching parts and accessories.

A tactical folding Vertical Foregrip, designed for use with Airsoft AEG and GBB rifles, which allows the user to flip it down when required and fold back up when not in use to give it a lower profile.

If you have a Double Eagle M90x with the Honey Badger PDW stock and you fancy a change, until now you have been SOL! Introducing the Buffer Tube for Double Eagle M4/AR-15, a replacement original part from the M904 AEG. This set includes an alloy buffer tube and castle nut, a steel bolt and spacer and a polymer receiver stock adapter which can be used to convert an M90x series with the Honey Badger stock to a standard AR buffer tube.

Whether you have damaged the stock mounting apparatus on your Double Eagle M90x polymer receiver or you are bored of the Honey Badger look and you want to change things up, this set is the perfect thing!

An Airsoft bipod with rubber feet for stabilizing Airsoft platforms while shooting from fixed positions. This bipod is compatible with any rifle which has a Picatinny 20mm rail for mounting but also comes with an L96 spigot mount for using this rifle on L96-type rifles with the spigot socket at the front of the stock.

If your M4/AR-15 is due a style up, the Delta Armory CNC Aluminium HEX M-LOK Handguard for M4/AR-15 is what you need! This unique handguard boasts hexagonal vent ports, M-LOK slots at 3, 6, and 9 o'clock and a 20mm Picatinny rail up top, ready for your choice of M-LOK or 20mm Picatinny accessories. The vent ports both look fantastic and reduce weight considerably, giving you a fast-to-point front end and slick external styling. 

Being a free-floated design means this handguard doesn't come into contact with the outer barrel, meaning no negative effects on accuracy regardless of any force applied. The HEX handguard also includes the correct barrel nut to mount it, pre-installed inside the handguard and constructed from aluminium. 

As with most M4/AR-15 handguards, you'll need an M4/AR-15 barrel nut wrench to install the HEX but it should fit most M4/AR-15 receivers on the market, AEG or GBB. If you're looking for a fresh look for your AR platform and want more accessory options with less overall weight, the Delta Armory CNC Aluminium HEX M-LOK Handguard for M4/AR-15 is what you need!

If you're attached to your optic and don't want to see it get blasted, a Lens Protector is what you need! The Guerilla Tactical Lens Protector for 20mm Picatinny Rails sits in front of your optic to take the impact of a BB so your sight stays safe. The protector can be flipped down for storage or transport and is constructed from a durable Perspex with an alloy mount. 

If you're worried about getting your optic shot out, this is a far cheaper alternative rather than buying a whole new optic. If you'd rather replace a cheap lens protector than your favourite scope, the Guerilla Tactical Lens Protector for 20mm Picatinny Rails is essential!

A thread adaptor which allows the attachment of Silencers and Suppressors to WE Europe Pistols with internally threaded 11mm CW outer Barrels. This adapter provides a 14mm CCW male thread, ready for the most common tracer units and suppressors!

If you're worried about losing your RMR red dot to a BB impact, cast your concern aside and add this to your setup! The JJ Airsoft Kill Flash Lens Protector for RMR Red Dot Sights is designed to mount to the front of an RMR or RMR clone micro red dot sight and protect the lens from BB impacts along with reducing glare so your shiny objective lens doesn't give you away. 

If you want to protect your lens while keeping your setup looking realistic, this is the way to go! 

This alloy-constructed rail adaptor is designed for KeyMod rail systems and provides a short section of 20mm Picatinny Rail. You can diversify your Keymod rail and equip it with six slots of 20mm Picatinny rail, perfect for foregrips or lasers! They are very easy to install to KeyMod Rail Slots using the included Screws, Nuts and Allen Key.

Treat your Keymod handguard to a whole new world of customisation with the Delta Armory Key-Mod 93mm Picatinny Rail Section!

If you're searching for a modern vertical foregrip with slick styling and flawless handling, the FMA Compact Vertical Grip for 20mm Picatinny Rails is ideal. This vertical grip is stubby, perfect for those who like to use the "C-clamp" or thumb-over-bore grip. It has a grippy crackle texture on each side and linear serrations on the front, giving you ample traction without becoming uncomfortable without gloves.

This grip mounts to 20mm Picatinny rails via its steel mounting apparatus. If you want more control over your primary when sweeping rapidly between targets, the FMA Compact Vertical Grip for 20mm Picatinny Rails will do the trick!

If you want your AEG to send shivers down the enemy's spine, if anything can do it, this muzzle brake can! The 5KU DTK-2 Russian AK Muzzle Brake is patterned after the real steel Zenitco DTK-2 and is a squat design with a pair of massive ports on each side and two smaller ports on the bottom.

