All External Airsoft Parts & Attachments

If you want to add a bit of style to your Hi-Capa pistol, or you just want an extended magwell for faster and more reliable reloads, the Novritsch SSP1/SSP5 Magwell is what you need. This piece is constructed from CNC-machined Aluminium, guaranteeing a flawless and precise finish. This Magwell is compatible with Novritsch SSP1/SSP5 pistols but may also fit some other Hi-Capa pistols.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol.

Improve style and performance with the Novritsch SSP1/SSP5 Magwell, a simple upgrade that will make your reloads faster than the rest.

If you're rocking the AAP-01 or AAP-01C and need a red dot sight to finish it off, the Action Army RMR Plate & Raised Sights Set for AAP-01 is the key. This set includes a raised front sight with a light-enhancing insert and a fixed rear sight with an integral RMR footprint mount plate, allowing you to mount a micro red dot sight for improved low-light accuracy and faster target acquisition!

Both the front sight and the rear sight/mount plate are constructed from steel, making them extremely robust and ideal for the aggressive skirmisher. This kit fits both the original AAP-01 Assassin and AAP-01C Shinobi but isn't compatible with the Action Army Folding Stock Kit. If you run your AAP-01 as a sidearm but need to get on target faster, pair the Action Army RMR Plate & Raised Sights Set for AAP-01 with an RMR footprint red dot sight and get busy!

If you want to snipe with your KAR98K this should help you get there! The Double Bell Scope Mount For KAR98K is designed specifically for the Double Bell KAR98K and mounts to the receiver rail on the left side of the rifle, just below the rear iron sight. The mount is intended for scopes with a 20mm monotube and is constructed from alloy with steel screws and a steel release lever.

When choosing a scope for this mount we recommend looking for a scope with an objective lens of less than 30mm in diameter, a 20mm monotube and long eye relief due to the "Scout" style mount location positioned closer to the front of the rifle than the average scope mount.

Whether you're after another stock option for your MPX or MCX, or you need a stock for the beastly little VMP-2C, Airsoft Artisan has your back! The 1913/20mm Picatinny MCX Folding Stock is flawlessly machined from aluminium using CNC technology, with a grippy rubber butt plate at the rear and a robust steel hinge mechanism and mount.

Designed to mount to any 1913/20mm Picatinny stock interface, including stock adapters and those found on MPX, MCX and the shorter VMP-2 variants, this stock is as simple to operate as it is robust, with no fiddly buttons to operate the folding mech. Simply brace your thumb on the rear of your platform and lift the stock up, and you can effortlessly fold it to the left side. To redeploy the stock, the process is the same; it really is that simple!

In terms of build quality, this is a top-shelf item; machined to a high standard with a finish which will last the test of time, as we would expect from Airsoft Artisan. If you need a superbly made, fast to deploy and robust folding stock for a 1913/20mm Picatinny interface-equipped platform, look no further!

If you want a striking new look for your AK, the 5KU CNC Aluminium MK3 M-LOK Chassis for CYMA AK AEGs will do the trick! This CNC aluminium chassis transforms the AK design, bringing it into line with more modern platforms with M-LOK slots, a lengthy 20mm Picatinny rail up top and a dynamic, angular look. 

Compatibility-wise, this kit is designed for CYMA AK AEGs of the CM.04x and Cm.05x series using the VFC external construction style. It may fit other VFC-style AKs but won't fit AKs based on the TM AK-47 AEG (CM.028, CM.5xx, CM.03x & JG AKs) nor will it fit AKS-74U AEGs. If your AK needs a 21st-century facelift to compete with modern designs, kit it out with the CNC Aluminium MK3 M-LOK Chassis for CYMA AK AEGs from 5KU!

If you own a CM.127, CM.127S or ASG XP17 Challenger and your mag release has gone missing or broken it's your lucky day! The CYMA Magazine Catch & Spring for CM.127 AEP is a replacement original parts set for the CM.127 and CM.127S AEPs but should also fit the ASG XP17 Challenger AEP. The set includes the mag catch itself and the spring.

