All Airsoft Guns

The sneaky counterpart to the Bolster Tuned CM.041 upgraded SMG-5 AEGs has returned and it's better than ever! Enter the CM.041 SD5 SMG-5 Upgraded Edition; a full metal SMG-5 SD5 replica built by the same team behind the ultra-high-end Bolster Armouries AEG series and previous Bolster Tuned AEGs.

As with its less discrete brethren, the first thing the Bolster Armouries team do with the CM.041 SD is to tear it to pieces and build it back up to fulfil its true potential. This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, and a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware.

The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a 4UANTUM Friction Pro High-Performance Hop Up Bucking was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused to increase the strength of the shell to withstand the force of repeated piston impacts, and the bearing holes in the gearbox shell have been smoothed out. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the Bolster Tuned CM.041 SD5 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 SD to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041 SD! 320 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

An Airsoft 6mm BB firing electric AEG designed in the style of the MP5 used by Special Forces around the world. Featuring a lightweight and durable Polymer external construction, this a RIF for those who like to stay light and fast on their feet.

If you like your M4 AEGs simple and effective, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG should be right up your street! Based on the real steel M4A1 in CQB-R configuration, this M4/AR-15 AEG is rocking a 10.5-inch outer barrel, putting it in that sweet spot, with enough barrel length to handle long-range threats while not being too long for close-quarters combat.

The DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is constructed with strong high-density polymer receivers and an aluminium handguard, making it perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game. Inside, we are treated to rock solid, pre-upgraded internals featuring a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up unit, giving you the most modern HOP-up unit style for the M4 AEG platform with superb accuracy potential when adjusted.

If you're fresh to the game and want to start with something a cut above the bare-bones beginner AEG with almost unlimited aftermarket compatibility and the ability to style it up to the nines, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is ideal for you!

The tactical option for MP5 lovers far and wide; whether you want to attach the included foregrip or your own optics, torches, lasers this Airsoft 6mm electric powered replica has you covered.

Amidst the endless droves of pistol calibre carbines and SMGs currently being released, G&G present the MXC-9 to reassert its dominance in the field of CQB Airsoft platforms. The MXC-9 is constructed from high density polymer with a CNC machined aluminium handguard, and makes use of G&G’s superb G2 gearbox, complete with programmable fire controls allowing for 3 round burst.

In the looks department, the MXC-9  is largely based on G&G’s PCC45, and is even compatible with PCC45 magazines, but blends the receiver style of the PCC45 with a shorter handguard, sound amplifying muzzle device and a newly designed multi-position folding stock. Consider this the lovechild of the MCX and PCC45, with the frightening performance of the ARP-9 and SSG-1’s G2 gearbox!

If you’ve seen our videos from IWA and the G&G World Cup you must be lusting after this thing as much as we are! Introducing the G&G Armament ESG-B10 Gas Shotgun, the spiritual successor to the ill-fated FLAK-12 design, a semi-automatic gas-powered shotgun offering the choice between a punishing 5 BBs per trigger pull and a positively evil 10 BBs!

The ESG-B10 is constructed with a CNC Aluminium upper receiver and a superb quality high-density polymer lower, as G&G is known for, and takes standard M4/AR-15 AEG magazines, meaning spares are ever available. Bristling with M-LOK slots on each side and the bottom with a generously long 20mm Picatinny top rail, the ESG-B10 is ready to be kitted out with accessories despite the unique nature of its design.

If you play CQB and need something to take on those drum-mag rocking HPA tri-shot speed-softers, the G&G ESG-B10 will give them a run for their money!

One of the latest pistols designed and built in-house by G&G this pistol does not disappoint. Carrying on the success from the GTP 9 this pistol contains all the latest advances in Airsoft pistol design, with a uniquely designed hop-up system and ceramic whirl valve designed to improve efficiency, reduce cool down, and enhance your Airsoft experience.

If you don't like to waste energy lugging a full metal platform around but want high performance, pre-upgraded internals, the Delta Armory CHARLIE™ ETU range was conceived with you in mind. This is the DA-C04-ETU M4/AR-15 KeyMod AEG, based externally on the original DA-C04 but kitted out internally with Delta's APLHA™ ETU internals.

