Airsoft Outer Barrel and Parts

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

A one inch barrel extension for 14mm CCW threaded barrels, providing that little extra length should you wish to add a suppressor or tracer to your favourite RIF but can't because of a rail system being in the way.

A two inch barrel extension for 14mm CCW threaded barrels, providing that little extra length should you wish to add a suppressor or tracer to your favourite RIF but can't because of a rail system being in the way.

This Slong Airsoft Outer Barrel Extension; 87mm will sit on the end of your current 14mm outer barrel and provide 87mm of extra barrel length but keep the same male 14mm CCW threading which can make all the difference when trying to get the perfect muzzle device to sit just right on the end of your weapon. Alternatively, it is perfect for making your outer barrel ridiculously long, if you are trying to achieve one seriously mean-looking DMR.

This barrel extension is extremely useful for mounting tracer units and large suppressors where you previously couldn't.

If you are working on your CQB build you must be looking for the shortest barrel out there, and right now, this is it! The 5KU 7" Aluminium Outer Barrel For M4/AR-15 AEG is compatible with most M4/AR-15 AEGs and is constructed from aluminium for a perfect balance between low weight and high strength. 

The barrel is threaded at the tip with common 14mm CCW male threading, meaning you can mount the most common muzzle devices on the market with ease, including tracer units, suppressors and flash hiders in various styles. Also present are grooves in the underside to allow a gas block or M4/AR-15 triangular front iron sights to be mounted, though this is not essential. If you need your M4 to be shorter this will get you halfway there, but don't forget you'll need a shorter inner barrel too! 

If you're looking for a new outer barrel to change up the length of your M4/AR-15 AEG, the 5KU 10.3" Aluminium Outer Barrel for M4/AR-15 AEG is a fantastic option. Constructed from aluminium with 14mm CCW male threading at the tip, this 10.3-inch outer barrel is styled to match the profile of real 10.3" CQBR barrels and includes pin holes for mounting an M4/AR-15 front sight/gas block at the "carbine length" position. 

The 5KU 10.3" Aluminium Outer Barrel for M4/AR-15 AEG has the standard Tokyo Marui AEG outer barrel fitting at the rear, meaning it should fit the vast majority of M4/AR-15 platform AEGs but won't fit NGRS M4s or GBBRs. Whether you're shortening your barrel to a more CQB-friendly size or giving it a bit more length for more long-range effect, the 5KU 10.3" Aluminium Outer Barrel belongs on your M4 AEG!

A thread adaptor which allows the attachment of Silencers and Suppressors to WE Europe Pistols with internally threaded 11mm CW outer Barrels. This adapter provides a 14mm CCW male thread, ready for the most common tracer units and suppressors!

An Aluminium constructed outer barrel for M4/M15/M16 Airsoft Electric powered replicas which features a 14mm CCW thread and an extension piece to rapidly adapt between a CQB and Carbine length barrel.

A replacement outer barrel for M4/15/16 variants that is constructed entirely from a strong and durable Alloy.

The Novritsch SSP18 CNC TDC Outer Barrel is a great way to brighten up your SSP18 pistol! It comes in an array of colours and allows you to customise your pistol and make it unique to you. The outer barrel is constructed from CNC anodised aluminium, this creates an amazing finish and ensures that the product will be of the highest quality. This product is specifically designed for the Novritsch SSP18 and we can not guarantee fitment with any other Airsoft pistols.

The outer barrel features 14mm male CCW threading on the tip, this makes it ready for mounting most common muzzle devices. It also features a TDC screw so you can easily adjust your HOP-up without having to disassemble your pistol, all you need is a 1.5mm Hex-key!

A replacement Gas Tube for Airsoft AK models, constructed from Alloy to the original specification as a direct replacement. If you own an AK Model and need a replacement Gas Tube or are looking at making Handguard changes, you can't go wrong with a spare.

An adaptor for a Well MB sniper rifle, giving it a 14mm CCW thread for the attachment of muzzle devices.

A 76.2mm long barrel extension for any AEG with a 14mm CCW thread on its outer barrel.

Take your sniper to the next level and reduce those all-important decibels with a silencer adaptor. This aluminium constructed thread adaptor allows you to install muzzle devices such as suppressors and tracer units. Simply remove the barrel cap and replace it with this adaptor for a seamless transition to the muzzle device of your choice.

The adaptor provides a 14mm CCW thread to customise your replica, and is compatible with the MB-02 spring-powered Airsoft sniper rifles

A Steel constructed thread adapter for the AGM 002 series Spring-Powered Sniper Rifle, giving you a 14mm CCW Thread at the end of your barrel for the installation of standard Airsoft Suppressors with a matching thread. This is the perfect addition to anyone who wants to add a tactical look to their AGM 002, or conceal an extended inner barrel with a Suppressor.

If you're looking for a new outer barrel to make your M4/AR-15 AEG reach the moon, the 5KU 18" Aluminium Barrel for M4/AR-15 AEG is a fantastic option. Constructed from aluminium with 14mm CCW male threading at the tip, this 18-inch outer barrel includes pin holes for mounting an M4/AR-15 front sight/gas.

The 5KU 18" Aluminium Outer Barrel for M4/AR-15 AEG has the standard Tokyo Marui AEG outer barrel fitting at the rear, meaning it should fit the vast majority of M4/AR-15 platform AEGs but won't fit NGRS M4s or GBBRs. Whether you're extending your barrel for the improved long-range effect or you just want your Airsoft rifle to look massive and intimidating, the 5KU 18" Aluminium Outer Barrel belongs on your M4 AEG!

