RIS/RAS Rail & Attachments

If you want to add more rails to your M4/AR-15 AEG without adding more weight, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 will do the trick! This quad 20mm Picatinny railed handguard is styled after the real steel KAC FF RIS, with 7" or 9" length options rocking 20mm Picatinny rails at all points of the clock, ready for your choice of accessories.

Being a free-floated design, this handguard mounts directly to your receiver threads and doesn't come into contact with the barrel, meaning any force applied to the handguard won't negatively affect accuracy. Installation will probably require an M4/AR-15 barrel nut wrench and a certain level of expertise and fitting, though the handguard should fit the vast majority of M4/AR-15 AEG and GBBR platforms. If you're looking for affordable mods or are working on a lightweight polymer sleeper build, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 is ideal!

Constructed by HERA Arms themselves, this foregrip is part of the CQR rifle system but comes as a stand-alone unit and can be attached as an aftermarket part to any rifle with a lower 20mm RIS / RAS Rail. If you just want the ergonomics of the foregrip, but not the stock, then this is for you.

If you're looking for a rail riser for a clearer view down your optic, the PTS Syndicate Unity Tactical FAST 20mm Picatinny Optic Riser; Polymer Version should suit your needs perfectly. This riser is based on the real steel Unity Tactical FAST riser, designed to provide a more natural neck position for improved comfort and faster target acquisition, especially for full-face mask and respirator users. 

Being constructed from high-density polymer makes this version of the PTS Unity Riser around half the price of the original aluminium version while offering the same performance as it pertains to Airsoft. If you're seeking a riser and want something a little more tacticool, the PTS Syndicate Unity Tactical FAST 20mm Picatinny Optic Riser; Polymer Version is exactly that!

A replacement dust cover for the top of CYMA CM.040 AK47 Variant Rifles, designed to add a top 20mm RIS / RAS Rail for the attachment of Sights and Scopes without the use of a Side Scope Mount. 

If you are an AK fan but are getting green-eyed over the M4/AR-15's accessory options, a railed handguard will cure that! The CYMA 20mm Picatinny Railed Handguard for AK AEG is constructed from solid high density polymer and provides 20mm Picatinny rails at the 3, 6, 9 and 12 o'clock positions, ready for 20mm Picatinny accessories.

The side rails are short lengths, ideally designed to mount a tactical flashlight or aiming laser but can also be removed if you prefer slick sides on your handguard. The top rail features 12cm of rail space, allowing for a forward mounted red dot sight to be fitted for that slick PMC look. The bottom rail is 11cm long, providing enough room at the front so you can add a vertical or angled foregrip, or even a bipod if you see fit. The sides of the lower handguard also include ribs for extra grip, similarly to the standard issue AK-10x polymer handguards. If you want to mount your mission essential kit to your AK AEG or GBBR this handguard is one of the cheapest ways to do it!

A Vertical Foregrip designed to be attached onto the Front Handguard of Rifles and Submachine Guns to give the user a more stable grip on the weapon. 

If you are looking for the Special Forces tactical flashlight of choice, you have found it! Or a near-perfect replica of it, that is! The NUPROL NX600 Scout Tactical Flashlight is a close replica of the real world SF Scout light, the tactical flashlight of choice for special forces around the world. The NX600 is designed to be mounted to 20mm Picatinny rails with its integral mount and can be set up with either the push-button tail cap or a pressure switch, both of which are included in the package. Whether you have a need to distract the enemy as you clear rooms, see where you are going in the darkest of dark CQB sites or you just want your primary to really look the part, a scout style flashlight like the NX600 would be an excellent choice! 

A Vertial Foregrip designed to give the user an extra control point on their weapon. The foregrip is constructed from Polymer and is designed to fit 20mm RIS / RAS Rails. 

This High Profile Rail Riser is designed for any 20mm RIS/RAS Accessory, and is designed to lift it up off the Rail. This is particularly useful for those trying to use a Lower Face Mask with a Red Dot Sight, as you might find that you Mask stops you from aiming down your standard Rail System.

If you are the type of Airsofter who loves the latest and greatest mission essential equipment you must have been waiting for this moment! The WADSN ET OGL White Light Illuminator/Aiming Laser; Red & IR is a close replica of a well known real steel laser device and is constructed from CNC aluminium with flawless precision. 

The unit contains a 150-lumen white light illuminator, a red visible aiming laser and an infrared (IR) laser which can be used in various combinations and either with the included Crane jack pressure switch or aftermarket dual switches. Mode selection is provided by a rotary dial on the rear, and the unit requires a single CR123A 3V cell (not included) to function. If your mates are all running PEQ-15 and DBAL units and you want to make them jealous, the OGL will do just that!

If you are the type of Airsofter who loves the latest and greatest mission essential equipment you must have been waiting for this moment! The WADSN ET OGL White Light Illuminator/Aiming Laser; Red & IR is a close replica of a well known real steel laser device and is constructed from CNC aluminium with flawless precision. 