Keep the weight of your bipod-equipped rifle down with this featherweight M-LOK mount from ARES. This mount enables you to add Atlas-style bipods to your M-LOK front end. The Atlas style of bipod mounts using a large cylindrical lug and is often seen on L96s and variants in British army service. 

A replacement flash hider for any Airsoft weapon with a 14mm counter-clockwise thread. It's designed to replicate the original iconic AKM flash hider.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

If you're building out your AK to match the latest real steel builds, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is essential. Based on real steel Zco-style red dot risers, this aluminium component fits replica Zco-style handguards such as the 5KU Lightweight Zco-style Lower Handguard. It will only attach to these styles of handguards due to the unique attachment interface.

Atop the riser is a section of 20mm Picatinny rail, perfect for mounting a red dot that matches the modern Russian design. If your modern Zco-style AK requires optic space for longer-range engagements, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is the piece of equipment for you.

If you need to mount an optic on your VZ.58, this is essential! The Ares Side Rail Mount for VZ.58 AEG is compatible with the Ares and Delta Armory VZ.58 AEGs and allows a VZ.58 scope mount to be fitted. The set includes the side rail itself and the mounting bolts. Please note, this side rail is only compatible with Ares VZ.58 scope mounts and is NOT compatible with AK or SVD mounts. 

If you're decking out your KeyMod handguard and need a hint of style, the 5KU B5 KeyMod Hand Stop; Solid is the perfect finishing touch! Made from CNC-machined aluminium and finished in spicy metallic red, the Solid KeyMod Hand Stop is ideal for topping off a speed soft or 3-gun style build.

The Hand Stop can be mounted in either orientation and can be used to prevent your hand from overshooting the handguard or to pull back against as a makeshift foregrip.

Does your AK need a touch of style? Add the 5KU PT-1/3 Stock Adapter for LCT/GHK/CYMA Side Folding AK Receiver and you're halfway there! This adapter allows Zenitco PT-1 or PT-3 multi-adjustable stocks to be mounted to an LCT, GHK or CYMA side folding AK receiver and should also work with most PT-1 and PT-3 clones. Made from robust steel to guarantee it will never fail, the PT-1/3 Stock Adapter from 5KU is the first step to styling up your side folder AK!

A Steel manufactured Fire Selector for LCT branded AKM models; ideal as a spare part or replacement.

If you're looking for an interesting flash hider to top off your build, the PTS BattleComp 2.0 Flash Hider is the stylish touch your primary needs! A detailed, licensed replica of the real steel BattleComp 2.0, this flash hider is made from steel and ready to mount on any 14mm Clockwise (CW) male threaded outer barrel.

The real steel BattleComp 2.0 came about following the success of earlier BattleComp muzzle brakes, designed for military applications which require compatibility with QD suppressors. Like the real thing, the PTS BattleComp 2.0 is compatible with "A2 Birdcage" compatible suppressors, including KAC QD style suppressors and the B&T Rotex QD suppressor. If your primary has a 14mm clockwise threaded barrel and it needs a top notch muzzle device, the PTS BattleComp 2.0 Flash Hider is ideal!

A precisely engineered and uprated loading handle for the terrifying ASW338LM Airsoft sniper rifle from Ashbury Precision Ordnance.

This is for those of you looking for quicker reloads as well as making your Action Army Pistol look 'blinged out'. If you love your pistol and want to treat it to something special, this makes a nice addition to your mod. But how does it reduce reload speeds you ask? Well the magwell has been designed with a wide flare and bevelled inner surface to help guide your magazine into your pistol smoothly and instantaneously; "Eyes up" reloading will become second nature to you, perfect for competition shooting as well as skirmishing.

