All External Airsoft Parts & Attachments

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount will sort that out! This mount is designed for a wide range of magnifiers and clones, including those from EOTech, Vortex, Holosun, Sig Sauer and Trijicon (for detailed compatibility see the "Full Description").

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers the FAST Riser, FAST MRO Mount and FAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you want the elite, modern look for your primary and plenty of perks to go with it, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount belongs on your gat!

If you want to bring your M1928 Thompson AEG up a level in realism, this conversion kit will do it! The  Battleaxe Real Wood Furniture Kit for CM.051 M1928 Thompson comprises a real wood stock, a real wood vertical foregrip/handguard and a real wood pistol grip. 

To fit this conversion kit you will screws and mounts from the original CM.051, the kit only includes the real wood furniture. This kit is designed for the CM.051 Thompson AEG, it may fit other brands but modification will be required. If your CYMA Thompson needs an added dose of authenticity, a real wood kit is the way to go!

If you're a shotgun-wielding action hero, an Acetech Quark R Shotgun Tracer Unit will further your CQB advantage! Designed to mount to a wide range of M870-style shotguns via its innovative rotatable collar system, the Quark R is effectively the legendar Acetech Bifrost tracer unit resized to suit the menacing bore of 12-gauge style Airsoft shotguns.

This means you have access to a vast range of colour mode options, the ability to light up both Red and Green tracer BBs and a rainbow muzzle flash mode so bright it will even light up standard BBs for the first meter or so of their journey downrange. Power is supplied by an internal rechargable Li-ion battery which is charged via the included USB Type-C cable, keeping this beastly device cost-effective and convenient.

We all know how a tracer unit allows for rapid instinct aiming and how a tracer-weidling opponent makes an intimidating foe in CQB. Pair the Acetech Quark R Shotgun Tracer Unit with the mighty M870 and you have one lean, mean CQB domination machine!

If you own an M1A1 Thompson AEG replica, this will most certainly be of interest to you! Introducing the King Arms M1A1 Wood Furniture kit, a set containing a real wood stock, handguard and pistol grip all authentically profiled to match the real M1A1 SMG. The parts in this kit are all perfectly finished with satin varnish to provide a subtle sheen with wood grain showing through which even the best faux wood cannot match.

If you have been messing around with your SMG-5 AEG and you have lost your pins, CYMA has the cure! This original parts set includes 2 body pins, one for the trigger group and one for the rear receiver/stock. The pins are constructed from alloy and are compatible with CYMA SMG-5 AEGs but may also fit others, though we cannot guarantee it.

If you're in need of an RMR mounting plate for your Army Armament STACCATO pistol, then you've come to the right place! This plate is the perfect accessory for those wanting to mount a red dot sight to their pistol for some extra accuracy whilst out on the battlefield. It is constructed from aluminium and comes with the necessary steel mounting screws to attach this plate to your pistol.

It is compatible with red dot sights that have an RMR footprint, such as the PCS Miniature Red Dot Reflex Sight. If you're looking for a replacement RMR plate, or you need one to mount your desired red dot, the Army Armament Staccato RMR Mounting Plate is perfect for you.

If you're building a Navy Seal style SMG-7 and need to mount a suppressor, the Airsoft Artisan 14mm CCW Thread Adapter for TM/WE SMG-7 GBB will sort you out! This thread adapter is constructed from steel, mounting to 12mm CCW male barrel threads and providing common 14mm CCW male barrel threads for mounting suppressors, tracer units and other muzzle devices. 

Compatibility-wise, this adapter is designed specifically for Tokyo Marui's SMG-7/PM7A1 GBB SMG and the WE SMG-7 & SMG-8 GBB. If you run one of these slick little subguns and fancy a change from the standard flash hider up front, the Airsoft Artisan 14mm CCW Thread Adapter for TM/WE SMG-7 GBB is what you need!

A folding fore grip lovingly designed by NUPROL which fits onto 20mm RIS / RAS Rails to provide another manipulation point on a weapon which can be folded away when not in use.

If you're running a compact platform with a PTS Dead Air Sandman suppressor, your build is begging for the PTS Syndicate Dead Air KeyMicro Brake! This muzzle brake is constructed from steel and compatible with 14mm CCW male barrel threads, offering a uniquely aggressive shortened design with KeyMo suppressor compatibility. This means you can mount PTS Dead Air Sandman-S, Sandman or Sandman-K suppressors quickly and easily, along with any as-yet unreleased KeyMo interface suppressors from PTS.

