Airsoft Under £50

If you have the strong desire to use a red dot and magnifier combination, but you also like to wear full face protection or a respirator, we have just what you need! The WADSN G43 Micro Magnifier Mount is compatible with the Ghost 3x Flip to Side Magnifier and replaces the standard flip to side mount with a raised mount designed to co-witness with EO style red dot sights with the PTS Unity Tactical FAST Riser, or T1/2 style red dot sights with the PTS Unity Tactical FAST Micro Mount. This mount can be raised and lowered to deploy, keeping the sides of your rifle slick and making it easier to manoeuvre with less chance of the magnifier snagging on gear, and making the setup more comfortable to sling. 

A 50rnd Extended Gas Magazine for a range of ASG Gas Replicas, including the B&T USW, the Shadow 2, SP-01 and CZ 75. If you own one of these replicas and want the ability to throw 50 BBs down range in a hurry, then the firepower increase of a 50rnd Magazine cannot be overstated.

If you are looking for a suppressor for your lil' AK, you have found the right one. The real world PBS-4 is designed for use on the AKS-74U rifle, but has also been seen in use on full length AK74s!

One magazine probably isn't going to be enough for a pistol that has you wanting to keep shooting. This heftily constructed M9A3 magazine holds 22 rounds and takes 12g CO2 bulbs, with a beautiful matt tan finish to match your pistol and also the real deal!

If you're recreating the latest real-world German DMR rifle, the East Crane 20mm Picatinny Scope & Red Dot Mount for G-417 Replicas will put a smile on your face! Patterned after the mount setup provided with the real steel G28 DMR, this set includes a dual ring mount for either 25 or 30mm monotube scopes and a red dot sight mount with a built-in sunshade, designed for T1 footprint/mounting standard micro red dot sights. The set includes spacers to allow a 25mm monotube scope to be mounted, though by default the dual ring mount fits 30mm monotubes.

Both the scope and red dot mount are constructed from aluminium with steel bolts, nuts and screws, mounting to 20mm Picatinny rails. The dual scope ring includes a 20mm Picatinny rail on the top of each ring which is intended to allow the red dot sight mount to be fitted, though these are removable if you want to use the two mounts on separate platforms. On the right side of the mount, you'll find helpful engraved markings indicating the mounting direction, just like the real deal.

While it is designed to mimic the real G28 mount setup and is ideally paired with the East Crane EC-204 G-417 DMR, this mount setup will work on any platform with 20mm Picatinny rails and the included T1 mount has been sighted on MP5 and G36 platforms used by the German Armed Forces and Police. Whether you're replicating the real steel G28 or looking for a pair of unique mounts packaged together, the East Crane 20mm Picatinny Scope & Red Dot Mount for G-417 Replicas would be a slick setup for your primary!

A very popular boots for people who are in the security or police line of work. A budget pair of boots produced from full leather with a soft cow suede lining for added comfort for all day use around your feet and calf. 

A comfortable and adjustable load bearing Belt platform, designed for use in Airsoft and similar activities. 

This is a pack of twenty Glowsticks/Chemlights, that includes four of each colour, including Red, Orange, Yellow, Green and Blue.

If you want a pistol that can reach out and touch the enemy at long range, an extended inner barrel is just the thing. The WE PX001 Silencer And Extended Barrel Kit; 11mm CW is designed for the WE PX001 but is also compatible with most WE GBB pistols if you use your original HOP-up unit assembly.

The kit includes an 11mm CW threaded suppressor for 11mm CW female threaded barrels (WE, Armourer Works, CowCow and some others), a 6.03mm tightbore inner barrel measuring 189mm in length and HOP-up unit for the PX001 platform with a pre-installed bucking.

Please be aware, it is possible that the inner barrel will protrude through the tip of the suppressor when installed on certain compact pistols so make sure you measure up before ordering. We recommend adding the length of your existing inner barrel to the length of the included suppressor (138mm); if the length is equal to or greater than 189mm, the inner barrel will fit.

If you're running an MRO replica and you're getting jealous of T1 users with their snazzy mounts, this should sort that out! The PTS Syndicate Unity Tactical FAST MRO Mount is constructed from CNC Machined aluminium with steel mounting apparatus and boasts licenced Unity Tactical trademarks, just like the real thing! 

