Airsoft Gears & Gear Sets

Building a speed demon of an AEG? You will need high speed gears to get the most out of it! The CNC steel High Speed Gearset from CYMA has a 13:1 ratio, which means every 13 motor turns the gearbox will cycle once, which is a step faster than standard 18:1 Airsoft gears. These gears pair perfectly with a high speed motor to provide a demonic rate of fire, as can be seen in the latest upgraded versions of CYMA's Platinum series AEGs. This gearset is designed for use with M120 springs and below only, so should be fine for most UK legal Airsoft AEGs but is not suitable for a DMR rifle with high FPS. This gearset is a version 2/3 set so should work in any AEG with a V2/3 gearbox and many others which share the same gears.

For those working on a build which pushes the limits, you will require some decent gears! Introducing the VFC Avalon 18:1 Steel gearset, a standard ratio gearset constructed from hardened steel. The set includes a spur gear, sector gear, and bevel gear which are all precisely machined for perfect meshing and smooth, reliable performance.

These gears are tuned to an 18:1 ratio, which means for every 18 revolutions of your motor the gearbox will complete one full cycle. The benefit of using standard ratio gears is that you can make either a DMR or a high-rate-of-fire CQB beast without wholly committing to one or another, meaning you can adapt your build to the scenario which suits, and without overstressing the gearbox by running it considerably beyond its design parameters.

Treat your AEG to some premium gears and have it shooting consistently for a long long time, plus you have the flexibility of running a DMR one day, then alternating to a rapid-fire monster the next day!

If you have had a mishap with your bevel gear, this KRYTAC replacement part should sort it! The KRYTAC Bevel Gear Assembly for V2/3 AEG Gearbox is constructed from hardened steel and is compatible with any AEG which uses a V2 or V3 gearbox. The hardened steel construction makes this bevel gear perfect to pair with an upgraded motor to guarantee long-term performance.

If you are looking to further extend your advantage and push your AEG to the limits reinforced gears are a must for long term reliability under increased stress. This Laylax EG Hard Gear Set is specifically designed for Airsoft AEGs with a version 2 or version 3 gearbox, or compatibility with v2/3 gearsets and includes a hardened steel spur gear, sector gear and bevel gear. This gearset is a high speed set with a ratio of 16:1, intended to provide a slight speed increase with the same motor compared to the standard 18:1 gears in most AEGs.

If you've stripped a gear in your CYMA or Real Sword SVD, you're in luck! The CYMA Steel Gear Set for CYMA/Real Sword SVD/SVU is a replacement original parts set for the CYMA CM.057 SVD/SVU AEG series and should also be compatible with the Real Sword Dragunov SVD.

The gears are constructed from steel and come as a set of 4, replacing all gears inside the unique SVD gearbox. These gears are not compatible with the A&K Dragunov SVD, only the CYMA CM.057 series and the Real Sword Dragunov.

A series of Steel manufactured Motor Pinion Gears for either the TOP M60/M249 or Tokyo Marui AEG motors.

Increasing the rate of fire on your airsoft rifle sometimes causes it to misfeed, resulting in dry firing. A sector gear delay will solve your feeding problems 99.9% of the time with a simple add-on.

This sector gear clip increases the time it takes for the air nozzle to cycle. Delaying the cycle improves BB feeding by allowing the air nozzle to be retracted from the hop-feed for a longer duration.

This tiny add-on could instantly transform your AEG if it has been suffering from firing issues.

Although this is designed to be a perfect fit, it is recommended that this be permanently fixed in place using superglue, after testing to prevent it from potentially loosening over time.

If your AEG shoots hard you may want some hard internal parts to secure its performance in the long term! The Laylax Hard Anti-Reversal Latch for V2/V3 Gearbox is constructed from hardened steel to cope with even the most ferocious build. The set includes the anti-reversal latch itself and the ARL spring and is compatible with all Airsoft AEGs which use the Version 2 or Version 3 gearbox type.

If you're the techy type and are seeking a smooth, buttery-sounding gearbox with maximum efficiency, helical gears must be on your shopping list! The Lonex Spiral Bevel Gear & Helical Pinion Gear for V2/3 Gearbox includes a pinion gear and bevel gear, both constructed from steel for maximum strength. The included pinion gear is an "O type", designed for O-type motor shafts and not compatible with D-type shafts. 

These gears differ from standard bevel and pinion gears in the angle of the teeth, cut in a helix shape and designed to increase torque and efficiency. This also means the gearbox report will be far quieter with these installed, though strong bushings are recommended for the bevel gear due to the increase in axial thrust force generated. Naturally, this set is ideally used by a techy skirmisher with the prerequisite knowledge needed to bring out the best performance and longevity from their setup. 

Increasing the rate of fire on your airsoft rifle sometimes causes it to misfeed, resulting in dry firing in builds with a very high rate of fire. A sector gear delay will solve your feeding problems 99.9% of the time with a simple add-on.

This sector gear clip increases the time it takes for the air nozzle to cycle. Delaying the cycle improves BB feeding by allowing the air nozzle to be retracted from the hop-feed for a longer duration.

This tiny add-on could instantly transform your AEG if it has been suffering from high rate of fire issues.

Although this is designed to be a perfect fit, it is recommended that this be permanently fixed in place using superglue, after testing to prevent it from potentially loosening over time.