Being licenced by Dead Air Silencers means the KeyMicro is as close to the real thing as you can get, with flawless machining throughout and a unique, modern design. Whether you're running a Sandman suppressor or not, the Dead Air KeyMicro Brake from PTS Syndicate is the perfect finishing touch to any SBR build!

If you have the strong desire to use a red dot and magnifier combination, but you also like to wear full face protection or a respirator, we have just what you need! The WADSN G43 Micro Magnifier Mount is compatible with the Ghost 3x Flip to Side Magnifier and replaces the standard flip to side mount with a raised mount designed to co-witness with EO style red dot sights with the PTS Unity Tactical FAST Riser, or T1/2 style red dot sights with the PTS Unity Tactical FAST Micro Mount. This mount can be raised and lowered to deploy, keeping the sides of your rifle slick and making it easier to manoeuvre with less chance of the magnifier snagging on gear, and making the setup more comfortable to sling. 

If you're looking for a way to make your giant G3 AEG more compact, the Jing Gong Sliding Stock for G3 AEGs will do the trick! Designed to fit Jing Gong and Tokyo Marui G3 AEGs, this stock offers 2 positions of adjustment. The stock can be deployed by pushing the adjustment lever on the bottom towards the left, after which it can be pulled out and into place.

The stock base and butt plate are constructed from high density polymer and the stock bars are alloy, keeping weight to a minimum and providing strength where needed. The butt plate boasts deep serrations for optimal grip in any weather conditions and the stock base includes a sling loop for conventional strap slings. Whether you're working on a G3A4 build or you want to fit your G3 into a smaller gun bag, the Jing Gong Sliding Stock for G3 AEGs is ideal!

If you want a pistol that can reach out and touch the enemy at long range, an extended inner barrel is just the thing. The WE PX001 Silencer And Extended Barrel Kit; 11mm CW is designed for the WE PX001 but is also compatible with most WE GBB pistols if you use your original HOP-up unit assembly.

The kit includes an 11mm CW threaded suppressor for 11mm CW female threaded barrels (WE, Armourer Works, CowCow and some others), a 6.03mm tightbore inner barrel measuring 189mm in length and HOP-up unit for the PX001 platform with a pre-installed bucking.

Please be aware, it is possible that the inner barrel will protrude through the tip of the suppressor when installed on certain compact pistols so make sure you measure up before ordering. We recommend adding the length of your existing inner barrel to the length of the included suppressor (138mm); if the length is equal to or greater than 189mm, the inner barrel will fit.

If you are building your dream tactical AK, a railed dust cover can be a great addition to give you more optic mounting options, and the elite tactical look. The 5KU 20mm Railed Tactical AK Receiver Cover is designed to work with Z-Co style handguards and provides a 17-slot 20mm Picatinny rail on its upper surface, and a hinge mechanism which connects it to a Z-Co handguard for functionality similar to the ASK-74U, making battery changes a breeze for those who run a top wired AK. If you are working on your own Spetsnaz build, your AK needs this!

If you've lost or damaged important parts from your CYMA's mag release, this should sort you out! The CYMA Bolt Catch is a replacement original part. Compatibility-wise, this set is intended for CYMA AEGs with alloy receivers, if your bolt catch got broken in a freak Airsoft accident, this set should get you back in the action!

An Ergonomic Pistol Grip for M4/M16/AR Platform Airsoft Electric Guns, which will provide a far more comfortable grip than traditional Pistol Grips. It is easy to install, and simply needs the removal of your original Pistol Grip to fit it, by re-installing the screws that secure it to your Gearbox. The Grip includes a Quick Release Motor Baseplate that also has an integrated Motor Height Adjustment. If you want to customise your AR Platform Airsoft Gun, then this is a great place to start.

A Steel constructed thread adapter for the AGM 002 series Spring-Powered Sniper Rifle, giving you a 14mm CCW Thread at the end of your barrel for the installation of standard Airsoft Suppressors with a matching thread. This is the perfect addition to anyone who wants to add a tactical look to their AGM 002, or conceal an extended inner barrel with a Suppressor.

If you're looking for a flashlight mount for your SMR-style handguard, the WADSN SMR Rail Offset Mount for M300/600 Scout Flashlights is ideal. This mount is constructed from CNC aluminium with steel mounting hardware and designed to mount SF Scout (M300 and M600) flashlights to Geissele Super Modular Rail (SMR) style attachment slots.

