King Arms MDT LSS M700 Tactical Gas Sniper Rifle

If you're a realism seeker after a sniper rifle, the King Arms MDT LSS M700 Tactical Gas Sniper Rifle is one to watch. A stunner of a full metal build with licensing from MDT for the LSS chassis and from CAA Tactical for the stock and cheek rest, this ultra-modern sniper rifle is at the cutting edge of precision rifle handling, ideal for any contemporary loadout.

Inside, the King Arms MDT LSS M700 finds its origins in the legendary Tanaka M700 system, the gas-powered sniper rifle system considered the cream of the crop by veteran Airsoft snipers. Being gas-powered means the bolt has no resistance when cocked, allowing you to stay concealed in the woods and avoid drawing the eye of the enemy team. An edge this build has over the original Tanaka is its GBB/VSR-style HOP-up bucking, giving you way more options in terms of upgrades.

The other massive advantages of the gas power source include a considerably longer inner barrel, a quieter muzzle report when suppressed and the built-in ability to adjust FPS from approximately 200 FPS on 0.20g BBs and standard pressure green gas right up to a healthy 410 FPS, a fantastic feature to tune FPS right to the site limits, with no significant disassembly or extra parts to buy. If you use higher-pressure gas, you can get even more velocity, but have your chronograph ready to make sure you don't go too far.

While it will be less consistent downrange than a properly built spring-powered sniper rifle, the MDT LSS M700 provides snipers with an authentic experience which cannot be matched by any springer. If you love a modern sniper rifle build and appreciate realism, you'll be in your element with the King Arms MDT LSS M700 Tactical Gas Sniper Rifle!

Starting at the front, we come to the lengthy 19-inch outer barrel, matching the real M700 profile perfectly with its tapered design. The barrel features fluting cuts along its entire length, designed to reduce weight and dissipate heat in real steel form. The fluting is a big part of the custom precision rifle look, and King Arms has replicated it flawlessly in this build.

Moving rearwards, we come to the chassis, a spot-on replica of the real MDT LSS Gen.1 Chassis, complete with realistic trademarks and made from aluminium for a robust yet agile feel. The front handguard area features a proprietary negative-space attachment system running along the bottom with a pre-installed 20mm Picatinny rail adapter. The negative space mounting system saves weight compared to legacy Picatinny rails, and the included rail adapter allows you to add a bipod for a more supported shooting position.

As we move back along the chassis, we can take note of the ergonomic join between the handguard section and the magazine well, in a perfect position to rest the support hand when shooting standing. Just make sure you don't rest your hand on the magazine, as this can cause damage to the feed lips if you're working the bolt rapidly, mad-minute-style.

Next up, we land at the receiver, made from aluminium with gorgeous, precisely engraved M700 trademarks on the left side. Up top, we have a 20mm Picatinny receiver rail ideally suited to two-part scope rings, complete with a cut-out in the centre, which allows for clean cartridge ejection in the real steel.

The TDC HOP-up adjuster is at the front of the receiver rail, allowing you to adjust for different ammo weights and tune your trajectory to be as flat as possible. A great feature of this King Arms build is its GBB/VSR-style HOP-up bucking, giving you far more upgrade options than the legacy Tanaka build.

At the rear of the receiver, we can find the bolt and handle, designed as a perfect match for the iconic sniper rifle everyone recognises, the Remington M700. The handle boasts texture on its surface to ensure you never slip off, though, being a gas bolt action, there is no resistance when cocking this bolt, so you won't need the texture quite as much as with a springer.

The safety lever is on the right side, just behind the bolt handle, allowing easy access from a firing grip with minimal movement and chance to alert the enemy team. With the safety pulled rearwards, the trigger will disconnect. With it pushed forward, you're ready to shoot.

The magazine release is just ahead of the trigger guard, a centrally positioned paddle release which is easily accessed from either side of the rifle. One thing to note about Tanaka-based gas sniper rifles is that they are not designed to have the magazine removed or inserted when the bolt is forward. To remove or insert the mag, first pull the bolt back to its rearmost position. With the bolt open, insert the mag and close the bolt. This is no bad thing if you like realism, as this is exactly how a real M700 rifle would be used.

The trigger guard is a squared-off, enlarged design, providing plenty of room for gloved fingers and keeping styling consistent with the cutting-edge aesthetic of the chassis overall. Behind the trigger guard, we have an M4A1/M16A2-style finger ridged pistol grip, known as the "A2" grip. While the A2 is the US military standard grip, you can swap it out for any GBBR or real steel compatible aftermarket grip for AR-15s.

