Specna Arms Airsoft

If you're after affordable heavy-weight BBs, Specna Arms ONE 0.30g 6mm BIO BBs are a fantastic option. Supplied in a resealable bag containing 1000 BBs approximately, these BBs are made from biodegradable materials, making them great for outdoor target shooting and skirmishing alike.

These slightly heavier than standard BBs provide improved foliage penetration ability and wind resistance along with extended range in guns with upgraded HOP-ups. If you're trying to feed an ammo-hungry LMG without emptying your wallet, Specna Arms ONE 0.30g 6mm BIO BBs are a great way to do it!

If you're after an affordable LiPo charger which won't make you scratch your head, the Specna Arms EASY LiPo Battery Charger is the way to go! A simple balance charger capable of charging both 7.4V and 11.1V LiPo batteries, the EASY charger makes things exactly that, supplied with a UK power supply and with charging status indicated by LEDs on the top of the housing. 

If you're after STANAG-style mid-caps, Specna has just what you need! The Specna Arms 120rnd STANAG Mid-Cap Magazine M4/AR-15 AEGs boast a realistic steel shell and polymer internals with a steel feed spring, holding 120 BBs approximately. To load the mag, we recommend using a speed loader or loading tool; simply align your filled speed loader or loading tool with the feed/fill port and load her up! 

The benefit of mid-caps is their spring-loaded internals, feeding in the same way as a real magazine, which means no battle rattle to give you away. Compatibility-wise, this mag will work in most M4/AR-15, SCAR-L and L85 AEGs, along with other platforms which are M4 AEG mag-compatible. If your loadout requires steel STANAG-style magazines, the Specna Arms 120rnd STANAG Mid-Cap Magazine M4/AR-15 AEGs is the way to go

An Airsoft electric rifle made from Zinc Aluminium and Steel, with a wealth of up-rated internal parts to make a rifle that shoots as great as it looks. Part of Specna's EDGE series, this rifle features an X-ASR MOSFET and quick change spring system as standard.

This LiPo battery from Specna Arms is designed to fit into crane stocks. The battery connects to your AEG via a mini-Tamiya connector and provides 2000mAh capacity with a 15C discharge rating.

The battery is coated with heat shrink to prevent abrasion damage to the cells, and has a wire length of approximately 12cm, allowing some flexibility when squeezing the battery into tight spaces. The Specna Arms 7.4V 2000mAh 15C LiPo Nunchuck/Crane Battery; Tamiya would be great for any Airsoft gun which requires a 7.4V LiPo, but can also be used for other electronics hobbies.

This LiPo battery from Specna Arms is designed to fit into flat and long battery compartments, such as some handguards or crane stocks. The battery connects to your AEG via a Mini-Tamiya connector and provides 1300mAh capacity with a 15C discharge rating.

The battery is coated with heat shrink to prevent abrasion damage to the cells, and has a wire length of approximately 10.5cm, allowing an easier fit into tighter spaces. The Specna Arms 11.1V 1300mAh 15C LiPo Nunchuck Battery; Mini-Tamiya would be great for any Airsoft gun which requires an 11.1V LiPo, but would also be of use for R/C vehicles, Drones or other electronics hobbies.

This tiny Specna Arms 7.4V 1300mAh 30C Micro PEQ LiPo Battery is the best fit for a PEQ box wired gun, such as the Specna Arms SA-H01. It can squeeze into some tight spots, with its dimensions of 6.5x1.5x3.5cm; it will sadly not fit in PDW stocks, but may fit in some SMG and AR36 handguards.

As it is a 7.4V LiPo, it is compatible with almost every Airsoft gun, plus, its Deans-style connector is optimal as most modern Airsoft guns are coming with Deans connectors installed due to its lower electrical resistance when compared with Tamiya connectors. If you need a small battery for your Airsoft platform, the Specna Arms 7.4V 1300mAh 30C Micro PEQ LiPo Battery; Deans could be the best choice for you!

This LiPo battery from Specna Arms is designed to fit into flat and long battery compartments, such as some handguards or crane stocks. The battery connects to your AEG via a Deans connector and provides 2000mAh capacity with a 15C discharge rating.

The battery is coated with heat shrink to prevent abrasion damage to the cells, and has a wire length of approximately 10.5cm, allowing an easier fit into tighter spaces. The Specna Arms 11.1V 2000mAh 15C LiPo Nunchuck Battery; Deans would be great for any Airsoft gun which requires an 11.1V LiPo, but would also be of use for R/C vehicles, Drones or other electronics hobbies.

This rifle is a great budget option, partly resembling the new British military rifle, the L403A1/KS-1. It has a polymer handguard and receiver, keeping the weight low. This is perfect if you are new to Airsoft or prefer a more agile style of gameplay, and a hefty, realistic Airsoft platform will just weigh you down.

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're looking for a beginner AEG which is a cut above the rest, the Specna Arms SA-F03 FLEX™ Gen.2 M4/AR-15 Compact AEG; X-ASR MOSFET is one to watch!

This rifle is a great budget option, partly resembling the new British military rifle, the L403A1/KS-1. It has a polymer handguard and receiver, keeping the weight low. This is perfect if you are new to Airsoft or prefer a more agile style of gameplay, and a hefty, realistic Airsoft platform will just weigh you down.

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're looking for a beginner AEG which is a cut above the rest, the Specna Arms SA-F03 FLEX™ Gen.2 M4/AR-15 Compact AEG; X-ASR MOSFET is one to watch!

