Viewing 60 of 368.
£10.99
  • High density polymer construction
  • 20mm Picatinny rails at 3, 6, 9 and 12 o'clock
  • For AK-47/74 AEG and GBBR assault rifles

If you are an AK fan but are getting green-eyed over the M4/AR-15's accessory options, a railed handguard will cure that! The CYMA 20mm Picatinny Railed Handguard for AK AEG is constructed from solid high density polymer and provides 20mm Picatinny rails at the 3, 6, 9 and 12 o'clock positions, ready for 20mm Picatinny accessories.

The side rails are short lengths, ideally designed to mount a tactical flashlight or aiming laser but can also be removed if you prefer slick sides on your handguard. The top rail features 12cm of rail space, allowing for a forward mounted red dot sight to be fitted for that slick PMC look. The bottom rail is 11cm long, providing enough room at the front so you can add a vertical or angled foregrip, or even a bipod if you see fit. The sides of the lower handguard also include ribs for extra grip, similarly to the standard issue AK-10x polymer handguards. If you want to mount your mission essential kit to your AK AEG or GBBR this handguard is one of the cheapest ways to do it!

From £89.99
  • ABS Polymer construction
  • MOSFET Pre-installed - Snappy Blowback
  • Far better than you expect!

If you like to be at the cutting edge of Airsoft development, you're going to need this! The CYMA CM.136 Grach EBB; MOSFET Edition is an extremely innovative new form of Airsoft Electric Pistol which boasts an electric blowback system. Those old hats out there will have their preconceptions around EBB pistols, but make no mistake, this is nothing like the AAA battery-powered EBB pistols of old!

Thanks to its low resistance wiring, pre-installed MOSFET, ball bearing bushings and innovative battery in magazine design, the blowback is incredibly fast, allowing for rapid double taps and near-GBB-like speed. Trust us, when you shoot this thing you will be grinning from ear to ear!

From £129.99
Was £149.99
Save £20.00
  • High density polymer
  • CNC Steel Gears
  • High Rate of Fire

An electric-powered Airsoft Gun that offers a crazy high rate of fire - far better than most out of the box Guns. It achieves this with a high speed motor and a 13:1 ratio gearset. If you're looking for an incredible project gun or you're sick of being on the back foot at Airsoft skirmishes, then the High Speed Series CM.011 will seriously up your game.

From £199.99
  • Full metal construction
  • Integral Suppressor
  • Ambidextrous fire controls

Looking for a sneaky SMG? The CYMA CM.041 SD6 is a full metal version of the sneaky SMG-5 we all know and love which has been upgraded with CYMA's BLUE Edition internals, making it as rock solid on the inside as it is externally. All of the internal upgrades are focused on reduced friction and lower stress, meaning the BLUE Edition CM.041 SD6 should provide a lifetime of superb performance and is fully compatible with aftermarket upgrades for those who want a bit more. As it comes, the rate of fire and trigger response is spectacular for an AEG without a MOSFET and is a significant step up from other SMG-5 SD6 AEGs on the market.

The real-world version of this submachine gun has been used by US Navy SEALs and UKSF in various special applications and has an iconic look which simply cannot be imitated, as much as the M4 platform tries to (Honey badger *cough*). If you want an SMG which is milsim appropriate with a plethora of internal enhancements built right in, the CM.041 SD6 would be a great tool for the task.

£4.99
  • Zenit Style
  • Textured Surface
  • Alloy Constructed

An Aluminium constructed charging handle extension for AK style replicas.

£7.99
  • 2 Point Sling
  • Easy to Adjust
  • Suited for Airsoft AK Rifle

A durable 2 point tactical sling, designed for use with Airsoft AK series weapons, from the AK47 to the various designs based on it.

From £43.99
  • Pump action
  • Shell loaded
  • Tri shot

Short and compact like it's real world counterpart, but still packs a punch. 

This Airsoft stockless variation of the iconic M870 if for those of you for an operator's choice to clear rooms in CQB skirmishes and with it's satisfying pump action and tri-shot spread, enemy insurgents won't last long with this shotgun making quick work of them!

£5.99
  • M24/CM.702 Magazine
  • 28rnd Capacity
  • Compact design

You shouldn't need to reload often when sniping, unless you are a bad shot! Regardless of this, it's always wise to have a spare mag on hand for extended skirmishes rather than panic under fire trying to load BBs as the enemies BBs shower down upon you! Introducing CYMA's spare magazine for the CM.702 M24 rifle. This magazine is constructed from polymer and holds 28 rounds. The magazine can be loaded either by hand or with a speed loader. 

