Airsoft Under £75

If your sidearm tastes dictate style but you're on a tight budget, the Armorer Works VX7 Mod 3 EU17 GBB Pistol is ideal. A spicy-looking alternative to the rather bland EU17, the VX7 is dressed to impress with a stylish custom slide and ergonomic frame, all for far less money than its boring brethren!

The P80 frame is one of the most popular upgrades for real steel Glocks, offering an undercut trigger guard, extended beavertail and a full 20mm Picatinny frame rail, enhancing ergonomics and offering broader compatibility with flashlights and laser aiming modules. Up top, the unique Armorer Works slide boasts angled front and rear serrations, anti-glare texture on the top, stylish ports at the front and weight-reduction cuts for a slick, custom look. Inside the slide, the internals are WE EU-series spec, meaning an extra-large blowback unit which provides violent recoil, much heavier than most of its rivals.

If you were looking for an excuse to expand your pistol collection or you need a budget sidearm which is ready to rock, the VX7 Mod 3 EU17 GBB Pistol is a fantastic choice. With top-shelf looks at bargain-bin prices, the VX7 Mod 3 its one of the best value sidearms on the market at the moment!

An upgraded optic over the traditional standard 3-9x50 alternative. The E version comes with illumination settings with both Red and Green illumination levels.

If you're looking for a unique QD red dot sight, look no further! The PCS Red/Green Multi-Reticle QD Sight for 20mm Picatinny Rail is a great choice for your Airsoft rifle; it offers a red or green dot with four different reticles for each. It is powered by an LR41 battery that can be inserted into the right-hand side of the scope.

Your choice of reticle can be selected via the dial on the rear of the sight, offering a simple dot, ringed dot, cross or ringed cross reticle, perfect for any environment or preference. With an integral QD mount, all the reticle options one could ever need along with full adjustment when it comes to zero, reticle colour and brightness, the PCS Red/Green Multi-Reticle QD Sight for 20mm Picatinny Rail is an impressive bit of kit for an equally impressive price!

Looking to get the first shot off when breaching a room? A tri-shot shotgun would be a fine tool for the task. The Double Eagle M56A is constructed with an alloy outer barrel and mock magazine tube with a polymer receiver and is a tri-shot spring-powered Airsoft shotgun which takes mock shotgun shells loaded through the mock breach. Each time you shoot the M56A 3 BBs will be sent downrange in a triangular spread pattern, giving you better hit probability and realistically simulating a real shotgun's spread pattern.

A 20 Rounds Green Gas Magazine for the UMAREX Airsoft HK417D Gas Blowback Rifle.

Take your shooting to the next level with the Perun MOSFET ETU++ for G&G G2 ETU AEG, which gives you access to many advanced features such as burst fire, binary trigger, system diagnostics and many more!

The unit is designed to replace your G&G G2 ETU and provide a whole bunch of extra functions, with more options than even the original G2 boasts. Far easier to install compared with alternatives, the Perun ETU++ replaces the stock G&G G2 electronics board with no need to open the gearbox, however, the installation will still require a certain level of knowledge and experience.

Ideal for reviving worn out RIFs or as a backup for a rainy day, this is a complete and assembled gearbox including motor, that is ready to drop into any compatible Version 2 accepting replica.

An 6mm Airsoft Gas Blowback Pistol with a lightweight and efficient slide, this is an ideal 'beginners Gas Blowback Pistol'.

An Alloy constructed spare or replacement magazine for the G&G GTP9 Gas Blowback Pistol and SMC9 Gas Blowback Carbine. It holds a total of 50rnds and has a huge gas reservoir to ensure it can hold enough gas to perform throughout the entire magazine.

If you want a magazine for every season and you're running a CGS or TM ZET system GBBR, get one of these! The CYMA 30rnd Green Gas/HPA Gas Magazine for CGS/MWS GBBRs is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and has a green gas fill valve and a HPA line attachment point on the rear of the STANAG style body.

The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs. 

To use this magazine with HPA lines, instead of swapping the whole magazine when out of ammo, you can purchase separate quick-detach BB tubes. By pulling the tab rearwards on the bottom of the magazine you can remove the internal BB tube and then insert another one. This means that you can carry way more BBs without the hassle of large magazines occupying your rigs!

Whether you feel like using gas or HPA, this magazine has you covered for all occasions and is the perfect all-year-round gas magazine, just make sure to get some separate BB tubes if you plan on using HPA!

If you are running a SCAR and you want to make it sexy a rail extension is the key to making jaws drop! The Double Bell M-LOK 5 Inch Handguard Extension For SCAR is designed to fit the Double Bell SCAR-H (it will not fit the Double Bell SCAR-L) but should also fit the DBoys SCAR-H and VFC SCAR-L and SCAR-H AEGs as well as others based on the VFC construction style.

