New Airsoft Guns & Products

If a lightweight, low-cost M4 AEG with a practical and tactical feature set is on your to buy list, the S&T M4/AR-15 URX4 9.5" Sports Line AEG; ETU Version fits the bill! Made from strong high density polymer with an alloy outer barrel and a mix of alloy and steel trim parts, the URX4 9.5" AEG is extremely fast to point and easy to move with, rocking an M-LOK handguard and 20mm railed receiver, ready to be dressed up with accessories.

On the inside, the S&T URX4 9.5" features an alloy version 2 gearbox with a modern Rotary HOP-up unit, setting it up to be competitive and upgrade-compatible without overcomplicating things by reinventing the wheel. The inner barrel is also a 6.02mm tightbore example, promising above-average accuracy potential when used with high-quality BBs. This updated version now also features an in-line MOSFET and low-resistance wiring, giving it improved electrical efficiency and a super snappy trigger response in semi-auto.

Ideal for mobile playstyles and new skirmishers with limited physical strength, the S&T M4/AR-15 URX4 9.5" Sports Line AEG; ETU Version really brings the heat to the low-cost AEG market. If you like to move fast and maintain high energy throughout the skirmish day, the S&T URX4 9.5" Sports Line is your ideal primary!

If you prefer the low weight and scratch resistance of a polymer receiver but need something a cut above cheap beginner AEGs, the Specna Arms SA-C10 CORE™ Gen.2 M4/AR-15 AEG is ideal. A CQB optimised build made from high-density polymer with an alloy outer barrel and CNC aluminium handguard, the SA-C10 has been revamped to "Gen.2" internal standards, meaning more bang for your buck than ever before!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're put off the PRIME™ series due to its hefty metal build and want top-notch performance in a lightweight build, the Specna Arms SA-C10 CORE™ Gen.2 M4/AR-15 AEG was made with you in mind! 

If you prefer the low weight and scratch resistance of a polymer receiver but need something a cut above cheap beginner AEGs, the Specna Arms SA-C10 CORE™ Gen.2 M4/AR-15 AEG is ideal. A CQB optimised build made from high-density polymer with an alloy outer barrel and CNC aluminium handguard, the SA-C10 has been revamped to "Gen.2" internal standards, meaning more bang for your buck than ever before!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're put off the PRIME™ series due to its hefty metal build and want top-notch performance in a lightweight build, the Specna Arms SA-C10 CORE™ Gen.2 M4/AR-15 AEG was made with you in mind! 

Move fast and hit hard indoors or out with the ARCTURUS LWT MK-I M4/AR-15 CQB 10" AEG; SE™ MOSFET. Made from strong PA66 Nylon polymer for a perfect combination of strength and low weight, the MK-I M4/AR-15 may be cheap, but its 6.03mm tightbore barrel, pre-installed SE™ programmable MOSFET and high torque motor make it a rival for platforms twice its price!

If you dream of a DMR build which doesn't make your arms burn, the EMG Barrett REC10® AEG; Kestrel Basic ETU is the base platform you need! Made from strong high density polymer and bristling with licensed Barrett trademarks, the REC10® is the REC7's big brother, feeding from 7.62x51mm style magazines for that beastly DMR look.

The REC10® is internally based on the version 2 long gearbox, offering larger air volume than a standard V2 to cope with longer barrel lengths. The inner barrel is a 6.03mm tightbore example, enhancing efficiency and providing an accuracy edge with high-grade BBs. Also inside is the Kestrel Basic MOSFET/ETU from EShooter, offering programmable options such as adjustable pre-cocking, 3-round burst and binary trigger, along with a host of quality of life improvements.

A cutting-edge AR-10 platform currently serving with the Israeli Special Forces in real steel form, the EMG REC10® makes a great base platform for a DMR build, especially for those with a mobile playstyle. If you're into DMRs but don't want a primary which weighs 6KG when kitted out, the EMG Barrett REC10® AEG; Kestrel Basic ETU is the perfect starting point for your build!