If you're a fan of the US Army M4A1 look, the Specna Arms SA-P03 PRIME™ M4A1 Carbine AEG should suit you perfectly! Taking the classic M4A1 shape, Specna Arms has given this beastly full metal build internals to match its external quality, including a powerful Dark Mattery brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings, a reinforced tappet plate for reliable feeding and plenty more!

The PRIME™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth™ MOSFET or the HAL™ MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL™ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you're looking for a highly modular primary with a military aesthetic, a hefty full metal build and pre-upgraded internals to rival the best, you've just found what you need! The Specna Arms SA-P03 PRIME™ M4A1 Carbine AEG is about the best an M4A1 AEG can get in this price range, miles ahead of its rivals!

If you're after a high-performance primary with a militant aesthetic, check out the Specna Arms SA-P04 PRIME™ M4A1 CQBR AEG! Equipped with some of the best internals we've ever seen in an out-of-the-box AEG, the SA-P04 boasts a powerful Dark Matter brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings, a reinforced tappet plate, and much, much more!

The Prime™ is Specna's newest line of AEGs, taking its traditional AEG silhouettes and stripping away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II Bluetooth™ MOSFET or the HAL™ MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL™ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you're into the classic M4A1 look and want the best internals an out-of-the-box AEG can hope for, Specna Arms has your six with the SA-P04 PRIME™ M4A1 CQBR AEG. A beast in terms of both build quality and performance, the SA-P04 is the ideal base for any military-style custom build!

If you're looking for a modern M4/AR-15 platform with internals to rival the best, the Specna Arms SA-P07 PRIME™ M4/AR-15 KeyMod AEG should be in your sights. Taking traditional AEG silhouettes, the Specna's PRIME™ range boasts a full internal overhaul, equipped with some of the best parts available in a stock AEG. These improvements include the Magnus TDC HOP-up chamber paired with the Helium HOP-up bucking, 16:1 CNC Steel gears and the powerful Dark Matter Brushless motor, to name but a few!

The highlight of this AEG is the option to choose either the Gate ASTER II™ Bluetooth MOSFET or the HAL™ MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

Fitted with a sound-amplifying muzzle device inset into its CNC aluminium KeyMod handguard, the SA-P07 brings sleek, dynamic looks to the table along with a menacing firing sound to keep the enemy at bay. If you're after a pre-upgraded AEG with as much bark as it has bite, the Specna Arms SA-P07 PRIME™ M4/AR-15 KeyMod AEG deserves your attention!

If you're looking for a modern M4/AR-15 platform with internals to rival the best, the Specna Arms SA-P07 PRIME™ M4/AR-15 KeyMod AEG should be in your sights. Taking traditional AEG silhouettes, the Specna's PRIME™ range boasts a full internal overhaul, equipped with some of the best parts available in a stock AEG. These improvements include the Magnus TDC HOP-up chamber paired with the Helium HOP-up bucking, 16:1 CNC Steel gears and the powerful Dark Matter Brushless motor, to name but a few!

The highlight of this AEG is the option to choose either the Gate ASTER II™ Bluetooth MOSFET or the HAL™ MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

Fitted with a sound-amplifying muzzle device inset into its CNC aluminium KeyMod handguard, the SA-P07 brings sleek, dynamic looks to the table along with a menacing firing sound to keep the enemy at bay. If you're after a pre-upgraded AEG with as much bark as it has bite, the Specna Arms SA-P07 PRIME™ M4/AR-15 KeyMod AEG deserves your attention!

If you seek a platform pre-upgraded to the nines which can go anywhere and do anything, your needs have been met with the Specna Arms SA-P20 PRIME™ M4/AR-15 M-LOK AEG! A full metal build with a lightweight skeletonised M-LOK handguard, the SA-P20 is ultra-modern on the outside and kitted out internally with the best feature set we've seen in a mass-produced AEG!

The PRIME™ range is Specna's newest line of AEGs. Taking traditional AEG silhouettes, Specna has revamped the internals with a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II™ Bluetooth MOSFET or the HAL™ MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you're after a full metal platform with the length to compete at long range and the agility to turn and burn up close, the Specna Arms SA-P20 PRIME™ M4/AR-15 M-LOK AEG should be on your shopping list. Upgraded beyond any other mass-produced platform you can buy off the shelf with Specna's ultra-modern full metal externals, the SA-P20 is ready to rock!

This ultra-thin Specna Arms 7.4V 1000mAh 30C Micro PEQ LiPo Battery is perfect for a PEQ box wired gun, such as the Specna Arms SA-H01. It can squeeze into some tight spots, but with its dimensions of 6.5x1x3.5cm, it will sadly not fit in PDW stocks but may fit in some SMG and AR36 handguards.

As it is a 7.4V LiPo, it is compatible with pretty much every Airsoft gun, and its Deans-style connector is optimal as most modern Airsoft guns are coming with Deans connectors installed due to its lower electrical resistance when compared with Tamiya connectors. If you need a teeny tiny battery for something, the Specna Arms 7.4V 1000mAh 30C Micro PEQ LiPo Battery; Deans could be your best shout!

If you're after an AEG which won't need a tech's touch to shoot perfectly, the Specna Arms SA-P14 PRIME™ M4/AR-15 M-LOK AEG is one to watch. The PRIME™ range is Specna's latest and greatest line of AEGs. Taking traditional AEG silhouettes, Specna has revamped the internals with a new set of improved parts to increase performance, consistency and rate of fire. These improvements include the Magnus TDC HOP-up chamber paired with the Helium HOP-up bucking, 16:1 CNC Steel gears and the powerful Dark Matter Brushless motor, to name but a few!