The handguard boasts CNC Aluminium construction for precision and weight savings and comes packaged with a 9.3cm/3.75-inch barrel extension so your outer barrel is the correct length for the extension. Present on each side is a QD sling socket to give you the option to add a slick QD sling setup with QD sling swivels. On each side and on the bottom we have M-LOK negative space attachment slots and on the top of the extended piece there is a short length of 20mm Picatinny rail in the ideal spot to mount a PEQ, DBAL or tactical flashlight. Ditch those 20mm rails and get some M-LOK on your SCAR and get it ready for combat in the 2020s!

The M322 Scout Tactical Flashlight is a modern LED torch with RM45 offset mount for Picatinny 20 mm rail. This flashlight produces a fantastic 280 lumens from 1x CR123 battery, made possible due to the modern CRE2 LED bulb installed.

An advantage of this torch over similar models is that it comes with 2 switches that can be used in tandem, thank to the dual function tail cap. It features a constant on push button in addition to a lead-attached pressure switch . This means that you don't have to unscrew one to get to the other, like in some other flashlight models.

Another feature unique to this torch is the mount, in that it is an offset mount that allows it to be mounted closer to the handguard for a slick overall platform.

If you are running a SCAR and you want to make it sexy a rail extension is the key to making jaws drop! The Double Bell M-LOK 5 Inch Handguard Extension For SCAR is designed to fit the Double Bell SCAR-H (it will not fit the Double Bell SCAR-L) but should also fit the DBoys SCAR-H and VFC SCAR-L and SCAR-H AEGs as well as others based on the VFC construction style.

The handguard boasts CNC Aluminium construction for precision and weight savings and comes packaged with a 9.3cm/3.75-inch barrel extension so your outer barrel is the correct length for the extension. Present on each side is a QD sling socket to give you the option to add a slick QD sling setup with QD sling swivels. On each side and on the bottom we have M-LOK negative space attachment slots and on the top of the extended piece there is a short length of 20mm Picatinny rail in the ideal spot to mount a PEQ, DBAL or tactical flashlight. Ditch those 20mm rails and get some M-LOK on your SCAR and get it ready for combat in the 2020s!

If you fancy the sneaky look for your Airsoft rifle, the PTS Syndicate Griffin Armament® GP5™ Direct Thread Suppressor is what you need! A flawlessly machined and officially licenced replica of the real steel Griffin GP5™ (GeneralPurpose Mod.5), this suppressor mounts directly to 14mm CCW male barrel threads, saving you a fair bit of weight when compared to QD suppressors to keep the front end of your primary lightweight and easy to point.

The body of the GP5™ is flawlessly machined and dead on accurate to the real thing, even down to the discretely engravedlicenced Griffin Armament trademarks. The only deviation is the inclusion of the PTS logo and "For Airsoft Use Only", though these markings are very discrete and hard to find if you aren't looking for them!

The GP5™ is available in Non-Tracer and Tracer forms, with the latter including a pre-installed tracer module instead of the mock baffles inside. The tracer version includes a pre-installed tracer module which is accessible by unscrewing the front cap of the suppressor. Inside, you'll find the USB Type-C charging port on the front of the module and the activation button on the rear. The charging cable is NOT included so make sure you've got one ready. As with all tracer units with internal rechargeable batteries, we recommend recharging the unit every 2 months regardless of usage to maintain battery health.

If you're into the finer things in life and need a suppressor to top off your build, the PTS Syndicate Griffin Armament® GP5™ Direct Thread Suppressor will do the trick. Providing the elite, realistic look a professional build needs with far less added weight than most comparable suppressors, the GP5™ looks fantastic and won't slow you down!

If you want to sharpen your skills, whether for skirmishing or competition, the Novritsch Bluetooth Timer Target is what you need to shoot at your best. When hit, this steel target produces a satisfying ring, but that isn't its only perk! Its Bluetooth connectivity means you can track your split times and play 3 different game modes using your iOS or Android device. 

With a 40m Bluetooth range, the Bluetooth Timer Target allows you to run long-range courses of fire or practice your snap shooting skills up close. An LED indicator light on the front tells you when the target has been hit, its current status and warns you when the internal rechargeable battery is running low. If you want to be the sharpest shooter on the field, the Novritsch Bluetooth Timer Target will get you there!

If you want to run your SSP18 or EU-series GBB on HPA, the Novritsch HPA SMG-5 Magazine Adapter for EU Series GBB Pistols; Gen 2 is the easiest way to do it. This adapter is pre-built using a zinc alloy magazine body and fibre-reinforced nylon polymer adapter and is outfitted for US Spec HPA lines by default. This adapter is designed to feed from curved MP5/SMG-5 AEG mid-cap magazines and HPA from an external tank (not included), increasing capacity considerably and practically eliminating FPS fluctuation due to the "cooldown" effect. 

