All Electric Parts

If you're running an AEG equipped with a microswitch V2 gearbox and need a faster trigger, the Cybergun JeffTron Switch Brake MOSFET with Wiring is what you need! This Active Braking MOSFET is designed to replace the original microswitch trigger system and comes pre-wired with high-quality AWG16 and AWG24 wiring. As with any internal upgrade, we suggest consulting a tech before attempting installation if this is your first time!

This MOSFET is designed to prevent the piston from stopping in a random position when you take your finger off the trigger when shooting full auto and ensures only a single cycle is completed in semi-auto. Rate of fire and trigger response should also improve thanks to electrical efficiency advantages when compared to standard microswitches. This MOSFET is only designed for microswitch trigger-equipped V2 gearboxes and isn't likely to work with standard V2 or other gearbox types.

If you are looking to further extend your advantage and push your TM NGRS system to the limits reinforced gears are a must for long term reliability under increased stress. The Laylax EG Hard Gear Set is specifically designed for the Tokyo Marui Next Generation Recoil Shock (NGRS) gearbox and includes a hardened steel spur gear, sector gear and bevel gear. This gearset is a standard ratio set (18:1), intended to provide a great compromise between high speed and high torque, allowing you to take your build in either direction and still benefit from reinforced gears!

Redesigned for maximum compatibility with a wide variety of brands, the RetroArms CNC QSC Gearbox V2 is ideal for technical Airsofters working on a high-performance build which needs to last a lifetime. The set includes a Version 2 gearbox shell, carbon steel screws and a steel ball bearing spring guide and is ideally used for extremely high ROF or FPS builds. 

The shell itself is precision machined using CNC technology from the best aluminium around; 7075 T651, an ultra-hard alloy with similar strength properties to steel, boasting an ultimate tensile strength of 590 MPa compared to construction steel's 390 MPa. The quality of the machining simply cannot be overstated; every surface is flawlessly smooth and finished to perfection. 

Not content with making an absolutely beautiful gearbox from the finest materials around, the team at RetroArms has also put a lot of thought into the design aspect, improving on the original Tokyo Marui V2 gearbox in several areas. The piston tracks and selector plate rails have been redesigned for wider compatibility, the front of the gearbox is enlarged in every dimension to improve strength, "glue pockets" have been added around each bearing hole so they can be glued in and wider internal wiring routes for heavy gauge wiring, along with much, much more. If you're the techy type seeking a slick gearbox shell to start your build, the RetroArms CNC QSC Gearbox V2 is exactly that!

If you're the techy type seeking high-quality MOSFET wiring, FPS Softair has your back with the High Conductivity MOSFET Signal Cable! Made with 19 pure copper capillaries coated in chrome to enhance conductivity, this signal wire is specifically designed to provide maximum efficiency while avoiding being too thick and impinging on gearbox internals. We all know the pain of discovering your pinion gear has shredded your wiring. Thankfully, this FPS Signal Wire sidesteps this issue entirely!

The capillaries are protected with an FEP (Fluorinated Ethylene Propylene) coating, keeping the wire flexible to be routed through tight spaces, ideal for whatever custom setup you have in mind. If you're an ambitious tech with some wild custom build plans, FPS Softair High Conductivity MOSFET Signal Cable will definitely come in handy!

A replacement air nozzle intended for Tokyo Marui G3 based Airsoft Electric Guns constructed from polymer, an excellent spare part designed to replace damaged air nozzles with a durable replacement.

If you're fixing up an old AR36 AEG, the CYMA HOP-up Chamber with Bucking for AR36 AEGs is a great way to give it a new lease of life! A complete original replacement parts set including a polymer HOP-up chamber, HOP-up arm, bucking, nub and C-clip, giving you everything you need to revamp your HOP-up setup.

This set is compatible with TM-based AR36 AEG designs such as CYMA and Jing Gong, but won't fit the TM NGRS AR36 series. Whether you have a well-used AR36 which needs a refresh or you want to keep essential spares handy just in case, the CYMA HOP-up Chamber with Bucking for AR36 AEGs is a great addition to any AR36 AEG owner's toolbox!

If you're building out your MP5/SMG-5 AEG for high performance, the FPS Softair ERGAL Air Nozzle with Inner O-Ring for MP5/SMG-5 AEG will ensure it's reliable and accurate! Made from super-strong CNC-machined ERGAL, this nozzle is about as strong as AEG nozzles get, ideal for high-performance builds intended to last.

ERGAL is the trade name for 7075 aluminium alloy, known for its exceptional strength and low weight, rivalling some steels in strength while staying light as a feather by comparison. This nozzle also features an internal O-ring designed to minimise air leaks for maximum consistency and ensure the nozzle stays perfectly aligned for reliable feeding with every shot. If you need a super strong nozzle for a beastly MP5/SMG-5 AEG build, the FPS Softair ERGAL Air Nozzle with Inner O-Ring is the way to go!