The FAST MRO mount is compatible with any red dot sight which uses the MRO mounting standard (most likely only real steel MRO, MRO HD and some MRO clones) and includes a built-in backup rear sight designed to align with standard AR front sights and flip up sights, with windage adjustment available via the dial on the right side. 

Like the FAST Micro Mount designed for T1 footprint red dots, this mount puts your MRO red dot at 2.26" above the bore, giving you a more comfortable neck position when shooting, especially if you use full face protection or active hearing protection. If you want to give your MRO red dot a fresh mount with a modern look and give yourself a more comfortable shooting experience, the PTS Syndicate Unity Tactical FAST MRO Mount will do just that!

If you're running an MRO replica and you're getting jealous of T1 users with their snazzy mounts, this should sort that out! The PTS Syndicate Unity Tactical FAST MRO Mount is constructed from CNC Machined aluminium with steel mounting apparatus and boasts licenced Unity Tactical trademarks, just like the real thing! 

The FAST MRO mount is compatible with any red dot sight which uses the MRO mounting standard (most likely only real steel MRO, MRO HD and some MRO clones) and includes a built-in backup rear sight designed to align with standard AR front sights and flip up sights, with windage adjustment available via the dial on the right side. 

Like the FAST Micro Mount designed for T1 footprint red dots, this mount puts your MRO red dot at 2.26" above the bore, giving you a more comfortable neck position when shooting, especially if you use full face protection or active hearing protection. If you want to give your MRO red dot a fresh mount with a modern look and give yourself a more comfortable shooting experience, the PTS Syndicate Unity Tactical FAST MRO Mount will do just that!

If you're rocking the WELL PRO WE06-GM PPK-20 GBB SMG, these are what you need to keep the recoil thumping! The WELL PRO 38rnd Green Gas Magazine for WE06-GM PPK-20 GBB is constructed with an alloy shell and polymer feed lips, replicating the shape of the real steel PPK-20/PP-19-01 magazine flawlessly.

The mag can be loaded through the feed lips at the top using a speed loader or by hand, though this is much easier if you pull the follower on the front down to relieve spring pressure. The gas fill valve is concealed beneath the stamped steel baseplate; simply lift the bottom section of the follower up and slide the baseplate off to the rear to access the valve. This magazine also features a "Bolt stop" mechanism, giving you the "dead man's click" when your mag runs dry, just like the real PPK-20!

They might look like a standard Airsoft M4 AEG magazine, but they've got a little secret, they launch themselves out of your gun when empty!  A spring powered latch projects the magazine out of your gun when the mag is empty to allow you to reload faster when the seconds really count.

A  Full polymer constructed High Cap Magazine for the G&G branded G36 series AEGs. Perfect for those who want to spends more time shooting rather than reloading.

One of the few problems with old-school cool like the SMG5K series of AEGs is that you are rather limited in rail mounting space, meaning your mission essential equipment that makes you a true operator has to be left behind. Ask the US Navy SEALs, they are known to use pipe clips and zip ties to attach rails to their MP5SD6s. You no longer have to resort to this pure bodgery, with the Extended top rail mount from CYMA you now have a Picatinny scope mount with forward M-LOK sections for tactical weapon lights, lasers, battery boxes, or anything else you need. This is all kept at the 12 o'clock position, keeping your ambi friendly SMG just that. 

If your Scorpion EVO stock has developed a bit of wobble or you fancy an ergonomic upgrade, the Airsoft Artisan 1913/20mm Picatinny Stock Adapter for ASG CZ EVO 3A1 will take your EVO to the cutting edge! This stock adapter is constructed from CNC-machined aluminium and allows 1913/20mm Picatinny compatible stocks to be mounted, just like MPX and MCX platforms. 

This gives you access to the latest and greatest stock options on the market, ranging from M4/AR-15 buffer tube adapters to lightweight skeletonised stocks and funky-looking visor stocks designed for use with full face protection and respirators. The 1913 interface allows you to swap your stock in seconds whenever you feel like it, giving your EVO extra flexibility to meet the requirements of the mission at hand. If you fancy an aesthetic change for your EVO with loads of functional benefits, the Airsoft Artisan 1913/20mm Picatinny Stock Adapter for ASG CZ EVO 3A1 is ideal for your build!

