- 7.4v 2S
- 2000mAh
- 20C Rating
An ultra thin and lightweight crane stock battery, perfect for squeezing into the ever more popular Airsoft crane stock.
Finance Options
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship all around world, with delivery not only to the UK, but to most of the EU and select Worldwide locations as well. We provide a working day by road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change, and are only a rough guide. For more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£4.95
Approx.
UK Next Day
£6.95
Approx.
Highlands / Islands
£12.99*
Approx.
EU
£12.99+*
Approx.
* Please note that Scottish Highlands, Islands and EU post prices can vary wildly. Prices range from £8.99, up to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The battery provides 2000mAh of power with a discharge rate of 20c, giving it a 20w output. The battery is so thin it can even fit into handguards on such rifles / SMG's as MP5's. AK's, M4 & G36's. If you own an M4/15/16 crane stock and would like a battery that is likely to last all day, this is one of the largest capacity batteries that will fit inside such a stock.
Features:
- 7.4v
- 2000mAh
- 20c rating
- Small Tamiya
- Approx. 10cm x 1cm x 3cm
- 2 x cells
- Perfect for M4/15/16 crane stocks
Package Includes:
- 7.4v 2000mAh 20C LiPo Crane Stock Battery
- Instruction Manual
Special Instructions:
When using your LiPo battery ensure that it does not fully discharge, otherwise you may damage or destroy your battery, if you feel that your rate of fire is decreasing then stop using your battery immediately. Battery levels can be checked by plugging a LiPo Alarm into your battery.
Safety Precautions:
Never leave Li-Po charging unattended - Always monitor the charging process of your Li-Po so that you can react immediately to any potential problems. If your batteries start to balloon or swell up discontinue charging / discharging. Before and after the use of your Li-Po batteries, inspect them to ensure there is no physical damage or swelling as those are signs of an imminent failure.
Only use approved Li-Po chargers. Do not pierce or disassemble the battery. The charging current should not be more than 1.0c as charging at a higher current may damage the cell or even lead to overheating or leakage. Stop charging immediately when temperature is over 45°C, and stop using the battery once the temperature is over 60°C.
We recommend that all LiPo batteries be charged in a fire resistant location, and inside a Fire Proof bag, such as the VP Racing Battery Giant Power LI-PO GUARD Charging Bag.
Specification
General
|
Product Length
|
Approx. 10cm
|
|---|---|
|
Product Height
|
Approx. 3cm
|
|
Product Width
|
Approx. 1cm
|
 |
Li-Po - Never Leave Charging Unattended
Li-Po - Only Use Approved Chargers
Li-Po - Charge in a Fire Safe Area
Store in a dry place. Store in a closed container.
Keep out of reach of children.
Read label before use.
|
Battery Specification
 |
Li-Po
|
|---|---|
 |
Crane
|
 |
 |
 |
7.4V
|
 |
2000mAh
|
 |
25
|
 |
2
|
 |
3.7V
|
 |
1.5cm
|
 |
12cm
|
Size guide
MAKE SURE YOU USE THE CORRECT CHARGER TYPE FOR THE CORRECT BATTERY
Airsoft Battery should only be charged with the chargers as they are specifically designed to work with the specific voltages required by the battery.
Different battery types have different chemical configurations, and require certain chargers to charge them. Charging a battery with the wrong charger can cause damage to the battery and charger, and can cause fires and further damage. Please ensure that before charging you double check that you are using the correct charger.
If your charger supports multiple battery types always ensure that it is on the correct settings before starting the charge.
If you are unsure of what battery or charger you have please get in touch with us via the Contact Us Page.
Using a LiPo?
If you're using a Li-Po battery only use a Li-Po charger!
Failure to do so can cause damage to the battery and charger!
Using a NiMh?
If you're using a Ni-Mh battery only use a Ni-Mh charger!
Failure to do so can cause damage to the battery and charger!
Need something to charge your LiPo?
- LiPo Battery Charger
- For 7.4v / 11.1v LiPo
- Balance Charger
Built by NUPROL as part of their Power range this is a high quality Li-Po charger designed to charge both 7.4v Li-Po and more advanced 11.1v three cell LiPo battery.
- Balance Battery Charger
- Includes Power Unit
- For 3 /4 Cell Lipo
A battery charger which has the ability to charge 7.4v and 11.1v LiPo batteries, the most common type of Airsoft battery used in modern Airsoft replicas. The charger also balances the charge between the cells to help keep the battery consistent.
- Advanced Smart Charger
- NiMh / LiPo / LiHV / NiCD
- Digital Display Screen
Built by NUPROL as part of their Power range this is a high quality Airsoft battery charger which packs a huge collection of features under the hood. Not only does the charger charge standard LiPo and NiMh batteries, but also charges LiFe, Ni-CD and LiHV cells too.
- Cell Status LEDs
- 2 Cell & 3 Cell Batteries
- For LiPo/Li-Ion Batteries
A balance charger for LiPo and Li-Ion batteries (Lithium Polymer and Lithium Ion), which features both 2 Cell and 3 Cell balance ports to handle 7.4v and 11.1v batteries, as well as a handy status LED for each cell.
- Charges all Airsoft Battery
- LiPo / LiFe / NiMh / NiCd
- Compact Main Unit
Built by NUPROL as part of their Power range this is a high quality auto-stop intelligent charger designed to charges all types of Airsoft battery, including LiPo, LiFe, Ni-Mh and Ni-Cd.
- Auto Balancing
- 1A - 3A Charge
- For LiPo / LiFe
An intelligent auto-stop charger which allows you to charge all types of LiPo and LiFe battery used with Airsoft Guns. The battery features a Polymer Housing and charges batteries which house between Two and Four Cells. The charger supports both 7.4v, and 11.1v, the most common battery voltages for Airsoft LiPo.
This is the perfect charger for any Airsoft Skirmisher who wants a cheap charger which is of a high quality, rather than spending more money on a more high-tech charging unit. The charger is not unique to Airsoft, and can be used with any brand of LiPo and LiFe battery, and can also be used in RC Cars, Drones, Controllers, or anything with a removable LiPo battery.
- Balance Charger
- Charge 3 and 4 Pin
- Includes Power Unit
A Smart Battery charger designed to charge 2/3 Cell LiPo and LiFe batteries. The charger is designed to Automatically charge batteries until they are full, prolonging the life of the battery by preventing overcharge.
- Charges LiPo / LiFe / NiMh
- Balance charges batteries
- LED status indicators
Built by NUPROL as part of their Power range this is a high quality charger designed to charge LiPo, LiFe, and NiMh batteries, all of the most common types of battery used in Airsoft replicas.
The charger itself is a smart charger, meaning that the charger automatically charges and cuts off when the battery is full. Some cheaper low-end chargers do not support this meaning you have to work out how long to charge for, with this charger you can plug it in and not have to worry about when the battery is full, as the charger will cut off the power supply when it is full to prevent any damage to the batteries.
- Smart Battery Charger
- For NiMh / LiPo / LiFe
- LiHv / Li-Ion / NiCd / PB
Built by NUPROL as part of their Power range this is a high quality charger designed to charge LiPo, NiMh, LiFe, LiHv, LiLo, NiCd and PB batteries, all of the most common types of battery used in Airsoft replicas.