If you dream of a DMR build which doesn't make your arms burn, the EMG Barrett REC10® AEG; Kestrel Basic ETU is the base platform you need! Made from strong high density polymer and bristling with licensed Barrett trademarks, the REC10® is the REC7's big brother, feeding from 7.62x51mm style magazines for that beastly DMR look.

The REC10® is internally based on the version 2 long gearbox, offering larger air volume than a standard V2 to cope with longer barrel lengths. The inner barrel is a 6.03mm tightbore example, enhancing efficiency and providing an accuracy edge with high-grade BBs. Also inside is the Kestrel Basic MOSFET/ETU from EShooter, offering programmable options such as adjustable pre-cocking, 3-round burst and binary trigger, along with a host of quality of life improvements.

A cutting-edge AR-10 platform currently serving with the Israeli Special Forces in real steel form, the EMG REC10® makes a great base platform for a DMR build, especially for those with a mobile playstyle. If you're into DMRs but don't want a primary which weighs 6KG when kitted out, the EMG Barrett REC10® AEG; Kestrel Basic ETU is the perfect starting point for your build!

If you're upgrading your AK-47/74 AEG, the FPS Softair ERGAL Air Nozzle with Inner O-Ring for AK-47/74 AEG is an essential part! Made from super-strong CNC-machined ERGAL, this nozzle is about as strong as AEG nozzles get, ideal for high-performance builds intended to last.

ERGAL is the trade name for 7075 aluminium alloy, known for its exceptional strength and low weight, rivalling some steels in strength while staying light as a feather by comparison. This nozzle also features an internal O-ring designed to minimise air leaks for maximum consistency and ensure the nozzle stays perfectly aligned for reliable feeding with every shot. If you need a super strong nozzle for a high-performance AK AEG build, you won't find any better than the FPS Softair ERGAL Air Nozzle with Inner O-Ring!

If you've got broken Maten magazines, this should help! The PTS Syndicate Enhanced Feed Lips for EPM-LR GBB Magazine; Part [483] are made from strong high density polymer, made even stronger with their enhanced design intended to reduce weak points in the original EPM-LR GBBR magazine's feed lips, along with improving feeding reliability.

These feed lips are strictly for the .308-style EPM-LR GBBR magazine supplied with the PTS Syndicate Mega Arms MML .308 MATEN GBBR and won't work with 5.56-style EPM GBBR mag. If you've got a pile of Maten mags which need feed lips, treat them to PTS Syndicate Enhanced Feed Lips for EPM-LR GBB Magazine; Part [483]!

If you're looking for a battery for a top-wired AK setup or an SMG-5K, this is the one! The Giant Power 7.4V 1300mAh 25C LiPo Slim Stick Battery is ideal for long, slim battery compartments, measuring approximately 18cm x 0.8cm x 1.6cm with a 5cm wire length, and is pre-wired to a Deans/T-plug connector. 

This 7.4V LiPo consists of 2 cells bound together into a single cell group, with a 25C continuous discharge rate and a capacity of 1300mAh. 

If you want stealthy styling for your SSG96 sniper rifle, this is the adapter you need! Constructed from aluminium and providing 14mm CCW male barrel threading at the tip, this suppressor adapter fits both the SSG96 MK1 and SSG96 MK2, allowing tracer units, suppressors or alternative muzzle devices to be mounted with ease.

To install the adapter, simply unscrew the front cap from your barrel and screw the adapter on in its place. You're now ready to go silent with your SSG96!

This is the smallest Airsoft MOSFET on the market! It grants you a better rate of fire and trigger response, as well as protecting the mechanical trigger contacts in your AEG, as electrical currents bypass them and go straight to the motor. The MOSFET is so compact that it can be fitted to pretty much any Airsoft AEG.

