Airsoft Under £100

With this simple trick, you can turn one gun into two guns! The M203 under-barrel grenade launcher: heavy, manly, and ready to shower an unlucky opponent with a cloud of BBs! This is the 12 Inch full-sized variant, ideally suited to mounting to an M16 or M4A1 with a 14.5 inch barrel, though it will fit all M4 variants and anything with a 20mm rail on the handguard (or elsewhere, heretics!) with the included adaptor.

For all you serious SMG5 lovers out there in need of a tracer, this is the one for you! Featuring robust full alloy construction with a smooth, brushed finish for a lightweight build and sleek design.

The tracer unit sports a fluted design, which in the real world equivalent would help displace heat, however even though this is an Airsoft replica the fluted design does have other practical benefits such as reducing weight to prevent your weapon from becoming too forward heavy.

Featuring a tri-lug muzzle attachment method, the tracer can be quickly attached and detached on the fly if you need to switch up your shooting style during gameplay and it can be used on other replicas with a tri-lug device (see special instructions).

If you're after an affordable sidearm with a unique custom style, the Armorer Works VX7 Mod 2 EU17 GBB Pistol will suit your style perfectly. Based on the WE EU17 GBB reinvented with an exciting ported slide and advanced ergonomic frame, this pistol looks a lot more expensive than it actually is!

The P80 frame is one of the most popular upgrades for real steel Glocks, offering an undercut trigger guard, extended beavertail and a full 20mm Picatinny frame rail, enhancing ergonomics and offering broader compatibility with flashlights and laser aiming modules. Up top, the unique Armorer Works slide boasts angled front and rear serrations, anti-glare texture on the top, stylish ports at the front and weight-reduction cuts for a slick, custom look. Inside the slide, the internals are WE EU-series spec, meaning an extra-large blowback unit which provides violent recoil, much heavier than most of its rivals.

A more stylish alternative to the plain Jane EU17, the VX7 Mod 2 is well-machined all around with a fantastic quality polymer frame, edging out pistols twice this price in external quality with no compromises despite its super-low price point. If you need an excuse to get a new pistol or this will be your first, you'll be in good hands with the Armorer Works VX7 Mod 2 EU17 GBB Pistol!

If you are an AK rifle fan you may be feeling left out with all the modern, westernised spitfire tracer units entering the market right now, but 5KU are here to get you into the muzzle flash game! The 5KU PBS-1 Spitfire Tracer Unit is styled after the Soviet-era PBS-1 AK suppressor and includes apparatus to mount the unit on either 24mm AK threads or more common 14mm CCW male threads found on almost all Airsoft rifles. If you are after a more stealthy look for your AK, with the added benefit of being able to use tracer BBs and dazzle the enemy with an ultra-bright muzzle flash effect, the 5KU PBS-1 Spitfire Tracer Unit is what you need!

A Pump Action Airsoft 6mm BB Shotgun, part of CYMAs extensive CM.350 range, based on the real world M870 pump action tactical shotgun. 

An Airsoft Electric Pistol which is based on the 226 series Pistols, and features a MOSFET for a rapid rate of fire and consistent performance.

An Airsoft Electric Pistol which is based on the 226 series Pistols, and features a MOSFET for a rapid rate of fire and consistent performance.

If you need an ultra-modern QD suppressor and flash hider for your long gun, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Taper Mount Kit should suit your needs! This is the taper mount version, pre-fitted with an extended collar which allows for quick attachment and removal via the included steel tri-prong flash hider. The flash hider mounts to 14mm CCW male barrel threads, making it suitable for almost every Airsoft AEG or GBBR.

The Resistance 22M is available in either Tracer or Non-Tracer versions, both of which use the same flawlessly machined 6061 aluminium alloy body. Licenced Griffin Armament® trademarks are present on the suppressor body and are immaculately laser engraved, only differing from the real thing slightly due to the terms of PTS's licence agreement.

The tracer version includes a pre-installed tracer module which is accessible by unscrewing the front cap of the suppressor. Inside, you'll find the USB Type-C charging port on the front of the module and the activation button on the rear. A USB Type-C cable is also included in the set, just in case you don't have loads lying around already! As with all tracer units with internal rechargeable batteries, we recommend recharging the unit every 2 months regardless of usage to maintain battery health.