£64.99
  • 30rnd Capacity
  • Green gas magazine
  • Fits CYMA CGS & TM ZET M4/AR-15 GBBR

If you're getting gassed up for the GBBR season and you're running a CGS or TM ZET system GBBR, fill your rig with these! The CYMA 30rnd Green Gas Magazine for M4/AR-15 CGS & ZET GBBR is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and is a green gas magazine with the fill valve on the rear of the steel STANAG style body.

The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs. 

From £159.99
  • Front Bayonet Lug
  • Great For Beginners
  • Large Battery Storage

Airsoft 6mm BB Gun built by CYMA in China to replicate the American M14 Rifle. The weapon features full Alloy Internals, Receiver and Barrel, with a Polymer Stock and Heat Shield.

From £169.99
  • Front Bayonet Lug
  • Great For Beginners
  • Large Battery Storage

Airsoft 6mm BB Gun built by CYMA in China to replicate the American M14 Rifle. The weapon features full Alloy Internals, Receiver and Barrel, with a Polymer Stock and Heat Shield.

£13.99
  • SMG-5 Style grip
  • Compatible with M-LOK
  • Perfect for a PDW with M-LOK rails

If you are rocking a super shorty M-LOK railed AEG you may find that you cannot fit a foregrip and hand stop on your rifle. Having been in that situation I can tell you, it is annoying. Finally, a solution! The Cyma M-LOK foregrip with integral hand stop not only gives you the functionality of a double-duty M-LOK accessory but also makes your AEG look a bit like an SMG-5K! What's not to love? Modern functionality with classic design aesthetics, the best of both worlds!

From £79.99
  • Electric pistol
  • Semi / Fully automatic 
  • 20mm RIS / RAS rail

Wanting to get into Airsoft skirmishing in style? Or maybe you're looking for an iconic sidearm to complete your loadout.

The CM.121 has got all bases covered, with it's lightweight polymer construction and choice of semi or full auto, this electric Desert Eagle lets you rock up to a skirmish with a replica of the classic hand cannon.

£10.99
  • 120rnd Capacity
  • Steel shell with polymer internals
  • Compatible with SMG-5/SD/K AEG series

If you have dreams of building an old school SMG-5 but you can't find the right mags, get them here while they last! The CYMA 120rnd Old School Straight Mid-cap Magazine for SMG-5 AEG Series matches the real steel early style of SMG-5 magazine perfectly, including its straight body design, reinforcement ribs and steel shell construction.

These mags are mid-caps, meaning no battle rattle as you go room to room with your SMG-5 doing what it does best, and should be compatible with practically any SMG-5 AEG platform out there. The mags can be loaded through the fill/feed port at the top of the magazine body using a standard Airsoft speedloader or loading rod and hold 120BBs, a respectable capacity for such a compact magazine design. If you have your old school handguard and your Maglite ready, finish your build off with these old school straight mags!

£12.99
  • Lightweight polymer build
  • Windowed mock cartridges
  • 550rnd Capacity

Those of you looking for an AK mag with a more modern aesthetic and some unique stylings, this variant from CYMA is one to consider. The mag features a 'witness window' in which transparent areas either side of the mag reveal mock cartridges, making the mag look that bit more realistic.

The magazine is that of a high-cap design, meaning that is wheel-wound at the bottom to reload and holds a whopping 500 rounds, which is great for those of you that love to full-auto liberally. The mag is filled at the top via the fill window and should fit that vast majority of brand and variants of AKs.

£11.99
  • For M14/M1A
  • 20mm RIS Rail
  • Secure Mounting

An Alloy constructed mount for the M14/M1A platform, which secures above the ejection port via the threads on the side of the receiver and allows you to mount 20mm compatible accessories/sights.

From £89.99 Pack price
Normally £94.96
Save £4.97
  • CYMA M052 Pistol grenade launcher
  • 2 x NUPROL 40mm MOSCART Gas Grenades
  • Big firepower in a small package!

If you need a big firepower increase but have limited space, the CYMA Pocket Rocket Stand-Alone Launcher Bundle was put together with you in mind! This pack combines the M052 40mm Pistol Grenade Launcher with 2 x NUPROL 40mm MOSCART Gas Grenades, giving you a compact launcher which can be easily carried and 2 chances to shower the enemy with BBs! If you want a run a launcher next skirmish but don't want to carry around another cumbersome platform or mount a massive n00b tube onto your primary, the M052 is the solution you were looking for.

From £179.99
  • Spring bolt action
  • Fluted outer barrel
  • Adjustable stock length

As seen in the immensely popular Battlefield game series, among many more, this is often the go-to rifle for aspiring snipers, with this new upgraded version shooting at a beastly 500FPS, straight out of the box.