It attaches to the wiring of your gun and will require some expert knowledge and skills to fit. Make sure you know what you're doing before installation! Also included in the package is a heat shrink, so you can keep this MOSFET safe after you have installed it.

If you're after a slim stick battery for a top-wired AK, the Giant Power 11.1V 1500mAh 25C LiPo Slim Stick Battery will do the trick! Ideal for slim and long battery compartments in top-wired AK replicas, this LiPo battery measures approximately 16.5cm x 1.5cm x 1.6cm, with a 5cm wire length, and is pre-wired to a Deans/T-plug battery connector. This battery can also be used in M16A1 or A2 fixed stocks and AR buffer tubes, though you will be unable to collapse the stock when installed in a standard buffer tube. 

Please note: 11.1V LiPo batteries can cause pre-engagement in AEGs at UK power levels. This can result in internal damage. Please ensure you only use 11.1V batteries in AEGs designed for them (see "Specifications" on our AEG product pages for battery recommendations). 

Snaggy stocks slowing you down? The Airsoft Artisan 1913/20mm Picatinny MCX Triangle Folding Stock will cure that! Designed to eliminate gear and sling snags through its triangular profile, this stock is built to a phenomenal standard using CNC-machined aluminium with a robust steel hinge/mount and grippy rubber butt plate for all-weather functionality.

Designed to mount to any 1913/20mm Picatinny stock interface, including stock adapters and those found on MPX, MCX and the shorter VMP-2 variants, this stock is as simple to operate as it is robust, with no fiddly buttons to operate the folding mech. Simply brace your thumb on the rear of your platform and lift the stock up, and you can effortlessly fold it to the left side. To redeploy the stock, the process is the same; it really is that simple!

With an ultra-light skeletonised design, QD sling sockets built in and the option to add a cheek riser for a more consistent sight picture, this stock packs a lot of enhancements into a highly functional, no-frills design. If you're after a sleek 1913/20mm stock option with next-level build quality, the Airsoft Artisan 1913/20mm Picatinny MCX Triangle Folding Stock belongs on your build!

If you need an ultra-compact SMG for kissing distance engagements, the Evolution Reaper XS EMR AR-9 PDW AEG; ETS II ETU has your back. A rock-solid build making use of a CNC-machined aluminium handguard and buffer tube with an alloy outer barrel and Carbontech™ engineering polymer receiver, the Reaper is as strong as it is light, with realistic weight distribution and plenty of accessory options built in.

Inside, the Reaper XS EMR is well-equipped, featuring a TM-spec V2 gearbox with 18:1 steel gears running on 8mm oil-less steel bushings, a polymer piston with a steel tooth rack, a quick-change spring guide, and a sector gear delayer to maintain reliable feeding at high speeds. Also inside is a 6.01mm tightbore inner barrel, which boosts air efficiency and accuracy along with the ETS II programmable MOSFET/ETU, offering a wealth of programmable fire mode options while keeping your gearbox running at maximum efficiency.

This, the Reaper XS, is the shortest of the bunch, ideal for CQB sites or running as a sniper's backup, giving you competitive performance in a more compact package. If you need a platform to deal with tight turns without slowing you down, the Evolution Reaper XS EMR AR-9 PDW AEG; ETS II ETU suits your needs perfectly!

If you're building out your MP5/SMG-5 AEG for high performance, the FPS Softair ERGAL Air Nozzle with Inner O-Ring for MP5/SMG-5 AEG will ensure it's reliable and accurate! Made from super-strong CNC-machined ERGAL, this nozzle is about as strong as AEG nozzles get, ideal for high-performance builds intended to last.

ERGAL is the trade name for 7075 aluminium alloy, known for its exceptional strength and low weight, rivalling some steels in strength while staying light as a feather by comparison. This nozzle also features an internal O-ring designed to minimise air leaks for maximum consistency and ensure the nozzle stays perfectly aligned for reliable feeding with every shot. If you need a super strong nozzle for a beastly MP5/SMG-5 AEG build, the FPS Softair ERGAL Air Nozzle with Inner O-Ring is the way to go!