The EPeS Airsoft Nozzle series is a line of super durable, high performing Airsoft Electric Nozzles designed to massively improve the performance and longevity of your airsoft gun.

If you're running a TITAN II ETU equipped AEG and are sick of dry-firing, add the GATE Magazine Sensor & Cable for TITAN II ETU! This sensor plugs into the TITAN II ETU sensor ports and detects when your magazine runs dry and stops it from firing. This part requires extensive modification, so we only recommend it for experts!

The Magazine sensor is programmable through the TITAN II itself and Gate Control Station App, allowing you to set the round count of your magazine so it cuts off when you run out of rounds. The sensor will also prevent firing when a magazine is not inserted, but this function can be turned on and off via the GCS app.

If you own a 2024 Specna Arms PRIME and need a replacement spring guide, then you are in luck! This is an original replacement part and will only fit in the ESA 2.1 receivers, found in the current Specna Arms PRIME models. Due to the unique shape of these receivers, this spring guide is unlikely to fit in other receivers without heavy modification.

The spring guide is constructed from steel, meaning it will be extremely durable and long-lasting. It also has ball bearings in its base that allow the guide to spin freely and redirect any stress on the gearbox shell and the spring itself.

If you have broken your APS UAR trigger with some heavy fingered action we have the solution! The APS Trigger for UAR AEG is a replacement part for the UAR AEG and includes the trigger itself, trigger axis pin and trigger spring.

If you're a realism fan running a TITAN II-equipped M4 AEG, this will please you! The GATE Magazine & Bolt-catch Sensor w/ Single Connector for TITAN II ETU combines the Gate bolt catch sensor and magazine sensor into a single unit, meaning you save a power port on the TITAN II for other accessories.

This set will require extensive modification to install, so we only recommend this set for advanced users and experience technicians willing to break out the power tools!

Does your AK need a touch of style? Add the 5KU PT-1/3 Stock Adapter for LCT/GHK/CYMA Side Folding AK Receiver and you're halfway there! This adapter allows Zenitco PT-1 or PT-3 multi-adjustable stocks to be mounted to an LCT, GHK or CYMA side folding AK receiver and should also work with most PT-1 and PT-3 clones. Made from robust steel to guarantee it will never fail, the PT-1/3 Stock Adapter from 5KU is the first step to styling up your side folder AK!

A set of tempered Bushings from Modify which comes included with installation tools.

A complete Switch Assembly for a variety of AEGs, which includes Low Resistance Wiring with either a Mini Tamiya or Deans Connector on the end.

If you are fortunate enough to have an AK or similar rifle with the superb Perun V3 Hybrid MOSFET installed, here is how you make it more realistic! The Perun Clicker is designed to work with the V3 Hybrid MOSFET and provides a tactile click when the trigger is pulled, along with a tactile reset. This gives the trigger a far more realistic feel, and while still nowhere near the feel of a real trigger, it is far more exciting to use than a standard Airsoft AEG trigger.

This SR25 Gearbox set by CYMA is designed to fit right into most SR25 / AR25 / AR10 style Airsoft Rifles / Guns. Included is a Piston, Cylinder, Gear Set, Tappet Plate, Nozzle. This GEARBOX set does not come with the shell, internals only.

If you've had motor issues and need a reliable replacement, here you go! The NUPROL High Torque Short Shaft Motor is an upgraded high torque motor for M4/AR-15 AEGs. This is the perfect upgrade part if you want to crank up your trigger response for some snappy semi-auto work or increase torque to handle high-power springs. The set includes a D-type pinion gear and pinion spring, both of which are pre-installed on the motor shaft.

If you're the techy type wanting to expand your Gate MOSFET's capabilities, the Gate Single Signal Wire 1x 60cm [1x 2ft] will be of use! A low resistance signal wire designed to allow various components in Gate's MOSFET ecosystem to be connected together, the Single Signal Wire is made from high quality, low-resistance wiring to maximise electrical efficiency.

If you're building out your M14 AEG, add the SHS Reinforced Tappet Plate for Version 7 Gearbox to keep it feeding reliably! This reinforced polymer tappet plate is designed for Version 7 gearboxes, making it a sure fit in most M14 AEGs and potentially compatible with other V7 gearbox-equipped designs.

The strong polymer construction of this tappet ensures your platform feeds reliably, even at high speed or in high FPS DMR builds. If you want your M14 to last the ages, this reinforced tappet plate belongs inside!

If you're upgrading your Cybergun/VFC SCAR-H, the ERGAL Air Nozzle with Inner O-Ring for VFC SCAR-H AEG from FPS Softair is essential for reliability and accuracy! Made from super-strong CNC-machined ERGAL, this nozzle is about as strong as AEG nozzles get, ideal for high-performance builds intended to last. Compatibility-wise, this nozzle is designed specifically for the VFC-manufactured SCAR-H (sometimes branded Cybergun) and may also fit D-Boys SCAR-H AEGs, but won't work with other SCAR-H replicas.