The real device is designed to reduce felt recoil and compensate for muzzle climb and is generally seen on carbine and SBR length AK rifles, though the 5KU example will fit both 14mm CCW and 24mm CW Russian threads, making it compatible with practically any Airsoft gun on the market. If you want to change up the looks of your rifle and make it that bit more menacing, this brake will do it!

A unique and imposing Steel constructed muzzle brake for your AR-15/M4/M16 replica, or any other weapon with a 14mm CCW threaded outer barrel.

A Tactical Assault Rifle Suppressor for Airsoft Rifles, rocking a 14mm CCW thread this classic suppressor style will fit right on almost any Airsoft Assault Rifle or SMG!

If you've misplaced parts from your dust cover, this set should cure that! The Delta Armory Steel Dust Cover for M4/AR-15 AEGs is a replacement original part set for Delta Armory M4/AR-15 platform AEGs but should also fit most other brands, though we cannot guarantee it. The set includes the dust cover, axis pin, c-clip, and spring.

An Alloy constructed Suppressor with Foam Baffles and a Spring Core for support. The end caps of the Suppressor can be unscrewed to access the internals. Designed for Airsoft replicas with a 14mm CCW or CW Thread, this Muzzle Device is the perfect accessory to conceal an Inner Barrel extension, or just to add a personal touch to your Airsoft Gun.

This suppressor has a clever feature which is that it has a 14mm CCW thread on one end and a 14mm CW thread on the other, as such it is compatible with both thread types.

If you have invested in a Tokyo Marui VSR-10 Pro and you want to add an optic, this 20mm receiver rail will do the trick! The Slong Airsoft Receiver 20mm Rail Mount For VSR-10 Sniper Rifle is designed to replace the rear iron sight on the Tokyo Marui VSR-10 Pro sniper rifle but can also be used to replace a worn-out rail on VSR-10 clones or the TM VSR-10 G-Spec sniper rifle.

The rail is constructed from aluminium and finished with matt black anodising, keeping the surface coating thin to ensure the rail remains in spec and capable of mounting any optical sight which fits 20mm Picatinny rails.

One of the few problems with old-school cool like the SMG5 series of AEGs is that you are rather limited in rail mounting space, meaning your mission essential equipment that makes you a true operator has to be left behind. Ask the US Navy SEALs, they are known to use pipe clips and zip ties to attach rails to their MP5SD6s. You no longer have to resort to this pure bodgery, with the Extended top rail mount from CYMA you now have a Picatinny scope mount with forward M-LOK sections for tactical weapon lights, lasers, battery boxes, or anything else you need. This is all kept at the 12 o'clock position, keeping your ambi friendly SMG just that. 

If you're looking for an M-LOK QD sling socket which is ergonomically designed and won't contort your sling, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice. Designed as an alternative to built-in QD sling sockets and standard flat sockets, when installed, this socket faces the shooter, resulting in a more comfortable sling position and less chance of tangles.

Constructed from high-density polymer with a steel QD cup, this socket should be compatible with most QD sling swivels on the market, allowing you to install or disconnect your sling quickly. Due to differences in tolerance between manufacturers, we suggest thoroughly testing this socket before entrusting it with any weight unless you're using it with a PTS-branded QD swivel. If you find the built-in QD sockets on your handguard are positioned suboptimally or don't have any QD sockets on your M-LOK handguard, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice!

A Red Dot Sight for Airsoft Guns, that attaches to 20mm RIS/RAS via the Integrated Mount built in to the unit. With Backup Ironsights, an adjustable Red/Green Crosshair and tough Aluminium construction, this is a great Sight for a new and old players alike.

If you're finding your current battery running out too quickly and have nowhere to store a larger battery this battery extension from Hades Airsoft has got you covered!

A PDW stock extension built from high density polymer, design specifically for the Double Eagle replica. Models include the M904G, M904C, M904L and M904R.

Keep yourself in the fight and shoot for longer durations with battery storage up to 16 cm within the stock.

If you're working on a featherweight M4 build, Delta Armory has the buffer tube for you! The Polymer Buffer Tube for M4/AR-15 AEG is compatible with most Airsoft M4/AR-15 platform AEGs and should also fit AR-9 AEGs which use the same stock mounting lug as standard Marui-spec M4 AEGs.

Providing 6 positions of stock adjustment for whatever M4/AR-15 sliding stock you mount, the tube is constructed from high density polymer with a textured matt finish and is solid as a rock, despite its ultra-low weight. The set also includes the correct length mounting bolt and spacer so you won't have to work too hard to fit it!