Search results for 'smg case'

If you love the AR-9 SMG look but partake in a mix of CQB and woodland skirmishes, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG is a fine choice! Made from strong high density polymer with Specna Arms' unique receiver design, the SA-FX02 is the mid-length alternative to the FX01, equipped with a 10.5-inch outer barrel and sound-amplifying muzzle device, offering improved performance at longer range and a menacingly loud "pop" each time the AEG is fired.

Inside, the HAL¹ MOSFET/ETU system provides functionality rarely seen in AEGs at this price. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original FLEX™ AEG series, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

An ultra-light and agile build front to back, the FX02 is ideal for those who prefer slimmer AR-9 magazines but seek a more multi-role platform than comparable CQB-optimised AR-9s. Whether this will be your first foray into the Airsoft world or you're an experienced skirmisher seeking a lightweight but advanced backup, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG has both boxes ticked!

If you love the AR-9 SMG look but partake in a mix of CQB and woodland skirmishes, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG is a fine choice! Made from strong high density polymer with Specna Arms' unique receiver design, the SA-FX02 is the mid-length alternative to the FX01, equipped with a 10.5-inch outer barrel and sound-amplifying muzzle device, offering improved performance at longer range and a menacingly loud "pop" each time the AEG is fired.

Inside, the HAL¹ MOSFET/ETU system provides functionality rarely seen in AEGs at this price. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original FLEX™ AEG series, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

An ultra-light and agile build front to back, the FX02 is ideal for those who prefer slimmer AR-9 magazines but seek a more multi-role platform than comparable CQB-optimised AR-9s. Whether this will be your first foray into the Airsoft world or you're an experienced skirmisher seeking a lightweight but advanced backup, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG has both boxes ticked!

Those of you looking for a battery with a truly large capacity, you've come to the right place! The battery is perfect for larger battery compartments such as SMG-5, G3, M16 and AK platforms with fixed stock battery compartments. The battery has a voltage of 7.4v, a capacity of 2800mAh and a continuous discharge rate of 25C with a maximum discharge rate of 50C. The battery is connected to your AEG via the Mini-Tamiya connector, not to be confused with a Deans connector, however, adaptors are available.

The battery measures 13x1.1x4.2cm with a cable length of roughly 10cm.

The 3 Point Hook Sling from CS provides a perfect solution to the question of how to carry your longer and more unwieldy Airsoft guns. The sling includes 3 points of attachment, including 2 HK-style hooks and a loop with a buckle to secure it. This sling can be adjusted out to a massive 130 cm total length, making it well suited to any body type.

The 3 Point Hook Sling from CS provides a perfect solution to the question of how to carry your longer and more unwieldy Airsoft guns. The sling includes 3 points of attachment, including 2 HK-style hooks and a loop with a buckle to secure it. This sling can be adjusted out to a massive 130 cm total length, making it well suited to any body type.

Proven in battle, everyone has use for Ni-Mh crane stock batteries! The advantage of NiMh batteries over their LiPo batteries is that they are less volatile and don't require balance so you can use any charger as long as it's NiMh compatible, just make sure to not leave the battery charging unattended.

This battery has a voltage of 9.6v and a capacity of 1600mAh and is comprised of 8 cells working in unison, connected via the Deans/T-Plug connector.

This Ni-Mh sports a crane configuration, one of the most common types and is perfect for split battery compartments, most often seen in M4 stocks, M16, SMG-5 and AKs with full stocks. The battery measures 12x1.8x1.8cm per 4x cells and has a wire length of roughly 8cm.

If you want to shorten your MCX down a bit or you are going for a slick integrally suppressed look for your next build this outer barrel from Laylax is just what you need. This barrel is 6.5 inches (17cm) in overall length and is constructed from aluminium for a perfect balance between low weight and strength.

At the tip of the barrel, we are treated to 14mm CCW male threading, allowing you to equip your MCX with a suppressor for sneaky duties. The tip of the barrel is wide enough to allow an inner barrel to pass straight through, meaning no need to mod it if you want to keep the original MCX inner barrel length. If installed on a standard MCX the barrel will be entirely beneath the handguard, allowing you to mount a tracer unit or suppressor without increasing the overall length of your setup and give your rifle the "Honey Badger" look. If you are adding a tracer make sure you get a shorter inner barrel as well!

Want to make your VMP-1 SMG magazines look great and far easier to handle? The VMP-1 GBB SMG Magazine cover is just the thing! The magazine cover sleeves are supplied in a pack of 2 covers and is designed to slip over the lower section of the VMP-1 magazine and make them easier to handle in wet and cold weather. Making the magazine look more in keeping with the cutting-edge external design of the VMP-1 itself is just a bonus! Installation is as simple as slipping the cover over the bottom of the magazine with the baseplate removed, and then reinstalling the baseplate to secure it in place.

