Airsoft Flashlights & Torches

If you fancy using your pistol as a primary weapon for CQB, a tactical flashlight is a great way to gain an advantage when it comes to clearing rooms and lighting up the enemy in dark areas. The X300 Tactical Pistol Light from WADSN provides a mighty 400 lumens to brighten up the day of the enemy team as you send them back to regen! This flashlight comes with multiple mounting options, including a universal Picatinny and pistol optimised QD mount and a fixed mount for either rail option. 

A small LED powered Light designed for use as a marking device to donate Locations and Team Colours for Identification. The Body of the Light is constructed from Polymer, with a Gel encased LED Light, making it waterproof.

A small LED powered Light designed for use as a marking device to donate Locations and Team Colours for Identification. The Body of the Light is constructed from Polymer, with a Gel encased LED Light, making it waterproof.

A small LED powered Light designed for use as a marking device to donate Locations and Team Colours for Identification. The Body of the Light is constructed from Polymer, with a Gel encased LED Light, making it waterproof.

If you are in need of a compact tactical flashlight for a short-barreled rifle or SMG setup an M300 pattern light is one of the best options out there. This variant, the WADSN M300 Scout Tactical Flashlight w/Diffuser Cover uses an M300 light body coupled with a specialised head with a built-in diffuser cover which can be quickly flipped out of the way when not needed.

The diffuser is designed to spread the light throw out to more effectively distract and disorient enemy players when entering a room and flipping it aside will narrow the beam for long range engagements. Being based on an M300 scout light body means you can use alternative scout light mounts, tail caps and other scout light accessories to set it up to suit you perfectly.

If you need an easy way to avoid blue-on-blue situations in the dark confines of CQB or urban skirmishes, this affordable helmet marker light from FMA should stop your mates from shooting you! This light offers a simple red flash mode which can be activated by pressing the centre of the light and turned off again in the same way.

The backing of the light is constructed from high density polymer to keep it rigid and the front is constructed from transparent rubber. The Helmet Marker Light is designed to be mounted to an Airsoft helmet and comes packaged with a pair of adhesive velcro strips, one female velcro and one male velcro so you can slap it on your lid easily right away!

If you need an easy way to avoid blue-on-blue situations in the dark confines of CQB or urban skirmishes, this affordable helmet marker light from FMA should stop your mates from shooting you! This light offers a simple red flash mode which can be activated by pressing the centre of the light and turned off again in the same way.

The backing of the light is constructed from high density polymer to keep it rigid and the front is constructed from transparent rubber. The Helmet Marker Light is designed to be mounted to an Airsoft helmet and comes packaged with a pair of adhesive velcro strips, one female velcro and one male velcro so you can slap it on your lid easily right away!

If you want to add a tactical flashlight to your Airsoft pistol, the NUPROL NX200 would be a fine choice. The NX200 is constructed from alloy, and sports a bright CREE LED with 200 Lumens output. 

The NX200 has a 20mm Picatinny rail mount built into the body, offering quick mounting and removing without the need for tools, and has a built in ambidextrous "rocker" switch, which offers both momentary and constant-on for both left and right-handed shooters. The rocker switch is placed perfectly to be activated with either the tip of your trigger finger, or your reaction hand thumb, making the NX200 remarkably intuitive to use, and easy to become proficient with. If you want to take your pistol game to the next level, the NX200 will get you there! 

Please Note: The Colour of the bronze variant has changed in our most recent batch, it is now much lighter than the images show. Please refer to the colour swatch in the "Specification" section for a more accurate representation of the new "Light Bronze" finish. Product Images will be updated shortly. 

If you are looking for a lightweight tactical flashlight with more of an integral look, the WADSN WML should fit the bill! The sleek design of the WML keeps the light tight into your weapon to minimise snags and its integral switch makes it great for compact weapons with less rail space. The WML is designed with a wide variety of modes to choose from, and an integral Picatinny mount with spring loading to guarantee a tighter fit even on off-spec rails. This flashlight provides both momentary and constant on, as well as a stroboscopic mode to dazzle the enemy and give you a few extra moments to get the kill as you clear rooms in CQB.