The mount offers several mounting positions for your Scout Light, allowing for 3 different heights so you can get your accessories perfectly positioned. The mount also allows for mounting with a slight forward extension to defeat "suppressor shadow" or mounting at the rear to keep the light away from your muzzle, depending on how you install your Scout Light. This mount is only for standard SF M300 and M600 Scout Lights and won't fit the Scout Light Pro series due to its differing mount.

If you're in search of flashlight mounting solutions for the rare but super-slick SMR handguard, the WADSN SMR Rail Offset Mount for M300/600 Scout Flashlights is what you need!

If you want to take pure advantage of the SSP5's incredible range and accuracy, an optics mount will get you there! The Novritsch 20mm Picatinny Top Rail for SSP5 GBB Pistol is compatible with all variants of the SSP5 GBB and is constructed from CNC machined aluminium for a perfect combination of low weight, high strength and flawlessly in-spec rail dimensions.

The Top Rail is available in two different lengths, a short version measuring approximately 6cm long and a longer version measuring approximately 10.1 cm. The rail is installed on the optics mount section of the fixed SSP5 outer barrel, meaning it says put while you tap tap tap that trigger for easier target acquisition and less chance your optic will take damage from recoil. If you are running your SSP5 as a primary, this mount is essential to make the most of its epic performance!

If you want to take pure advantage of the SSP5's incredible range and accuracy, an optics mount will get you there! The Novritsch 20mm Picatinny Top Rail for SSP5 GBB Pistol is compatible with all variants of the SSP5 GBB and is constructed from CNC machined aluminium for a perfect combination of low weight, high strength and flawlessly in-spec rail dimensions.

The Top Rail is available in two different lengths, a short version measuring approximately 6cm long and a longer version measuring approximately 10.1 cm. The rail is installed on the optics mount section of the fixed SSP5 outer barrel, meaning it says put while you tap tap tap that trigger for easier target acquisition and less chance your optic will take damage from recoil. If you are running your SSP5 as a primary, this mount is essential to make the most of its epic performance!

If you are working on your CQB build you must be looking for an extremely short outer barrel, and this one certainly is that! The 5KU 8.7" Aluminium Outer Barrel For M4/AR-15 AEG is compatible with most M4/AR-15 AEGs and is constructed from aluminium for a perfect balance between low weight and high strength. 

The barrel is threaded at the tip with common 14mm CCW male threading, meaning you can mount the most common muzzle devices on the market with ease, including tracer units, suppressors and flash hiders in various styles. Also present are grooves in the underside to allow a gas block or M4/AR-15 triangular front iron sights to be mounted, though this is not essential. If you need your M4 Airsoft rifle to be shorter this will get you halfway there, but don't forget you'll need a shorter inner barrel to match!

If you are building an M4 from the ground up or you want a new look for your M4/AR15 platform this 5KU Aluminium outer barrel is worth a look! This barrel is 14.5 inches in length, just like the standard carbine length M4 barrel but has a heavier profile towards the tip to simulate real-world heavy barrels which allow for more sustained fire before accuracy takes a dive due to heat build-up.

The barrel is constructed from two parts, the barrel itself and the barrel base which are secured together using a pair of steel grub screws. At the tip we have the Airsoft standard 14mm CCW male threading, leaving you with a wealth of options for what muzzle device you choose to mount. The profile of the barrel matches real M4 barrels throughout its length, making this a great choice as a replacement for those who don't like seeing what is clearly a skinny Airsoft barrel through the ports on their handguard. This barrel is designed for M4/AR15 AEGs and should fit the vast majority of them.

If you're fed up with missing out on kills while you're busy reloading, the Action Army Mag Carrier Foregrip for 20mm Picatinny Rail should be in your sights! Constructed from high-density polymer with steel screws and nuts, this device functions as a foregrip for 20mm Picatinny rails and also holds a single AAP-01 or EU-series GBB pistol mag; on board the pistol and ready to be slapped in double time!

When installed, your spare magazine is retained by a left/right swappable mag catch, meaning left or right-handed users can set Mag Carrier Foregrip up to suit them perfectly. The set also includes a pair of 20mm Picatinny side rails so you don't have to ditch your tactical flashlight or laser to use this nifty device. Please note, if you're planning to use this with a standard AAP-01 Assassin you'll need the AAP-01 Advanced Pistol Rail Set to mount it and it doesn't quite fit the AAP-01C due to alignment with its built-in rail.

If you're running a primary pistol which takes EU-series mags and is rocking a 20mm Picatinny frame rail, the Action Army Mag Carrier Foregrip for 20mm Picatinny Rail will have you back online after a reload in seconds!

