All Airsoft Assault Rifles

If you're into the British Army look, this should be your primary! The Ares SA80/L85A3 AEG; Deluxe Standard Issue Set includes everything you'll need to recreate the iconic L85A3 rifle as it is issued to the British Army, including a fantastic replica of the ELCAN Specter LDS 4x optic with the Shield RMS piggyback red dot sight and a Grip Pod replica in desert tan.

Just like the standard version, this beast boasts full metal construction and incredible attention to detail, making it as suitable for skirmishing as it is for display in a museum! The lower and upper receivers are both made from stamped steel, with the modernised A3 handguard and 20mm Picatinny top rail being CNC machined from aluminium for a flawless form and perfectly in-spec attachment interfaces.

Inside, the L85A3 is based around a unique gearbox shell with the Ares EFCS MOSFET, providing programmable fire controls through the Ares EFCS Programming Box (available separately) and preventing trigger lock-ups for a ferocious semi-auto response rate. A high torque motor drives the 18:1 steel gearset, allowing for stronger springs to be installed and further improving trigger response. To add a side of realism to the firing experience, the L85A3 also boasts an electric blowback system, cycling the mock bolt carrier back and forth with each shot and drowning out the gearbox report with a violent "clack-clack-clack".

If you're working on a modern British Army loadout and need a primary to finish it off, you can't ask for much better than the Ares SA80/L85A3 AEG; Deluxe Standard Issue Set. With the correct optic and vertical grip, 2 magazines and a superb quality hard case to store it all in, this is the L85A3 replica package for the skirmisher who wants the most realistic look without any problems sourcing the correct bits!

If you seek an M4/AR-15 platform with reinforced internals focussed on reliability, the Delta Armory DA-B06 BRAVO™ 10” KeyMod M4/AR-15 AEG is one to watch. Constructed with a strong high-density polymer receiver and a CNC aluminium handguard, the DA-B06 is perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game.

Inside the DA-B06, we are treated to the same pre-upgraded internal parts as the other offerings in Delta's BRAVO™ line, including a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, SHS tappet plate and piston, 7mm ball bearing bushings, a CNC Type A flat trigger and a reinforced V2 gearbox shell. Externally, this beast is rocking a KeyMod handguard equipped with pre-installed 20mm rail sections and the superb Delta Armory battery stock, getting you off the mark with advanced externals ready for your choice of accessories!

If you like your primary simple, reliable and accessory-ready, the DA-B06 BRAVO™ 10” KeyMod M4/AR-15 AEG will do what you need it to, with plenty of upgrade options down the line thanks to its full TM AEG compatibility. At the ideal length to contend with tight corners in CQB and distant enemies outdoors, the DA-B06 is a fantastic multi-role platform!

An iconic platform! The Novritsch SSR77 A1 AUG AEG is based on the Austrian standard-issue rifle, used by Christoph from Novritsch himself. It features a full metal construction, although, on an AUG that doesn't mean a lot of metal. The proportions of polymer to metal used for the SSR77 correspond perfectly with the iconic, real steel StG 77 AUG. Novritsch has once again proven that they are really thinking of the players, with its programmable electronic trigger unit, CNC Hop-Up chamber and an infinity flat-hop AEG bucking, the Novritsch SSR77 A1 AUG AEG is a treat for any Airsoft skirmisher!

The programmable electronic trigger unit features modes such as semi-auto, burst, binary, full auto deactivation and adjustable pre-cocking. The ability to alter fire modes makes the SSR77 A1 a very versatile platform and when combined with the lighter-weight high-density polymer, it makes for a premium rifle that is ready for both outdoor and CQB skirmishes. If you are looking for a rifle to complete your military look, or you simply want to get your hands on a great performing AUG, the Novritsch SSR77 A1 AUG AEG is one of the best Airsoft AUGs available on the market!

Calling all Recoil loving Airsofters, your time has come. The Heckler & Koch HK417 licensed by UMAREX and manufactured by VFC is here and Damn Boi HE THICC! Fully licensed by Heckler & Koch, this awesome Gas Blowback Rifle is a must have for the recoil hungry player looking for the ultimate immersion experience. This the the Generation 2 version, featuring a newly designed HOP-up adjuster which is much easier to operate!

An electric powered 6mm Airsoft replica of the venerable G3 platform complete with integrated bipod, which was originally designed in the 1950s but has proven to be such a successful platform that it has seen updates all the way through to being in current use with military groups around the world.

