Airsoft Outer Barrel and Parts

If you're decking out your MP7 and need a tracer or suppressor, check this out! The Airsoft Artisan 14mm CCW Thread Adapter for KWA/VFC/Umarex MP7 is made from steel, offering 14mm CCW male barrel threads, so you can make use of the most common tracer units and suppressors on the market.

This adapter works with both the KWA and VFC OEM Umarex MP7s, both AEG and GBB flavours, mounting to the 12mm CW male threads beneath the flash hider. If you're going silent with your MP7 but don't want to use the H&K QD Suppressor, this is the adapter you need!

Want to mount your favourite tracer or suppressor to your SSX23? The Novritsch SSX23 Thread Adapter lets you do just that! Designed for the Novritsch SSX23 but also compatible with the TM and ASG/STTI MK23, this adapter mounts to 16mm CW male barrel threads and provides 14mm CCW male threading, ready for the most common suppressors and tracers on the market.

The adapter is made from aluminium and includes a helpful knurled surface so you can mount it firmly but remove it easily when needed. If you have a specific suppressor in mind but it doesn't fit the SSX23/MK23 non-standard threads, this adapter will sort you out!

If you want stealthy styling for your SSG96 sniper rifle, this is the adapter you need! Constructed from aluminium and providing 14mm CCW male barrel threading at the tip, this suppressor adapter fits both the SSG96 MK1 and SSG96 MK2, allowing tracer units, suppressors or alternative muzzle devices to be mounted with ease.

To install the adapter, simply unscrew the front cap from your barrel and screw the adapter on in its place. You're now ready to go silent with your SSG96!

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

A one inch barrel extension for 14mm CCW threaded barrels, providing that little extra length should you wish to add a suppressor or tracer to your favourite RIF but can't because of a rail system being in the way.

A two inch barrel extension for 14mm CCW threaded barrels, providing that little extra length should you wish to add a suppressor or tracer to your favourite RIF but can't because of a rail system being in the way.

This Slong Airsoft Outer Barrel Extension; 87mm will sit on the end of your current 14mm outer barrel and provide 87mm of extra barrel length but keep the same male 14mm CCW threading which can make all the difference when trying to get the perfect muzzle device to sit just right on the end of your weapon. Alternatively, it is perfect for making your outer barrel ridiculously long, if you are trying to achieve one seriously mean-looking DMR.

This barrel extension is extremely useful for mounting tracer units and large suppressors where you previously couldn't.

A thread adaptor which allows the attachment of Silencers and Suppressors to WE Europe Pistols with internally threaded 11mm CW outer Barrels. This adapter provides a 14mm CCW male thread, ready for the most common tracer units and suppressors!

If you are working on your CQB build you must be looking for the shortest barrel out there, and right now, this is it! The 5KU 7" Aluminium Outer Barrel For M4/AR-15 AEG is compatible with most M4/AR-15 AEGs and is constructed from aluminium for a perfect balance between low weight and high strength. 

The barrel is threaded at the tip with common 14mm CCW male threading, meaning you can mount the most common muzzle devices on the market with ease, including tracer units, suppressors and flash hiders in various styles. Also present are grooves in the underside to allow a gas block or M4/AR-15 triangular front iron sights to be mounted, though this is not essential. If you need your M4 to be shorter this will get you halfway there, but don't forget you'll need a shorter inner barrel too! 

If you're looking for a new outer barrel to change up the length of your M4/AR-15 AEG, the 5KU 10.3" Aluminium Outer Barrel for M4/AR-15 AEG is a fantastic option. Constructed from aluminium with 14mm CCW male threading at the tip, this 10.3-inch outer barrel is styled to match the profile of real 10.3" CQBR barrels and includes pin holes for mounting an M4/AR-15 front sight/gas block at the "carbine length" position. 

The 5KU 10.3" Aluminium Outer Barrel for M4/AR-15 AEG has the standard Tokyo Marui AEG outer barrel fitting at the rear, meaning it should fit the vast majority of M4/AR-15 platform AEGs but won't fit NGRS M4s or GBBRs. Whether you're shortening your barrel to a more CQB-friendly size or giving it a bit more length for more long-range effect, the 5KU 10.3" Aluminium Outer Barrel belongs on your M4 AEG!

A replacement outer barrel for M4/15/16 variants that is constructed entirely from a strong and durable Alloy.

An Aluminium constructed outer barrel for M4/M15/M16 Airsoft Electric powered replicas which features a 14mm CCW thread and an extension piece to rapidly adapt between a CQB and Carbine length barrel.

