Airsoft Mounts

These scope rings are designed to hold an Airsoft rifle scope with a tube diameter of 25mm. Scope rings are useful as they allow you to attach your scope to very small sections of Picatinny rail, such as the small sections often found on sniper rifles. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. 

Being a two-piece design they are very easy to install. The scope rings mount to standard 20mm Picatinny rail sections. To attach them to your rifle scope you must use an Allen key to take off the top sections of the rings, then place your scope in and reattach the top sections of the rings. 

One of the few problems with old-school cool like the SMG5K series of AEGs is that you are rather limited in rail mounting space, meaning your mission essential equipment that makes you a true operator has to be left behind. Ask the US Navy SEALs, they are known to use pipe clips and zip ties to attach rails to their MP5SD6s. You no longer have to resort to this pure bodgery, with the Extended top rail mount from CYMA you now have a Picatinny scope mount with forward M-LOK sections for tactical weapon lights, lasers, battery boxes, or anything else you need. This is all kept at the 12 o'clock position, keeping your ambi friendly SMG just that. 

A KeyMod attachment for KeyMod Rails which provides a Quick Detach Sling Loop Mounting Point, making it easy to quickly add and remove slings from your rifle.

If you're a talented skirmisher with skills to showcase, the Novritsch GoPro Adapter for 20mm Picatinny Rails should suit you perfectly. This CNC aluminium mount attaches to any 20mm Picatinny rail and provides a mount for GoPro-style action cameras with the socket mount. Please note, the barrel-mounted rail shown in the images is for demonstration purposes only and is not included with the set. 

The mount can be fitted to position the camera on the left or right side of your primary and only minimally affects the weight distribution and balance thanks to its lightweight aluminium build. If you have epic Airsoft moments to record for the ages, the Novritsch GoPro Adapter for 20mm Picatinny Rails is what you need!

A 20mm RIS compatible scope mount ring, designed to enable users to mount VORTEX's high quality optics onto their Airsoft guns or real firearms.

If you're running an SSG10 A3 and want it shooting even better than it already does, the Novritsch SSG10 A3 TDC HOP-up Rail Mount will get you there. This part is a unique design from Novritsch, specifically for the A3 variant of the SSG10 and is not compatible with other variants. 

The set includes a 20mm Picatinny rail mount with a TDC HOP-up dial built in and is supplied with the parts you'll need to install it, other than a drill. Be warned, this set requires precision to install and if done wrong, can be catastrophic. As such, we only recommend this to Airsofters experienced with tech work and handy with an electric drill. 

The advantages of TDC HOP-ups are numerous, including providing a stronger HOP-up effect and reducing side-to-side shot deviation. The numerically marked TDC dial also allows you to keep track of your HOP-up settings for different BB weights, a fantastic feature for the serious sniper. The integral 20mm Picatinny rail also allows PEQ lasers, RunCam or Novritsch ClipCam Cheater-Catcher action cameras to be installed in the optimal position. If you want to up the performance of your SSG10 A3 to the maximum, the Novritsch SSG10 A3 TDC HOP-up Rail Mount is what you need!

A set of high profile mount rings for scopes up to 30mm wide, which attaches to a 20mm rail and provides a solid platform for you to use your optic.

Customise your MLOCK handguard with this easy to attach Harris lug for use with bipods and slings. Constructed from aluminium, the attachment is sturdy and well-weighted.

A Scope Ring for compatible Riflescopes, which will help you mount your Riflescope to perfection, eliminating potential error caused by mounting your Sight by hand. If you're a stickler for precision, then there's no excuse to not be using these rings on your rifle.

This Sight Mount from Vortex Optics is crafted from Aluminium and features a One-Piece design, with the exception of the top of the Mount Rings. It is designed for 30mm Optic Tubes and has a Center Height of 40.39mm / 1.59". The Cantilever design of the Mount makes it especially effective for installing Short Dot-style Optics to a flat-top Receiver such as the AR-15. Being made from Aluminium, it is lightweight and effective, but has been so well made it is covered by Vortex's VIP Lifetime Warranty.

A special mounting ring with three 20mm short rails on top and sides. Allowing additional accessories like lasers or lights to be attached.

If you are rocking a KAR98k but you want some modern glass, this is a great way to get the job done! The 20mm Picatinny rail mount from Double Bell is designed to fit to their KAR98K sniper rifle and provide a 20mm rail above the receiver, allowing you to mount modern optical sights. The rail mounts into the rear sight mounting apparatus and provides you with 17 slots of 20mm rail, plenty to mount whatever you like. We advise against adding a PEQ, flashlight and T1 but it's your gun and there is enough space, just be ready to run if a reenactor spots you!

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount will sort that out! This mount is designed for old-school magnifiers which use a ring-style mount, offering compatibility with most 30mm tube magnifiers including the Vector Optics Flip To Side Magnifier.

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers the FAST Riser,FAST MRO Mount and FAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you're running face protection and don't want to ditch your magnifier, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount is what you need!

