CYMA Airsoft

An Electric Powered Airsoft AEG, designed to look like the MK12 Special Purpose Rifle which is currently in service and used by the US Navy SOCOM Units, and was built by CYMA with custom design elements added by P&J and is the perfect base for a DMR Rifle.

If you are in the market for something with stealthy looks that is also remarkably quiet to shoot, check out the CM.070 M4SD from CYMA. This M4/AR15 platform AEG sports full metal construction, a 6.03mm tight bore inner barrel, alloy rotary HOP-up unit, long quad 20mm Picatinny rail handguard, and extended controls, but the real icing on the cake is its silent piston and cylinder heads, which significantly muffle the gearbox noise. Coupled with the included suppressor, this AEG is practically as quiet as they come out of the box!

If you've got leaky M4 ZET system mags, these could help fix them up! The CYMA CGS Enhanced M4 ZET System Gas Route Bucking 70 Degrees - Set includes 5 gas route buckings/seals for TM ZET system M4 GBBR magazines constructed from 70-degree hardness rubber for temperature resistance and improvements in strength.

Not only a handy spare to have on hand for anyone with TM ZET system M4 magazines, these gas route buckings can also help improve gas efficiency by reducing gas leakage between the magazine and nozzle, especially if you've installed a CGS nozzle or bolt carrier group into your TM. The CGS Enhanced M4 ZET System Gas Route Bucking is compatible with Tokyo Marui and CYMA CGS M4 magazines and should also fit the Double Eagle M4 ZET system magazines.

If your collection is missing a shotgun, now would be the time! The CYMA CM.360LM M3 Super 90 Long is based on the legendary Tokyo Marui tri-shot shotgun design but with full metal construction and a few added details to refresh the old but proven tri-shot design. This is the Long variant of the M3 Super 90, known amongst Airsofters for its role in the movie Heat (1995) and known in the real steel world as one of the most advanced and high quality military/law enforcement shotguns ever devised.

Working with a shotgun, whether you are indoors or outdoors, has its own set of challenges; ideal for the CQB pro who is bored of getting easy kills with their AEG. Like the sniper in the woods, the shotgun-wielding skirmisher must choose their shots and time their reloads just right, though the shotgun provides the advantage of having a higher hit probability thanks to its tri-shot configuration and a faster first shot when entering a room. If you are ready to get your pump on, you can't do much better than CYMA's full metal tri-shot range!

If you are keeping your eye out for an M4 platform AEG which combines low weight with a long barrel for superb outdoors performance you can put it back in again, you have found a great option! The CM.612 from CYMA sports the usual rock solid internals from the CM.6xx M4 series but with a 16 inch outer barrel and the gorgeous KAC style URX-2 quad rail system to give it a dynamic and high speed look. The CM.612 would be an asset in an outdoors skirmish thanks to its long 6.03mm tightbore inner barrel, offering accuracy and range which is unattainable for shorter setups. If you do the majority of your Airsoft *beep* whipping in the woods, this AEG would suit you well.

Fans of the SR-25 platform rejoice! This Airsoft Electric Gun is the finest replica of the firearm we have seen without breaking the bank or doing a tonne of modification out of the box. Featuring a MOSFET, Microswitch Trigger and Quick Change Spring to name a few, this is the perfect out-of-the-box gun.

If you're looking for a solid, modern M4/AR-15 AEG fitted with some of the best stock internals out there, the CYMA Platinum CM.097A M4/AR-15 AEG; Kestrel Basic ETU is one to watch! The latest version of the original CM.097, this version is equipped with the EShooter Kestrel Basic ETU, the perfect compliment to its thoroughly upgraded Platinum E-Edition internals!

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off! 

On the outside, the CM.097A is very well equipped, ready to host M-LOK or 20mm Picatinny accessories and equipped with a 14mm CCW male threaded outer barrel, ready for your tracer unit or suppressor. If you like the sound of a solid, proven high-performance M4/AR-15 AEG made even better with advanced, programmable firemodes, the CYMA Platinum CM.097A M4/AR-15 AEG; Kestrel Basic ETU will suit you perfectly!