An accurate 6mm BB Airsoft Electric Gun replica of an iconic piece of movie history, an all Alloy constructed replica of the Sterling E-11 Blaster. 

G&Gs Hi-capa Killer! The Piranha SL features a split side design, with a stylish fluted barrel and a comfortable ergonomic frame with extended Picatinny rail. This pistol has a very fast cyclic rate, putting its rival, Hi-capa pistols, to shame! The Piranha SL also provides a long barrel for improved accuracy amongst a litany of other innovative G&G internal features.

The MEC M-Valve from PTS is designed to improve gas efficiency and speed up the cyclic rate of your KWA/KSC GBB pistol or SMG. The valve is constructed from high strength brass with rubber O-rings and should help improve the performance of your pistol in cold weather, and speed up the cyclic rate if you have installed a heavy steel slide or bolt.

If you have treated yourself to the phenomenal new SMG from Double Eagle, the UTR45, you will want to stock up on these! This 120rnd AEG magazine is compatible with the UTR45 and is loaded using a standard speed loader or loading rod through the feed/fill port at the top of the magazine. 

If you want the stealthy aesthetic for your SMG or rifle, this is how you do it! The VORSK QD Suppressor with 5-Lug Flash Hider; 14mm CCW is compatible with the VORSK VMP series and now any Airsoft replica with a 14mm CCW male threaded barrel thanks to the inclusion of the super aggressive 5-lug flash hider. The suppressor mounts to the 5-lug muzzle device via a QD interface, meaning it can quickly be removed and reinstalled when needed.

Constructed from aluminium with a foam filling, this suppressor should dampen the muzzle report of your SMG or rifle slightly but its main role is to provide slick looks. There also is plenty of space inside to fit a custom foam filling or tracer module if you are happy with a bit of fabrication!

If you're looking for an affordable way to spice up your build, the CYMA High Torque Neodymium Magnet Motor; Long Shaft is a great shout. This motor is the standard motor provided in CYMA's top-of-the-line Platinum E-Edition AEGs, a high torque motor powered by Neodymium magnets. Being a high-torque motor, this motor is ideal for DMR builds requiring stronger springs and CQB builds seeking improved trigger response but is easily fast enough to give most AEGs a significant ROF boost!

This version is the Long Shaft model, designed for M4/AR-15, P90, SMG-5 (not the -K model) and G3 AEGs and includes a pre-installed D-type pinion gear constructed from steel. The pinon spring is also included and the motor is pre-wired for spade connectors, meaning there is no need to break out the soldering iron to install it. If you're looking for a snappier trigger, building a DMR or seeking an increase in rate of fire, the CYMA High Torque Neodymium Magnet Motor; Long Shaft is a great affordable option!

If you need mags for your CYMA or Bolster Tuned CM.058 Bizon SMG, here you go! The CYMA 170rnd Mid-Cap Magazine for CM.058 Bizon AEGs is a spring-loaded mid-cap magazine with a capacity of 170 BBs, loaded through the fill/feed port using a speed loader or loading tool.

The magazine exterior matches the real thing perfectly, made from strong high density polymer, complete with "9x18" calibre markings on the side. This magazine is designed specifically for the CYMA CM.058 but will also work flawlessly with the Bolster Tuned CM.058.

A Tactical Assault Rifle Suppressor for Airsoft Rifles, rocking a 14mm CCW thread this classic suppressor style will fit right on almost any Airsoft Assault Rifle or SMG!

If you need more mags to keep your Specna Arms SA-X or SA-FX series SMG doing what it does best, this should suit you! The Specna Arms 200rnd S-MAG High Cap Magazine for SA-X & SA-FX AEG is a wheel wound high capacity magazine which holds 200 BBs. The magazine can be loaded through the fill window on the top of the magazine body by opening the fill window door and pouring your BBs straight in. The winding wheel is located on the baseplate and needs to be wound up to keep the magazine feeding.

The external design of this magazine matches other Specna Arms S-MAG style magazines, with SA logo textured panels on either side to add grip and enhance the aesthetic and an extended baseplate to make the mag easier to pull from pouches when a fast reload is required. Being based on the G&G ARP9 magazine design, this mag may also work in other AEG platforms designed for ARP9 magazines but is ideal for Specna Arms SA-X and SA-FX series AR-9 SMGs.

If you need more mags to keep your Specna Arms SA-X or SA-FX series SMG doing what it does best, this should suit you! The Specna Arms 200rnd S-MAG High Cap Magazine for SA-X & SA-FX AEG is a wheel wound high capacity magazine which holds 200 BBs. The magazine can be loaded through the fill window on the top of the magazine body by opening the fill window door and pouring your BBs straight in. The winding wheel is located on the baseplate and needs to be wound up to keep the magazine feeding.