The unit contains a 150-lumen white light illuminator, a red visible aiming laser and an infrared (IR) laser which can be used in various combinations and either with the included Crane jack pressure switch or aftermarket dual switches. Mode selection is provided by a rotary dial on the rear, and the unit requires a single CR123A 3V cell (not included) to function. If your mates are all running PEQ-15 and DBAL units and you want to make them jealous, the OGL will do just that!

If you are looking for the Special Forces tactical flashlight of choice, you have found it! Or a near-perfect replica of it, that is! The NUPROL NX600 Scout Tactical Flashlight - Short is a close replica of the real world SF M300 Scout light, the tactical flashlight of choice for special forces around the world. The NX600 is designed to be mounted to 20mm Picatinny rails with its integral mount and can be set up with either the push-button tail cap or a pressure switch, both of which are included in the package. The "short" version of the Scout Light would be a fantastic choice for a short CQB optimised Airsoft primary, offering all the flexibility of the original Scout in a shorter and lighter package. 

If you are looking for the Special Forces tactical flashlight of choice, you have found it! Or a near-perfect replica of it, that is! The NUPROL NX600 Scout Tactical Flashlight - Short is a close replica of the real world SF M300 Scout light, the tactical flashlight of choice for special forces around the world. The NX600 is designed to be mounted to 20mm Picatinny rails with its integral mount and can be set up with either the push-button tail cap or a pressure switch, both of which are included in the package. The "short" version of the Scout Light would be a fantastic choice for a short CQB optimised Airsoft primary, offering all the flexibility of the original Scout in a shorter and lighter package. 

If you are undecided when it comes to vertical grips and sometimes like the old-school ways, this Folding Vertical Grip from CYMA is ideal for you! Constructed from high density polymer with a steel folding mechanism, the Folding Vertical Grip can be mounted to any 20mm Picatinny rail via its spring-loaded QD mount. 

To mount the grip, simply push the textured end of the locking bar on the mount in and slide it onto the front of your rail. When you release the locking bar, the grip will stay right where it is. To fold and unfold, simply press the central screw-like button and position the grip in either the horizontal or vertical position. 

At the front of the grip, we are treated to a hand stop-like curved protrusion intended to prevent you from slipping off the grip and potentially shooting your hand; a useful feature if you mount this right at the front of a short-barreled platform. If you're looking for an affordable 20mm Picatinny grip solution with plenty of functionality, the CYMA Folding Vertical Grip is one to watch!

WADSN are considered by many to be the gold standard in terms of torches and switches with this modbutton being no exception. The pressure switch is used for remote activation of a flashlight and is constructed from rubber for a tactile feel. The housing attaches easily to a Picatinny rail system, however if you would prefer to attach it to an M-LOK system, WADSN have fortunately included an adaptor, giving you that option.

If you're running your AAP-01 or AAP-01C as a primary, the Action Army Folding Stock Kit for AAP-01 GBB Pistols provides an extra point of contact for improved accuracy and range and looks fantastic as a bonus! This sleek, minimalist folding stock kit is compatible with the AAP-01 and AAP-01C from Action Army, mounting via the hammer housing pin & rear sight. 

The stock offers length of pull adjustment, an adjustable cheek riser and side folding functionality, making it the equivalent of a SCAR or ACR stock but with a far more compact design well suited to the lightening fast AAP-01. Also moulded as part of the stock base we have a 20mm Picatinny optics rail, allowing you to mount a red dot sight or scope to your AAP to enhance its functionality as a primary. 

Steel QD sling sockets are present on either side of the toe of the stock, along with an additional socket beneath the stock mount, ideally placed for single-point slings. If you love the way your AAP-01 shoots but want to extend your effective range and turn it into a mean little carbine, the Action Army Folding Stock Kit for AAP-01 GBB Pistols is what you need to get the job done!

If you are looking for a grip that also converts into a bipod but looking for weight and solid construction then this is for you. 

If you're looking for a sleek handguard for your M4/AR-15 build, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is one to watch. This handguard is CNC machined from aluminium and offers KeyMod negative space attachment slots at the 3, 6, and 9 o'clock positions with 20mm Picatinny rail running along the top, giving you plenty of accessory options to go with its high-speed styling.

Being a free-floated design means this handguard doesn't come into contact with the outer barrel, meaning no negative effects on accuracy regardless of any force applied. Offered in 12.5" or 15" lengths, the KeyMod handguard is ideal for DMR builds and other long-range setups, pairing well with a 14.5 or 16-inch barrel.

The set also includes an aluminium barrel nut pre-installed inside the handguard so no need to worry about sourcing the right nut. Naturally, this handguard is only for M4/AR-15 platforms and we recommend using an M4/AR-15 barrel nut wrench for the installation process. If you're working on a carbine-length M4 and want a uniquely sleek handguard, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is ideal!

If you're looking for a sleek handguard for your M4/AR-15 build, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is one to watch. This handguard is CNC machined from aluminium and offers KeyMod negative space attachment slots at the 3, 6, and 9 o'clock positions with 20mm Picatinny rail running along the top, giving you plenty of accessory options to go with its high-speed styling.