The adapter is pre-assembled, meaning you don't need to mess around putting it together or run the risk of doing it wrong and causing injury. Naturally, you'll need an HPA bottle, air line and regulator to use this adapter and the fitting is US Spec, meaning only US Spec air lines will fit. If you're running your SSP18 in the Novritsch Minimalist Carbine Kit or as a primary, the Novritsch HPA SMG-5 Magazine Adapter for EU Series GBB Pistols; Gen 2 will give you the rapid-fire performance and capacity you need to stay ahead!

A 20 Round Green Gas Magazine for the UMAREX Heckler & Koch Gas Blowback G3A3 Rifle.

If you like uniquely styled compact pistols, the Armorer Works VX9 Mod 1 EU19 GBB Pistol should be right up your street! This full metal GBB pistol is based on the EU19 design but dressed to impress with a P80-inspired enhanced frame and unique ported slide. For the price, this is one of the best-looking GBB pistols out there in our opinion!

The P80 frame is one of the most popular upgrades for real steel Glocks, offering an undercut trigger guard, extended beavertail and a full 20mm Picatinny frame rail, enhancing ergonomics and offering broader compatibility with flashlights and laser aiming modules. Up top, the unique Armorer Works slide boasts angled front and rear serrations, anti-glare texture on the top, stylish ports at the front and weight-reduction cuts for a slick, custom look. Inside the slide, the internals are WE EU-series spec, meaning an extra-large blowback unit which provides violent recoil, much heavier than most of its rivals.

The VX9 is Armorer Works' "compact" offering, ideal for those who want to carry a sidearm which is a bit smaller and lighter than "service pistol" sized platforms but still packs a punch when you need it. Whether it will be your first sidearm or you're smitten by its distinctive looks, the Armorer Works VX9 Mod 1 EU19 GBB Pistol will definitely treat you right!

A 3-9x telescopic sight with variable zoom and crosshair illumination, for Airsoft sniper rifles and DMRs. This scope comes with scope rings for 20mm Picatinny rails, meaning you can slap it straight onto your sniper rifle and get shooting with no extra bits to buy! The illuminated reticle is easy to pick up in any ambient lighting conditions, and the field of view through its massive 50mm objective lens makes it the perfect long-range engagement tool. 

The Wolverine Hard Case, like the animal, is dedicated to the fierce protection of all nestled within. The Case is decked out with four layers of Pick and Pluck Foam that can be customised to perfectly fit around your items, reducing movement and damage in transit. The Case has a Rubber Seal that prevents the ingress of Water and Dust, and the tough construction protects contents from Extreme Temperatures and Impacts, as well as featuring a Pressure Relief Valve to balance the inner Pressure of the case when travelling to new altitudes.

If you are looking for a suppressor and tracer unit in one, the NUPROL BOCCA Series 5.2" Tracer Unit is ideal for you! It is styled to look like modern real steel suppressors and would be a fine choice for the skirmisher who wants every advantage in game and wants to look the part while doing it. The collar surrounding the base of the tracer adds to its realistic look and provides extra grip when adding and removing the tracer.

The tracer unit has an internal rechargeable battery that charges using a Micro-USB cable (included). To access the charging port, you must remove the tracer unit from its external shell. To do this, turn the collar counter-clockwise, with the threaded end facing you.

The tracer is constructed from aluminium alloy and has a decent weight and heft, making it perhaps a bit too heavy for GBB pistol use but perfect for mounting on a CQB-optimised rifle. If you want to turn the skirmish site into a laser-filled rave, the NUPROL BOCCA Series 5.2" Tracer Unit is perfect for you!

If you have plans to style up your AK for 21st century combat the CYMA Aluminium M-LOK Handguard adds M-LOK accessory slots so you can mount the latest and greatest mission essentials and benefit from reduced weight! The set includes an upper handguard with "Grater" style vents and a lower handguard with M-LOK negative space attachment slots at the 3, 6, and 9 o'clock positions.

Both the upper and lower handguard are constructed from aluminium using CNC machining and are finished with matt black anodising for a smooth and flawless finish. Compatibility-wise, this handguard should fit practically an AK47/74 platform AEG or GBB rifle but will not fit AKS-74U rifles due to their shorter length handguards. Give your AK the PMC or civilian tactical look!

If you are looking for a Tracer Unit with Russian styling the KP-9 Spitfire Tracer Unit from 5KU is one to keep an eye on. This device is based on the real world MPI KP-9 flash suppressor used by Russian Special Forces with their PP-19-01 SMGs and is ideal for any 9mm style Airsoft SMG but will fit any Airsoft rifle with a 14mm CCW male threaded barrel.