The external design of this magazine matches other Specna Arms S-MAG style magazines, with SA logo textured panels on either side to add grip and enhance the aesthetic and an extended baseplate to make the mag easier to pull from pouches when a fast reload is required. Being based on the G&G ARP9 magazine design, this mag may also work in other AEG platforms designed for ARP9 magazines but is ideal for Specna Arms SA-X and SA-FX series AR-9 SMGs.

Tried and true, everyone has use for NiMh crane stock batteries! The advantage of NiMh batteries over their LiPo batteries is that they are less volatile and don't require balance so you can use any charger as long as it's NiMh compatible, just make sure to not leave the battery charging unattended.

This battery has a voltage of 9.6v and a capacity of 1600mAh and is comprised of 8 cells working in unison, connected via the Mini-Tamiya connector.

This NiMh sports a crane configuration, one of the most common types and is perfect for split battery compartments, most commonly seen in M4 stocks, M16, SMG-5 and AKs with full stocks. The battery measures 12x1.8x1.8cm per 4x cells, with a wire length of roughly 8cm.

If you're looking for top-tier performance from your next AEG build, the Warhead Industries CNC Black Brushless Motor belongs inside! This, the long shaft variant, is designed for standard M4/AR-15, SMG-5, G3 and P90 AEGs and is the same motor used in Bolster Armouries custom builds, a testament to its quality, reliability and incredible performance.

The CNC Black Brushless motor boasts a CNC 7075 aluminium housing and hand-wound stator, promising a more precise wind than machine-wound stators which translates to improved power and efficiency. To keep the immense power of the Warhead CNC Black under control, the motor is equipped with what is known as an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed.

The perks of a brushless motor over conventional motors include higher torque-to-weight ratio, reduced wear and tear, reduced operating noise and reduced heat build-up, allowing you to let rip with long bursts guilt-free! If you have your sights set on the pinnacle of AEG performance, the Warhead Industries CNC Black Brushless Motor; Long Shaft is the motor you need to achieve it!

Amidst the endless droves of pistol calibre carbines and SMGs currently being released, G&G present the MXC-9 to reassert its dominance in the field of CQB Airsoft platforms. The MXC-9 is constructed from high density polymer with a CNC machined aluminium handguard, and makes use of G&G’s superb G2 gearbox, complete with programmable fire controls allowing for 3 round burst.

In the looks department, the MXC-9  is largely based on G&G’s PCC45, and is even compatible with PCC45 magazines, but blends the receiver style of the PCC45 with a shorter handguard, sound amplifying muzzle device and a newly designed multi-position folding stock. Consider this the lovechild of the MCX and PCC45, with the frightening performance of the ARP-9 and SSG-1’s G2 gearbox!

Do you need a handy bag for transporting all your Airsoft gear around together? If so, then the Novritsch Gear Bag has you covered! It can accommodate a lot of your Airsoft gear such as rigs, tactical clothing and even some smaller platforms like SMGs. It also features internal pockets so you can perfectly organise BBs, mags and grenades. It features both a shoulder strap and hand straps so you can find the most comfortable way to carry your equipment to the battlefield!

If you're looking for spare magazines for your SA-X series SMG, you have found them! The 100rnd S-MAG Mid-Cap for SA-X & SA-FX series is constructed from high density polymer with a steel feed spring and is designed to keep up with high rate of fire platforms like the ASTER-equipped SA-X01 and SA-X02.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 100bbs with no battle rattle whatsoever. The sides of the magazine are textured with small Specna Arms logos to provide extra grip when pulling the mag from a pouch, and the baseplate is enlarged to assist with handling. If you have treated yourself to an SA-X or SA-FX series SMG you need some of these given how quickly these things can empty a mag!

If you're looking for spare magazines for your SA-X series SMG, you have found them! The 100rnd S-MAG Mid-Cap for SA-X & SA-FX series is constructed from high density polymer with a steel feed spring and is designed to keep up with high rate of fire platforms like the ASTER-equipped SA-X01 and SA-X02.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 100bbs with no battle rattle whatsoever. The sides of the magazine are textured with small Specna Arms logos to provide extra grip when pulling the mag from a pouch, and the baseplate is enlarged to assist with handling. If you have treated yourself to an SA-X or SA-FX series SMG you need some of these given how quickly these things can empty a mag!

If you're looking for spare magazines for your SA-X series SMG, you have found them! The 100rnd S-MAG Mid-Cap for SA-X & SA-FX series is constructed from high density polymer with a steel feed spring and is designed to keep up with high rate of fire platforms like the ASTER-equipped SA-X01 and SA-X02.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 100bbs with no battle rattle whatsoever. The sides of the magazine are textured with small Specna Arms logos to provide extra grip when pulling the mag from a pouch, and the baseplate is enlarged to assist with handling. If you have treated yourself to an SA-X or SA-FX series SMG you need some of these given how quickly these things can empty a mag!