Designed and manufactured specially for Airsoft by APS, this 6mm BB Airsoft AEG is purpose built as a practical and user-friendly AEG, featuring fully ambidextrous controls in an ergonomic bullpup chassis.

Looking for something that stands out from the crowd of M4s and AKs? Here we have a rifle for those of a discerning taste. The LK58 from JG is a close replica of the real world FAL, a rifle that is often considered the western equivalent of the AK47, due to its widespread use throughout NATO during the cold war. The LK58 is modeled after the American civilian tactical FAL, the SA58, and has all the classic FAL features with a sprinkle of modernity for convenience.

If you're in search of an affordable, easy to master and fully upgradable primary, the NUPROL Delta Pioneer Recon M4/AR-15 AEG should be in your sights! This M4/AR-15 AEG replica is constructed predominantly from high density polymer and equipped with plenty of attachment interfaces, from its 20mm Picatinny railed receiver to its mock KeyMod handguard with pre-installed rails and 14mm CCW male threaded barrel. Whether you want to rock a red dot sight, rifle scope, tracer unit, suppressor, vertical grip or bipod, the M4/AR-15 Recon is ready!

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges with an accuracy advantage using high quality BBs. If you need a cheap and cheerful beginner platform with plenty of upgrade and customisation options or a reliable, lightweight back-up platform to loan to mates or use when your arms get tired, the NUPROL Delta Pioneer Recon M4/AR-15 AEG is a fantastic option!

If you're looking for a compact and lightweight AR platform which is perfect for close-quarters engagements, the Specna Arms SA-C12 CORE™ HAL¹ ETU™ AEG is a superb choice. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long.

This, the latest version of the SA-C12 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

If you like the deadly, snub-nosed look of an integrally suppressed AR platform but want a shape less seen, the Delta Armory DA-B09 BRAVO™ Silent Ops Classic M4/AR-15 AEG should be right up your street. This is Delta's "Classic" version of the Silent Ops 7, boasting a CNC machined aluminium handguard with a wider-than-usual design to bring more realism to the sneaky beaky AR.

The handguard is free-floated and includes a 20mm Picatinny rail extension at the top, designed to bridge the gap between the receiver and handguard rails for a more integral look and to allow for larger optical sights. If you ask us, this is how the original should have been, setting the Silent Ops apart from other similar integrally suppressed M4 AEGs. Inside the DA-B09, we are treated to the same pre-upgraded internal parts as the other offerings in Delta's BRAVO™ line, including a rotary HOP-up unit, 6.03mm tightbore inner barrel, SHS tappet plate and piston, 7mm ball bearing bushings, a CNC Type A flat trigger and a reinforced V2 gearbox shell.

For stealthy skirmishers who want a more unique look, the Delta Armory DA-B09 BRAVO™ Silent Ops Classic M4/AR-15 AEG will give you exactly that. With pre-upgraded internals focussed on reliability and a unique front-end style to separate it from the masses, the Silent Ops Classic is a mean machine ready for any skirmish scenario you put it in!

Don't worry, it won't bite! This AUG certainly defies the conventional style of most common assault rifles, even most AUGs themselves and they're pretty unconventional! It brings aggression and style to the battlefield, with a fierce front end, the muzzle device is sharp and pointy, menacing to look at and overall gives this AUG a hint of danger. This pairs with the handguard, which is styled to look like a set of jaws with sharp fangs, again, adding to the brutal look of this AEG.

As it is an AUG, it boasts some of the usual features that, like Marmite, you either love or hate. It boasts modern ergonomic features, ambidextrous controls and ultra-slick quick disassembly it's almost impossible to believe that the first AUG rifle was designed way back in 1977! It was known originally as the STG 77 when it was introduced to the Austrian service and it has been seen with numerous armed forces and police units around the world.

Don't worry, it won't bite! This AUG certainly defies the conventional style of most common assault rifles, even most AUGs themselves and they're pretty unconventional! It brings aggression and style to the battlefield, with a fierce front end, the muzzle device is sharp and pointy, menacing to look at and overall gives this AUG a hint of danger. This pairs with the handguard, which is styled to look like a set of jaws with sharp fangs, again, adding to the brutal look of this AEG.

As it is an AUG, it boasts some of the usual features that, like Marmite, you either love or hate. It boasts modern ergonomic features, ambidextrous controls and ultra-slick quick disassembly it's almost impossible to believe that the first AUG rifle was designed way back in 1977! It was known originally as the STG 77 when it was introduced to the Austrian service and it has been seen with numerous armed forces and police units around the world.