Designed to improve conductivity for a boost in rate of fire and trigger response, FPS Softair Low Resistance Wiring is ideal for custom builders seeking the slickest, most efficient setup possible. This wiring is supplied in a 2-meter length and is 1.7mm in diameter, making it ideal for AEG wiring, even in setups with relatively small wiring routes. If you're the techy type, FPS Softair Low Resistance Wiring should be in your parts stash!

If you need better accuracy from your LCT AK AEG, this should do it! The LCT Rotary Hop Unit for AK AEG is designed for LCT AK replicas (LCK range) but may fit other brands, though we cannot guarantee off-brand compatibility currently.

This new HOP-up design brings the rotary adjuster style to the AK platform, offering reduced side-to-side shot deviation, improved setting retention, and finer adjustment increments. Like the original slider unit, this rotary accepts standard TM AEG spec HOP-up buckings, nubs and inner barrels.

If you're after a flat nunchuck, aka butterfly battery for an AR-36 or M4A1 polymer handguard, the Giant Power 11.1v 1500mAh 25C LiPo Flat Nunchuck Battery is ideal. Designed for AR-36 and M4A1 handguards but capable of fitting in various unconventional battery compartments, this LiPo battery measures approximately 9.5cm x 2.9cm x 0.6cm (per cell), with a 5cm wire length, and is pre-wired to a Deans/T-plug battery connector. This battery can also be used in M16A1 or A2 fixed stocks, AK fixed stocks or any other platform with a decently sized fixed stock battery compartment. 

Please note: 11.1V LiPo batteries can cause pre-engagement in AEGs at UK power levels. This can result in internal damage. Please ensure you only use 11.1V batteries in AEGs designed for them (see "Specifications" on our AEG product pages for battery recommendations). 

If you need mags for your LCT LK-33 or LK-53, you just found them! The LCT 100rnd Magazine for LK-33/53 AEG [LK004] is a spring-loaded mid-cap magazine which holds approximately 100 BBs, loaded through the fill/feed port on the top of the magazine body. 

The magazine itself is made with a realistic stamped steel shell, polymer internals and a steel feed spring, perfectly matching the shape and appearance of real HK33 25-round magazines when inserted. Compatibility-wise, this magazine is specifically for the LCT LK-33 and LK-53 AEGs, but should also work with the Electric Blowback LCT LK-33/53 variants. 

If you've had motor issues and need a reliable replacement, here you go! The NUPROL High Torque Short Shaft Motor is an upgraded high torque motor for M4/AR-15 AEGs. This is the perfect upgrade part if you want to crank up your trigger response for some snappy semi-auto work or increase torque to handle high-power springs. The set includes a D-type pinion gear and pinion spring, both of which are pre-installed on the motor shaft.

If you're looking for a fresh stock to modernise your MPX or MCX, the Airsoft Artisan 1913/20mm Picatinny Lightweight MCX Folding Stock is a great option. Manufactured to the lofty standards we expect from Airsoft Artisan, the Lightweight MCX stock is made from CNC-machined aluminium with a steel mount/folding mechanism and a grippy rubber butt plate.

Designed to mount to any 1913/20mm Picatinny stock interface, including stock adapters and those found on MPX, MCX and the shorter VMP-2 variants, this stock is as simple to operate as it is robust, with no fiddly buttons to operate the folding mech. Simply brace your thumb on the rear of your platform and lift the stock up, and you can effortlessly fold it to the left side. To redeploy the stock, the process is the same; it really is that simple!

A lightweight alternative to the standard MCX Folding Stock, this stock is significantly skeletonised, with bevelled edges and weight-reducing recesses throughout, along with a pair of M-LOK slots on top for a cheek riser(available separately). Whether you're in search of a stock for your VMP-2C to improve stability or you're after new bits to tart up your gucci MCX build, the Airsoft Artisan 1913/20mm Picatinny Lightweight MCX Folding Stock brings both quality and aesthetics to the table!