If your Double Eagle M924 DMP-9 requires some additional magazines, these are the ones for you! The Double Eagle 130rnd Magazine For M924 DMP-9 is designed exclusively for that SMG and is NOT compatible with any other platform. The magazine has a steel shell, built to survive the rough conditions of any skirmish field, it also has a steel feed spring, which guarantees consistent feeding so your M924 DMP-9 is always ready for a fight.

The magazine has a 130rnd capacity, loads of ammo for CQB skirmishes, allowing for plenty of rapid double taps in the close confines of an indoor arena. To fill the magazine, use a speedloader directly on the feed lips, this also negates the "battle rattle" heard from high-cap design magazines.

Keep your Double Eagle M924 DMP-9 in the fight for longer with the Double Eagle 130rnd Magazine For M924 DMP-9 and be sure to outgun all your opponents with your stockpile of spare ammo!

If you like flashlights and lasers but are short on rail space, the WADSN AXN Double Switch is here to save the day. This dual pressure switch allows you to operate your SF Scout style flashlight and a PEQ/DBAL style laser with a 3.5mm jack through a single switch mounted to either a 20mm Picatinny rail or M-LOK slots. 

Dual switches are a great way to reduce your workload in game and streamline your setup for a more modern and professional look. The AXN type switch has the advantage of being far smaller than its rivals, making it ideal for a setup with limited rail space. Being set at a comfortable angle also reduces fatigue when compared to flat switch designs. If you have a load of shiny things on your primary, the difference a dual switch makes when it comes to ease of use cannot be overstated!

If you're into modern Russian firearms and seek an SMG, the ARCTURUS PP-19-01 Vityaz ZTAC SP1 CQB AEG w/Optical MOSFET is a fine choice! This full metal PP-19-01 replicates the SMG version of the AK platform but is dressed up externally with Zco-style furniture for a super slick, modern look. This beast is constructed almost entirely from steel and CNC-machined aluminium, with a flawlessly realistic finish applied to the externals and the hefty feel an AK-derived platform deserves.

On the inside, things are equally special as the PP-19-01 is rocking an Optical MOSFET, high torque motor, a plethora of reinforced internal gearbox components, a rotary HOP-up unit and a 6.03mm stainless steel tightbore inner barrel to provide the accuracy to deal with opponents at long range.

The pre-installed MOSFET also offers programmable fire modes, including burst modes of various durations, progressive trigger, binary trigger, and binary with ramping full-auto. Also available are 7 pre-cocking adjustments, 8 active braking options, 5 trigger sensitivity settings and 5 trigger reset distance options. This solid gearbox setup is driven by a 25K high-torque motor, providing a super-snappy trigger response and enough torque to cope with stronger springs. If you're looking for a flawlessly built replica of Russia's latest SMG, the ARCTURUS PP-19-01 Vityaz ZTAC SP1 CQB AEG w/Optical MOSFET is one of the best options out there!

The ARCTURUS PP-19-01 ZTAC SP1 AEG is certainly a unique-looking SMG, if you like to stand out then this is the one for you! This SMG has an AK origin and is kitted out with plentiful Zco-style furniture, including an extended railed handguard, built-in rail riser and PT-1 multi-adjustable stock. The package also includes a DTK-2 style muzzle brake and a DTK Saiga suppressor, giving you the option to rock the stealthy look or run a beastly muzzle brake for the intimidation factor.

This monster is constructed almost entirely from steel, with a flawlessly realistic finish applied to the externals and the hefty feel that an AK-derived platform deserves. On the inside, things are equally special as the PP-19-01 is rocking an Optical MOSFET, a high torque motor, a plethora of reinforced internal components, a rotary style HOP-up unit and a 6.03mm stainless steel tightbore inner barrel. If you are an AK kind of guy, but you like more modern platforms with a more special ops look, the PP-19-01 ZTAC SP1 AEG will certainly fulfil your wishes!

If you need a battery for a fixed stock or other large battery compartments this one should fit the bill! The 7.4V 1800mAh 20C Block LiPo Battery from Electro River is the perfect battery for full stocks found on M16, AK, SMG-5 and G3 Airsoft AEGs. The battery measures 10 x 1.2 x 3.5cm approximately with a wire length of around 9cm and is pre-wired to a mini-Tamiya battery connector.

The battery is a 7.4V 2-cell battery in block configuration with a continuous discharge rate of 20C and a maximum discharge rate of 40C, making it great for almost any Airsoft AEG, though make sure you measure before ordering!