Inside, we are treated to 16:1 ratio CNC steel gears, CNC aluminium cylinder group parts, a 6.03mm tightbore inner barrel with a high torque Neodymium magnet motor to top it off. The Delta Armory programmable ETU/MOSFET system is also present, offering super snappy trigger response, improved rate of fire and the ability to program the fire controls for burst mode and binary trigger. Whether you're new to skirmishing and want a pre-upgraded platform that can tangle with the best, or you're a veteran who likes to fight easy, the DA-C04-ETU CHARLIE™ M4/AR-15 KeyMod AEG is the ideal addition to your Airsoft armoury!

An Airsoft 6mm BB Gun, designed in a bullpup configuration, based off the Austrian Steyr AUG. The gun features an Alloy Front end, and Sight with Polymer Body and Foregrip.

The Tokyo Marui Saiga-12K Shotgun is the best of the best when it comes to tri-barreled shotguns. This shotgun is making waves in the Airsoft scene, Tokyo Marui is known for its premium quality and this platform does not disappoint! Based on the real-world Saiga-12 shotgun, this replica echoes the silhouette perfectly and can easily be mistaken as some sort of AK variant.

This shotgun features a super immersive and realistic shooting experience with its dedicated blowback system and magazine auto-stop feature. You are sure to feel like royalty on the battlefield with this platform. It can be used both indoors and outdoors, boasting an impressive 50-metre range on 0.28g BBs. This is thanks to the three independent inner barrels, the BBs don't interrupt one another and result in inaccuracy and reduced range.

The shotgun isn't the only premium item in the box, the 45rnd capacity magazine is extremely high quality, providing reliable feeding, strong o-ring seals and an internal temperature sticker so you can ensure your magazines are running at a safe temperature.

Those looking for an affordable AEG they'll never need to upgrade, the Delta Armory DA-DIA-ARENA-A14 Diamond ALPHA™ 10" M-LOK M4/AR-15 AEG is exactly that! Building on the already very impressive Delta ETU series rocking ALPHA™ full metal externals, the Diamond 10" M-LOK M4/AR-15 is the top-of-the-line option from Delta, boasting a few internal changes from the original ETU version to refine 

The best parts of the ETU series are present in this Diamond AEG, including a reinforced gearbox shell, a programmable ETU/MOSFET system, a CNC aluminium cylinder head, CNC steel 16:1 gears and a high torque neodymium magnet motor to deliver the torque needed for a lightning-fast trigger response. 

The Diamond adds an AOE correcting rubber washer, a POM piston head made in the Czech Republic, an upgraded tappet plate spring, 8mm stainless steel ball-bearing bushings and the incredible Delta Armory Berserker Flat HOP-up kit, made by Psionics of Italy. The Berserker kit includes an enhanced HOP-up arm, flat nub and bucking optimised for maximum range, all made by HOP-up legends Psionics, true masters of the HOP-up game. 

The result is a Delta Armory AEG at the top of its game, running smooth as butter and reaching out to very impressive ranges. If you aren't the type of Airsofter to buy a gun and upgrade it over time, get stuck in with the DA-DIA-ARENA-A14 ALPHA™ Diamond 10" M-LOK M4/AR-15 AEG and you won't look back!

If you're in search of a new CQB platform or a compact PDW-style AR for your quick and slick playstyle, the Delta Armory DA-A03 ALPHA™ SilentOps CQB M4/AR-15 AEG should be high on your list of options. This full-metal M4 platform boasts an extremely compact front end, ideal for close-quarters skirmishes or woodland warriors who prefer to move fast with a bite-sized M4 with full-sized firepower. 

Being an AEG of the ALPHA™ range, this beast boasts pre-upgraded internals and a high-quality metal receiver paired with a  CNC aluminium handguard and micro suppressor. Inside, you will find a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness despite its short overall length. 

If your aim is to refute the "size matters" philosophy and prove it truly is how you use it, the Delta Armory DA-A03 ALPHA™ SilentOps CQB M4/AR-15 AEG is the perfect AEG to do it!

Whether you're new to the game and looking to start out with a full metal platform bristling with advanced features or a veteran skirmisher in search of an M4 AEG you can just pick up and go with, the Delta Armory DA-A06 ALPHA™ KeyMod 10" M4/AR-15 AEG is a fine choice. A realistically hefty full metal build with a cutting-edge aesthetic at just the right length to do its dirty work both outdoors and in CQB, the DA-A06 ALPHA™ is ready for any challenge that faces it. 