Inside the trigger recess in the bottom of the stock, you can take note of the flat button between the magazine release and trigger. This is the bolt release catch, which allows you to remove the MDT LSS M700 bolt entirely for maintenance and to access its power adjustment feature. To remove the bolt, first, remove your magazine. Then, press the bolt release button down and hold it in place. With this done, you can pull the bolt straight out through the rear of the receiver. See the "Special Instructions" section below to learn about the PCS power-adjustable bolt.

At the rear of the LSS chassis, we are treated to a 6-position M4/AR-15 buffer tube, mounted to the chassis using a robust steel castle nut. The buffer tube is made from aluminium and allows you to adjust the stock to any of 6 length-of-pull positions for maximum shooter comfort.

The stock itself is a licensed replica of the real steel CAA Tactical CBS Buttstock, made from strong high-density polymer with a high-quality, textured finish. The CBS stock features 2 pairs of QD sling sockets, allowing a QD sling swivel to be fitted on either side for a highly versatile sling setup which can be removed in seconds. At the toe of the stock, we also have a conventional sling loop, ideal for standard strap-style slings. The adjustment lever is also extended, making it easier to reach when shooting in the prone position.

Mounted to the CBS stock, we have yet another licensed CAA Tactical component, known as the Adjustable Cheek Piece (ACP). The cheek piece can be raised and lowered by loosening the thumbscrew on the right side, adjusting its position to suit, then tightening the screw down to secure it.

This allows you to get a clear view through your optical sight, regardless of the height of your scope rings, and also encourages a consistent, comfortable shooting position. If you wear full face protection, you can also remove the cheek piece from the Picatinny interface on the right side of the stock. To do this, push the retention catch below the thumbscrew downward and hold it in place while you slide the cheek piece off.

If you love a challenging playstyle with a hefty, realistic rifle, you'll have a great time with the King Arms MDT LSS M700 Tactical Gas Sniper Rifle. Built like a tank with licensed trademarks and a butter-smooth gas bolt action, this is truly a joy to shoot!

Features

• Full metal construction
• Gas bolt action - Tanaka-based design, maximum realism!
• 14mm CCW Male threaded outer barrel - Tracer/suppressor ready
• Ghost ring aperture iron sights - Adjustable irons built-in, removable via screws
• Proprietary negative space attachment system - 1 x 20mm rail adapter included, ideal for a bipod
• 20mm Picatinny railed receiver - Designed for two-part scope rings, ready for a rifle scope
• Two-position trigger disconnect safety - Rear position = Safe, forward = Fire
• Ambidextrous magazine release - In front of the trigger guard, open the bolt & press to release the mag
• "A2" Finger-ridged pistol grip - The classic M4A1/M16A2 grip, compatible with GBBR/real steel AR-15 grips
• 6-Position M4/AR-15 buffer tube - Adjust the stock to suit your body type, fits M4/AR-15 sliding stocks
• Licensed CAA Collapsible Butt Stock (CBS) - QD Sling sockets built-in, extended adjustment lever
• Licensed CAA Adjustable Cheek Piece (ACP) - Adjust to align your eye with your optic
• Tanaka M700-based internal design - Potentially compatible with rare Tanaka parts
• TDC Adjustable HOP-up unit - External adjustment dial on the top rail
• PCS Adjustable power bolt - Adjust FPS using the dial on the underside of the bolt
• GBB/VSR-style HOP-up bucking - Plenty of HOP-up upgrade options
• Compatible with King Arms 25rnd Green Gas Magazines for M700 Bolt Action
• *Potentially* fits KJ Works & Tanaka M700 Green Gas Mags - No guarantees, we don't have one to test!

Package Includes

• King Arms MDT LSS M700 Tactical Gas Sniper Rifle
  • 25rnd Green Gas Magazine

Special Instructions

How to Adjust the PCS Bolt

The PCS bolt of the King Arms MDT LSS M700 can be adjusted through the magazine well or by removing the bolt entirely using the bolt release catch inside the trigger guard.

The PCS bolt offers FPS adjustment between approximately 200 FPS and 410 FPS using 0.20g BBs and standard-pressure green gas. Higher-pressure gases (red gas, VORSK V8, black gas, VORSK V12, etc.) will produce higher FPS results.

If you need a chronograph to measure and confirm FPS, you can find them here:Airsoft Chronographs

Use the following instructions to adjust FPS using the PCS Bolt:

• Loosen the grub screw to the rear of the gas route bucking
• With the grub screw fully loosened but not removed, turn the dial inside the recess behind the grub screw
• With the dial all the way to the front, you're in the lowest FPS setting. With it at the rear, you're at the maximum
• With your adjustment complete, retighten the grub screw and reinstall the bolt