- CNC Aluminium construction
- For high performance and DMR builds
- Compatible with all standard AEG gearboxes
If you are building up a DMR AEG you will want one of these inside! The Power CNC Aluminium Hybrid Piston head from Gate combines innovations from the AEG piston head market with those from Sniper rifles to allow the weight of the piston head to be adjusted to help reduce power loss when using heavy BBs (>0.3g). With the Hybrid Piston Head you have the choice; either install the piston head alone for improved air seal, longevity and reduced friction, or if you're building a DMR you can add the included weight pads to increase the weight of the piston, and reduce lost FPS when using BBs weighing over 0.3g. Perfect for a DMR build, but equally great in a standard AEG build, Gate has really broken the mould with this one!
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship worldwide, delivering not only to the UK but to most of the EU and select Worldwide locations as well. We provide a working day-by-road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
Approx.
UK Next Day
£8.95
Approx.
Highlands / Islands
£24.99*
Approx.
Saturday
£14.95
Approx.
* Scottish Highlands, Islands, and EU post prices can vary wildly. Prices range from £8.99 to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be delighted with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The Gate Power CNC Aluminium Hybrid Piston Head is the perfect piston head for a DMR build, but can also produce phenomenal results in a standard AEG build. The piston head is equipped with ball bearings for smooth, friction-free running and includes a pair of spacers which can be used to increase the weight of the piston to prevent FPS loss when using heavy BBs.
Being constructed from aluminium gives this piston head superb rigidity and the ability to handle springs of any strength while keeping the part light enough to be used in standard builds without adding strain to the internals. Included with the set is an angle of engagement (AOE) correcting spacer which can be installed to help ensure perfect gearbox timing and reduce wear in the long term.
For a DMR build, you won't find a more suitable piston head. The ability to alter the weight of the piston head is God's gift to the DMR user with high standards and the desire to tune to perfection, and if you are working your way up to a DMR build with incremental upgrades you can use the piston head immediately and add the additional weight pads when you want to bend the laws of physics!
Features
- CNC Aluminium construction
- Ball bearing equipped - Reduced wear
- Designed for DMR and high performance builds
- Includes AOE correcting spacer
- Includes weight increasing pads - Prevents FPS loss with heavy BBs
- Piston head weight (without bearings/pads) - 4.7g
- Also suitable for standard gearbox builds
- Compatible with all standard AEG gearboxes (not NGRS, BOLT, or other non-standard gearbox designs)
Package Includes
- Gate Power CNC Aluminium Hybrid Piston Head
Specification
General
|
Internal Part Type
|
Piston Head & Parts, Piston Head, Piston Head O-Ring,
|
|---|---|
 |
 |
Weight and Dimension
 |
Approx. 0.026kg
|
|---|
Construction
 |
Blue
|
|---|---|
 |
CNC machined Aluminium with rubber O-ring and pads, steel washers and screw.
|
|
Internal Part Construction
|
Steel, Aluminium, Rubber,
|
Part Specific
|
Part for Power Source Type
|
Electric
|
|---|---|
 |
|
|
Package Includes
|
Piston Head
|
Electric Part Specific
|
Gearbox Version Compatibility Variant
|
Most Airsoft AEG
|
|---|
Size guide
Parts Fitting
Upgrades and Downgrades should only be undertaken by experienced players, or Airsoft Technicians. Please note, changing any internal parts of a weapon voids its warranty unless done in-house by our staff.
Please ensure that when fitting parts the part purchased is the correct part, as once a part has been fitted we cannot accept return.
We do know that players love to tinker, so we're here to give you help should you require it, and if needed you can get in touch with our workshop for more help!
Unique Parts
Please note that some parts may be unique to a specific brand of weapon. For example: Parts for an ASG M4A1 may not fit an ICS M4A1.
Parts from the same brand typically have a high chance of fitting, though be warned, some replicas use unique parts, so please ensure the part will fit before you attempt to fit it.
If you require help with fitting any parts feel free to get in touch with us via our Contact Us Page.
For more information with fitting parts, or should you require help, feel free to get in touch with our Workshop Department via our Contact Us Page.
Terms and Conditions relating to parts fitting can be read on our Terms and Conditions Page.