Equipped with a KeyMod handguard, sound-amplifying muzzle device and modernised receiver on the outside and kitted out with SHS reinforced parts and a 6.03mm tightbore inner barrel the DA-A06 ALPHA™ is an extremely competitive platform, both on price and performance!

If you're after a new M4 AEG but don't like to commit to a particular build direction, the DA-A06 won't make any decisions for you! Thanks to the modularity of the AR platform and the DA-A06 ALPHA™ 10" KeyMod M4/AR-15 AEG is ready to accept a full complement of accessories, kitted out just how you desire and give the enemy team the what for when it comes to skirmish day!

An Airsoft 6mm BB AEG gun, powered by electric and is a replica of the M4A1 Assault Rifle with custom parts. The weapon is primarily constructed from Lightweight yet durable Polymer, with Alloy Parts and Internals.

This is not an AK, I repeat this is not an AK variant! It may share some silhouette similarities but the VZ.58 is a unique platform that was the standard service rifle for the Slovakian military from 1959 to 1984. This Delta Armory replica is licensed by the Real Steel Firearms company Czech Small Arms which is the only manufacturer of SA VZ.58 rifles. The DA-VZ58 is based on the SA VZ.58 Sporter Carbine except with a longer outer barrel. The trademarks to indicate this can be found on the AEG.

Internally, the Delta Armory DA-VZ58 CSA VZ.58 "Kosa" AEG features some of the high-quality pre-upgraded Delta Armory internals such as an EFCS programmable MOSFET 18:1 ratio steel gears, a quick change spring system, a unique gearbox design and a high torque motor. The EFCS MOSFET allows the fire modes to be reprogrammed for burst modes and semi-auto only using the Ares EFCS programmer (available separately) and also features a low-voltage cutoff function, protecting your battery from being damaged if the voltage drops too low.

If you are looking for a mid length M4/AR-15 but you have seen them all, the G&G Armament Cobalt Kinetics BAMF Recon will give you something to get excited about! This M4 platform is a complete redesign of the original M4 on the outside, boasting a unique receiver with 45-degree ambidextrous fire selectors, a flared magazine well and extended controls for fast access.

BAMF stands for "Billet Aluminium Modern Firearm", named for the manufacturing method of the real thing, being machined from billet aluminium instead of the usual M4/AR-15 receiver forgings. While the outside is unique, the internals are the same rock solid stuff G&G is well known for, including the G2 Gearbox with the latest G&G ETU/MOSFET, a rotary adjustable HOP-up unit and a 25K RPM high speed motor providing an astonishing rate of fire and ultra snappy trigger response. If you like the way the ARP-9 and SSG-1 shoot but you don't like their looks, the BAMF Recon is the same on the inside but with an awesome external style!

An electric powered 6mm Airsoft replica of a lesser-seen firearm, the SIG 522 which was designed by the Swiss as a successor to the Sturmgewehr 57 - the brief for which was to produce a compact carbine with an emphasis on modularity.

If you're a stealthy skirmisher seeking a platform to match, the Delta Armory DA-B07 BRAVO™ Silent Ops 7 M4/AR-15 AEG is ideal. A familiar shape to most, this integrally suppressed M4/AR-15 AEG is built to Delta Armory BRAVO™ standards, with a CNC aluminium handguard, aluminium suppressor and alloy outer barrel, elevating realism and build quality dramatically when compared to similar-looking platforms from other brands. 

Inside, we are equipped with the same pre-upgraded internal parts as the other offerings in Delta's BRAVO™ line, including a rotary HOP-up unit, SHS tappet plate and piston, 7mm ball bearing bushings, a CNC Type A flat trigger and a reinforced V2 gearbox shell. The inner barrel also extends through the suppressor and is a 6.03mm tightbore, offering improved accuracy potential and a slight FPS boost from the same power spring. 

If you like to move fast and fight easy but need an aluminium handguard to quieten your realism urges, the Delta Armory DA-B07 BRAVO™ Silent Ops 7 M4/AR-15 AEG is a fine choice. At about the perfect length to handle any engagement distance and respectable pre-upgraded for reliability out of the box, the DA-B07 is a great starter platform and makes a fantastic backup for veteran skirmishers!