Based on the M24 platform, this is spring powered bolt action replica with a full metal build with a lengthy adjustable buttstock. This is a great, budget-friendly Airsoft sniper for those of you looking to start your sniper loadout or if find yourself playing more outdoor skirmishes.

£18.99
  • Railed top receiver cover
  • Steel and alloy construction
  • For CM.045 AKS-74U AEG series

Looking for a way to mount a red dot or telescopic sight to your AKS-74U? The 20mm Railed Top Cover from CYMA is designed for the CM.045 series of AKS-74U AEG rifles and provides a 20mm Picatinny rail which runs the length of the steel top cover, allowing any sighting system which mounts to 20mm rails to be fitted. This top cover will not fit standard AK rifles and is designed for the CM.045 AKS-74U series.

£39.99
  • High torque motor
  • Neodymium magnets 
  • For M4/AR-15, P90, SMG-5 & G3 AEGs

If you're looking for an affordable way to spice up your build, the CYMA High Torque Neodymium Magnet Motor; Long Shaft is a great shout. This motor is the standard motor provided in CYMA's top-of-the-line Platinum E-Edition AEGs, a high torque motor powered by Neodymium magnets. Being a high-torque motor, this motor is ideal for DMR builds requiring stronger springs and CQB builds seeking improved trigger response but is easily fast enough to give most AEGs a significant ROF boost!

This version is the Long Shaft model, designed for M4/AR-15, P90, SMG-5 (not the -K model) and G3 AEGs and includes a pre-installed D-type pinion gear constructed from steel. The pinon spring is also included and the motor is pre-wired for spade connectors, meaning there is no need to break out the soldering iron to install it. If you're looking for a snappier trigger, building a DMR or seeking an increase in rate of fire, the CYMA High Torque Neodymium Magnet Motor; Long Shaft is a great affordable option!

£44.99
  • M-LOK mounting surfaces 
  • Weighs less than a bag of crisps
  • Choose between SMG-5 or SMG-5K variants


Bring your SMG-5 variant into the 21st century and make all the ARP-9 users jealous! The CYMA M-LOK handguard is extremely light, as heavy or less so than a standard polymer handguard. Even with no accessories mounted, this sleek handguard is comfortable to grip and looks very modern, meaning your SMG-5 variant could disappear in a pile of AR15s and even they wouldn't notice the intruder! Looks even more operator when combined with the CYMA Picatinny and M-LOK top rail for SMG-5 or SMG-5K!

£29.99
  • 1500 Round Capacity
  • Makes your P90 a big mo'fo
  • Requires an AR15 style High cap to function

Finding your P90 is running out of ammo before you're done shooting? Maybe you think your P90 just isn't quite ugly enough? Just bought a P90, have no mags but a pile of old M4 highcaps? This magazine solution from CYMA will make you all happy. Huge Capacity to help you dominate the field, borrow your boring AR user mates magazines and hose the enemy down with a support weapon that fits in your pocket, the CYMA Mag adaptor Box mag is doing double duty!

From £89.99
  • High Rate of Fire
  • Upgraded Gearbox
  • MOSFET Pre-installed

An Airsoft Electric Pistol which has an upgraded Gearbox with a pre-installed MOSFET, meaning you get a high rate of fire in a pistol which works perfectly in any weather conditions!

From £94.99
  • High Rate of Fire
  • Upgraded Gearbox
  • MOSFET Pre-installed

An Airsoft Electric Pistol which has an upgraded Gearbox with a pre-installed MOSFET, meaning you get a high rate of fire in a pistol which works perfectly in any weather conditions!

From £99.99
  • Unique compensator
  • Finger ridged receiver
  • 21'' Monolithic top rail

Custom external components come together to create one unique looking M4. Constructed from tough, but lightweight polymer, the M4 is a solid platform, supported by many systems and featuring a highly customisable top rail, which in total is 21'' in length, there are a huge array of options to customise this AEG.

With this rifle being on the longer side, it's a perfect entry level custom M4 for skirmishing outdoors and taking out longer range targets.

£4.99
  • Original replacement part set
  • For CYMA AK AEGs, may fit other TM clones
  • Includes charging handle rod, spring & top cover latch

If you have lost your AK AEG charging handle spring, rod or top cover retention latch you are in luck! The CYMA Charging Handle Rod & Spring Set for AK47/74 AEG is an original replacement part set for CYMA AKs but should also fit other Tokyo Marui clone AK series AEGs as well. The set includes the charging handle spring, guide rod and top cover retention latch.