The Army Armament R902 Aug Military Model Railed AEG is an iconic replica of the Austrian military rifle. It is certainly one to add to your assault rifle collection. It has also been seen in Australia and New Zealand and was also wielded by Karl, the mercenary companion to Hans Gruber during their attempted takeover of Nakatomi Headquarters in the 1988 movie Die Hard.

The R902 boasts full metal construction, a long inner barrel and an integrated 3x optical sight, it is a more modern iteration of the AUG with the addition of multiple 20mm rail sections for accessories not commonly associated with AUG platforms, such as flashlights, lasers and backup sights. Join the elite, equip yourself with an AUG and benefit from the improved handling, and the long barrel of this fantastic Airsoft AEG version of a near-perfect real-world design!

If you are working on your Special Forces loadout but haven't had time to hit the gym, Delta Armory has the perfect MK18 for you! The DA-B15 BRAVO™ is styled to match the real steel MK18 MOD.1 rifle issued to US Navy SEALs and Delta Force but this replica is far lighter than full metal versions thanks to its combination of a CNC aluminium handguard and alloy outer barrel with a high-density polymer receiver and buffer tube.

Inside the DA-B15, we are treated to the same pre-upgraded internal parts as the other offerings in Delta's BRAVO™ line, including a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, SHS tappet plate and piston, 7mm ball bearing bushings, a CNC Type A flat trigger and a reinforced V2 gearbox shell. Externally, this beast is rocking a quad Picatinny handguard equipped and the superb Delta Armory battery stock, getting you off the mark with advanced externals ready for your choice of accessories!

If you're searching for a compact platform for your aggressive playstyle, the Delta Armory DA-B13 BRAVO™ M4/AR-15 8" M-LOK AEG is one to watch. Externally, this beast is rocking an M-LOK/20mm Picatinny hybrid handguard and the superb Delta Armory battery stock, getting you off the mark with advanced externals ready for your choice of accessories! 

Inside the DA-B13, we are treated to the same pre-upgraded internal parts as the other offerings in Delta's BRAVO™ line, including a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, SHS tappet plate and piston, 7mm ball bearing bushings, a CNC Type A flat trigger and a reinforced V2 gearbox shell. The quick change spring system allows for easy power tuning to meet your local site's limits and the tightbore inner barrel will improve accuracy potential and air efficiency, giving you a few extra FPS from the same power spring. 

If you're new to the game looking for a reliable starting point for your Airsoft adventure with full aftermarket upgrade compatibility and competitive performance straight out of the box, the Delta Armory DA-B13 BRAVO™ M4/AR-15 8" M-LOK AEG suits your needs perfectly!

If you're looking for a full metal AR with modern styling, the CYMA Platinum CM.097B M4/AR-15 AEG; Kestrel Basic ETU is a fine choice! Part of the newly revamped CYMA Platinum line, the CM.097B boasts the same reinforced high-speed internals as the original with the EShooter Kestrel Basic MOSFET added to the mix. 

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off! 

Even better than the original when it comes to downrange effect while maintaining the superb external quality CYMA Platinum is known for, the CM.097B is a fantastic intermediate option with sleek modern styling and plenty of pre-upgraded parts. If you're ready to let rip with a cutting-edge full metal AR, the CYMA Platinum CM.097B M4/AR-15 AEG; Kestrel Basic ETU is calling your name!

An Electric Airsoft 6mm BB Gun AR36C carbine which is constructed primarily of Light and Durable Polymer, with only the Outer Barrel and the Internals made from Alloy.

If you are a fan of bullpup rifles and you don't have an AUG in your collection you are missing out! The Army Armament KU905 AUG Full Rail AEG is a unique modern take on the famous AUG assault rifle which has served with the militaries of Austria, Australia and New Zealand, and was also wielded by Karl, mercenary companion to Hans Gruber during their attempted take over of Nakatomi Headquarters in the 1988 movie Die Hard.

The KU905 boasts full metal construction, a pre-installed MOSFET and a quad-railed handguard with an integral suppressor, and is a more modern iteration of the AUG with plenty of 20mm rails on the stock/chassis for the addition of accessories. If you need an AUG that can be kitted out like an M4 and has a unique look as a bonus, the KU905 will do everything you need it to!

If you are a fan of bullpup rifles and you don't have an AUG in your collection you are missing out! The Army Armament KU905 AUG Full Rail AEG is a unique modern take on the famous AUG assault rifle which has served with the militaries of Austria, Australia and New Zealand, and was also wielded by Karl, mercenary companion to Hans Gruber during their attempted take over of Nakatomi Headquarters in the 1988 movie Die Hard.