The Italian brand Evolution Airsoft has made a name for itself by providing pre-upgraded AEGs with superb quality externals, giving Airsofters what we always wanted; a gun we don't have to mess with! Though some live for the "thrill" of installing upgrades and hoping they work, for the rest of us, Evolution Airsoft has come through once again! The Smart Airsoft Gun series features the same impressive internals and rock solid externals as previous Carbontech AEGs, but with the new and improved ETS II installed.

If your playstyle prioritises stealth and mobility, this is the bundle for you! The Sandy Sneak Beginner Bundle pairs the Specna Arms SA-FX01 FLEX™ AR-9 with the Big Dragon SF Style suppressor in desert bronze, a 7.4V Stock Tube LiPo Battery, a Balance Charger and some 0.25g BBs from VORSK, giving you everything you need to get stuck in bar your choice of eye protection.

The SA-FX01 represents previously unheard-of value for money, boasting far more than its fair share of pre-upgraded parts, a slick and modern M-LOK handguard and the Specna Arms Light Ops Stock in the increasingly popular AR-9 shape. Installing the Blackwater Suppressor is as simple as unscrewing the pre-installed birdcage flash hider and screwing the suppressor on in its place.

The Sandy Sneak bundle will equip you well for both indoor and outdoor skirmishing, but if you need a couple of spare mags, check them out here!

The Italian brand Evolution Airsoft has made a name for itself by providing pre-upgraded AEGs with superb quality externals, giving Airsofters what we always wanted; a gun we don't have to mess with! Though some live for the "thrill" of installing upgrades and hoping they work, for the rest of us, Evolution Airsoft has come through once again! The Smart Airsoft Gun series features the same impressive internals and rock solid externals as previous Carbontech AEGs, but with the new and improved ETS II installed.

The UMG models are great, but wouldn't it be great if we just had something a little more modern? Introducing the G&G PCC45, the 21st Century rendition of the very tired UMG style platform.

The SA-249 MK1 Core is an Electric Gun Replica of the M249 MK1 PARA Light Machinegun, which is made to be as lightweight as possible whilst still being incredibly tough, so that you can run a support role on the skirmish field without absolutely exhausting yourself. If you want an easy to use Airsoft MG, then the lightweight Polymer/Alloy construction, Micro-switchTrigger Unit, Quick Change Spring and Alloy Rotary HOP will be very appealing to you.

Built by G&G from the ground up this weapon is rather unique, based on a .308 styled AR receiver this weapon really stands out from the crowd with its' larger profile and magazines.

If a full metal AR PDW will be your next buy, the Delta Armory DA-A16-EGL ALPHA™ TALOS 1 PDW M4/AR-15 AEG definately deserves your attention! Rocking full metal ALPHA™ standard externals on the outside and some seriously slick technology internally, the TALOS 1 is a mean CQB machine ideal for cutting tight corners up close and personal. 

Inside, the TALOS 1 is equipped with Delta's EAGLE™ programmable MOSFET/ETU, offering a boost in trigger response and rate of fire along with programmable fire controls. Available fire modes include 3 or 5-round burst mode, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you almost too many options all of which can be programmed using the fire controls of the AEG itself. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, giving the TALOS 1 far more long-range effect on target than one might expect!

Whether you specialise in CQB or prefer a short platform for aggressive outdoor play, the Delta Armory DA-A16-EGL ALPHA™ TALOS 1 PDW M4/AR-15 AEG will be an asset to your battlefield role. Dressed to impress on the outside with all the latest attachment interfaces, the TALOS 1 is a force to contend with; kit it out and get busy!

A seriously mould-breaking firepower enhancement, the Acetech Volcano 40mm Airsoft Grenade Launcher combines tracer and muzzle flash functionality with a 40mm MOSCART grenade launcher. Powered by an internal rechargeable battery with the same broad functionality as the legendary Bifrost, the Volcano can be run in stand-alone configuration or mounted to an Airsoft rifle with a 20mm Picatinny bottom rail.

The Volcano is visually stunning when fired, raining glowing BBs down and lighting up the huge cloud of gas like a fireball, thus the name "Volcano". While MOSCART launchers are already a serious threat in CQB, the Volcano is that bit more intimidating!

On the outside, the Volcano is made almost entirely from robust high-density polymer, avoiding the excess weight of other launchers to keep you light on your feet despite your firepower advantage. Ideally used with Acetech Acehive rounds for the best tracer effect, but compatible with practically any MOSCART shell on the market, the Volcano is set to redefine Airsoft launchers as not just badass, but highly effective!