£8.99
  • 150rnd Capacity
  • Mid-cap magazine - No rattle
  • For AK47/74 AEGs - Ideal for tactical AKs!

If you're working on a modern tactical AK build, this is the ideal magazine to complete it! The CYMA 150rnd Bulgarian 5.56 Style Mid-Cap for AK47/74 AEG is constructed from brown tinted translucent polymer with a ribbed external design, showcasing mock cartridges inside for visual realism. 

Being an Airsoft mid-cap magazine, this mag holds 150 BBs loaded through the fill/feed port on the top of the magazine body using a speed loader or loading tool. Thanks to its spring-loaded internals, this magazine won't rattle as you run, making it perfect for stealthy playstyles. Whether you're building a 5.56 style AK or you run a modernised AK bristling with modern accessories and upgrades, complete your build with the CYMA 150rnd Bulgarian 5.56 Style Mid-Cap for AK47/74 AEG!

From £89.99
  • 6.03mm Tightbore inner barrel
  • Alloy version 2 gearbox 
  • S-System/SIR 20mm railed handguard

If you're looking for an affordable beginner Airsoft gun with a unique look, the CYMA CM.508 M4A1 S-System AEG should be right up your street! This M4 AEG is battery-powered and constructed predominantly from ABS polymer with an alloy version 2 gearbox based on the Tokyo Marui design. This keeps the build light and easy to move with, ideal for younger skirmishers or those looking for something lighter than a full metal primary for late in the skirmish day. 

The alloy version 2 gearbox the CM.508 is based around is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

On the outside, the CM.508 is ready for 20mm Picatinny accessories such as red dot sights, scopes, tactical flashlights, lasers and vertical grips, ready to be customised for the mission at hand. The barrel is threaded to 14mm CCW male, meaning suppressors and tracer units can be added for sneaky styling and an instinct-aiming advantage. If you want to try your hand at Airsoft skirmishing or target shooting without breaking the bank, the CM.508 M4A1 S-System AEG from CYMA is the most affordable way to do it!

£34.99
  • Tracer HOP-up unit
  • Works with red & green tracer BBs
  • Compatible with most M4/AR-15 AEGs

If you want glowing BBs without making your primary any longer, the CYMA Tracer HOP-Up Chamber for M4/AR-15 AEGs is a great shout! This alloy rotary HOP-up chamber integrates a tracer module, just like more expensive alternatives with the option to use red or green tracer BBs. The set includes everything you need to complete the HOP-up chamber build, including the bucking and nub. 

This unit is powered by your AEG's battery through the balance cable, meaning it will only work with LiPo batteries unless you have something home-brewed in mind. The set includes 3 sets of wiring for use with 7.4V LiPo, 11.1V LiPo or custom battery solutions, all of which connect to the pre-wired connector on the HOP-up unit itself. 

While it is designed for use with the CM.097 series and other CYMA Platinum M4/AR-15 AEGs, this unit should work with most M4/AR-15 AEGs on the market, potentially requiring modifications to fit certain brands. Depending on your specific platform, fitting may also require modification to your receiver. As such, we only recommend this unit for those who are comfortable working on AEG internals. If this sounds like you, why not shave off length and weight from your CQB primary with the CYMA Tracer HOP-Up Chamber for M4/AR-15 AEGs?

From £219.99
  • Rear Wired
  • Dovetail Side Rail
  • Integrated Suppressor

The CYMA CM.099 is a faithful replica of the infamous VSS Vintorez Sniper Rifle, a specialist Russian DMR from the AS VAL family that fires the specially-made 9x39mm. This Airsoft Electric Gun replica ticks all the right boxes for a VSS replica, including a rear-wired Stock which makes battery installation much easier than other VSS models.

About CYMA

CYMA is renowned for making great starter Airsoft weapons suited for any budget. Originating from China, CYMA makes a wide range of Airsoft AEGs, ranging from M4 replicas, Bolt action sniper rifles and AK47 platform RIFs to various Airsoft SMGs and pump action shotguns. CYMA even makes AEPs (automatic electric pistols), offering replicas of all the iconic designs including Desert Eagle replicas!

In recent years CYMA have elevated its products and brand and is now regarded as a top-quality brand that rivals other premium brands, as demonstrated with their much-lauded Platinum Edition, High-Speed Edition and Blue Edition ranges. CYMA is also behind some of EMG's licensed RIFs, providing the high quality bodies and internals for EMG's replicas.

CYMA also offers a wide array of Airsoft accessories and spare parts such as magazines, RIS/RAS rail systems, complete gearbox upgrade kits and both internal and external parts. CYMA offer something for every Airsofter, at any budget with great value for money.