CYMA Airsoft

If you need more battery space but want to keep your M4/AR-15 AEG slim on the sides, the CYMA Adjustable Whale Stock; Shorty is what you need. This sliding stock is designed for M4/AR-15 buffer tubes and offers a fantastic alternative to common Crane stocks used for rear-wired AEG setups. The shorter variant of the original Whale Stock, this version shaves off a couple of cm, saving weight and length to keep your setup light 'n' tight. 

The advantage of the Whale Stock over the Crane is its slim profile, avoiding the side bulges of the Crane stock in favour of a larger stock "toe" for battery storage. This means you can use a much larger battery than would fit in a buffer tube but still enjoy the slim, snag-free profile of more slimline AR stocks. To access the battery compartment, simply push the catch on the butt plate down and it will hinge open. 

The Whale Stock also features a QD sling socket on each side, ready for a QD sling swivel, along with a conventional sling loop at the toe of the stock for hook or strap-style slings. If you want a new look for your buffer tube-equipped AR AEG but refuse to surrender your massive battery, the Whale Stock is what you need!

The CYMA CM.041H is a new model in the Platinum series, which offers a solid external build combined with awesome internal components, for an SMG-5 experience like no other. With an internal MOSFET, CNC steel gears and more contained within a reinforced Version 2 Gearbox, this is one of the finest SMG-5s available at the moment. Quoted to have a ROF of 25RPS and a very fast trigger response, this is perfect for getting gritty up at the front of the skirmish.

An electric powered tactical 9mm SMG platform which offers a 20mm railed handguard, 14mm CCW threaded outer barrel as well as a solid stock with loads of battery space.

Want to keep your Airsoft rifle looking like its real steel counterpart? Then this realistic muzzle break will help! The CYMA M4 Type Flash Hider For 14mm CCW Thread replicates the real M4 muzzle brake seen on service rifles and is constructed from alloy with 14mm CCW threading. Real muzzle brakes are designed to reduce felt recoil by redirecting gas out of the ports on each side, and although you won't get this effect with an Airsoft muzzle brake it will give your Airsoft rifle a modern, iconic look.

If you want sneaky styling for your CM.702 M24 or a tracer to light the enemy up, the CYMA Silencer Adapter for CM.702 M24 Sniper Rifle is what you need. This adapter replaces the front barrel cap, providing 14mm CCW male threads so you can mount the most common suppressors, tracer units and other muzzle devices on the Airsoft market. 

An Airsoft replica of the classic M16 style fixed solid stock, designed for use on Airsoft 6mm BB replica M4s, M15s and M16 AEGs. Just like the real stock this replica is based on, the CYMA stock is constructed from dense polymer to create a lightweight and rugged firing platform.

If you're just getting into Airsoft and don't want to invest too much, our CM.517 M4 SD Beginner Bundle was made with you in mind! This set includes the CYMA Sport CM.517 M4 SD, 4000 Delta Armory 0.25g Diamond BBs, a 9.6V 1600mAh NiMh battery, a NiMh battery charger, a battery safe charging bag and a set of NUPROL Pro Mesh Goggles.

This is probably the cheapest way to get into Airsoft at the moment, though if you're going to be skirmishing right away, we recommend grabbing a lower face mask or a full face mask. Check out the Full Description to learn more about this fantastic value beginner bundle

If you have dinged up your integral suppressor for your CM.041SD, fear not! You can have your sneaky beaky SMG looking great once again with this replacement original part from CYMA.

Looking for a lightweight yet functional M4 with a compact form for a run and gun play style? Fast movers on the skirmish field will love the CM.605 for its perfect balance of polymer and alloy parts, providing a robust and solid M4 platform with remarkably low weight and superb handling. The CM.605 is an M4 AEG in CQBR configuration, matching military M4s with shortened barrels for close-quarters work. 

If you need a new primary for outdoor skirmishes,  the CYMA CM.098 SR-25 DMR AEG; Kestrel Basic ETU is a great shout. Boasting full metal construction, a pre-installed QD suppressor and CYMA's Platinum E-Edition internals, the CM.098 has the beastly 7.62x51mm styling a proper DMR platform deserves!

Inside, you'll find a version 2 long gearbox equipped with 8mm solid bushings, a CNC machined aluminium silent piston head and cylinder head set, a polycarbonate piston with a full rack of steel teeth, a ball bearing quick change spring guide and a high torque Neodymium magnet motor. The inner barrel is also a 6.03mm tightbore paired with a rotary HOP-up unit, giving you the parts you need to do your dirty work at long range. 

The Kestrel Basic ETU is the perfect finishing touch, offering programmable fire mode options including 3-round burst and binary trigger along with 5 levels of adjustable pre-cocking; allowing you to tune the trigger response to perfection. If you're in search of a DMR base gun or a big-boshing rifle for woodland warfare, the CYMA CM.098 SR-25 DMR AEG; Kestrel Basic ETU is a great choice!