The highlight of this AEG is the option to choose either the Gate ASTER II™ Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you're searching for a full metal AR you don't need to mess with, the Specna Arms SA-P14 PRIME™ M4/AR-15 M-LOK AEG ticks all the boxes! A full metal build which handles like a dream with stock internals rival platforms can only dream about, the SA-P14 is ready to go anywhere and do anything!

Whether you use a Specna Arms M4/AR-15 AEG or need affordable M4 mid-caps to expand your firepower, the 125rnd S-Mag Mid-cap is what you need. This magazine is constructed from high-density polymer with a steel feed spring and is loaded through the fill/feed port at the top of the magazine body, just like other mid-caps.

The S-Mag is compatible with the vast majority of M4/AR-15 AEGs and should also fit most 416, SCAR-L and L85 AEG replicas. Being a mid-cap, this magazine won't give you away with the dreaded battle rattle as you run and is ideal for sneaky skirmishers looking for more capacity!

Whether you use a Specna Arms M4/AR-15 AEG or need affordable M4 mid-caps to expand your firepower, the 125rnd S-Mag Mid-cap is what you need. This magazine is constructed from high-density polymer with a steel feed spring and is loaded through the fill/feed port at the top of the magazine body, just like other mid-caps.

The S-Mag is compatible with the vast majority of M4/AR-15 AEGs and should also fit most 416, SCAR-L and L85 AEG replicas. Being a mid-cap, this magazine won't give you away with the dreaded battle rattle as you run and is ideal for sneaky skirmishers looking for more capacity!

Whether you use a Specna Arms M4/AR-15 AEG or need affordable M4 mid-caps to expand your firepower, the 125rnd S-Mag Mid-cap is what you need. This magazine is constructed from high-density polymer with a steel feed spring and is loaded through the fill/feed port at the top of the magazine body, just like other mid-caps.

The S-Mag is compatible with the vast majority of M4/AR-15 AEGs and should also fit most 416, SCAR-L and L85 AEG replicas. Being a mid-cap, this magazine won't give you away with the dreaded battle rattle as you run and is ideal for sneaky skirmishers looking for more capacity!

If you need to load up on M4/AR-15 mid-caps, the Specna Arms 125rnd S-Mag Mid-Cap Magazine for M4/AR-15 AEG; Set Of 5 is ideal! This great value magazine multipack includes 5 S-Mag Mid-caps holding 125 BBs each, loaded through the fill/feed port at the top of the mag body using a speed loader, as with other mid-caps.

The S-Mag boasts a uniquely modern design, patterned after popular real steel polymer magazines with SA texture on each side to improve grip and wet weather handling. These magazines are known for their robust nature, wide compatibility and low weight and should fit and feed in almost any M4/AR-15 AEG out there, along with other compatible platforms such as 416 AEGs, SCAR-L AEGs and L85 AEGs. If you want to load up on mid-caps in one go, this is one of the best (and most affordable) ways to do it!

If you need to load up on M4/AR-15 mid-caps, the Specna Arms 125rnd S-Mag Mid-Cap Magazine for M4/AR-15 AEG; Set Of 5 is ideal! This great value magazine multipack includes 5 S-Mag Mid-caps holding 125 BBs each, loaded through the fill/feed port at the top of the mag body using a speed loader, as with other mid-caps.

The S-Mag boasts a uniquely modern design, patterned after popular real steel polymer magazines with SA texture on each side to improve grip and wet weather handling. These magazines are known for their robust nature, wide compatibility and low weight and should fit and feed in almost any M4/AR-15 AEG out there, along with other compatible platforms such as 416 AEGs, SCAR-L AEGs and L85 AEGs. If you want to load up on mid-caps in one go, this is one of the best (and most affordable) ways to do it!

If you need to load up on M4/AR-15 mid-caps, the Specna Arms 125rnd S-Mag Mid-Cap Magazine for M4/AR-15 AEG; Set Of 5 is ideal! This great value magazine multipack includes 5 S-Mag Mid-caps holding 125 BBs each, loaded through the fill/feed port at the top of the mag body using a speed loader, as with other mid-caps.

The S-Mag boasts a uniquely modern design, patterned after popular real steel polymer magazines with SA texture on each side to improve grip and wet weather handling. These magazines are known for their robust nature, wide compatibility and low weight and should fit and feed in almost any M4/AR-15 AEG out there, along with other compatible platforms such as 416 AEGs, SCAR-L AEGs and L85 AEGs. If you want to load up on mid-caps in one go, this is one of the best (and most affordable) ways to do it!

Need a battery and a charger for your upgraded AEG? Get both at once with the Specna Arms Set EASY Charger With an 11.1v 1000mAh Battery! This package has everything you need to get started with 11.1V batteries. The balance charger ensures that all your battery's cells are charged equally, it also works for 7.4V batteries.

11.1V batteries should only be used with upgraded platforms, the high voltage and discharge rate can cause excess wear on internal parts inside stock AEGs. However, if your Airsoft rifle is built to take 11.1V batteries you will notice an improved rate of fire, snappier trigger response and possibly even an increase in FPS.

A multi-pack of five High Cap Magazines for AR/M4/M16 Platform Airsoft Replicas. These Magazines are 'S-MAG' type Magazines which are usually included with Specna Arms Airsoft Guns, but in a gorgeous grey colour. They are High Cap Magazines that hold 380rnds each, filled by pouring BBs through the top fill window, and wound at the clockwork wheel on the base.

