Airsoft Under £75

The SR Q Furniture Set is a complete Grip/Stock set for AK Platform GBBs (Gas Blowback Guns), and will provide a gorgeous and futuristic all-in-one Pistol Grip and Stock, as well as a comfortable Foregrip to give your AK a sci-fi update! This kit is very easy to install, needing only your Stock and Pistol Grip to be removed, and is the perfect way to give your Airsoft Gun a modern update.

Wan to bling out your VSR Bar 10? Treat your rifle with this 22.5-inch fluted barrel in your choice of either twisted or straight fluting, whichever would suit your loadout more. The PPSH barrel is constructed from extremely lightweight aluminium to help keep you light on your feet during skirmishes.

The fluting has been machined to a perfect uniformity that it sure to give your VSR/Bar-10 a sleek modern aesthetic. In real steel-rifles, fluting helps disperse heat from the barrel, as well as keep the barrel's weight down. At the end of the barrel is a 14mm female CCW thread for use with attaching tactical muzzle devices, such as flash hiders, suppressors and tracer units. Included is a thread cap if you don't fancy running any muzzle devices and like to keep things simple.

Wan to bling out your VSR Bar 10? Treat your rifle with this 22.5-inch fluted barrel in your choice of either twisted or straight fluting, whichever would suit your loadout more. The PPSH barrel is constructed from extremely lightweight aluminium to help keep you light on your feet during skirmishes.

The fluting has been machined to a perfect uniformity that it sure to give your VSR/Bar-10 a sleek modern aesthetic. In real steel-rifles, fluting helps disperse heat from the barrel, as well as keep the barrel's weight down. At the end of the barrel is a 14mm female CCW thread for use with attaching tactical muzzle devices, such as flash hiders, suppressors and tracer units. Included is a thread cap if you don't fancy running any muzzle devices and like to keep things simple.

Does your plate carrier get a bit hot and sweaty in summer? If so, the Skeletal Cummerbund with QR system from EmersonGear could be the solution to your temperature issues. This cummerbund is designed to replace the original cummerbund on most plate carriers which use a Velcro secured cummerbund, and provide skeletonised sides for better airflow and a quick-release system, so you can get your carrier off quickly and cool down after the skirmish! This cummerbund attaches via velcro at the front, and elastic cord at the rear.

If you are looking to further extend your advantage and push your TM NGRS system to the limits reinforced gears are a must for long term reliability under increased stress. The Laylax EG Hard Gear Set is specifically designed for the Tokyo Marui Next Generation Recoil Shock (NGRS) gearbox and includes a hardened steel spur gear, sector gear and bevel gear. This gearset is a standard ratio set (18:1), intended to provide a great compromise between high speed and high torque, allowing you to take your build in either direction and still benefit from reinforced gears!

For those looking for the ultimate low profile pistol torch, stop searching! You've found it, powered by a single AAA battery you can dazzle your targets for hours without having excessive weight and bulk at the front of your Airsoft pistol.

Suppose you're looking for some extra magazines for your WE gas blowback AK platforms, if so, then this WE 30rnd Gas Magazine is exactly what you need! It has a polymer shell and alloy internals with a steel spring, which makes it robust and reliable, perfect for the battlefield. The magazine features a slick black design that matches most AK platforms perfectly.

The magazine holds up to 30 rounds, and features Polymer feed lips, which is also the BB fill location using an Airsoft speedloader. The magazine gas fill valve is found on the bottom of the magazine. The insertion method for this magazine is the traditional AK "rock and lock" style, this means you have to insert the front section of your mag first, then, "rock" your magazine back to "lock" it in place in your AK rifle.

If you want a high-quality magazine that will never let you or your WE gas blowback AK down, the WE 30rnd Gas Magazine for WE AK GBBRs is certainly the choice for you!

A lightweight, low profile, foam filled mock Plate Carrier from EmersonGear. If you're a player who likes to keep things simple but effective, this PC might be for you.

If you need more firepower without extra length or weight, the EMG 40mm MOSCART 12" "HAVOC" Grenade Launcher is perfect for you. This launcher has been licensed by the real steel brand Spike's Tactical and looks almost identical. It has a 12" rail mounting section so you can attach it to most common assault rifles which have a Picatinny bottom rail. To mount it, slide the launcher on your rail and open the loading action to screw in the Allen Key bolts.

This launcher has been seen in multiple movies, including John Wick 2 in its stand-alone version, which can be made with the EMG KAOS Conversion Kit For 12" HAVOC Grenade Launcher and can look something like this. Like other Airsoft launchers, the "HAVOC" 40mm requires MOSCART grenades as a power source and will require at least 1 grenade to function. Most MOSCARTs work like a giant shotgun, though specialised MOSCARTs that shoot different payloads are available.

If you want to give your primary a more aggressive look with a firepower increase as a bonus, the EMG 40mm MOSCART 12" "HAVOC" Grenade Launcher will give you what you need!

If you're after a menacing armoured look but don't want to sweat too much, the Novritsch Premium Tactical FAST Bump Helmet is a fine choice! This helmet replicates the real steel Bump FAST helmet, featuring ARC accessory rails on each side and an NVG mount up front, complete with a protective insert.

The set includes external Velcro, which can be mounted wherever you need it, allowing you to style up your lid with morale and I.D patches. Also included is a modular pad set, allowing you to get the perfect fit, regardless of your head geometry and whether you wear a comms headset or not.