The KU905 boasts full metal construction, a pre-installed MOSFET and a quad-railed handguard with an integral suppressor, and is a more modern iteration of the AUG with plenty of 20mm rails on the stock/chassis for the addition of accessories. If you need an AUG that can be kitted out like an M4 and has a unique look as a bonus, the KU905 will do everything you need it to!

If you're looking for an Airsoft bundle based around one of the best M4 AEGs on the market, you just found one! The KRYTAC REC7 Premium Primary Pack; SBR includes the KRYTAC Barrett REC7 SBR AEG, 2 extra mid-cap magazines, a holographic style red dot sight from Guerilla Tactical with a Ghost 3x Flip to side magnifier. The set also includes the HASTA Large Wheeled Rifle Case, giving you a nice home to store your new premium primary!

If you're after an AK AEG but want a more exciting firing experience, the JG1011B AKS-74U EBB should put a smile on your face! This AK replicates the AKS-74U, the compact variant of the AK-74 issued to Russian special forces from the Cold War era right up to the present day. The AKS-74U is also often seen in the hands of the leadership of rebel groups, seen as a status symbol as it was originally issued to the most elite Soviet combat troops.

The party trick of this AK is its electric blowback system, providing a more exciting firing experience by cycling the mock bolt carrier back and forth with each shot. This provides an awesome metal-on-metal "clank", downing out the usual AEG firing report and makes shooting the JG1011B that bit more fun than other AKS-74U AEGs.

Build-wise, the JG1011B is almost entirely made from metal, with a large proportion of steel parts for an authentic, weighty feel. The stock and pistol grip are made from polymer, and the upper and lower handguards are constructed from real wood to complete the AK aesthetic. If you are getting bored of standard AEGs and want something a bit more fun to shoot but still want the inherent reliability and affordability of an electricity-powered Airsoft gun, the JG1011B would be a fantastic choice!

If you're after a more advanced beginner bundle, this set was made with you in mind! The Delta Armory DA-B13 Intermediate BRAVO™ Bundle includes the Delta Armory DA-B13 BRAVO™ M-LOK M4/AR-15 AEG, 2 extra 125rnd mid-cap magazines, a speedloader, 2000 0.25g BBs, the Theta Optics Open Reflex Sight, a HASTA lens protector and a PJ 100cm Rifle Bag. Add your choice of battery, charger and face/eye protection and you're ready to hit the field!

Wanting to get into Airsoft skirmishing and are a fan of the world renowned and iconic AK47? Look no further than the CM.028.

With it's tried and true design, this AK makes for a great starter rifle and a great budget friendly gun that is reliable, thanks to it's alloy internals, barrel and top cover and also lightweight thanks to it's polymer construction.

Included in the package is a 525rnd Hi-cap magazine so you're ready to go with a huge BB capacity allowing you to lay down some serious supressing fire right out of the box.

If you are after an authentic looking AK74 with solid internals and an electric blowback system the APS AK74 is certainly worth a look! This AK is styled after the original AK74 issued to the Soviet Red Army during the 1970s, seeing service in Afghanistan before being supplemented by the AK74M in the early 1990s.

The AK74 EBB boasts real wood furniture with a smooth and authentic matt varnished finish and majority steel construction for the hefty and authentic feel you can only get from a properly built AK replica. To make things even more realistic, this AK has been worn down in all the key raised edges with a subtle but authentic battle-worn finish which provides a unique look without going over the top. If you like an AK with a well-loved look, this one would be a fine choice!

If you're looking for a high-end base for your dream DMR build, the KRYTAC Trident MK3 SPR-M AEG is one of the best options out there! Boasting flawless full metal construction, a flawless finish and an external redesign with KRYTAC's latest furniture, this is the KRYTAC SPR in its ultimate form, offering better performance and handling than ever before!

This is the best GBBR on the market, no debate. The Tokyo Marui M4A1 CQB-R Block 1 has inspired plenty of other brands with its unique ZET system. This gas blowback system provides this replica with a thunderous recoil and an extremely realistic feel, any skirmisher will be impressed with this rifle, from mil-sim to casual players, this Tokyo Marui rifle is a lot of fun for anyone!

The great thing about Tokyo Marui platforms is that there is no struggle finding after-market parts, as many upgrade parts and replacement pieces are built to work for Tokyo Marui platforms, not that you will need many aftermarket parts because this CQB-R is built to perform well and last a long time. If you've been searching for that extra taste of realism from your Airsoft replicas, the Tokyo Marui CQB-R GBB Rifle Block 1 will certainly satisfy you!