For a more robust and thick lighting solution, the K-2P is for those of you with more Russian inclined loadouts. Constructed from full alloy, the torch shines at a brilliant 800 lumens and is powered by 2 x CR123A batteries.

The torch is easily attached to your AK rail or 20mm Picatinny system and includes a remote pressure switch, which again can be easily attached to a rail right out of the box. Another inclusion is the offset mount, which allows you to forward mount your torch on the bottom rail to avoid casting a shadow if you are using a suppressor.

For those who use a pistol as a primary weapon; this would be perfect for your setup! The NUPROL NX400 hybridizes the NX300 tactical pistol flashlight with a red aiming laser which is fully adjustable and can be zeroed effectively thanks to the revised NX400 mount which is machined as part of the body and attaches to your rails using a robust steel thumb screw. The NX400 uses the same intuitive activation switch found on the NX300 and NX200 flashlights but has a spicier 400-lumen CREE LED and a red aiming laser which can be used together with the white light LED or on its own, with the white light locked off for more stealthy work.

The NX400 squeezes a lot of functionality into a compact package and would be perfect for an "offensive handgun" or primary pistol, but can also be used on rifles, and will be particularly well suited to those with a compact front end and limited rail space. 

A Tail Switch unit designed to replace the existing Push button on the back of Big Dragon SF G2 Style T6 Torches. The tail switch is constructed from polymer with a Soft Rubber coated tail switch.

For those looking for the ultimate low profile pistol torch, stop searching! You've found it, powered by a single AAA battery you can dazzle your targets for hours without having excessive weight and bulk at the front of your Airsoft pistol.

If you want to add the elite look to your primary weapon but your local site bans lasers, the WADSN DBAL Mini style Tactical Flashlight was made with you in mind! This device is styled after the real steel DBAL Mini but instead of a laser, the device houses an ultra-bright tactical flashlight inside its front aperture.

The device offers several modes of operation, including low power mode for navigation and stroboscopic mode for distraction and disorientation, and mounts to your primary via a QD mount for 20mm Picatinny rails so you can easily switch between platforms without needing tools. The compact size of this unit makes it perfect for smaller SMGs and rifles, saving you rail space and offering similar functionality to a Scout tactical flashlight but with more modes to choose from and full compatibility with aftermarket 2.5mm pressure switches, dual pressure switches and hot buttons.

If you are looking for that last small item to give your helmet/kit setup some added flair, check out the Signal light from FMA. This light can be attached to either velcro or a MOLLE rig and comes complete with a wireless charging kit, MOLLE mount, helmet mount and Velcro.

If you're ready to style up your primary with an elite look, the WADSN PEQ-15 LA5; Red Laser/White Light Version will get you there! Based on the real steel PEQ-15 LA5 laser aiming device, this low-cost alternative from WADSN offers all the functionality you'll need for Airsoft and provides the "Special Forces" look as a bonus.

This version of the WADSN PEQ-15 LA5 operates primarily through the included pressure switch (2.5mm PEQ/DBAL jack), with the activation button on the top of the unit allowing you to scroll between activation modes. Available modes include white light only, red laser only, white light and red laser, and white light stroboscopic. Once you've selected your mode using the activation button, the pressure switch will turn the PEQ on in your chosen mode and turn off again when you let go of the switch.

The set includes a set of realistic PEQ-15 warning stickers and a section of 3M self-adhesive Velcro to mount the included pressure switch and is supplied in a hard polymer storage case with wave foam to keep your PEQ secure when not in use. If you want your primary to look the mutt's nuts, the WADSN PEQ-15 LA5; Red Laser/White Light Version will do just that!

If you have a small gun but a big need for illumination, or if you want the latest compact, high speed PEQ style laser unit, the DBAL-A2 from WADSN may be what you have been looking for! With more functions than the space shuttle and a compact lightweight form, you need your excuses ready to not want this on your primary!