If you're looking for an ergonomic enhancement for your M4, the CYMA Enhanced Pistol Grip for M4/AR-15 AEG is a great affordable option! Made from robust high density polymer, this pistol grip is set at a more vertical angle than the average, making it fantastic for shooting with modern stances with the stock fully collapsed.

Each side is rocking dot texture, with additional linear texture on the front and rear, maximising gripping qualities for easy wet weather use. Compatibility-wise, this grip should fit almost every M4/AR-15 AEG on the market, provided it is based on the original TM M4 AEG internal and external design.

If you've had motor issues and need a cheap replacement, here you go! The CYMA High Torque Neodymium Magnet Motor; Long Shaft is a high-torque upgrade motor for M4/AR-15, SMG-5 (not K), M14, G3 and P90 AEGs. This is the perfect upgrade part if you want to crank up your trigger response for some snappy semi-auto work or increase torque to handle high-power springs. The set includes a pre-installed D-type pinion gear and pinion spring, both of which are pre-installed on the shaft.

An absolute pleasure to hold and shoot. Don't let the budget price tag put you off. This AK is rock solid and every shot is lovely and crisp. The wood is genuinely real and finished to a high quality with no fraying or splintering on any edges. 

If you like to keep spares around just in case or you've had a selector plate failure in your Thompson or Pulse Rifle AEG, this is what you need! The CYMA Selector Plate for CM.033/051 Thompson AEG is an replacement original part from the CYMA CM.033/051 Thompson AEG series, constructed from polymer. Compatibility-wise, this should fit all Tokyo Marui spec Thompson and M41A Aliens Pulse Rifle AEGs, including those made by CYMA, Snow Wolf and Tokyo Marui.

If you want to add some tactical trimmings to your AK an extended fire selector would be a good call. The CYMA Tactical Extended Fire Selector Lever for AK47/74 AEG is constructed from stamped steel and is a modernised design with a cutout for the AK bolt handle and a ledge that can be used to select fire modes from a firing grip.

With this selector installed you no longer need to take your hand off the pistol grip to select your fire mode; simply move the new selector using the ledge and your trigger finger. This makes a massive difference when it comes to handling an AK and allows it to go toe to toe with the AR platform in ergonomics and efficiency. A perfect item for any Tactical AK or PMC style custom AK build, this selector lever not only looks super slick but also makes your AK super slick to use!

This magazine is styled after the real 32rnd DD M4 Magazines, complete with an increased capacity of 230 BBs and a high-vis yellow fill/feed port to mimic the high-vis follower of the real thing, and to ensure you don't insert the mag backwards!

This magazine is designed to be compatible with high-speed builds, so if your AEG demands a high-quality magazine to keep up with its appetite, this will do the trick. Just like any other Airsoft mid-cap, loading this mag is done through the fill/feed port on the top of the magazine with an Airsoft speed loader or loading tool. This magazine is designed for an M4/AR-15 AEG platform but has also been designed with universal compatibility in mind, so they should also fit most SCAR-L, 416, L85 and other AEGs with M4 mag compatibility. 

As a bonus, the DD mag design sports a grippy texture on the sides, the front and the rear to assist in wet weather operations and a loop on the baseplate for "mag-podding" or attaching a paracord pull assist. With official licencing, high-quality build, massive capacity for a mid-cap and no battle rattle to give you away, these magazines will see you well equipped to face down with high-cap users while nearly doubling the capacity of your usual 130rnd mid-cap

If your CYMA MOSFET has met its end, or you want a cheap and cheerful upgrade, the CYMA MOSFET for V2 Gearbox is ideal. This MOSFET is a replacement original part for the CYMA Platinum AEG series and should work with any AEG which uses a version 2 gearbox. When installed, this MOSFET should improve trigger response and rate of fire, along with eliminating the chances of your trigger contacts becoming corroded. 

The MOSFET is pre-wired with two sets of spade connectors and you can choose between rear-wired and front-wired configurations. Please note, certain gearboxes will need modification to install this MOSFET/ETU unless they already have a slot in the shell designed for an electronic trigger. We only recommend this part for experienced users! 

If your CYMA MOSFET has met its end, or you want a cheap and cheerful upgrade, the CYMA MOSFET for V2 Gearbox is ideal. This MOSFET is a replacement original part for the CYMA Platinum AEG series and should work with any AEG which uses a version 2 gearbox. When installed, this MOSFET should improve trigger response and rate of fire, along with eliminating the chances of your trigger contacts becoming corroded. 