This KP-9 isn't just about the looks either, inside you will find a Spitfire Tracer insert which illuminates green tracer BBs and provides a realistic muzzle flash effect each time you fire. The unit can be operated in flash only, tracer only or tracer and flash mode, giving plenty of options for the aggressive, the realism focussed and the more stealthy playstyles out there. Whether you run a PP-19 AEG or you are looking for the most menacing looking Spitfire tracer unit out there, this will do the trick!

If you want to take pure advantage of the inherent modularity of the VORSK VMP-2, these Complete Trigger Groups are the key! Available in semi-auto only for DMR builds or select fire (semi/full auto) for assault rifle setups, the VORSK Complete Trigger Group for VMP-2 Series is constructed from alloy with steel springs, pins and screws.

If you're rocking the VMP-2D or VMP-2MD, the select fire version will allow you to convert your DMR into an assault rifle, though you'll also need a low power nozzle to keep your build site legal. Installing the semi-auto only version in the VMP-2M will lock it to semi-auto, allowing you to pop a high power nozzle inside and run it as a compact DMR!

Each trigger group comes pre-built and equipped with ambidextrous fire controls, making it an almost literal "drop in" installation. No need to fiddle with small springs and awkward little screws installing these! Despite the super easy installation, any internal modification made will void the VMP-2's original 12-month warranty so we only recommend these for the pros!

If you're always bending your neck awkwardly to look down sights, the Novritsch High Red Dot & PEQ Box Mount V3 will cure that! This raised optic mount is patterned after real steel "Hydra" mounts, offering a raised mount for T1/T2 style red dot sights and a 20mm Picatinny rail for a PEQ/DBAL laser unit or scope camera. This mount is designed for 20mm Picatinny rails and includes a pair of "recoil lugs" on the bottom which hold it in place firmly on your rail. 

Constructed from CNC machined aluminium with steel mounting bolts, this mount fits the Novritsch Red Dot Sight V3, Vector Optics Maverick and Maverick Gen II, Vortex Sparc Solar and Holosun 403B. It should also fit most T1 and T2 clones provided they correctly replicate the real Aimpoint Micro mounting standard. Being slightly higher than a standard T1 mount, the High Red Dot & PEQ Box Mount V3 is ideal for those who have a hard time getting a clear sight picture using full face protection, being designed in the real world for use with respirators and night vision devices. 

If you like to keep your smile pretty by wearing lower face or full face protection, the Novritsch High Red Dot & PEQ Box Mount V3 will let you get on target without straining your neck!

If you have had your eye on one of the super cool new spitfire tracers on the market but would prefer it in a more AK-friendly design, we have just what you need! The Vityaz Spitfire Tracer unit from 5KU combines the awesome functionality of a spitfire tracer unit, with its realistic muzzle flash effect and tracing function when used with tracer BBs with the unique looks of a Russian designed suppressor.

A mock Airsoft suppressor designed specifically for the MP9 GBB submachine gun, featuring genuine Brugger & Thomet AG licensed trademarks.

If you need a way to carry more kit in comfort, look no further than the Novritsch MOLLE Battle Belt 3.0! Styled after modern MOLLE battle belts, the Battle Belt 3.0 boasts the unique Novritsch laser-cut MOLLE style, allowing you to mount MOLLE pouches wherever you need them and match the styling of the ASPC and other Novritsch tactical gear perfectly. 

The belt itself is padded for comfort with heavy loads and can be paired with the Novritsch Harness 3.0 to create a modern webbing belt solution, similar to old-school PLCE in feel but with all the advantages of modern MOLLE interfaces. Available in 3 different sizes and 7 colour options, the Novritsch MOLLE Battle Belt 3.0 is a fine solution regardless of your intended use or loadout style!

A pre-assembled, ready to use complete gearbox set designed for use in 6mm Airsoft BB replica M14 AEGs. With all the components assembled and in place, this gearbox is ready to be dropped into place in your M14 AEG, replacing any old and worn out gearboxes.

If you're looking for an SSP18 slide that features a stylish metallic finish, but still remains lightweight thanks to its aluminium construction, Novritsch has you covered. The Novritsch SSP18 CNC Slide is a superb way to make your Novritsch SSP18 stand out on the battlefield and turn heads with a flashy design!

The CNC top and side cuts help reduce weight, resulting in faster cycling speed, and give your pistol an ultra-modern look. Customisation is the name of the game with this slide, which allows you to craft an SSP18 unique to you, so your opponents will always remember who sent them back to the safe zone.

Modern Airsofters are always looking for a lightweight slide to improve on those all-important cycling speeds, but if you aren't willing to compromise your style with a polymer slide, an aluminium slide is what you want! The SSP18 features an incredibly low weight thanks to its CNC cuts and grooves, which also make your pistol stand out from the rest. The slide transforms your SSP18 from a simple and functional pistol to a custom and unique extension of yourself with forward-thinking and futuristic stylings.