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount will sort that out! This mount is designed for old-school magnifiers which use a ring-style mount, offering compatibility with most 30mm tube magnifiers including the Vector Optics Flip To Side Magnifier.

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers the FAST Riser,FAST MRO Mount and FAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you're running face protection and don't want to ditch your magnifier, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount is what you need!

If you've scratched up your CM.039's rail and you need a replacement, this is exactly what you need! The CYMA 20mm Picatinny Optics Mount for CM.039 AK AEG is a replacement original part for the CYMA CM.039 and CM.039C AEGs but unfortunately won't fit other AKs. The set includes the mounting bolts and the rail itself. 

If you have plans to build out a Krytac Maxim 9 as a primary pistol you will want this! The Krytac SilencerCo Maxim 9 GBB Pistol 20mm Picatinny Rail Kit provides a single 20mm rail which can be mounted to the KeyMod slots on the bottom of the Maxim 9 suppressor, and is the perfect length to look just right.

20mm Picatinny rails allow you to mount a laser aiming module or a tactical flashlight to your silent killer and assist your efforts in cleaning up the CQB site. For those who see the potential in the Maxim 9 to be the ultimate CQB tool, this rail kit will be an asset!

A 20mm RIS compatible raised scope mount ring, designed to raise up optics to your eye-level, or fit larger scopes onto your Airsoft guns.

If you want to snipe with your KAR98K this should help you get there! The Double Bell Scope Mount For KAR98K is designed specifically for the Double Bell KAR98K and mounts to the receiver rail on the left side of the rifle, just below the rear iron sight. The mount is intended for scopes with a 20mm monotube and is constructed from alloy with steel screws and a steel release lever.

When choosing a scope for this mount we recommend looking for a scope with an objective lens of less than 30mm in diameter, a 20mm monotube and long eye relief due to the "Scout" style mount location positioned closer to the front of the rifle than the average scope mount.

If you're rocking a Unity Fusion mount, the WADSN Offset Rail for Fusion Mounts should interest you! This CNC aluminium mount is compatible with Unity-style Fusion mounts and provides an offset 20mm Picatinny rail with 5 rail slots, ideal for flashlights and laser aiming modules. This rail mount is only compatible with Fusion style mounts and includes two steel bolts to mount it and the correct Allen key so you don't need to rummage in your toolbox!

The perfect way to securely mount your scope onto your Airsoft gun, allowing you to get the best possible accuracy from your scope when aiming. 

If you're rocking the AAP-01 or AAP-01C and need a red dot sight to finish it off, the Action Army RMR Plate & Raised Sights Set for AAP-01 is the key. This set includes a raised front sight with a light-enhancing insert and a fixed rear sight with an integral RMR footprint mount plate, allowing you to mount a micro red dot sight for improved low-light accuracy and faster target acquisition!

Both the front sight and the rear sight/mount plate are constructed from steel, making them extremely robust and ideal for the aggressive skirmisher. This kit fits both the original AAP-01 Assassin and AAP-01C Shinobi but isn't compatible with the Action Army Folding Stock Kit. If you run your AAP-01 as a sidearm but need to get on target faster, pair the Action Army RMR Plate & Raised Sights Set for AAP-01 with an RMR footprint red dot sight and get busy!

If you're running the PTS FAST LPVO mount and want a quick way to engage close-range threats, the PTS Syndicate Unity Tactical Top Ring for FAST LPVO Mount w/MRDS Adjustable Plate lets you do just that. This set includes an upper scope ring for the PTS FAST LPVO mount, a screw set and the PTS MRDS modular mount plate.

Designed to fit practically any common MRDS footprint, the PTS Modular MRDS plate mounts to the top of the included ring, which itself can be used to replace either the front or rear ring on your PTS FAST LPVO mount. The MRDS mount is confirmed to fit Docter, RMR®, Shield RMS/ RMSc, Sig Romeo Pistol Red Dot Sight, C-more, Sightmark M-Spec, Holosun-K and DeltaPoint® Pro footprint red dot sights.

If you've ever missed a kill because you were busy adjusting magnification, the PTS Syndicate Unity Tactical Top Ring for FAST LPVO Mount w/MRDS Adjustable Plate with an MRDS installed will ensure that never happens again!

If you're running the PTS FAST LPVO mount and want a quick way to engage close-range threats, the PTS Syndicate Unity Tactical Top Ring for FAST LPVO Mount w/MRDS Adjustable Plate lets you do just that. This set includes an upper scope ring for the PTS FAST LPVO mount, a screw set and the PTS MRDS modular mount plate.

Designed to fit practically any common MRDS footprint, the PTS Modular MRDS plate mounts to the top of the included ring, which itself can be used to replace either the front or rear ring on your PTS FAST LPVO mount. The MRDS mount is confirmed to fit Docter, RMR®, Shield RMS/ RMSc, Sig Romeo Pistol Red Dot Sight, C-more, Sightmark M-Spec, Holosun-K and DeltaPoint® Pro footprint red dot sights.