If you are working on a multifunctional platform, ready for both indoor and outdoor skirmishes, then this is it! The 5KU 11.5" Aluminium Outer Barrel For M4/AR-15 AEG is compatible with most M4/AR-15 AEGs and is constructed from aluminium for a perfect balance between low weight and high strength. 

The barrel is threaded at the tip with common 14mm CCW male threading, meaning you can mount the most common muzzle devices on the market with ease, including tracer units, suppressors and flash hiders in various styles. Also present are grooves in the underside to allow a gas block or M4/AR-15 triangular front iron sights to be mounted, though this is not essential. If you need your M4 to be ready for any situation then this will get you halfway there, but don't forget you'll need a matching inner barrel too! 

Want a suppressor on your MB series rifle? This is what you'll need. Made from Robust alloy and finished in matt black, this suppressor adaptor will allow you to add any 14mm CCW threaded accessory to your WELL MB series sniper rifle.

If you are rocking the Sig Air MPX and you are worried your battery will poke out of the handguard, worry no longer, Laylax have an innovative solution! The Handguard Battery Block for MPX AEG is designed to mount to the outer barrel using a grub screw and close the front end of the handguard up to stop your battery from hanging out when the SMG is pointed down. The block is constructed from aluminium with a matt black anodised finish and is styled to look like the gas block of the bigger MCX, meaning it shouldn't detract too much from the realistic looks of the MPX. This is why we love Laylax, they always come up with a nifty solution for these little niggles!

A Two-Piece Outer Barrel Assembly for AR/M4/M16 Platform Airsoft Replicas, constructed to a tough standard using Aluminium. The Two Piece design allows you run the barrel in a short configuration, ending just after the A-Frame Sight Post, or in it's longest configuration with the extension piece installed. Both sections of the Outer Barrel feature a 14mm CCW Thread for the installation of Suppressors, Tracer Units and other Muzzle Devices.

If you want to shorten your MCX down a bit or you are going for a slick integrally suppressed look for your next build this outer barrel from Laylax is just what you need. This barrel is 6.5 inches (17cm) in overall length and is constructed from aluminium for a perfect balance between low weight and strength.

At the tip of the barrel, we are treated to 14mm CCW male threading, allowing you to equip your MCX with a suppressor for sneaky duties. The tip of the barrel is wide enough to allow an inner barrel to pass straight through, meaning no need to mod it if you want to keep the original MCX inner barrel length. If installed on a standard MCX the barrel will be entirely beneath the handguard, allowing you to mount a tracer unit or suppressor without increasing the overall length of your setup and give your rifle the "Honey Badger" look. If you are adding a tracer make sure you get a shorter inner barrel as well!

A simple device yet effective, designed to protect your Airsoft gun's outer barrel threads from damage during gameplay and transportation, or any other situation which might leave the threads exposed to the elements.  

If you're looking for a new outer barrel to make your M4/AR-15 AEG poke into next week, the 5KU 20" Aluminium Barrel for M4/AR-15 AEG is a fantastic option. Constructed from aluminium with 14mm CCW male threading at the tip, this 20-inch outer barrel includes pin holes for mounting an M4/AR-15 front sight/gas.

The 5KU 20" Aluminium Outer Barrel for M4/AR-15 AEG has the standard Tokyo Marui AEG outer barrel fitting at the rear, meaning it should fit the vast majority of M4/AR-15 platform AEGs but won't fit NGRS M4s or GBBRs. Whether you're extending your barrel for the improved long-range effect or want your Airsoft rifle to also be effective at jousting, the 5KU 20" Aluminium Outer Barrel belongs on your M4 AEG!

If you are looking for a way to mount a tracer unit to your AEP, this is what you're after! The 20mm Upper Rail with Thread Adapter is designed to fit the CM.030, CM.127 and ASG XP17 Challenger AEP pistols, and provides both a 20mm Picatinny upper rail and 14mm CCW male threads so you can dress your AEP up to impress!

The part is constructed from alloy and is finished in matt black, and adds a whole new look to your AEP with its angled ports at the front on either side, and weight reduced 20mm rail across the top. Those worried about losing their iron sights; fear not! The rail has a set of fixed backup iron sights built in, so if you aren't quite ready for a red dot sight you can still put rounds on target.

Wan to bling out your VSR Bar 10? Treat your rifle with this 22.5-inch fluted barrel in your choice of either twisted or straight fluting, whichever would suit your loadout more. The PPSH barrel is constructed from extremely lightweight aluminium to help keep you light on your feet during skirmishes.

The fluting has been machined to a perfect uniformity that it sure to give your VSR/Bar-10 a sleek modern aesthetic. In real steel-rifles, fluting helps disperse heat from the barrel, as well as keep the barrel's weight down. At the end of the barrel is a 14mm female CCW thread for use with attaching tactical muzzle devices, such as flash hiders, suppressors and tracer units. Included is a thread cap if you don't fancy running any muzzle devices and like to keep things simple.

Wan to bling out your VSR Bar 10? Treat your rifle with this 22.5-inch fluted barrel in your choice of either twisted or straight fluting, whichever would suit your loadout more. The PPSH barrel is constructed from extremely lightweight aluminium to help keep you light on your feet during skirmishes.

The fluting has been machined to a perfect uniformity that it sure to give your VSR/Bar-10 a sleek modern aesthetic. In real steel-rifles, fluting helps disperse heat from the barrel, as well as keep the barrel's weight down. At the end of the barrel is a 14mm female CCW thread for use with attaching tactical muzzle devices, such as flash hiders, suppressors and tracer units. Included is a thread cap if you don't fancy running any muzzle devices and like to keep things simple.

A replacement Gas Block for LCT branded LCK47 models, which is made to the original specification from Steel as a replacement part.