If you're seeking a solid starter platform with plenty of upgrade potential down the line, you're in good hands with the S&T M4/AR-15 CQBR Sports Line AEG; ETU Version! This M4 AEG is made predominantly from high-density polymer with an alloy outer barrel and a mix of alloy and steel trim parts, keeping agility at maximum and making it ideal for younger skirmishers or those with less physical strength.

On the inside, the S&T CQBR features an alloy version 2 gearbox with a modern Rotary HOP-up unit, setting it up to be competitive and upgrade-compatible without overcomplicating things by reinventing the wheel. The inner barrel is also a 6.02mm tightbore example, promising above-average accuracy potential when used with high-quality BBs. This updated version now also features an in-line MOSFET and low-resistance wiring, giving it improved electrical efficiency and a super snappy trigger response in semi-auto.

For new skirmishers looking for a platform with easy handling, wide compatibility, upgradable internals and impressive performance as it comes, the S&T M4/AR-15 CQBR Sports Line AEG; ETU Version is a superb option. Even experienced Airsofters accustomed to full metal builds will appreciate this lightweight yet high-quality build!

If you're going for a special forces style loadout but don't have planetoid-sized biceps, the S&T ST416D Sports Line AEG; ETU Version should be right up your street! Constructed almost entirely from high-density polymer, the ST416D is a great choice for those with less physical strength or those with a fast-moving playstyle seeking a platform as agile as they are. High-density polymer may be less realistic, but it will not show damage as readily as a full metal platform might, thanks to its dyed nature, allowing it to maintain its looks far better than a painted or anodised finish.

On the inside, the ST416D features an alloy version 2 gearbox with a modern Rotary HOP-up unit, setting it up to be competitive and upgrade-compatible without overcomplicating things by reinventing the wheel. The inner barrel is also a 6.02mm tightbore example, promising above-average accuracy potential when used with high-quality BBs. This updated version of the ST416D now also features an in-line MOSFET and low-resistance wiring, giving it improved electrical efficiency and a super snappy trigger response in semi-auto.

Having all of these features in such an affordable platform makes the S&T ST416D Sports Line AEG; ETU Version a sure hit for beginners or veterans looking for a lightweight "easy mode" primary!

Sneaky skirmishers, check this out! The Specna Arms SA-C11 CORE™ HAL¹ ETU™ M4/AR-15 AEG is the perfect close-quarters combat AEG, made better than ever in its latest gen.2 form. Featuring a pre-installed suppressor, CNC aluminium handguard and polymer receiver, this Airsoft replica is the perfect companion for those who want to stay light on their feet. Its affordable price point and advanced programmable MOSFET make it an attractive platform for players of any skill level!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Like the original SA-C11, the Gen.2 version also has a polymer piston with a full steel tooth rack, ESA quick change spring system for easy power tuning and a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

Sneaky skirmishers, check this out! The Specna Arms SA-C11 CORE™ HAL¹ ETU™ M4/AR-15 AEG is the perfect close-quarters combat AEG, made better than ever in its latest gen.2 form. Featuring a pre-installed suppressor, CNC aluminium handguard and polymer receiver, this Airsoft replica is the perfect companion for those who want to stay light on their feet. Its affordable price point and advanced programmable MOSFET make it an attractive platform for players of any skill level!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Like the original SA-C11, the Gen.2 version also has a polymer piston with a full steel tooth rack, ESA quick change spring system for easy power tuning and a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

If you're looking for a highly flexible M4/AR-15 platform, the Specna Arms SA-C20 CORE™ HAL¹ ETU™ M4/AR-15 Carbine AEG should suit you perfectly! Kitted out with some glorious externals with a skeletonised M-LOK handguard, crane stock and railed receiver, this M4 is a great choice for any skirmisher! This, the latest version of the SA-C20, has been revamped to "Gen.2" internal standards, meaning more bang for your buck than ever before!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you need a mid-length platform with a high-quality yet lightweight build ready for any challenge on the field, the Specna Arms SA-C20 CORE™ Gen.2 M4/AR-15 AEG is the way to go!