Whether you're new to Airsoft or you have recently picked up an AR/M4 style Airsoft Gun and want a bulk of Magazines to go with it, this is a great way to get stocked up on necessities.

A multi-pack of five High Cap Magazines for AR/M4/M16 Platform Airsoft Replicas. These Magazines are 'S-MAG' type Magazines which are usually included with Specna Arms Airsoft Guns, but in a gorgeous grey colour. They are High Cap Magazines that hold 380rnds each, filled by pouring BBs through the top fill window, and wound at the clockwork wheel on the base.

Whether you're new to Airsoft or you have recently picked up an AR/M4 style Airsoft Gun and want a bulk of Magazines to go with it, this is a great way to get stocked up on necessities.

A multi-pack of five High Cap Magazines for AR/M4/M16 Platform Airsoft Replicas. These Magazines are 'S-MAG' type Magazines which are usually included with Specna Arms Airsoft Guns, but in a gorgeous grey colour. They are High Cap Magazines that hold 380rnds each, filled by pouring BBs through the top fill window, and wound at the clockwork wheel on the base.

Whether you're new to Airsoft or you have recently picked up an AR/M4 style Airsoft Gun and want a bulk of Magazines to go with it, this is a great way to get stocked up on necessities.

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

A delightfully consistent spring-powered bolt action M40A5 replica from Specna Arms; made to a stunning standard with everything you need you get sniping right out of the box, including 3 x magazines, a bipod and a scope.

A delightfully consistent spring-powered bolt action M40A5 replica from Specna Arms; made to a stunning standard with everything you need you get sniping right out of the box, including 3 x magazines, a bipod and a scope.

A delightfully consistent spring-powered bolt action M40A5 replica from Specna Arms; made to a stunning standard with everything you need you get sniping right out of the box, including 3 x magazines, a bipod and a scope.

A delightfully consistent spring-powered bolt action M40A5 replica from Specna Arms; made to a stunning standard with everything you need you get sniping right out of the box, including 3 x magazines, a bipod and a scope.

Specna Arms has its ear to the ground when it comes to providing players with the performance they need to compete on the modern Airsoft battlefield. As such, Specna have released their successful SA-S02 M40A3 sniper rifle platform in an upgraded form, with a stronger spring averaging between 460 and 480 FPS on 0.2g BBs. This set includes the upgraded SA-S02 sniper rifle, a 3-9x40mm scope, a set of 25mm/1-inch scope rings for 20mm Picatinny rails and 3 magazines, leaving you only the ammunition to fork out for!

Specna Arms has its ear to the ground when it comes to providing players with the performance they need to compete on the modern Airsoft battlefield. As such, Specna have released their successful SA-S02 M40A3 sniper rifle platform in an upgraded form, with a stronger spring averaging between 460 and 480 FPS on 0.2g BBs. This set includes the upgraded SA-S02 sniper rifle, a 3-9x40mm scope, a set of 25mm/1-inch scope rings for 20mm Picatinny rails and 3 magazines, leaving you only the ammunition to fork out for!

Specna Arms has its ear to the ground when it comes to providing players with the performance they need to compete on the modern Airsoft battlefield. As such, Specna have released their successful SA-S02 M40A3 sniper rifle platform in an upgraded form, with a stronger spring averaging between 460 and 480 FPS on 0.2g BBs. This set includes the upgraded SA-S02 sniper rifle, a 3-9x40mm scope, a set of 25mm/1-inch scope rings for 20mm Picatinny rails and 3 magazines, leaving you only the ammunition to fork out for!

Specna Arms has its ear to the ground when it comes to providing players with the performance they need to compete on the modern Airsoft battlefield. As such, Specna have released their successful SA-S02 M40A3 sniper rifle platform in an upgraded form, with a stronger spring averaging between 460 and 480 FPS on 0.2g BBs. This set includes the upgraded SA-S02 sniper rifle, a 3-9x40mm scope, a set of 25mm/1-inch scope rings for 20mm Picatinny rails and 3 magazines, leaving you only the ammunition to fork out for!

If you are into the idea of running a support gun but still want to be able to move around the battlefield, the Specna Arms SA-F249 PARA FLEX™ Machine Gun w/GATE X-ASR should suit you perfectly! This M249 PARA replica shoots like a premium LMG platform but with its polymer externals, the price and weight are cut down drastically!

Whether you are building up a British Army LMG gunner loadout or you just want to increase your in-game firepower, the Specna Arms SA-F249 would be a fine choice. The M249 PARA, also known as the L110A1 Minimi, was designed to provide a man-portable light machine gun optimised for airborne troops and mechanised infantry, boasting a collapsible stock and shortened barrel to facilitate this.

If you want to improve your AEGs accuracy, range and consistency, a barrel upgrade is a great start! The Specna Arms 6.02mm Steel Tightbore Inner Barrel promises to be an improvement even over stock 6.03mm brass tightbore barrels and its stainless steel construction makes it far more rigid and less prone to bends than other brass and aluminium barrels.

This barrel is cut for standard Airsoft AEGs and should fit most of them, though we suggest referring to the product description of your gun to find out what length you need. The standard AEG barrel cuts mean you can use this precision barrel with standard AEG HOP-up buckings, HOP-up nubs and HOP-up units, meaning all your existing parts should fit and plenty of opportunities to pair this barrel with other accuracy upgrades. If accuracy is a priority for you this upgraded barrel is a must!