Other than its easy and quick removal, the advantage of the Taper Mount Kit is its ability to be converted into a Blast Shield using the included threaded ring. Simply unscrew the front of the suppressor body and replace it with the ring and you've got yourself a Griffin Taper Mount Minimalist Blast Shield! If you're looking for a slick modular muzzle device to finish off your rifle build, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Taper Mount Kit is a fine choice!

If you're looking for a micro red dot sight which is a cut above the rest, the JJ Airsoft XFORCE XR5 Solar Powered Mini Red Dot Sight fits the bill! Ready to mount to any 20mm Picatinny rail or RMR mounting standard red dot plate, the XR5 is a unique sight in more than a couple of ways!

Powered via a CR1632 button cell (not included) with a solar cell on board as backup, the XR5 will switch to the solar cell in bright conditions to save your battery power for when the sun goes down. The XR5 also boasts a power saver mode which will automatically shut down the red dot when it is inactive, turning it on again via motion sensors exactly when you need it. The red dot reticle itself is a 2MOA dot, ideal for either pistol or rifle mounting and boasts a whopping 13 brightness settings, ensuring you get a clear view of the reticle in both very bright and pitch-black conditions. The set also includes a "killflash" style lens cover which ensures lens glare doesn't give you away and can also serve to prevent BB impacts, though it may get damaged after a hit or two. 

Windage and elevation are both adjustable via the dials on the right side and top respectively, requiring a flat-head screwdriver to adjust. One of the best features of this sight is its parallax-free nature, ensuring the red dot reticle witnesses the same spot regardless of your head position; a feature often reserved for real steel red dot sights several times this price! With an integral 20mm Picatinny mount and the option to use any RMR footprint/mounting standard mount in a vast ecosystem, the JJ Airsoft XFORCE XR5 Solar Powered Mini Red Dot Sight is as adaptable as it is functional!

If you love the looks of a 1911 but want Hi-capa performance, the RAVEN R14 Hi-capa GBB Pistol w/BDS Red Dot Sight is what you need. Based on the real steel Para Ordnance P14, this Hi-capa platform has the discrete looks of the venerable 1911 with its metal frame and textured grips but takes Hi-capa magazines, giving you the best of both worlds.

The advantage of a Hi-capa mag is its enormous gas reservoir, allowing for great performance under rapid fire and handling cold weather far better than the realistic but very slim 1911 mag. With a full metal build, a 6.03mm tightbore inner barrel pre-installed and a BDS red dot sight sitting on top of the slide for faster target acquisition, the RAVEN R14 w/BDS Red Dot Sight pairs a gorgeous retro aesthetic with modern, combat-ready features!

Whether you're curious about the speedsoft playstyle or seek a reliable, proven and efficient platform as your first sidearm, the Action Army AAP-01 Assassin GBB Pistol; Pre Two-Tone Blue is at the head of the pack. Boasting an astonishing full-auto fire rate and a snappy semi-auto trigger response, the AAP is all about performance; designed for maximum efficiency and packing a 6.03mm tightbore inner barrel to keep you competitive in game.

One of the major perks of choosing the AAP-01 over comparable affordable sidearms is its vast aftermarket parts range; offering everything from carbine kits through 20mm rails to stylish receivers and frames, allowing you to build it out to make it truly yours. As it comes, the AAP-01 is rocking a set of brilliant light-enhancing iron sights designed for fast target acquisition and a 14mm CCW male threaded barrel, ready for a tracer unit or suppressor.

Compatible with common EU-series magazines and equipped with ambidextrous controls, the AAP-01 is easy to master, affordable to run and a fantastic shooter, especially when put side by side with conventionally laid out pistols in a high-intensity CQB scenario. If your sidearm needs prioritise performance, customisation options and cost-effectiveness, you won't find anything better than the Action Army AAP-01 Assassin GBB Pistol; Pre Two-Tone Blue!

If you want to breathe new life into your AEG in the form of speed and torque, the Specna Arms BLDC Brushless Motor; Long is calling your name! The BLDC motor is the affordable option in Specna Arms' new brushless motor lineup, offering the same benefits as the top-end DARK MATTER™ motors with a more economical cast aluminium housing. This variant is the 27K option, offering 27,000 revolutions per minute, plenty for a high-speed build but also an asset to any DMR build requiring a high torque solution.