The MOSFET is pre-wired with two sets of spade connectors and you can choose between rear-wired and front-wired configurations. Please note, certain gearboxes will need modification to install this MOSFET/ETU unless they already have a slot in the shell designed for an electronic trigger. We only recommend this part for experienced users! 

The CYMA CGS Feed Lips & Gas Route Bucking Set for ZET System M4 GBBR provides 5 sets of feed lips and 5 gas route buckings for your magazines, allowing you to fix up old mags or keep spares handy just in case. This set is designed for TM ZET system M4 GBBR mags and should also fit clones of the TM design, including CYMA CGS M4 GBBR mags and Double Eagle M4 GBBR mags.

The included feed lips are an ideal spare part to have on hand; as any experienced GBBR user will know, dropping a hefty gas mag is likely to break the lips and render the magazine useless. The Gas Route Buckings are also very useful in the event your magazine develops a leak from the top, and can also help improve gas efficiency should you decide to upgrade your TM or Double Eagle M4 GBBR with a steel CGS bolt carrier group. If you're getting in deep with ZET system GBBRs, this set belongs in your toolbox!

For those of you looking to get into Airsoft, or start your sniper loadout, this could be gun for you.

Great out of the box, delivering a consistently high FPS, between 420-500fps. A Sniper rifle that can be used without any upgrades and features a lightweight ergonomic build, with a satisfying bolt action and tightbore barrel.

If you are looking for something to keep heads down at an outdoor skirmish, or something to upgrade to a DMR in the future, the CM.068D is perfectly suited to the task! This M4/AR15 platform AEG sports full metal construction, a 6.03mm tight bore inner barrel, long quad 20mm Picatinny rail handguard, and extended controls, but the real icing on the cake is its silent piston and cylinder heads, which significantly muffle the gearbox noise. This rifle is a few choice upgrades away from DMR capability, but performs surprisingly well as it is!

If your CM.041 SMG-5 has a loose or rattly charging handle, this might solve it! The CYMA Charging Handle Spring Catch for SMG-5 is a replacement original part for the CM.041 series and will work on the -SD models but not the -K. This part braces the spring inside the receiver and keeps your charging handle tight and in place. If you pull your charging handle back and there is no spring tension and the handle loosely wanders around in the cocking tube, you probably need a new one of these!

If you own an AK-47S underfolder AEG and you want to elevate its realism, a metal body kit is the key! The CYMA Metal Receiver for TM AK47S AEG is compatible with the CYMA CM.028S and Tokyo Marui AK-47S AEGs and will also fit others as long as they use the Tokyo Marui external design and have an underfolding stock.

The receiver is designed to match the original AK-47S "milled" receiver style, complete with weight-reducing cutouts at the front on either side, steel mock pins for some nice extra detail and engraved Cyrillic fire selector markings, an appropriate nod to realism. At the rear of the receiver, there are cutouts so an underfolding stock can be installed, and there are no conventional stock tangs on this receiver so it is not compatible with the full stock or side folding stock variants of the AK-47 AEG. If you want your AK-47S to be as its creator intended, this metal receiver kit is what you need!

If you are looking for a primary for your Vietnam war loadout this will do the trick! Complete with period accurate XM177E1 sound and flash moderator and 2 position XM177 style stock, the CM.009D XM177E1 is the old school tacticool carbine from a time before the M4!

This AKM Platform Airsoft Gun is powered by a battery in the stock and features realistic construction with Real Wood Furniture, as well as a Dovetail Side Rail for AK specific attachments.

If you like an aggressive military-style AR with real steal trademarks, the CYMA COLT CGS 14.5" M4A1 RAS SOPMOD GBBR should suit your needs. This full metal gas blowback rifle is based on the real steel M4A1 in SOPMOD Block 1 configuration, equipped with a CNC aluminium 20mm Picatinny quad rail patterned after the real steel KAC RAS. This is the perfect platform for a US Army impression!