If you have seen Saving Private Ryan and now you want a scoped Springfield rifle, this should get you there! The S&T 20mm Rifle Scope Mount for M1903A3 Springfield is constructed from aluminium and accepts common 20mm Picatinny scope rings, allowing you to fit whatever scope you desire to your Springfield provided the rings can be spaced to fit the mount. The spacing between the two rail sections is 7.5cm approximately, meaning most telescopic sights with separate rings will fit right on with the rings in the right position.

The mount replaces your rear iron sight and sits over the receiver when installed and requires additional screws (not included) to attach it to the rifle. Please note, this mount will not work with optics which have built-in 20mm rail mounts and is intended for use with optics which use separate scope rings.

If you want to add a western red dot sight or scope to your AK platform this adapter will do it! The M-ETAL 20mm Picatinny Railed Scope Mount for AK Side Rail fits AK-style side rails present on most AK-74 and AK-10x style AEG and GBB rifles and provides a 20mm Picatinny rail of approximately 17cm in overall length.

The mount attaches via a QD locking mechanism constructed from steel, meaning you can quickly add and remove your optic to suit the requirements of the mission and even switch between a red dot sight and telescopic sight if you have a mount for each optic. If your AK needs the benefits of western 20mm Picatinny sight options this adapter is a must!

If you're planning to style up your SSP18 GBB, the Novritsch SSP18 Magwell Extension V2 is ideal. Constructed from CNC machined aluminium and available in a plethora of metallic colour options, the Magwell Extension V2 is even compatible with the Novritsch HPA Adapter for EU series/Glock GBB platforms.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol. From an aesthetic standpoint, the Magwell Extension V2 works well with the Novritsch Compensator, transforming the SSP18 into a menacing beast with the elite looks of stylish, high-end real steel race guns. 

If you're planning to style up your SSP18 GBB, the Novritsch SSP18 Magwell Extension V2 is ideal. Constructed from CNC machined aluminium and available in a plethora of metallic colour options, the Magwell Extension V2 is even compatible with the Novritsch HPA Adapter for EU series/Glock GBB platforms.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol. From an aesthetic standpoint, the Magwell Extension V2 works well with the Novritsch Compensator, transforming the SSP18 into a menacing beast with the elite looks of stylish, high-end real steel race guns. 

If you're planning to style up your SSP18 GBB, the Novritsch SSP18 Magwell Extension V2 is ideal. Constructed from CNC machined aluminium and available in a plethora of metallic colour options, the Magwell Extension V2 is even compatible with the Novritsch HPA Adapter for EU series/Glock GBB platforms.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol. From an aesthetic standpoint, the Magwell Extension V2 works well with the Novritsch Compensator, transforming the SSP18 into a menacing beast with the elite looks of stylish, high-end real steel race guns. 

If you're planning to style up your SSP18 GBB, the Novritsch SSP18 Magwell Extension V2 is ideal. Constructed from CNC machined aluminium and available in a plethora of metallic colour options, the Magwell Extension V2 is even compatible with the Novritsch HPA Adapter for EU series/Glock GBB platforms.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol. From an aesthetic standpoint, the Magwell Extension V2 works well with the Novritsch Compensator, transforming the SSP18 into a menacing beast with the elite looks of stylish, high-end real steel race guns. 

If you're planning to style up your SSP18 GBB, the Novritsch SSP18 Magwell Extension V2 is ideal. Constructed from CNC machined aluminium and available in a plethora of metallic colour options, the Magwell Extension V2 is even compatible with the Novritsch HPA Adapter for EU series/Glock GBB platforms.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol. From an aesthetic standpoint, the Magwell Extension V2 works well with the Novritsch Compensator, transforming the SSP18 into a menacing beast with the elite looks of stylish, high-end real steel race guns. 

The G&G Armament Knights Armament 3 Prong Flash Hider matches the design of real steel flash hiders. It is constructed from steel making it extremely durable and sure to withstand any skirmish. It mounts to 14mm CCW threading, commonly found on most Airsoft assault rifles. To attach it, simply twist it onto your rifle's outer barrel and then you're good to go! It features a very aggressive design that will make any platform ten times more aggressive.

This flash hider also has the added realism of being licensed by Knights Armaments, the real steel firearm company. Although there are no visible trademarks on the flash hider itself, it gives you peace of mind knowing that this muzzle device has been made to the standards of a real steel manufacturer.

If you want a super realistic flash hider for your Airsoft platform, this is the one for you! Its steel construction and real steel design certify that this flash hider is perfect for any skirmisher seeking a realistic loadout.