One of the best features of this helmet is its OCC adjustment dial, located on the rear of the suspension. The OCC dial provides perfect stability when cranked down, meaning if you have an action camera or other kit mounted to your lid, it won't slide around on your head during dynamic movements. If you're going for the kitted-out look and need a lightweight but solid helmet that looks the business, Novritsch Premium Tactical FAST Bump Helmet is exactly that!

If you've had motor issues and need a reliable replacement, here you go! The NUPROL High Torque Short Shaft Motor is an upgraded high torque motor for M4/AR-15 AEGs. This is the perfect upgrade part if you want to crank up your trigger response for some snappy semi-auto work or increase torque to handle high-power springs. The set includes a D-type pinion gear and pinion spring, both of which are pre-installed on the motor shaft.

As far as Hi-capa parts go, Airsoft Masterpiece are currently producing some of the best the Airsoft world has ever seen! The Steel Grip safety Type 2 replaces your original beavertail grip safety with a precisely machined steel part, guaranteed to perform when you need it!

If you're running a WE SMG-8 GBB platform, you'll need a few of these to keep the fun and kills coming! The WE 44rnd Magazine for WE GBB SMGs is constructed from alloy and compatible with the WE SMG-8 and similar platforms from WE. The mag can be loaded either through the feed lips at the top of the mag body or through the feed channel by pulling the follower down. We recommend a speed loader to make the loading process easy and avoid being the last one ready on game day!

This is a green gas magazine and is compatible with summer gas, green gas or red gas and can be filled by inverting the magazine through the fill valve on the baseplate.

If you want a new look for your CYMA AK or you're building the big boy RPK series, Battleaxe has the kit for you! The RPK Wood Conversion Kit for AK-47/74 is designed to fit CYMA AK AEGs but should also fit other brands but may need modification. The set includes a real wood upper handguard, lower handguard and stock beautifully finished to mimic the real thing.

The attention to detail paid by Battleaxe in this kit is evident when you notice the super-realistic laminated plywood construction, just like real Russian AK wood. This is great for the stitch counters, and while this wood may not be as strong as the real Russian stuff, it's ample for Airsoft use and looks far better than cheaper alternatives. Whether your objective is to build a seriously unique AK or complete your RPK support gun build, this Wood Conversion Kit is a fantastic option!

If you're running a compact platform with limited rail space or simply seek a sprinkle of "gucci" for your build, the Airsoft Artisan K High Rise Mount with Extension for T1/T2 Red Dot Sight is well-suited to the task! Made from precisely machined aluminium and patterned after an up-and-coming alternative to popular "Skiff" and "Hydra" mounts, the K High Rise Mount is phenomenally built and packs a lot of functionality into a relatively simple-looking mount!

The set includes what is known as a "Diving Board", a section of rail which attaches to the front of the optic mount, ideal for a PEQ or DBAL laser unit. This can be removed to reduce weight and improve field of view, revealing the minimalist skeletonised design of the mount itself. On each side, the K High Rise Mount features a single M-LOK attachment slot, allowing you to mount an M-LOK rail to each side (with the M-LOK nut removed) to add even more accessories, should the mission require it.

The K High Rise Mount is designed for 20mm Picatinny rails and is compatible with red dot sights using the Aimpoint Micro footprint/mounting standard, including most T1 and T2 clones. If your mates all run Hydras and Skiffs, take a walk on the wild side and make them jealous with the Airsoft Artisan K High Rise Mount with Extension for T1/T2 Red Dot Sight!

For those looking for a more realistic handling experience from their Hi-capa 4.3, Airsoft Masterpiece has come through again, this time with a steel outer barrel complete with 11mm CW female threads! This outer barrel is constructed entirely from steel, and is immaculately finished down to each dummy locking ridge and the .45 ACP engraving on the chamber. Adding a steel barrel can alter your pistols handling characteristics considerably, raising the point of balance and making it feel more like a real firearm.

The EMG Strike Industries Handguard is a flawless replica of the real steel Strike Industries VOA handguard, equipped with 10 M-LOK slots, finger grooves for maximum traction and stylish ports to keep weight to a minimum. It is constructed from CNC aluminium, guaranteeing durability whilst minimising the overall weight. It is compatible with most Golden Eagle M870 shotguns, excluding ones with an extended top rail or short handguards; fitting may be required with others.

It is equipped with a row of 4 M-LOK slots running along the bottom and two additional slots on each side. Thankfully, there is plenty of clearance between the mock mag tube and handguard, meaning these M-LOK slots are ready to rock with M-LOK accessories, including vertical or angled foregrips, tactical flashlights or 20mm rail adapters for those who prefer 20mm accessories. The VOA provides superb gripping qualities and feels fantastic, with or without gloves; a major enhancement compared to the original 870 handguard.

The EMG Strike Industries Handguard is a flawless replica of the real steel Strike Industries VOA handguard, equipped with 10 M-LOK slots, finger grooves for maximum traction and stylish ports to keep weight to a minimum. It is constructed from CNC aluminium, guaranteeing durability whilst minimising the overall weight. It is compatible with most Golden Eagle M870 shotguns, excluding ones with an extended top rail or short handguards; fitting may be required with others.

It is equipped with a row of 4 M-LOK slots running along the bottom and two additional slots on each side. Thankfully, there is plenty of clearance between the mock mag tube and handguard, meaning these M-LOK slots are ready to rock with M-LOK accessories, including vertical or angled foregrips, tactical flashlights or 20mm rail adapters for those who prefer 20mm accessories. The VOA provides superb gripping qualities and feels fantastic, with or without gloves; a major enhancement compared to the original 870 handguard.