If you are looking for a replacement piston for your Real Sword or CM.057 variant SVD, then CYMA has come to the rescue! The CYMA SVD/SVU Piston and Head Set includes the piston itself, a piston head and a piston head O-ring. The piston has a full 18-tooth rack of steel teeth, improving strength while keeping overall weight manageable, making it great for high-performance SVD builds.

The piston is constructed from durable polymer and the piston head from CNC anodised aluminium. The piston head features vents to improve tightness and has a rubber pad to help absorb the shock from impact when the platform is fired. The piston head also has a bearing within it to improve the spring action of your SVD replica.

The set is designed exclusively for the Real Sword or Cyma variants of the SVD and is NOT compatible with other brands' SVD platforms.

If you like an AK but want something a bit more handy for CQB, the CM.045A AKS-74U is what you need! This subcompact AK variant is constructed almost entirely from steel, with a stamped steel receiver and top cover to give an authentic feel in the hands, along with real wood handguards to complete the AK look. 

While the build quality of the CM.045A is second to none in its pricerange, the internals are also worth shouting about! Featuring steel gears running on 7mm ball bearing bushings, a ball bearing equipped spring guide, a high torque motor and a silent piston and cylinder head set you have very little else to do to get the most out of this "Krinkov" AKS-74U.  If you want a realistic AK that shoots as good as it looks, you have found it!

The CYMA Blue Limited Edition series are a premium line of Airsoft Electric Guns which featured upgraded internals over what you would normally expect from a tactical Airsoft SMG-5 replica.

If you want a new look for your M4/AR-15 AEG a new stock is probably the easiest way to do it! The VLTR Style Clubfoot IMOD stock from CYMA is an enhanced stock design with a Crane stock sized battery compartment built in and aluminium QD sling sockets on either side. The set includes the IMOD stock, a 6-position M4/AR-15 buffer tube and the mounting bolt and spacer so you can fit the stock as an alternative to fixed stocks and PDW stocks. This is why they call the M4 platform "Barbie for men"!

If you want to mount a suppressor or tracer unit to your CYMA CM.702 series sniper rifle, this is the adapter you need! Constructed from steel and designed to mount to the CM.702's 20x1mm female barrel threading, the CYMA 14mm CCW Thread Adapter for CM.702 Series Sniper Rifles provides a 14mm CCW male thread at the tip, ready for the most common Airsoft tracer units and suppressors. 

The CM.009C MOSFET Edition is an M16 platform Airsoft Electric Gun replica of the A1 variant, which saw heavy use in Vietnam. Much like the CYMA Platinum series, this AEG features a MOSFET and Electronic Unit that makes a serious improvement on trigger response, which is really the only thing you could complain about on the previous model. It also features a Quick Change Spring for quicker and easier Main Spring changes; very helpful if you play at multiple sites with different power limits. If you're looking for either a period accurate Airsoft Gun or you're looking for your first rifle, this is a seriously strong contender.

Stylish modern AKs are a gorgeous way to take your Russian loadout into the 20th century! The CYMA CM.113B AKS-74U Zco Custom AEG is a compact powerhouse designed to dominate the battlefield and look good whilst doing so. This beast boasts full metal construction with a hefty steel receiver along with flawlessly machined external enhancements inspired by real steel Zco parts. With a dynamic and individualistic style, the CM.113B is perfect for any contemporary AK-themed loadout!

Internally, we're treated to CYMAs high-speed E-Edition internals, including 13:1 high-speed CNC steel gears running on 8mm ball bearing bushings, a polymer piston with a full steel tooth rack, a CNC aluminium piston head and cylinder head, a high-speed Neodymium magnet motor, low-resistance wiring and a 6.03mm tightbore inner barrel. Also inside is the EShooter Kestrel Basic ETU, offering 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection.

So, if you're keen on a modern Russian loadout or you like the one-of-a-kind Zco style, the CYMA CM.113B AKS-74U Zco Custom AEG; Kestrel Basic ETU should be just the platform for you, plus, its compact but highly adjustable design makes it great for pretty much any playstyle!

If you've got some old MWS, CGS or Hi-Capa mags to refurbish, the CYMA CGS / MWS / Hi-Capa GBB Magazine Output Valve is what you need! This set is a complete replacement original knocker valve (aka output valve), the valve at the top of the magazine which is struck by the valve knocker.

Compatibility-wise, this should fit Tokyo Marui MWS ZET System Mags, CYMA CGS GBBR magazines, Tokyo Marui Hi-Capa mags and some TM clone Hi-Capa magazines (though this is not guaranteed). Whether you like to keep spares on hand so you're always battle-ready or your mags are a bit tired and need a revamp, the CYMA CGS / MWS / Hi-Capa GBB Magazine Output Valve will do the trick!

A stylish and well-constructed electric-powered Bullpup that features a 650mm Inner Barrel, 14mm CCW Thread, M-LOK Handguard, Dovetail Rail, Rotary HOP Unit and Suppressor in a deadly and compact package, and comes included with a Battery & Charger.