If you want to improve your AEGs accuracy, range and consistency, a barrel upgrade is a great start! The Specna Arms 6.02mm Steel Tightbore Inner Barrel promises to be an improvement even over stock 6.03mm brass tightbore barrels and its stainless steel construction makes it far more rigid and less prone to bends than other brass and aluminium barrels.

This barrel is cut for standard Airsoft AEGs and should fit most of them, though we suggest referring to the product description of your gun to find out what length you need. The standard AEG barrel cuts mean you can use this precision barrel with standard AEG HOP-up buckings, HOP-up nubs and HOP-up units, meaning all your existing parts should fit and plenty of opportunities to pair this barrel with other accuracy upgrades. If accuracy is a priority for you this upgraded barrel is a must!

If you want to improve your AEGs accuracy, range and consistency, a barrel upgrade is a great start! The Specna Arms 6.02mm Steel Tightbore Inner Barrel promises to be an improvement even over stock 6.03mm brass tightbore barrels and its stainless steel construction makes it far more rigid and less prone to bends than other brass and aluminium barrels.

This barrel is cut for standard Airsoft AEGs and should fit most of them, though we suggest referring to the product description of your gun to find out what length you need. The standard AEG barrel cuts mean you can use this precision barrel with standard AEG HOP-up buckings, HOP-up nubs and HOP-up units, meaning all your existing parts should fit and plenty of opportunities to pair this barrel with other accuracy upgrades. If accuracy is a priority for you this upgraded barrel is a must!

If you want to improve your AEGs accuracy, range and consistency, a barrel upgrade is a great start! The Specna Arms 6.02mm Steel Tightbore Inner Barrel promises to be an improvement even over stock 6.03mm brass tightbore barrels and its stainless steel construction makes it far more rigid and less prone to bends than other brass and aluminium barrels.

This barrel is cut for standard Airsoft AEGs and should fit most of them, though we suggest referring to the product description of your gun to find out what length you need. The standard AEG barrel cuts mean you can use this precision barrel with standard AEG HOP-up buckings, HOP-up nubs and HOP-up units, meaning all your existing parts should fit and plenty of opportunities to pair this barrel with other accuracy upgrades. If accuracy is a priority for you this upgraded barrel is a must!

If you want to improve your AEGs accuracy, range and consistency, a barrel upgrade is a great start! The Specna Arms 6.02mm Steel Tightbore Inner Barrel promises to be an improvement even over stock 6.03mm brass tightbore barrels and its stainless steel construction makes it far more rigid and less prone to bends than other brass and aluminium barrels.

This barrel is cut for standard Airsoft AEGs and should fit most of them, though we suggest referring to the product description of your gun to find out what length you need. The standard AEG barrel cuts mean you can use this precision barrel with standard AEG HOP-up buckings, HOP-up nubs and HOP-up units, meaning all your existing parts should fit and plenty of opportunities to pair this barrel with other accuracy upgrades. If accuracy is a priority for you this upgraded barrel is a must!

If you want to improve your AEGs accuracy, range and consistency, a barrel upgrade is a great start! The Specna Arms 6.02mm Steel Tightbore Inner Barrel promises to be an improvement even over stock 6.03mm brass tightbore barrels and its stainless steel construction makes it far more rigid and less prone to bends than other brass and aluminium barrels.

This barrel is cut for standard Airsoft AEGs and should fit most of them, though we suggest referring to the product description of your gun to find out what length you need. The standard AEG barrel cuts mean you can use this precision barrel with standard AEG HOP-up buckings, HOP-up nubs and HOP-up units, meaning all your existing parts should fit and plenty of opportunities to pair this barrel with other accuracy upgrades. If accuracy is a priority for you this upgraded barrel is a must!

If you want to improve your AEGs accuracy, range and consistency, a barrel upgrade is a great start! The Specna Arms 6.02mm Steel Tightbore Inner Barrel promises to be an improvement even over stock 6.03mm brass tightbore barrels and its stainless steel construction makes it far more rigid and less prone to bends than other brass and aluminium barrels.

This barrel is cut for standard Airsoft AEGs and should fit most of them, though we suggest referring to the product description of your gun to find out what length you need. The standard AEG barrel cuts mean you can use this precision barrel with standard AEG HOP-up buckings, HOP-up nubs and HOP-up units, meaning all your existing parts should fit and plenty of opportunities to pair this barrel with other accuracy upgrades. If accuracy is a priority for you this upgraded barrel is a must!

If you are sick of straps getting entangled and you want an easier and more breathable face protection option, the Specna Arms Low-Profile Balaclava Mesh Mask would be a fine choice. Providing a sweat-wicking, breathable balaclava-style lower face protection with steel mesh reinforcement around the mouth, this mask is ideal for winter skirmishes and intense CQB.

The mask can be worn over the mouth for improved airflow in hotter weather, or can be kept around the neck in outdoor skirmishes and pulled up for close encounters so you can keep your pearly whites intact. If you want to wear it over your nose, simply bend the steel mesh front plate until it fits your face comfortably. If you're looking for a low-profile breathable face mask, the Specna Arms Low-Profile Balaclava Mesh Mask is a great choice.

If you are sick of straps getting entangled and you want an easier and more breathable face protection option, the Specna Arms Low-Profile Balaclava Mesh Mask would be a fine choice. Providing a sweat-wicking, breathable balaclava-style lower face protection with steel mesh reinforcement around the mouth, this mask is ideal for winter skirmishes and intense CQB.