If you are in the market for a compact and lightweight flashlight, then look no further! The M300B Scout Light; Single Switch Version is a superb choice for skirmishers who fear what hides in the dark, or more specifically, who may hide in the dark. This flashlight comes in two colour variants so you can match it with your loadout to keep everything looking uniform, very tactical!

The flashlight mounts onto the common Picatinny rail using its 20mm rail mount. This means it can be attached on most standard platforms without the need for rail adapters. Keep your operations illuminated with the WADSN M300B Scout Light; Single Switch Version!

For CQB, and for low light situations, there is no greater helping hand in the field than a tactical flashlight. The M340A Scout Light Pro from WADSN is the latest variant of their M3xx mini scout light series and comes complete with a low profile, angle adjustable mount for 20mm Picatinny rails, an angle adjustable M-LOK/KeyMod mount, and both the push button tail cap and the pressure switch tail cap. This light reportedly pumps out 540 lumens and literally turns night into day with its dazzling brightness!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

The DBAL-PL is the absolute pinnacle of pistol torches, offering the kind of functionality most Airsofters will never need, but all of them want! The DBAL-PL from WADSN provides a red aiming laser, a white LED light, and both an infrared laser and infrared illuminator all in one unit! The DBAL-PL is designed for use on pistols, but also looks awesome and functions perfectly when mounted to the lower rail of an assault rifle or submachine gun setup. If you own real NODs(lucky!) or any form of night vision and intend to use it for skirmishing, only a DBAL-PL will do it justice!

The DBAL-PL is the absolute pinnacle of pistol torches, offering the kind of functionality most Airsofters will never need, but all of them want! The DBAL-PL from WADSN provides a red aiming laser, a white LED light, and both an infrared laser and infrared illuminator all in one unit! The DBAL-PL is designed for use on pistols, but also looks awesome and functions perfectly when mounted to the lower rail of an assault rifle or submachine gun setup. If you own real NODs(lucky!) or any form of night vision and intend to use it for skirmishing, only a DBAL-PL will do it justice!

If you are looking for a lightweight tactical flashlight with more of an integral look, the WADSN WML should fit the bill! The sleek design of the WML keeps the light tight into your weapon to minimise snags and its integral switch makes it great for compact weapons with less rail space. The WML is designed with a wide variety of modes to choose from, and an integral Picatinny mount with spring loading to guarantee a tighter fit even on off-spec rails. This flashlight provides both momentary and constant on, as well as a stroboscopic mode to dazzle the enemy and give you a few extra moments to get the kill as you clear rooms in CQB.

If you need something to dazzle your opponents on the battlefield, there isn't a better choice than this! The Vaide Scrapper Pistol Flashlight w/ Strobe mounts straight onto to 20mm Picatinny rails, whether that be on your pistol, SMG or other Airsoft platform. It is constructed from aluminium with a steel mounting bolt, keeping the weight low but ensuring the steel mounting bolt is strong enough to keep this flashlight attached to your platform.

There are three different brightness options, ranging from 40 to 500 lumens, so depending on how nice you are feeling on a skirmish day, you can really daze some opponents with this flashlight! It also features a rechargeable battery which uses a magnetic connector, so you don't need to keep spending money on batteries, because as you can imagine, 500 Lumens sucks the juice out of batteries rather rapidly.

The M322 Scout Tactical Flashlight is a modern LED torch with RM45 offset mount for Picatinny 20 mm rail. This flashlight produces a fantastic 280 lumens from 1x CR123 battery, made possible due to the modern CRE2 LED bulb installed.

An advantage of this torch over similar models is that it comes with 2 switches that can be used in tandem, thank to the dual function tail cap. It features a constant on push button in addition to a lead-attached pressure switch . This means that you don't have to unscrew one to get to the other, like in some other flashlight models.

Another feature unique to this torch is the mount, in that it is an offset mount that allows it to be mounted closer to the handguard for a slick overall platform.