If you have a TM MK23 you know that bad boy deserves a tactical flashlight or laser aiming module! The Laylax 20mm Picatinny Rail Adapter Version 2 is designed for exactly that and mounts to the ironically named "universal rail" on the MK23 dust cover/frame to provide a rail which actually is universal, the 20mm Picatinny rail.

The adapter itself is constructed from aluminium and has a matt black anodised finish applied, blending perfectly with the MK23's stealthy form. The rail is approximately 7cm long with 5 slots machined in and has a gentle bevel at the front to aid with re-holstering.

If your AK is equipped with an ALFA-style lower handguard, this is the upper handguard you need to complete the build! The 5KU ALFA 20mm Picatinny Upper Handguard for AK ALFA Handguards is CNC machined from aluminium and provides a 20mm Picatinny rail up top, ready for a laser, flashlight or any other 20mm rail-mounted accessory. 

This upper handguard is designed specifically to be paired with the 5KU ALFA lower handguard, mounting via the threaded holes along each side. The set also includes the screws you'll need to bolt your new upper handguard to your ALFA lower handguard. If your ALFA style lower handguard is looking a bit lonely, add the 5KU ALFA 20mm Picatinny Upper Handguard for AK ALFA Handguards to complete the look!

If you like to set up on the battlefield, you need a bipod for better accuracy! This Battleaxe Quick Detach Bipod clips onto the front of your SVD's receiver, and then it's ready to be deployed! Its adjustable legs allow a height of 16cm to 22cm, so you can set it up just right for the battlefield's terrain.

As it is made of aluminium, it doesn't add much extra weight to the overall platform, only 420 grams. This is an excellent choice for sneaky skirmishers who wait with baited breath for their opponents to cross their sights. Plus, if you ever get sick of it, its quick detach feature allows you to unclip it instantly!

If you want your SigAir MPX even shorter than it comes from the factory this kit will do it! The Laylax Outer Barrel Base & Battery Block Set for SigAir MPX includes a super short outer barrel base and the Laylax Battery Block, allowing you to install a barrel extension or a suppressor which runs beneath the handguard for the integrally suppressed look. 

This part replaces your original outer barrel with an aluminium barrel base measuring 8.5cm overall length, with 4.5cm protruding ahead of the receiver when installed. Also included is the Laylax battery block, designed to keep your battery contained within the handguard when your barrel is pointed down. The battery block won't fit over a suppressor but if you decide to fit a barrel extension it should fit any with a diameter of less than 19mm. 

If you fancy turning your 9" "HAVOC" under barrel launcher into a stand-alone platform then this is the product for you! The EMG KAOS Conversion Kit provides the chassis for mounting a pistol grip and stock so you can carry your launcher as a powerful sidearm. It is compatible with the EMG 9" "HAVOC" Launcher only, as it has been designed to accommodate the specific shape and size of that MOSCART launcher.

The "HAVOC" launcher slides onto the bottom section of the 20mm Picatinny rail, giving you the full top section for some tactical accessories like a scope or flashlight, whatever looks the most menacing! The Chassis is compatible with real steel or GBBR pistol grips and buffer tube spacers/sling plates. The buffer tube is compatible with regular M4/AR-15 stocks so you can customise this conversion kit to make it unique to you!

The chassis and buffer tube are both constructed from durable alloy, sure to survive anything a skirmish has to throw at you. The buffer tube threads into the chassis, just make sure you know what you're doing before installation to avoid damaging anything. If you fancy a stand-alone launcher as a sidearm, the EMG KAOS Conversion Kit For 9" HAVOC Grenade is the easiest way to convert an under-barrel launcher into one!

The KAR98k Steel Scope Rail Mount from Vector Optics mounts to your KAR98k receiver (following modification - see Special Instructions) and provides two slots of Picatinny rail, ideally suited to mounting a rifle scope with separate mount rings. This mount is intended for use on real rifles, but does match the geometry of the Airsoft receivers should you choose to add it to your Airsoft build.