A well built and well thought out Airsoft Electric replica of the AR-10 platform, which offers tough construction and a wealth of top-tier features such as a Quick Change Spring, Microswitch Trigger, MOSFET and other high-quality internals to make this perfect for beginners and experts alike.

A well built and well thought out Airsoft Electric replica of the AR-10 platform, which offers tough construction and a wealth of top-tier features such as a Quick Change Spring, Microswitch Trigger, MOSFET and other high-quality internals to make this perfect for beginners and experts alike.

If your CYMA CM.098 or CM.057 needs a revamp, the CYMA Stainless Steel Cylinder for CM.057 SVD & CM.098 SR-25 AEGs should be of use. This stainless steel cylinder is ribbed to promote heat dissipation and polished on the inside for minimal friction. 

This cylinder is a standard bore unported cylinder and is compatible with version 2 long gearboxes found in CA/A&K SR-25 AEGs and CYMA CM.098 SR-25 AEGs and also fits the Real Sword spec SVD gearbox used in the CYMA CM.057 SVD/SVU series and the Real Sword SVD Dragunov. 

The Platinum Edition Series from CYMA represents a massive step up in quality over your typical out-of-the-box Gun. CYMA have crafted an exceptionally solid Rifle that comes with a whole host of internal upgrade and features that you wouldn't normally see out of the box. If you're wanting to pick up the best Airsoft Gun you possibly can for your money, then the CYMA CM.097 Platinum Edition Series offer incredible value for money. With a Quick Change Spring, Microswitch Trigger, MOSFET and CNC Aluminium externals AND internals, this is a great way to get the most bang for your buck.

An Airsoft 6mm BB Gun Replica of the M14 Enhanced Battle Rifle, and is every bit as beautiful as it is heavy. The Rifle features a highly realistic construction, with an Alloy Receiver, Handguard, Outer Barrel, Flash Hider, Iron Sights, with a Polymer Handguard Covers, Pistol Grip, Stock and features all the bells and whistles you would expect from such a rifle. 

An Airsoft 6mm BB Gun Replica of the M14 Enhanced Battle Rifle, and is every bit as beautiful as it is heavy. The Rifle features a highly realistic construction, with an Alloy Receiver, Handguard, Outer Barrel, Flash Hider, Iron Sights, with a Polymer Handguard Covers, Pistol Grip, Stock and features all the bells and whistles you would expect from such a rifle. 

If you have misplaced your SMG-5's rear body/stock pin you are in luck! This CYMA original replacement part is designed for CYMA SMG-5 AEGs but may also fit others. This pin is the rear body pin which holds the stock to the receiver and is constructed from alloy.

If you want to restore the factory fresh look to your workhorse AK, this part may be of use. The Rear Sight Block for the CM.04x Series is an original replacement part for AKM and AK74 rifles of the CM.04x series. This part will not work on AKS-74U AEGs, but should otherwise fit AKs which use the LCT style of construction. The sight block is constructed from alloy and comes with steel pins to mount it, and includes the handguard disassembly lever but does not include the rear sight or the rear sight leaf spring. The surface finish of this part is a rough textured finish which is a close match for the hard-wearing paint applied to Russian AK variants of the 1960s and onwards.

If you want to add a modern touch to your AK, the CYMA Aluminium KeyMod Handguard for AK-47/74 is what you need! This CNC Aluminium handguard is equipped with KeyMod negative space attachment slots at 3, 6, & 9 o'clock with a 20mm Picatinny rail running along the top, ready for a PMC-style forward-mounted red dot sight. 

On each side, we are treated to a pre-installed 20mm Picatinny rail adapter for KeyMod, giving you the option of using more common 20mm Picatinny accessories or removing the adapters to mount more modern KeyMod solutions. The handguard itself is constructed in two parts, allowing you to use both or simply the upper or lower handguard, depending on your build requirements. If you're going for the modern tactical AK look, the CYMA Aluminium KeyMod Handguard for AK-47/74 is perfect for your build!

If you've lost or damaged important parts from your CYMA's mag release, this should sort you out! The CYMA Bolt Catch is a replacement original part. Compatibility-wise, this set is intended for CYMA AEGs with alloy receivers, if your bolt catch got broken in a freak Airsoft accident, this set should get you back in the action!

If you're running an AEP and need more firepower, check this out! The CYMA 100rnd Auto Winding Drum Magazine for CM.030/122/123/127 AEP is electrically powered via an internal rechargeable battery, charging via the included USB Type-C cable. The charging port is on the front, as is the auto-winding button, allowing you to increase capacity without wearing your thumbs-down winding a wheel!

To fill the mag with BBs, simply open the fill window on the rear of the magazine body and pour your BBs in. Next, press the winding button until the noise changes to tension the magazine, ready for insertion. If your mag stops feeding but still has rounds left, hold the button to retention and then get back to shooting! 

Compatibility-wise, this magazine fits the CM.030, CM.122, CM.123, CM.127, ASG XP17 Challenger and CM.135S AEPs. If you're fed up with reloading with fiddly AEP mags, get this and you won't look back!