If you're thinking of making a gearbox from scratch or you've had a disaster with your current anti-reversal latch or ARL spring, the VFC Anti Reversal Latch For V2 Gearbox will sort you out! This set includes a steel ARL and spring steel ARL spring, making this ideal for upgraded AEGs with strengthened gearsets.

The anti-reversal latch in your airsoft electric gun is responsible for preventing reverse motion of the gears, which could cause damage to your piston and gears if it happens during a cycle of the gearbox.

This Anti-reversal latch set is intended for version 2 gearboxes and is a great spare or repair to have in your toolbox for those who like a bit of DIY when their AEGs stop cooperating. If you've lost that awkward little ARL spring, this set offers an easy route to replacing it for relatively cheap too!

If your pinion gear looks worn out, this should fix it! The Battleaxe Steel Motor Pinion Gear; D Type is a replacement pinion gear made from steel and designed for D-type motor shafts. The pinion gear is the gear mounted to the motor shaft and is easy to damage if you regularly adjust motor height or tune internals. Given the price of this super-cheap replacement pinion, we recommend the techy types keep a few handy just in case!

If you've stripped a gear or are working on a custom-built gearbox, the Delta Armory 18:1 Steel Gear Set is a great affordable option to get your build online! Constructed from steel, these 18:1 standard ratio gears are compatible with both version 2 and version 3 Airsoft gearboxes, offering 1 gear cycle per 18 motor cycles (18:1). 

The set includes the Spur gear, Bevel gear and Sector gear. If you need a cheap way to fix up your AEG or like to keep spares on hand just in case, the Delta Armory 18:1 Steel Gear Set belongs in your bits box!

If your selector switch is damaged or you lost a bit during maintenance this set can be a lifesaver! The ARCTURUS Ambi Fire Selector Gear Set for M4/M16 Replicas is a replacement original part set for ARCTURUS AEGs that feature a double sided, ambidextrous fire selector. This set includes the internal selector gears and axis for your AEGs ambidextrous selector switches.

If you are looking to further extend your advantage and push your TM NGRS system to the limits reinforced gears are a must for long term reliability under increased stress. The Laylax EG Hard Gear Set is specifically designed for the Tokyo Marui Next Generation Recoil Shock (NGRS) gearbox and includes a hardened steel spur gear, sector gear and bevel gear. This gearset is a standard ratio set (18:1), intended to provide a great compromise between high speed and high torque, allowing you to take your build in either direction and still benefit from reinforced gears!

If you're thinking of building a speedy Airsoft platform you will need some high-speed gears to maximise the fire rate! The ARCTURUS CNC Steel High-Speed Gear Set for Version 2/3 Gearbox has a 13:1 ratio, which means every 13 motor turns the gearbox will cycle once, which is a step faster than standard 18:1 Airsoft gears. When paired with a high-speed motor these gears will turn your AEG into a speedy demon. This gearset is a version 2/3 set so should work in any AEG with a V2/3 gearbox and many others which share the same gears.

These gears have been CNC machined from steel, ensuring that they are of the highest quality. If you want only the best for your AEG, you need the ARCTURUS CNC Steel 13:1 High-Speed Gear Set for Version 2/3 Gearbox!

This Motor Pinion Gear is an O-Type design, constructed from Steel and made for Airsoft Electric Guns to replace broken, damaged or worn parts. If Pinion Gear has lost teeth or worn down, it's only a matter of time before it stops working completely; stock up on vital spare parts like the Battleaxe Steel Motor Pinion Gear, today.

A replacement Pinion Gear designed to replace broken, damaged and worn Pinion Gear on Airsoft AEG Motors with Type-D Shaft.

If you're building a gearbox from scratch or you've had a mishap with your anti-reversal latch or ARL spring, the Lonex Anti-Reversal Latch for V2/V3 Gearbox will sort you out! This set includes a steel ARL and spring steel ARL spring, ideal for upgraded AEGs with strengthened gearsets.

This Anti-reversal latch set is intended for version 2 and version 3 AEG gearboxes and is a great spare to have in the toolbox for techy Airsofters. If you've lost that awkward little ARL spring, this set offers an easy route to replacing it!

If you are looking for exceptional performance for your AEG, either for a high rate of fire build or a DMR running at higher than normal FPS reinforced gears are a must for long term reliability under increased stress. The Laylax EG Hard Gear Set is compatible with any AEG with a version 2 or version 3 gearbox and includes a hardened steel spur gear, sector gear and bevel gear. This gearset is a standard ratio set (18:1), intended to provide a great compromise between high speed and high torque, allowing you to take your build in either direction and still benefit from reinforced gears!

If you feel the need for speed, the EG Hard Gear Set 13:1 Ratio for Version 2/3 Gearbox from Laylax will give you just that! The renowned Laylax/Prometheus EG Hard Gear series boasts over a decade of service, crafted with precision through Japanese machining, heat treatment, and forging techniques that adhere to the highest standards. This meticulous manufacturing ensures a notably quieter gear mesh sound, even under higher FPS and fire rate conditions.

These are 13:1 high-speed gears, improving rate of fire and trigger response by cycling the gearbox once every 13 motor revolutions as opposed to the standard once per 18 revolutions. This means you can boost rate of fire without upgrading your motor, though like any other replacement gearsets, these will require expertise to install. If you already upgraded your motor, wiring and added a MOSFET and you still want more speed, this gearset will do the trick.