If you're looking for a fresh stock to modernise your MPX or MCX, the Airsoft Artisan 1913/20mm Picatinny Lightweight MCX Folding Stock is a great option. Manufactured to the lofty standards we expect from Airsoft Artisan, the Lightweight MCX stock is made from CNC-machined aluminium with a steel mount/folding mechanism and a grippy rubber butt plate.

Designed to mount to any 1913/20mm Picatinny stock interface, including stock adapters and those found on MPX, MCX and the shorter VMP-2 variants, this stock is as simple to operate as it is robust, with no fiddly buttons to operate the folding mech. Simply brace your thumb on the rear of your platform and lift the stock up, and you can effortlessly fold it to the left side. To redeploy the stock, the process is the same; it really is that simple!

A lightweight alternative to the standard MCX Folding Stock, this stock is significantly skeletonised, with bevelled edges and weight-reducing recesses throughout, along with a pair of M-LOK slots on top for a cheek riser(available separately). Whether you're in search of a stock for your VMP-2C to improve stability or you're after new bits to tart up your gucci MCX build, the Airsoft Artisan 1913/20mm Picatinny Lightweight MCX Folding Stock brings both quality and aesthetics to the table!

If you're running a VZ.58 and want to add optics, lasers, flashlights and grips, the Ares CNC Aluminium 20mm Picatinny Handguard for VZ.58 AEG is what you need. Compatible with the Ares and Delta Armory VZ.58 AEGs, this handguard is made from CNC machined aluminium, giving it flawless machining and perfectly in-spec rails, ready for your mission essentials. 20mm Picatinny rails are present at the 3, 6, 9 & 12 o'clock positions with weight reduction ports in various places to keep your front end light and agile. 

Installation is relatively simple, requiring you to remove your existing handguard via the retention pin and replace it with this in the same way you would when installing your battery. Another perk of adding this RAS handguard is the ability to use an external battery box for more power on tap and easier battery changes. If you're going for the PMC look with your VZ.58, the Ares CNC Aluminium 20mm Picatinny Handguard for VZ.58 AEG is what you need to complete it!

If you're modernising your A&K PKM and need an optical sight on board, the Airsoft Artisan B51 20mm Picatinny Optics Mount for A&K PKM is the way to go. Made from flawlessly machined aluminium with realistic laser-engraved markings, this optic mount is designed specifically for the A&K PKM Machine Gun, offering a 19-slot 20mm Picatinny rail at 12 o'clock, ready for your choice of optical sight.

Styled after the real steel Zco B51 rail, this optics mount is significantly skeletonised, keeping weight to the bare minimum as the PKM is heavy enough by itself! Whether you're working on a modern Russian Armed Forces loadout or you run a PKM for its iconic looks, the Airsoft Artisan B51 20mm Picatinny Optics Mount for A&K PKM is a game changer!

If you want to bring your M1928 Thompson AEG up a level in realism, this conversion kit will do it! The King Arms Wood Conversion Kit comprises a real wood stock, a real wood vertical foregrip/handguard and a real wood pistol grip, along with an alloy butt plate and steel mounting screws.

To fit this conversion kit you will need the sling mount from your original stock and the mounting bolts for the stock, foregrip and pistol grip. As with any conversion kit, this kit may require modification to fit but should be compatible with the King Arms M1928 AEG, the Cybergun M1928 Thompson AEG and the CYMA CM.051 AEG. If your Thompson needs an added dose of authenticity, a real wood kit is the way to go!

If your ARCTURUS AK uses the MOE-style pistol grip and your base plate has gone walkies, here is the perfect replacement. The Pistol Grip Base Plate for AK-47/74 AEG is only compatible with ARCTURUS AKs which use the MOE-style pistol grip, as seen in the following example: ARCTURUS AK TWS AEG. The base plate is constructed from high density polymer, just like the original.