Being a free-floated design means this handguard doesn't come into contact with the outer barrel, meaning no negative effects on accuracy regardless of any force applied. Offered in 12.5" or 15" lengths, the KeyMod handguard is ideal for DMR builds and other long-range setups, pairing well with a 14.5 or 16-inch barrel.

The set also includes an aluminium barrel nut pre-installed inside the handguard so no need to worry about sourcing the right nut. Naturally, this handguard is only for M4/AR-15 platforms and we recommend using an M4/AR-15 barrel nut wrench for the installation process. If you're working on a carbine-length M4 and want a uniquely sleek handguard, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is ideal!

If you want a red dot sight on your AKS-74U but aren't a fan of the Russian side rail, 5KU has what you need! The 20mm Rear Sight Rail for AKS-74U AEG/GBBR is designed to mount over the rear iron sight of AKS-74U rifles, both the AEG and GBBR variety, providing a length of 20mm Picatinny rail measuring 8cm approximately. 

The part is constructed from aluminium to provide a great balance of strength and low weight and should fit most AKS-74U Airsoft guns on the market, though some may require slight modification. If you want to mount a red dot sight for faster target acquisition but still want to be able to fold your stock for tight quarters, the 5KU 20mm Rear Sight Rail for AKS-74U AEG/GBBR is the key!

Whether you want to give your AEG a more elite look or you need space for a battery the Big Dragon AN/PEQ-15 Dummy Battery Box will do the trick! This dummy PEQ-15 unit is designed to look exactly like the real thing and has enough space inside to fit a battery measuring approximately 6.5x4.5cm. Included in the set is a set of realistic laser warning stickers for a more realistic look, with various colour schemes available so you can pick your favourite. This battery box mounts to 20mm Picatinny rails and is great for a front-wired AEG setup with limited space inside the handguard.

An Alloy constructed mount for the M14/M1A platform, which secures above the ejection port via the threads on the side of the receiver and allows you to mount 20mm compatible accessories/sights.

This Russian style vertical grip is for those of you that like to hold your rifle the easy way for better stability. The grip features ridged extrusions on the front and back for additional friction and grip, so your hands won't slip.

Constructed from high density polymer, this grip can be mounted to any 20mm Picatinny railed surface, but works best when mounted to a 6 o'clock rail, unless you have an unconventional style! Loosened and tightened by the side nub/bolt to secure in place.

A mock PEQ Box, designed to hold PEQ size Airsoft batteries, but can be extended with the use of an included extension module for larger batteries.

A Multifunction LED flashlight with 3 modes of operation, full power, low power or strobe effect. Can be mounted on most Airsoft guns with 20mm Picatinny rails. The flashlight is powered by 3x AAA batteries (not included) and comes with an integrated 20mm rail mount, a mount for the handlebars of a bike and a belt mount. 

If you are looking for one of the spiciest pistol flashlights we sell, the XH35 from WADSN is up there with its phenomenal 890 lumens output on high power mode! The XH35 is an enhanced pistol flashlight based on the X300 design but with the ability to switch between low and high output mode, and the solid or stroboscopic modes. The XH35 uses the same rocker switch controls as previous X200/300/400 series lights, so there is no need to retrain if you fancy an upgrade!

If you are looking for one of the spiciest pistol flashlights we sell, the XH35 from WADSN is up there with its phenomenal 890 lumens output on high power mode! The XH35 is an enhanced pistol flashlight based on the X300 design but with the ability to switch between low and high output mode, and the solid or stroboscopic modes. The XH35 uses the same rocker switch controls as previous X200/300/400 series lights, so there is no need to retrain if you fancy an upgrade!

A Pair of Modular 20mm RIS accessory rails designed to be fitted on to AR36 Style Handguards allowing the attachment of aftermarket parts and accessories. 

If you are having a hard time seeing down your low-profile red dot sight, a rail riser will make all the difference! The Vector Optics 0.83" 20mm Picatinny Rail Riser Mount is designed to assist those who struggle to see down their red dot sight, either because of a very low profile mount, a full face mask or neck pain.

The riser offers a 4cm length of 20mm Picatinny rail raised 0.83"/2.2cm above the height of the original rail to which it is mounted. Being constructed from aluminium with a steel mounting bolt, this riser keeps added weight to an absolute minimum. Mounting the riser is as simple as mounting your red dot; simply align it with your rail and tighten down the thumb screw on the side. The centre of the riser is also milled out to provide a channel through which the iron sights on certain platforms can still be used which also helps with weight reduction.

If you are having a hard time getting your face low enough to see through your optic, this riser should solve that issue and get you shooting straight!

A Streamlined low profile 20mm RIS Vertical Foregrip with Internal Storage space. Designed by PTS to be the ultimate Dynamic tactical grip, the EPF2- (Enhanced Polymer Foregrip 2) is a revision of PTSs original and highly successful EPF grip, both of which are High-Speed / Low-Drag design, designed to avoid snagging on other equipment or clothing.