If you want glowing BBs without making your primary any longer or fitting some bulky, slightly ugly, tracer unit, the CYMA Tracer HOP-Up Chamber for AK AEGs is a great choice! This alloy rotary HOP-up chamber integrates a tracer module, just like more expensive alternatives with the option to use red or green tracer BBs. The set includes everything you need to complete the HOP-up chamber build, including the bucking and nub.

This unit is powered by your AEG's battery through the balance cable, meaning it will only work with LiPo batteries unless you have something home-brewed in mind. The set includes 3 sets of wiring for use with 7.4V LiPo, 11.1V LiPo or custom battery solutions, all of which connect to the pre-wired connector on the HOP-up unit itself.

While it is designed for use with the CM series of AKs, this unit should work with most AKs on the market, however, potential modifications will be required to fit certain brands. Depending on your specific platform, fitting may also require modification to your receiver. As such, we only recommend this unit for those who are comfortable working on AEG internals. If this sounds like you, why not shave off length and weight from your classic Russian primary with the CYMA Tracer HOP-Up Chamber for AK AEGs!

If you are looking for tracer BBs in the go-to skirmishing weight, 0.25g, NUPROL have what you need! The RZR 0.25g Green Tracer BIO BB has the same ultra-tight +/- 0.01mm tolerances as NUPROL's standard BBs but are green tracer BBs which will glow when fired through an Airsoft tracer unit, helping you instinct aim in close quarters and guide your BBs onto target in low light settings.

A 530 round high capacity, wheel-wound magazine, designed for use with G&G's UMG SMG electric replica. Constructed from durable, high strength and lightweight polymers.

If you need mags for your Novritsch SSQ22 GBBR you have found them! These magazines are styled after real steel 10/22 25-round magazines and are constructed from high density polymer with alloy internals and a steel feed spring. The outer shell of the magazine boasts textured panels to make the mag easier to grip during a speedy reload, and each magazine holds 36 BBs.

Loading the magazine can be done in one of two ways; Either pull the follower on the front of the magazine down to the bottom and load with a speed loader through the loading port on the front, or use a GBB adapter with your speed loader and load through the feed lips at the top of the mag. The gas fill valve is located on the bottom of the mag, and as with all gas magazines, the mag needs to be inverted in order to fill it. These mags work well with the Novritsch SSQ22 but unfortunately are not compatible with the ASG/KJ Works KC-02. If you are planning on running Novritsch's sporty new 10/22 style carbine, a few of these is a must!

A mock Airsoft suppressor designed specifically for the MP9 GBB submachine gun, featuring genuine Brugger & Thomet AG licensed trademarks.

An Airsoft 6mm BB gas blowback magazine for the 4.3 Hi-Capa pistol series. The magazine is constructed from Alloy, with Polymer feed lips, base plate and follower.

If you need a spare mag for your Double Bell Lee Enfield, here you go! The Double Bell 6 Shell Magazine for SMLE No.1 MK.III Lee Enfield Rifles holds 6 Double Bell Lee Enfield/KAR98K shells (not included) and is compatible specifically with the Double Bell Lee Enfield No.1 MK.III S.M.L.E Bolt Action Sniper Rifle; Shell Ejecting. 

The magazine is constructed from alloy with a gun metal finish which closely matches the real thing. While it may not be the most practical skirmish primary, the fun factor of the shell-ejecting Lee Enfield is off the charts. If you want to keep your Double Bell Rifle No.1 MK.III SMLE well fed, this magazine is what you need!

If you're looking to make the most of your SSP19's full-auto fire mode, one of these will do it! The Novritsch 23rnd TP22 / EU Green Gas Magazine is constructed from alloy. This green gas magazine can be filled through the fill valve on the rear of the magazine. This magazine is designed for

BBs are loaded either through the feed lips at the top or by holding the follower on the front down and filling through the widened section of the follower channel at the front. This is a great multipurpose magazine if you have a variety of pistols that you take to the battlefield.