ERGAL is the trade name for 7075 aluminium alloy, known for its exceptional strength and low weight, rivalling some steels in strength while staying light as a feather by comparison. This nozzle also features an internal O-ring designed to minimise air leaks for maximum consistency and ensure the nozzle stays perfectly aligned for reliable feeding with every shot. If you need a top-of-the-range nozzle for your VFC SCAR-H custom build, the FPS Softair ERGAL Air Nozzle with Inner O-Ring for VFC SCAR-H AEG is ideal!

If you're the techy type running a Gate TITAN II and want more realism, this part is the key! The GATE Bolt Catch Button with Cable for TITAN II will bring the usual dummy bolt catch on any TITAN II equipped AEG to life, providing PTW-like functionality and realism!

Naturally, this part will require considerable modification to your receiver, bolt catch and gearbox shell, so make sure you either know what you're doing or consult a professional tech before ordering. This set includes the internal Bolt Catch button and the cable to connect it to your TITAN II, but doesn't include the external bolt catch itself.

If your PTS EPM1 mag is worn out, you must have done a lot of shooting! To fix it up, the PTS Syndicate EPM1 Spring Replacement Set is what you need! The set includes the feed spring, follower and associated parts, making it a fine replacement for magazine internals that have quite literally been through the wars and a great option for those who've lost their spring or follower to the carpet monster!

If you're planning to take full advantage of your Gate TITAN II ETU's advanced features, check this out! The Gate Divider Cable for TITAN II ETU; 1x Power & 2x I/O allows you to connect two accessories from the Gate ecosystem via a single port, perfect for those who want the bolt catch button, magazine catch sensor and more!

Naturally, this part will require some expertise to install and use correctly, though it is pre-wired, so you won't need the soldering iron. If you're the techy type looking for a seriously advanced AEG, the Gate Divider Cable for TITAN II ETU; 1x Power & 2x I/O is an integral part!

A series of Steel manufactured Motor Pinion Gears for either the TOP M60/M249 or Tokyo Marui AEG motors.

Motor worn out? The SHS Long Shaft Motor is a cheap, reliable replacement! This long shaft standard speed motor is designed for M4/AR-15, AR-9, P90, G3 and SMG-5 AEGs and is pre-fitted with a pinion spring and D-type pinion gear.

The D-type pinion is the strongest pinion design out there, eliminating the chance of this high-stress part loosening over time and damaging the motor shaft. Whether you need an affordable motor to get your pride and joy back into battle, or you're playing around with Airsoft internals and don't want to damage expensive parts, the SHS Long Shaft Motor is ideal!

Constructed from aluminium, this speed style flat surface trigger is great for quicker trigger manipulation and providing your rifle with the SPEEDQB aesthetic. It also features a ridged front texture for additional handling and grip. Lightweight, with a sweet metallic shine, this trigger is designed for Ares AMOEBA series.

Take your Vector to the next level with the Perun MOSFET For Krytac Kriss Vector, which gives you access to many advanced features such as programmable firing modes such as burst fire, active brake, binary trigger, system diagnostics and many more!

This MOSFET will maximise your Vectors' functionality, although be aware we only recommend this item for experienced technicians only.

If you're modernising your A&K PKM and need an optical sight on board, the Airsoft Artisan B51 20mm Picatinny Optics Mount for A&K PKM is the way to go. Made from flawlessly machined aluminium with realistic laser-engraved markings, this optic mount is designed specifically for the A&K PKM Machine Gun, offering a 19-slot 20mm Picatinny rail at 12 o'clock, ready for your choice of optical sight.

Styled after the real steel Zco B51 rail, this optics mount is significantly skeletonised, keeping weight to the bare minimum as the PKM is heavy enough by itself! Whether you're working on a modern Russian Armed Forces loadout or you run a PKM for its iconic looks, the Airsoft Artisan B51 20mm Picatinny Optics Mount for A&K PKM is a game changer!

If you plan to upgrade your AUG AEG and want a tasty new advanced MOSFET, you need this! The Perun AUG Mosfet system replaces your conventional trigger contacts with magnetic sensors coupled with a magnet installed directly on the trigger, improving trigger response and reliability while adding an absolute litany of programmable fire modes and MOSFET functions.

Fire mode options include burst modes of varying duration, reconfigurable fire selector positions, semi-automatic only, DMR/sniper delay, binary trigger and two-stage trigger. The AUG Mosfet also offers adjustable trigger sensitivity, adjustable active braking, pre-cocking with spring release and DSG mode, a specific mode for Dual Sector Gear setups. Make no mistake, the AUG Mosfet is every bit as advanced as its rivals, with the added benefit that all of the programming can be carried out using the fire controls of your AEG, with no need for PC or app connectivity!