If you need a sneaky primary for mid to long-range, the Delta Armory DA-A10-ETU ALPHA™ Silent Ops DMR M4/AR-15 AEG should be on your shopping list. This full metal M4/AR-15 AEG boasts Delta Armory's best internals yet, kitted out on the inside with Delta's programmable MOSFET/ETU system, a plethora of CNC machined aluminium parts, CNC steel 16:1 gears, and a high torque motor. The Delta MOSFET/ETU offers the option of 3 or 5-round burst, binary trigger and pre-cocking, all of which can be programmed in using the fire controls of the AEG itself.

Externally, this beast is ready for DMR duty, boasting a lengthy KeyMod handguard for accessories and an integral suppressor for that stealthy styling. Add an LPVO scope and the look is complete, whether you're going for a full high-FPS DMR build or simply seeking an accurised assault rifle. If you like integrally suppressed AR builds and are looking for a longer alternative to the common short configurations, the Delta Armory DA-A10-ETU ALPHA™ Silent Ops DMR M4/AR-15 AEG is a fantastic choice!

If you have been eyeing up an ARCTURUS AK-12 but haven't yet taken the plunge, the AK-12 with AK-19 stock will make you glad you waited! This updated version of the AK-12 is styled after the latest AK-12 variants offered to civilian shooters, with improved ergonomics thanks to the new AK-19 stock and enhanced pistol grip. As with the previous ARCTURUS AK-12, this AEG is made almost entirely from steel, with a gorgeous stamped steel receiver and top cover and only the muzzle brake being alloy. On the outside, the AK-12 is slicker than ever before!

When it comes to internals, this variant of the AK-12 is equipped with an in-line MOSFET to improve trigger response and rate of fire and extend the life of the microswitch trigger by improving electrical efficiency. The gearbox is pre-upgraded with components focused on reducing friction, including a ball bearing quick change spring guide, ball bearing piston head, steel gears mounted on 8mm bushings and a ball bearing pinion gear to allow the high torque motor to spin more freely at high speeds. The inner barrel is a 6.01mm tightbore constructed from steel for maximum rigidity, and the ARCTURUS AK rotary HOP-up unit is also present, giving you the most modern innovation in AK HOP-ups with easier-to-apply adjustments and superb air seal.

Whether you are fixed on an AK-12 or you are checking out the AK platform options, the ARCTURUS AK-12 with AK-19 stock would make a fantastic, up-to-date primary for any modern Russian military or PMC loadout!

Looking for the base gun for your Airsoft DMR build? The Ares AR-308 series are uniquely equipped for this role, being patterned after real steel AR-10 battle rifles, the M4/AR15's big brother. The AR-308 series are built to dominate, being kitted out with a high torque motor, quick change spring system, the Ares EFCS trigger unit and a rotary HOP-up unit with the opportunity to lock the AEG to semi, either using an Ares programmer unit or mechanically by installing a replacement selector lever if you want to build the inside of the AR-308 to suit the DMR styling of the externals.

The AR-308L Deluxe Version is the full-length member of the Ares AR-308 family and comes ready for DMR duty straight out of the box including the superb Ares 1-6x24 Illuminated scope, a dual ring scope mount, the Ares QD suppressor and two mid-cap magazines, all served to you in an excellent quality hard rifle case. The AR-308L can be electronically locked to semi-automatic but out the box shoots at 330 FPS average straight out of the box, meaning you need the areas  programmer box to change this to a DMR role! The external build quality of this AEG is absolutely exceptional, with razor-sharp machining throughout and a beautiful matt metallic bronze finish applied. We aren't sure what's better, the external quality or the ferocious performance of this big boy AR!

Those of you looking for a classic AK platform with more than its fair share of real wood and steel parts; you may have just found your new primary! The Jing Gong JG1011 AKS-74U boasts full metal construction and beautiful real wood handguards that both look and feel great.

Separating the JG model from more conventional AKS-74U AEGs, the JG1011 features an electric blowback system which means that with every shot the charging handle moves back and forth with a "clank clank clank", adding to the rifle's realism and making the firing experience all the more special. Unlike other EBB Airsoft guns, this AKS-74U takes standard AK AEG platform magazines, meaning spares are always available and affordable, so no worries about finding enough spare mags to get you through a skirmish!

If you are getting bored of standard AEGs and want something a bit more fun to shoot but you still want the inherent reliability and affordability of an electricity-powered Airsoft gun, the JG1011 would be a fantastic choice!