The mask can be worn over the mouth for improved airflow in hotter weather, or can be kept around the neck in outdoor skirmishes and pulled up for close encounters so you can keep your pearly whites intact. If you want to wear it over your nose, simply bend the steel mesh front plate until it fits your face comfortably. If you're looking for a low-profile breathable face mask, the Specna Arms Low-Profile Balaclava Mesh Mask is a great choice.

If you are sick of straps getting entangled and you want an easier and more breathable face protection option, the Specna Arms Low-Profile Balaclava Mesh Mask would be a fine choice. Providing a sweat-wicking, breathable balaclava-style lower face protection with steel mesh reinforcement around the mouth, this mask is ideal for winter skirmishes and intense CQB.

The mask can be worn over the mouth for improved airflow in hotter weather, or can be kept around the neck in outdoor skirmishes and pulled up for close encounters so you can keep your pearly whites intact. If you want to wear it over your nose, simply bend the steel mesh front plate until it fits your face comfortably. If you're looking for a low-profile breathable face mask, the Specna Arms Low-Profile Balaclava Mesh Mask is a great choice.

If you're looking for something to outclass and outperform your opponents, the Specna Arms SA-P19 PRIME™ is exactly that. This AEG has changed the game when it comes to out-of-the-box performance. The internals have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you prefer a rifle that doesn't require a plethora of upgrades before you deem it skirmish-ready then the SA-P19 PRIME™ should be the AEG on your wishlist.

If you're looking for something to outclass and outperform your opponents, the Specna Arms SA-P19 PRIME™ is exactly that. This AEG has changed the game when it comes to out-of-the-box performance. The internals have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you prefer a rifle that doesn't require a plethora of upgrades before you deem it skirmish-ready then the SA-P19 PRIME™ should be the AEG on your wishlist.

If you're looking for something to outclass and outperform your opponents, the Specna Arms SA-P19 PRIME™ is exactly that. This AEG has changed the game when it comes to out-of-the-box performance. The internals have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you prefer a rifle that doesn't require a plethora of upgrades before you deem it skirmish-ready then the SA-P19 PRIME™ should be the AEG on your wishlist.

If you're looking for something to outclass and outperform your opponents, the Specna Arms SA-P19 PRIME™ is exactly that. This AEG has changed the game when it comes to out-of-the-box performance. The internals have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you prefer a rifle that doesn't require a plethora of upgrades before you deem it skirmish-ready then the SA-P19 PRIME™ should be the AEG on your wishlist.

If you've been checking out MK18 AEG platforms, the Specna Arms Daniel Defense® SA-C19 CORE™ HAL ETU™ MK18 M4/AR-15 AEG is a fantastic option to weigh up. This licensed and trademarked MK18 AEG adds an enhanced real steel receiver to the Milspec MK18 mix, providing an iconic design with an added sprinkling of realism from the real steel Daniel Defense® trademarks.

This, the latest SA-C19 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

If you've been checking out MK18 AEG platforms, the Specna Arms Daniel Defense® SA-C19 CORE™ HAL ETU™ MK18 M4/AR-15 AEG is a fantastic option to weigh up. This licensed and trademarked MK18 AEG adds an enhanced real steel receiver to the Milspec MK18 mix, providing an iconic design with an added sprinkling of realism from the real steel Daniel Defense® trademarks.

This, the latest SA-C19 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

A 7.4v rated LiPo Battery for Airsoft Electric Guns, specifically ones that need a compact battery for a small space, such as PDW Stocks and Pistol Grips. The Battery has a 600mAh Capacity and a 20/40C Discharge Rate, as well as having a Mini Tamiya Connector to make it compatible with a huge range of Airsoft Guns. If you need a compact 7.4v LiPo for a Specna Arms PDW or other Airsoft Gun with a tight battery space, then this is the ideal choice.

If you're in search of a lightweight rifle that doesn't compromise on style then you're in luck! The Specna Arms SA-F09 FLEX™ HAL¹ ETU M4/AR-15 AEG is constructed almost entirely from polymer, making it perfect for new skirmishers or veterans looking for something easier on the arms. This version is SA-F09 Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high-density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best-value AEG platforms on the market. Whether you're a new skirmisher looking for a long rifle shape with more features than the average or a veteran looking for some precision with a lightweight DMR-type, the Specna Arms SA-F09 FLEX™ HAL¹ ETU M4/AR-15 AEG will be an asset to you!

If you're in search of a lightweight rifle that doesn't compromise on style then you're in luck! The Specna Arms SA-F09 FLEX™ HAL¹ ETU M4/AR-15 AEG is constructed almost entirely from polymer, making it perfect for new skirmishers or veterans looking for something easier on the arms. This version is SA-F09 Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high-density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best-value AEG platforms on the market. Whether you're a new skirmisher looking for a long rifle shape with more features than the average or a veteran looking for some precision with a lightweight DMR-type, the Specna Arms SA-F09 FLEX™ HAL¹ ETU M4/AR-15 AEG will be an asset to you!

Are you looking for an excellent out-of-the-box base rifle for your DMR build? The Specna Arms SA-P26 PRIME™ Daniel Defense® MK18 12.5" M4/AR-15 AEG is the AEG you need! This premium assault rifle has had its internals completely revamped to make it a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL¹ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you want to make a DMR build but without needing the plethora of upgrades before it's skirmish-ready then the  Specna Arms SA-P26 PRIME™ should be the AEG on your wishlist!