If you're into retro platforms and need something with presence, the S&T Armament M1918A2 BAR AEG fits the bill! An authentic full metal build boasting gorgeous real wood furniture with a beautiful dark finish, this BAR replica is a perfect match for the M1918A2 Browning Automatic Rifle, which served the US Army and Marine Corps throughout World War II and the Korean War until being replaced by the M14 in the early stages of the Vietnam War.

Internally, the BAR uses a unique gearbox shell with a similar shape to the V7 and a unique slider HOP-up adjuster similar to an AK HOP-up. While these parts are unique, the gearbox takes V2/3 spec gears and a V2/3 cylinder head, and the inner barrel, along with all HOP-up components, are TM AEG spec, ready to be tuned to your liking. Being an LMG, the BAR shoots in full-auto only and is remarkably quick in the rate of fire department, closer to a real MG 42 than a real BAR!

If you have an eye for rare, historic platforms or are into WWII reenactment, the S&T M1918A2 BAR will provide the experience you seek with its exceptional build quality and authentic handling. Perfectly suited to a US G.I. loadout but also a great fit for a Clyde Barrow-style 1930s outlaw loadout, the BAR will definitely please any retro firearms fan!

If you're a realism seeker looking for the next step up from an AEG, the WE M4A1 Open Bolt GBBR; V3 System has your name on it! A considerable improvement over the previous WE Open Bolt M4 GBBR, the V3 improves reliability with choice steel internals, reinforcement in key places and a full internal redesign resulting in better rapid fire performance and long-term durability.

The most notable redesigns are its steel valve knocker and steel bolt catch contact surface, solving known issues with WE's previous designs and avoiding the immediate need for upgrades or bodge jobs. The trigger group has also been considerably reinforced, but the inner barrel and HOP-up bucking are still GBB/VSR spec, giving you access to some of the best upgrade parts in the business if you want to improve accuracy and range. The stock inner barrel is also now a 6.04mm tightbore, replacing the 6.08mm standard bore barrel of the previous version.

If you prioritise realism and like to work hard in-game like the real warriors do, the WE M4A1 Open Bolt GBBR; V3 System should be on your shopping list. With realistic 30-round magazines, violent recoil and a manual of arms almost identical to the real M4A1, this is a primary for the pros!

If you're the techy type seeking high-quality MOSFET wiring, FPS Softair has your back with the High Conductivity MOSFET Signal Cable! Made with 19 pure copper capillaries coated in chrome to enhance conductivity, this signal wire is specifically designed to provide maximum efficiency while avoiding being too thick and impinging on gearbox internals. We all know the pain of discovering your pinion gear has shredded your wiring. Thankfully, this FPS Signal Wire sidesteps this issue entirely!

The capillaries are protected with an FEP (Fluorinated Ethylene Propylene) coating, keeping the wire flexible to be routed through tight spaces, ideal for whatever custom setup you have in mind. If you're an ambitious tech with some wild custom build plans, FPS Softair High Conductivity MOSFET Signal Cable will definitely come in handy!

If you're building out your M14 AEG, add the SHS Reinforced Tappet Plate for Version 7 Gearbox to keep it feeding reliably! This reinforced polymer tappet plate is designed for Version 7 gearboxes, making it a sure fit in most M14 AEGs and potentially compatible with other V7 gearbox-equipped designs.

The strong polymer construction of this tappet ensures your platform feeds reliably, even at high speed or in high FPS DMR builds. If you want your M14 to last the ages, this reinforced tappet plate belongs inside!