The Angry Gun QDC 3-Prong Flash Hider matches the design of real steel flash hiders such as the ones found on AUGs. It is constructed from steel making it extremely durable and sure to withstand any skirmish. This muzzle device is designed to work with other Angry Gun QDC attachments such as their suppressor and tracer unit. These products interlock seamlessly guaranteeing a reliable attachment every time.

This flash hider mounts to 14mm CCW threading, commonly found on most Airsoft assault rifles. It also has a grub screw so you can ensure it is securely attached to your replica with no worries about it coming off. The flash hider also comes with a stainless steel shim, to make sure that it is situated perfectly on your rifle's outer barrel.

If you want a super realistic flash hider that is compatible with Angry Gun QDC suppressors and tracers, this is the one for you! Its steel construction and real steel design certify that this flash hider is perfect for any skirmisher seeking a realistic loadout.

A replacement or spare Magazine for a RAVEN branded Hi-Capa 4.3 or 5.1. It holds a total of 25rnds and is powered by a 12g CO2 Bulb, which means it works far better in the cold than a Green Gas Magazine. This Magazine will provide much stronger recoil and better shots-per-magazine, especially when Winter is upon us.

If you own an Eshooter FLARE M Tracer Unit, M BT or Mono but want to keep your platform's front end looking realistic, this is the suppressor for you! The Eshooter Sound Suppressor/Tracer Housing for Flare M is an alloy suppressor-styled muzzle device. It mounts straight onto a common 14mm CCW and includes an 11mm CW to 14mm CCW thread adapter, so if you have something like a WE and Armourer Works pistols OEM pistol you don't have to source one separately!

To fit your tracer unit in this suppressor, simply untwist either side of the muzzle device, drop your FLARE M in and resecure the part you untwisted. This suppressor will not only keep your tracer unit safe from accidental bumps and scrapes on the battlefield, but it will also conceal the unrealistic style of the tracer unit.

Both styles feature unique, modern styling, and a grippy section of textured alloy so you can have a good grip on the suppressor when securing it to the front of your barrel. If you're looking for a way to keep your tracer unit lowkey on the battlefield, or you want a modern low-profile suppressor device, the Eshooter Sound Suppressor/Tracer Housing for Flare M is perfect for you!

If you own an Eshooter FLARE M Tracer Unit, M BT or Mono but want to keep your platform's front end looking realistic, this is the suppressor for you! The Eshooter Sound Suppressor/Tracer Housing for Flare M is an alloy suppressor-styled muzzle device. It mounts straight onto a common 14mm CCW and includes an 11mm CW to 14mm CCW thread adapter, so if you have something like a WE and Armourer Works pistols OEM pistol you don't have to source one separately!

To fit your tracer unit in this suppressor, simply untwist either side of the muzzle device, drop your FLARE M in and resecure the part you untwisted. This suppressor will not only keep your tracer unit safe from accidental bumps and scrapes on the battlefield, but it will also conceal the unrealistic style of the tracer unit.

Both styles feature unique, modern styling, and a grippy section of textured alloy so you can have a good grip on the suppressor when securing it to the front of your barrel. If you're looking for a way to keep your tracer unit lowkey on the battlefield, or you want a modern low-profile suppressor device, the Eshooter Sound Suppressor/Tracer Housing for Flare M is perfect for you!

A Generation 3 Micro Computer Controller Chip Set designed to add a huge variety of functionality to Airsoft AEG. The chip is built to be as compact as possible, requiring the smallest amount space and is specially coated to the Military Specification (Mil-Spec) MIL-V-173C. 

If you're looking for a way to make your giant G3 AEG more compact, the Jing Gong Sliding Stock for G3 AEGs will do the trick! Designed to fit Jing Gong and Tokyo Marui G3 AEGs, this stock offers 2 positions of adjustment. The stock can be deployed by pushing the adjustment lever on the bottom towards the left, after which it can be pulled out and into place.

The stock base and butt plate are constructed from high density polymer and the stock bars are alloy, keeping weight to a minimum and providing strength where needed. The butt plate boasts deep serrations for optimal grip in any weather conditions and the stock base includes a sling loop for conventional strap slings. Whether you're working on a G3A4 build or you want to fit your G3 into a smaller gun bag, the Jing Gong Sliding Stock for G3 AEGs is ideal!