Are you looking for an excellent out-of-the-box base rifle for your DMR build? The Specna Arms SA-P26 PRIME™ Daniel Defense® MK18 12.5" M4/AR-15 AEG is the AEG you need! This premium assault rifle has had its internals completely revamped to make it a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL¹ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you want to make a DMR build but without needing the plethora of upgrades before it's skirmish-ready then the  Specna Arms SA-P26 PRIME™ should be the AEG on your wishlist!

Are you looking for an excellent out-of-the-box base rifle for your DMR build? The Specna Arms SA-P26 PRIME™ Daniel Defense® MK18 12.5" M4/AR-15 AEG is the AEG you need! This premium assault rifle has had its internals completely revamped to make it a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL¹ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you want to make a DMR build but without needing the plethora of upgrades before it's skirmish-ready then the  Specna Arms SA-P26 PRIME™ should be the AEG on your wishlist!

Are you looking for an excellent out-of-the-box base rifle for your DMR build? The Specna Arms SA-P26 PRIME™ Daniel Defense® MK18 12.5" M4/AR-15 AEG is the AEG you need! This premium assault rifle has had its internals completely revamped to make it a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL¹ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you want to make a DMR build but without needing the plethora of upgrades before it's skirmish-ready then the  Specna Arms SA-P26 PRIME™ should be the AEG on your wishlist!

If you're looking for something a cut above the rest, the Specna Arms SA-P27 PRIME™ is exactly that. This AEG has changed the game when it comes to out-of-the-box performance. The internals have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is its ASTER II MOSFET or HAL MOSFET, it substantially improves trigger response and offers programmable firing modes. It also reduces the general wear on internal components and increases their reliability and performance during gameplay.

If you're after a rifle that doesn't require a plethora of upgrades before you deem it skirmish-ready then the SA-P27 PRIME™ should be the AEG on your wishlist.

If you want to run your Specna Arms PDW stock-equipped rifle all day, this is what you will need. With a considerable amount more room than the original battery tube, this tube can take up to a 7.4v 1450mAh LiPo battery.

If you are thinking of spicing up your M4 with a nice new rail system, freshening up its looks and reducing the weight of the front end for increased manoeuvrability, you've come to the right place! The KeyMod CNC Aluminium Free Float Handguard from Specna Arms is an ultra-slim, lightweight replacement handguard providing 20mm Picatinny rail at the 12 o'clock position, and KeyMod negative space attachment slots at the 3, 6, and 9 o'clock position, providing rails where needed with the option to mount more or add KeyMod accessories should you see fit.

If you are thinking of spicing up your M4 with a nice new rail system, freshening up its looks and reducing the weight of the front end for increased manoeuvrability, you've come to the right place! The KeyMod CNC Aluminium Free Float Handguard from Specna Arms is an ultra-slim, lightweight replacement handguard providing 20mm Picatinny rail at the 12 o'clock position, and KeyMod negative space attachment slots at the 3, 6, and 9 o'clock position, providing rails where needed with the option to mount more or add KeyMod accessories should you see fit.

Whether you're a veteran skirmisher looking for a lightweight backup or a newcomer seeking superb bang for your buck, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG should suit you perfectly! The SA-F04-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG is what you need!

Whether you're a veteran skirmisher looking for a lightweight backup or a newcomer seeking superb bang for your buck, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG should suit you perfectly! The SA-F04-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG is what you need!

If you're looking for spare magazines for your SA-X series SMG, you have found them! The 100rnd S-MAG Mid-Cap for SA-X & SA-FX series is constructed from high density polymer with a steel feed spring and is designed to keep up with high rate of fire platforms like the ASTER-equipped SA-X01 and SA-X02.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 100bbs with no battle rattle whatsoever. The sides of the magazine are textured with small Specna Arms logos to provide extra grip when pulling the mag from a pouch, and the baseplate is enlarged to assist with handling. If you have treated yourself to an SA-X or SA-FX series SMG you need some of these given how quickly these things can empty a mag!

If you're looking for spare magazines for your SA-X series SMG, you have found them! The 100rnd S-MAG Mid-Cap for SA-X & SA-FX series is constructed from high density polymer with a steel feed spring and is designed to keep up with high rate of fire platforms like the ASTER-equipped SA-X01 and SA-X02.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 100bbs with no battle rattle whatsoever. The sides of the magazine are textured with small Specna Arms logos to provide extra grip when pulling the mag from a pouch, and the baseplate is enlarged to assist with handling. If you have treated yourself to an SA-X or SA-FX series SMG you need some of these given how quickly these things can empty a mag!

If you're looking for spare magazines for your SA-X series SMG, you have found them! The 100rnd S-MAG Mid-Cap for SA-X & SA-FX series is constructed from high density polymer with a steel feed spring and is designed to keep up with high rate of fire platforms like the ASTER-equipped SA-X01 and SA-X02.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 100bbs with no battle rattle whatsoever. The sides of the magazine are textured with small Specna Arms logos to provide extra grip when pulling the mag from a pouch, and the baseplate is enlarged to assist with handling. If you have treated yourself to an SA-X or SA-FX series SMG you need some of these given how quickly these things can empty a mag!

If you're a practical skirmisher seeking a lightweight and cost-effective primary ready to host the most modern accessories, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is one to watch. Being part of Specna's FLEX™ line, this AEG is constructed almost entirely from high density polymer with a solid alloy outer barrel, ideal for mobile, agile and hostile playstles!

Inside, we are treated to Specna's latest programmable MOSFET, known as the HAL¹. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-F08, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight increase in FPS from the same strength spring.