Brushless Motors boast lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. This, the "long shaft" variant is designed for M4/AR-15 derived AEGs, G3, SMG-5 and P90 AEGs and is a relatively simple install job, though you may need to reinforce other parts to cope with the impressive torque and speed delivered by the BLDC motor.

If you're upgrading your M4, G3, SMG-5 or P90 AEG and seeking more speed for a higher rate of fire or more torque for a better trigger response and the ability to pull strong DMR springs, the BLDC Brushless Motor from Specna Arms is the ideal affordable option!

A non-blowback Airsoft 6mm BB Electric Pistol which is based upon some of the World's most popular pistols, with all of the best bits taken and combined to create one unique pistol which is highly ergonomic.

An electric-powered pistol based on the classic 1911 by Browning. It is a MOSFET edition AEP which means a high rate of fire and consistent performance, making this a great choice for CQB/backup purposes.

An electric-powered pistol based on the classic 1911 by Browning. It is a MOSFET edition AEP which means a high rate of fire and consistent performance, making this a great choice for CQB/backup purposes.

A replacement Bolt Assembly for the DBoys Shell Ejecting KAR98K Spring Powered Sniper Rifle, which is the easiest and most efficient way to repair a Rifle with a damaged action.

For all you secret agents out there, looking for a concealed carry, this is the one for you. But don't let it's compact size fool you, it still packs a punch with a satisfying gas blowback recoil.

This 1911 style pistol from Army Armament, which is ideal for those who love a lightweight, compact design and is also perfect for roleplay skirmishes.

For all you secret agents out there, looking for a concealed carry, this is the one for you. But don't let it's compact size fool you, it still packs a punch with a satisfying gas blowback recoil.

This 1911 style pistol from Army Armament, which is ideal for those who love a lightweight, compact design and is also perfect for roleplay skirmishes.

Calling all Hi-Capa fans! The RAVEN series are back, and this time with a revisit to the ever-popular Hi-Capa platform. The range offers a massive variety of colours, coupled with a strong recoil and smooth slide action for a grin-inducing shooting experience.

Based on the EU Series of pistols this replica is part of the VORSK EU range of pistols which are inspired by the finest and most advanced modern combat and competitive pistol designs. Built and designed with input from leading Airsoft players and manufacturers these pistols are the cream of the crop, and come in a multitude of designs with styles to suit every player's taste.

Based on the EU Series of pistols this replica is part of the VORSK EU range of pistols which are inspired by the finest and most advanced modern combat and competitive pistol designs. Built and designed with input from leading Airsoft players and manufacturers these pistols are the cream of the crop, and come in a multitude of designs with styles to suit every player's taste.

If your sidearm tastes dictate style but you're on a tight budget, the Armorer Works VX7 Mod 3 EU17 GBB Pistol is ideal. A spicy-looking alternative to the rather bland EU17, the VX7 is dressed to impress with a stylish custom slide and ergonomic frame, all for far less money than its boring brethren!

The P80 frame is one of the most popular upgrades for real steel Glocks, offering an undercut trigger guard, extended beavertail and a full 20mm Picatinny frame rail, enhancing ergonomics and offering broader compatibility with flashlights and laser aiming modules. Up top, the unique Armorer Works slide boasts angled front and rear serrations, anti-glare texture on the top, stylish ports at the front and weight-reduction cuts for a slick, custom look. Inside the slide, the internals are WE EU-series spec, meaning an extra-large blowback unit which provides violent recoil, much heavier than most of its rivals.

If you were looking for an excuse to expand your pistol collection or you need a budget sidearm which is ready to rock, the VX7 Mod 3 EU17 GBB Pistol is a fantastic choice. With top-shelf looks at bargain-bin prices, the VX7 Mod 3 its one of the best value sidearms on the market at the moment!

Short and compact like it's real world counterpart, but with some full metal weight behind it and some solid internals, it still packs a punch! 