Internally, this beast is based on the Tokyo Marui ZET system, giving you the best current option for GBBR internals with the widest aftermarket for upgrade parts. You won't need many upgrades though; with almost entirely steel trigger parts, a steel bolt carrier, a steel bolt catch and a 6.03mm tightbore inner barrel, the CGS M4A1 is probably the best out-of-the-box GBBR available currently!

If you're planning to upgrade your CYMA CM.700 or CM.708 sniper rifle, install this first! The CYMA Stainless Steel Cylinder for CM.700/708 Sniper Rifle is pre-assembled with a brass cylinder head, rubber O-ring and stainless steel cylinder with a welded bolt handle mount for maximum strength. The inner surface has been polished to reduce friction, improve efficiency and prevent excessive wear and tear when using strong springs.

Compatibility-wise, this part set is only for the CYMA CM.700 and CM.708 series of spring-powered sniper rifles and is unlikely to work with other brands and models. As always, we only recommend upgrade parts like this for those with experience or the patience and willingness to learn. If you plan to install a super strong spring into your CM.700 or CM.708, this set should give it the strength it needs to last a lifetime!

A highly convincing full metal 5.45x39mm AK variant electric Airsoft gun which is built to a realistic standard, and combines modern Polymer aesthetic with an old school folding skeleton stock.

If you have a thing for modernised AKs, you'll love this! The CYMA Platinum SLR Airsoft Works AK-105 AEG is absolutely packed with pre-upgraded parts and is officially licenced by SLR Rifleworks with detailed replicas of SLR parts across the design. Boasting the incredible CYMA Platinum E-EDITION High Speed internals, this AK-105 is absolutely devasting in-game and to make matters all the sweeter is equipped with an internal tracer unit mounted to the HOP-up and powered by the AEG's battery.

This means you can light the enemy up with tracer BBs without adding any extra length or weight to your gun, adding in a rare innovation usually only found on the aftermarket and requiring a certain amount of expertise to wire in. An impressive feature made even better in combination with the AK-105's other upgraded parts and flawless build quality. The SLR AK-105 boasts full metal construction with a large proportion of steel in the build, a 6.03mm tightbore inner barrel, high torque Neodymium magnet motor and much, much more!

Whether this is your first AK AEG or you are adding to a collection of AKs, the CYMA SLR AK-105 is a solid choice with great performance and the party trick of lighting up tracer BBs with no need for an aftermarket tracer unit!

Looking for a MK18 Airsoft AEG? Who isn't these days? As the rifle of choice for US Special Forces the MK18 has been immensely popular amongst both Milsim skirmishers due to its authenticity and more casual skirmishers who appreciate the MK18s practical feature set and aggressive looks. 

The CYMA CM.105 is a fully licenced replica from the CYMA Platinum series, sporting pre-upgraded internals with a high speed motor, tight bore inner barrel and ETU/MOSFET to regulate cycling and offer battery protection. The CM.105 differs from other Platinum AEGs with its official licencing from Daniel Defense through EMG in the US. This allows CYMA to add beautifully engraved authentic trademarks and a licenced DD MK18 rail system to their already impressive Platinum setup for what might be the ultimate AEG MK18!

Looking for a mid-ranged, SF-approved AEG rifle? The CM.105 is a full metal AEG with official licensing from Daniel Defense through Evike Manufacturing Group (EMG). This means it comes with perfectly engraved and absolutely authentic Daniel Defense trademarks on the magazine well, a licensed MK18 MOD1 style quad 20mm Rail System, and even more DD markings laser engraved into the side of the upper receiver. The CM.105 isn't just a looker, it also sports the same spritely rate of fire and trigger response as other AEGs in the CYMA Platinum lineup thanks to its high speed motor, and pre-installed ETU/MOSFET. This AEG looks the part, and shoots fantastically, so what are you waiting for?

If you are an SR25 AEG owner you perhaps feel left out, with all the 5.56mm style AR users out there sporting affordable, robust, and stylish polymer magazines. Fortunately, Battleaxe saw fit to provide some of that hard wearing polymer goodness for our friends using the M4/AR15's big brother!

This charger is a replacement original CYMA part intended to charge the mini LiPo batteries supplied with their MOSFET AEP series. The charger plugs into a USB port/USB plug socket and charges the battery through a 3 pin balance port.