An Airsoft 6mm BB Gun designed by G&G and based on the Honey Badger Style AR15 PDW Assault Rifle, featuring G&G's advanced quality internals and rock-solid alloy externals.

If you're new to Airsoft and want to start with something a bit more advanced than the average M4, the Delta Armory DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG should suit your needs! This M4 CQBR AEG is constructed primarily from high-density polymer, just like the original DA-C02, but unlike the original, this version is rocking the ALPHA™ ETU series internals, flawlessly marrying a lightweight and agile build with a lightening fast trigger response and the ability to program the trigger for binary trigger or burst mode. 

The ETU isn't the only thing added to the DA-C02-ETU; we are also treated to 16:1 ratio CNC steel gears, CNC aluminium cylinder group parts, a 6.03mm tightbore inner barrel with a high torque Neodymium magnet motor to top it off. The result is a surprising trigger response and intense rate of fire, usually reserved for AEGs twice this price! If you want all of the performance but none of the weight of the Delta Armory ALPHA ETU series, the DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG provides exactly that!

If you like the look of the Saiga-12K shotgun but are working on a tight budget, the Double Bell Saiga-12K AEG is a great option! Patterned after the real steel Saiga-12K, a semi-automatic shotgun based on the Kalashnikov AK rifle design, the Double Bell Saiga-12K is an AK AEG underneath its skin, meaning it isn't a true shotgun in Airsoft terms but is compatible with a massive range of upgrade parts for AK AEGs.

Externally, the Saiga-12K boasts full metal construction with a steel receiver, top cover, fire selector switch and magazine release. The only parts which aren't metal on this beast are its handguard, stock and pistol grip. While it may not have the gargantuan ejection port of the real steel Saiga-12K, most of the details are authentically replicated, including the upscaled gas block, enlarged gas tube, chunky 12-gauge style barrel and smooth-profiled receiver top cover.

Inside, the Saiga-12K boasts an alloy version 3 gearbox rocking 18:1 ratio steel gears running on 8mm slide bearings, with a quick change spring system for easy power tuning. The inner barrel is a 6.05mm example, offering improvements in efficiency and accuracy potential compared to the standard 6.08mm bore. Being an AK on the inside, this Saiga-12K is also compatible with AK AEG magazines, meaning it is very economical to run if you've already got a pile of AK AEG mags. While it might not be the Tokyo Marui Saiga-12, the Double Bell Saiga-12K AEG is a great shout if you want the Saiga look without investing in expensive gas mags!

Introducing the VULKAN Advanced AK AEG, Bolster Armouries first AK platform. Built to the same exacting standards as previously released ONYX, ARKOSE, ATLAS and ONYX [Blackout] platforms with a development period far longer than intended, the VULKAN performs to perfection and boasts the finest external parts available on the AK aftermarket; a perfect blend of rugged Eastern utilitarianism and luxurious Western ergonomics.

Based on the LCT LCK104 AEG with little of the original platform remaining, the VULKAN is dressed to impress with an authentic Magpul Zhukov-U Handguard paired with an MOE® AR-15 Stock, offering a highly functional marriage of sleek styling, M-LOK modularity and real steel robustness. LCT's Railed Top Cover, AR Buffer Tube and X47 Enhanced Selector Switch complete the metamorphism, with the 5KU DTK-2 Muzzle Brake enhancing the already brutal aesthetic.

Inside, you'll find flawlessly installed high-end parts from all the biggest names in the Airsoft aftermarket, including Gate Electronics, FPS Softair, Laylax/Prometheus, RetroArms, Warhead Industries, Lonex and Maple Leaf, resulting in performance to rival if not best the Bolster Armouries flagship AEG, the incredible ONYX. Each trigger press produces an instant response with incredible accuracy and range, reaching out to 60 meters comfortably with an impressively tight grouping. Flick the fun switch and all hell breaks loose as the VULKAN emits an astonishing 30 rounds per second with flawless feeding and minimal heat build-up, meeting the Bolster Armouries performance parameters and then some!

As with previous Bolster Armouries platforms, the VULKAN allows you to unleash pure performance guilt-free, knowing your primary was assembled and tuned by talented techs who take pride in their work and simply will not let anything less than perfection leave the workbench, evidenced by the Bolster Armouries 24-Month Dedicated After-Sales Service Programme supplied with each Bolster AEG. This is the premium Airsoft experience, now in AK flavour!