This Airsoft stockless variation of the iconic M870 if for those of you for an operator's choice to clear rooms in CQB skirmishes and with it's satisfying pump action and tri-shot spread, enemy insurgents won't last long with this shotgun making quick work of them!

This Upper and Lower Receiver Set is an original replacement part for the APS ASR series M4/AR15 AEGs but may also fit other gearboxes, though it may require modification. The set includes an alloy upper and lower receiver, a bolt catch, charging handle, a magazine release, trigger guard, a steel dust cover and steel body pins. If you are building a spare upper for your APS ASR AEG this would be a perfect fit, but could also be used to add a touch of metal to a polymer M4/AR15 as long as you are okay with potentially undertaking modifications.

This huge gun bag is designed to carry two of your favourite primaries! With a length of 130cm, this bag is pretty much guaranteed to accommodate any of your rifles, snipers or shotguns. There are also internal pockets to store the necessary tools required for your platforms. The bag also has a choice of a simple carry handle or backpack straps so you can carry your Airsoft platforms conveniently to the skirmish battlefield.

A series of Flip-To-Side Magnifiers for 20mm rails which are available in either a 3x or 5x magnification to align with a Red Dot Sight to help you reach out and touch targets further away than your naked eye would allow.

Please note:  The mount may differ from image due to new model release

If you like uniquely styled compact pistols, the Armorer Works VX9 Mod 1 EU19 GBB Pistol should be right up your street! This full metal GBB pistol is based on the EU19 design but dressed to impress with a P80-inspired enhanced frame and unique ported slide. For the price, this is one of the best-looking GBB pistols out there in our opinion!

The P80 frame is one of the most popular upgrades for real steel Glocks, offering an undercut trigger guard, extended beavertail and a full 20mm Picatinny frame rail, enhancing ergonomics and offering broader compatibility with flashlights and laser aiming modules. Up top, the unique Armorer Works slide boasts angled front and rear serrations, anti-glare texture on the top, stylish ports at the front and weight-reduction cuts for a slick, custom look. Inside the slide, the internals are WE EU-series spec, meaning an extra-large blowback unit which provides violent recoil, much heavier than most of its rivals.

The VX9 is Armorer Works' "compact" offering, ideal for those who want to carry a sidearm which is a bit smaller and lighter than "service pistol" sized platforms but still packs a punch when you need it. Whether it will be your first sidearm or you're smitten by its distinctive looks, the Armorer Works VX9 Mod 1 EU19 GBB Pistol will definitely treat you right!

If you are looking for a cheap yet decent holster filler, Golden Eagle has something you'll like! The G.E Hi-capa 4.3 is a full metal clone of the Tokyo Marui, meaning 100% compatibility with aftermarket upgrades and the intense recoil and realistic feel of full metal straight out of the box.

Though it is based on the Tokyo Marui 4.3, the Golden Eagle Hi-capa has a 6.02mm tightbore inner barrel, adding to its accuracy potential, improving gas efficiency and raising FPS slightly. Golden Eagle also saw fit to add an 11mm CW female threaded outer barrel, meaning you don't need a new outer barrel to fit a tracer or suppressor, just an 11mm CW to 14mm CCW adapter. Unlike many other cheap GBB pistols, the Golden Eagle Hi-capa feels buttery smooth when cycling and is remarkably consistent, pointing to well-made internals and tight tolerances.

Whether its fate is to be your trusty sidearm, ready for close encounters, or it is destined to be built up into a Speedsoft monster, bristling with upgrades, the Golden Eagle Hi-capa will serve you well!

If you plan to run your Tokyo Marui Hi-Capa GBB on HPA, the Army Armament HPA Adapter for M4/AR-15 AEG Magazines; GBB Hi-Capa will considerably improve your firepower!

This HPA adapter is designed for the Tokyo Marui Hi-Capa GBB series and may fit Hi-Capa clones based on the TM design, though we can't make any guarantees. It allows standard M4/AR-15 AEG mags to be used along with a High-Pressure Air (HPA) power source, so you can kiss goodbye to the "cooldown" effect and limited magazine capacity if you're rocking this on your Capa!

The set includes an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will take your gameplay to the next level!

A gas blow back replica of a modern 1911 MEU, faithfully reproduced in Alloy with a gorgeous black finish.