If you've ever missed a kill because you were busy adjusting magnification, the PTS Syndicate Unity Tactical Top Ring for FAST LPVO Mount w/MRDS Adjustable Plate with an MRDS installed will ensure that never happens again!

If you're building out your AK to match the latest real steel builds, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is essential. Based on real steel Zco-style red dot risers, this aluminium component fits replica Zco-style handguards such as the 5KU Lightweight Zco-style Lower Handguard. It will only attach to these styles of handguards due to the unique attachment interface.

Atop the riser is a section of 20mm Picatinny rail, perfect for mounting a red dot that matches the modern Russian design. If your modern Zco-style AK requires optic space for longer-range engagements, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is the piece of equipment for you.

If you need to mount an optic on your VZ.58, this is essential! The Ares Side Rail Mount for VZ.58 AEG is compatible with the Ares and Delta Armory VZ.58 AEGs and allows a VZ.58 scope mount to be fitted. The set includes the side rail itself and the mounting bolts. Please note, this side rail is only compatible with Ares VZ.58 scope mounts and is NOT compatible with AK or SVD mounts. 

The KAR98k Steel Scope Rail Mount from Vector Optics mounts to your KAR98k receiver (following modification - see Special Instructions) and provides two slots of Picatinny rail, ideally suited to mounting a rifle scope with separate mount rings. This mount is intended for use on real rifles, but does match the geometry of the Airsoft receivers should you choose to add it to your Airsoft build.

If you're feeling that carry handle vibe and want an optic on top, the Airsoft Artisan T1/T2 Red Dot Mount for M4A1/M16 Carry Handle is what you need. Following the real steel trend of mounting modern optics to the old school AR carry handle, this mount is made from CNC-machined aluminium with the Aimpoint Micro mounting standard/footprint, making it compatible with most T1 and T2 clones, along with other optics with the same footprint.

This mount is compatible with practically any M4/M16 carry handle, including A1 and A2 fixed carry handles and M4A1/M16A4 removable carry handles. Please note, depending on which optic you choose, you may need to source longer screws to attach your optic to this mount to guarantee compatibility. If you're working on an old meets new build, the Airsoft Artisan T1/T2 Red Dot Mount for M4A1/M16 Carry Handle is an essential part!

If you like the style of micro red dots and want to mount one on your rifle at a comfortable height, then you need this! The PTS Syndicate Unity Tactical Fast™ MRDS mounts on 20mm Picatinny rails and includes an MRDS Adjustable Plate that fits most micro red dot footprints. These footprints include Docter, RMR®, Shield RMS/ RMSc, Sig Romeo Pistol Red Dot Sight, C-more, Sightmark M-Spec, Holosun-K and DeltaPoint® Pro footprint red dot sights.

It is constructed from CNC 6000 aluminium, making it durable and lightweight, perfect for agile skirmishers who like to keep a low profile on the battlefield. If you aim best with a micro red dot and want to comfortably mount one on something other than your pistol, you need the PTS Syndicate Unity Tactical Fast™ MRDS Mount w/MRDS Adjustable Plate!

If you're running a compact platform with limited rail space or simply seek a sprinkle of "gucci" for your build, the Airsoft Artisan K High Rise Mount with Extension for T1/T2 Red Dot Sight is well-suited to the task! Made from precisely machined aluminium and patterned after an up-and-coming alternative to popular "Skiff" and "Hydra" mounts, the K High Rise Mount is phenomenally built and packs a lot of functionality into a relatively simple-looking mount!

The set includes what is known as a "Diving Board", a section of rail which attaches to the front of the optic mount, ideal for a PEQ or DBAL laser unit. This can be removed to reduce weight and improve field of view, revealing the minimalist skeletonised design of the mount itself. On each side, the K High Rise Mount features a single M-LOK attachment slot, allowing you to mount an M-LOK rail to each side (with the M-LOK nut removed) to add even more accessories, should the mission require it.

The K High Rise Mount is designed for 20mm Picatinny rails and is compatible with red dot sights using the Aimpoint Micro footprint/mounting standard, including most T1 and T2 clones. If your mates all run Hydras and Skiffs, take a walk on the wild side and make them jealous with the Airsoft Artisan K High Rise Mount with Extension for T1/T2 Red Dot Sight!

If you're modernising your A&K PKM and need an optical sight on board, the Airsoft Artisan B51 20mm Picatinny Optics Mount for A&K PKM is the way to go. Made from flawlessly machined aluminium with realistic laser-engraved markings, this optic mount is designed specifically for the A&K PKM Machine Gun, offering a 19-slot 20mm Picatinny rail at 12 o'clock, ready for your choice of optical sight.

Styled after the real steel Zco B51 rail, this optics mount is significantly skeletonised, keeping weight to the bare minimum as the PKM is heavy enough by itself! Whether you're working on a modern Russian Armed Forces loadout or you run a PKM for its iconic looks, the Airsoft Artisan B51 20mm Picatinny Optics Mount for A&K PKM is a game changer!