On the outside, the SA-F08 is equipped with a 14mm CCW male threaded barrel, ready for a tracer unit or suppressor, an M-LOK handguard for your mission essential doo-dads, grips and other handling enhancements and a 20mm Picatinny railed receiver, ready for your choice of optical sight. If you're looking for an affordable entry point to Airsoft which will keep you competitive, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is a fantastic choice!

A LiPo Battery for Airsoft Electric Guns, with an 11.1v rating and 600mAh capacity. This compact 11.1v LiPo is ideal for PDWs and Airsoft Guns with a small battery space (specifically the Specna Arms PDWs), and features a Mini Tamiya Connector to connect to your AEG. If you have an Airsoft Gun that needs an 11.1v Battery, and has a tight battery compartment, then this is the ideal LiPo for you.

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a mid cap variant, meaning that it holds a medium amount and is filled at the top using a speed loader. Unlike high-cap mags there is no 'battle rattle' so if you're a more sneaky type of player mid-cap mags are for you.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

The Spenca CORE™ V2 Gearbox Shell provides 8mm bushings, radiused cylinder windows to help prevent cracks, and quick release spring functionality. Perfect for starting your ultimate gearbox build!

If you're looking for a compact and lightweight AR platform with stealthy styling, the Specna Arms SA-FH06 FLEX™ HAL¹ ETU™ M4/AR-15 AEG is a great choice. This AEG follows Specna's "FLEX" build standard, with full polymer externals, plus, an alloy flash hider and outer barrel. It's ideal for skirmishers who like to move fast and keep their energy high all day.

The latest SA-FH06 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive considering its low price point!

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

Want to make your Airsoft rifle more comfortable? An enhanced stock is what you need! The Specna Arms Crane Enhanced Carbine stock is constructed from high-density polymer, with steel QD sling sockets on either side, a steel adjustment pin and a rubber butt plate for added grip in all weather conditions. This stock is easy to install and simply requires you to lift the adjustment lever up and slide the stock onto your buffer tube. This stock will fit any AEG spec M4/AR15 buffer tube, including M4/AR15 stock adapters for Airsoft AK AEGs, SMG-5 and AR36 AEGs.

A spring-powered Airsoft bolt action Sniper Rifle which is a replica of the ever-popular M40A5, and comes with 3 x magazines and a Polymer rail system for the handguard.

A spring-powered Airsoft bolt action Sniper Rifle which is a replica of the ever-popular M40A5, and comes with 3 x magazines and a Polymer rail system for the handguard.

A spring-powered Airsoft bolt action Sniper Rifle which is a replica of the ever-popular M40A5, and comes with 3 x magazines and a Polymer rail system for the handguard.

A spring-powered Airsoft bolt action Sniper Rifle which is a replica of the ever-popular M40A5, and comes with 3 x magazines and a Polymer rail system for the handguard.

If you love the AR-9 SMG look but partake in a mix of CQB and woodland skirmishes, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG is a fine choice! Made from strong high density polymer with Specna Arms' unique receiver design, the SA-FX02 is the mid-length alternative to the FX01, equipped with a 10.5-inch outer barrel and sound-amplifying muzzle device, offering improved performance at longer range and a menacingly loud "pop" each time the AEG is fired.

Inside, the HAL¹ MOSFET/ETU system provides functionality rarely seen in AEGs at this price. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original FLEX™ AEG series, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

An ultra-light and agile build front to back, the FX02 is ideal for those who prefer slimmer AR-9 magazines but seek a more multi-role platform than comparable CQB-optimised AR-9s. Whether this will be your first foray into the Airsoft world or you're an experienced skirmisher seeking a lightweight but advanced backup, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG has both boxes ticked!

If you love the AR-9 SMG look but partake in a mix of CQB and woodland skirmishes, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG is a fine choice! Made from strong high density polymer with Specna Arms' unique receiver design, the SA-FX02 is the mid-length alternative to the FX01, equipped with a 10.5-inch outer barrel and sound-amplifying muzzle device, offering improved performance at longer range and a menacingly loud "pop" each time the AEG is fired.

Inside, the HAL¹ MOSFET/ETU system provides functionality rarely seen in AEGs at this price. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original FLEX™ AEG series, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

An ultra-light and agile build front to back, the FX02 is ideal for those who prefer slimmer AR-9 magazines but seek a more multi-role platform than comparable CQB-optimised AR-9s. Whether this will be your first foray into the Airsoft world or you're an experienced skirmisher seeking a lightweight but advanced backup, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG has both boxes ticked!

If you have ever felt like you messed up buying a rifle with a 14mm clockwise threaded barrel, weep no more! This 14mm CW to 14mm CCW thread adapter attaches to any 14mm CW male thread and provides a 14mm CCW male thread for the addition of more common CCW threaded accessories!

If your team use M4s but you prefer the AR36 this will suit your needs! This replacement magazine well will allow you to share magazines with your team and use smaller and more prevalent M4 magazine pouches.

Specna's iron sights are simple, no frills back up sights constructed from high density polymer, helping keep the weight of your build down for more important, heavy things, like huge freakin' scopes!

Specna's iron sights are simple, no frills back up sights constructed from high density polymer, helping keep the weight of your build down for more important, heavy things, like huge freakin' scopes!

If you're looking for a compact and lightweight AR platform with stealthy styling, the Specna Arms SA-C05 CORE™ HAL¹ ETU™ M4/AR-15 AEG is a great shout. This M4/AR-15 AEG follows Specna's "CORE" build standard, with a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and keep energy high all day long.

This, the latest SA-CO5 is rocking Specna's HAL¹ ETU,  boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!