An adaptor for a Well MB sniper rifle, giving it a 14mm CCW thread for the attachment of muzzle devices.

A 76.2mm long barrel extension for any AEG with a 14mm CCW thread on its outer barrel.

If you want sneaky styling for your CM.702 M24 or a tracer to light the enemy up, the CYMA Silencer Adapter for CM.702 M24 Sniper Rifle is what you need. This adapter replaces the front barrel cap, providing 14mm CCW male threads so you can mount the most common suppressors, tracer units and other muzzle devices on the Airsoft market. 

This outer barrel is a replacement original part for the Army Armament R601 JW3 GBB pistol but should also be compatible with other Army Armament Hi-capas and 1911 GBB pistols. The barrel is constructed from alloy and comes with 12mm CW female threads at the tip, leaving options open for adding a tracer unit or suppressor using a 14mm CCW male thread adapter (available separately). The barrel may also be suitable for other Hi-capa and 1911 pistols based on the original TM design but may require modifications to be made for smooth function.

The barrel is finished in bronze and has authentic-looking mock locking lugs across its upper surface, with "9x19" marked on the chamber area in recessed lettering. The barrel has a standard flared profile which tapers towards the chamber, matching the more common real steel Hi-capa barrels perfectly.

If you're looking for a new outer barrel to make your M4/AR-15 AEG perfect for woodland skirmishes, the 5KU 16" Aluminium Barrel for M4/AR-15 AEG is a fantastic option. Constructed from aluminium with 14mm CCW male threading at the tip, this 16-inch outer barrel includes pin holes for mounting an M4/AR-15 front sight/gas. 

The 5KU 16" Aluminium Outer Barrel for M4/AR-15 AEG has the standard Tokyo Marui AEG outer barrel fitting at the rear, meaning it should fit the vast majority of M4/AR-15 platform AEGs but won't fit NGRS M4s or GBBRs. Whether you're extending your barrel for the improved long-range effect or you just want your Airsoft rifle to look rather long and intimidating, the 5KU 16" Aluminium Outer Barrel belongs on your M4 AEG, Just remember to pick up a matching inner barrel!

If you're looking for a new outer barrel to make your M4/AR-15 AEG reach the moon, the 5KU 18" Aluminium Barrel for M4/AR-15 AEG is a fantastic option. Constructed from aluminium with 14mm CCW male threading at the tip, this 18-inch outer barrel includes pin holes for mounting an M4/AR-15 front sight/gas.

The 5KU 18" Aluminium Outer Barrel for M4/AR-15 AEG has the standard Tokyo Marui AEG outer barrel fitting at the rear, meaning it should fit the vast majority of M4/AR-15 platform AEGs but won't fit NGRS M4s or GBBRs. Whether you're extending your barrel for the improved long-range effect or you just want your Airsoft rifle to look massive and intimidating, the 5KU 18" Aluminium Outer Barrel belongs on your M4 AEG!

If you are working on a multifunctional platform, ready for both indoor and outdoor skirmishes, then this is it! The 5KU 11.5" Aluminium Outer Barrel For M4/AR-15 AEG is compatible with most M4/AR-15 AEGs and is constructed from aluminium for a perfect balance between low weight and high strength. 

The barrel is threaded at the tip with common 14mm CCW male threading, meaning you can mount the most common muzzle devices on the market with ease, including tracer units, suppressors and flash hiders in various styles. Also present are grooves in the underside to allow a gas block or M4/AR-15 triangular front iron sights to be mounted, though this is not essential. If you need your M4 to be ready for any situation then this will get you halfway there, but don't forget you'll need a matching inner barrel too! 

Take your sniper to the next level and reduce those all-important decibels with a silencer adaptor. This aluminium constructed thread adaptor allows you to install muzzle devices such as suppressors and tracer units. Simply remove the barrel cap and replace it with this adaptor for a seamless transition to the muzzle device of your choice.

The adaptor provides a 14mm CCW thread to customise your replica, and is compatible with the MB-02 spring-powered Airsoft sniper rifles

A Steel constructed thread adapter for the AGM 002 series Spring-Powered Sniper Rifle, giving you a 14mm CCW Thread at the end of your barrel for the installation of standard Airsoft Suppressors with a matching thread. This is the perfect addition to anyone who wants to add a tactical look to their AGM 002, or conceal an extended inner barrel with a Suppressor.

Want a suppressor on your MB series rifle? This is what you'll need. Made from Robust alloy and finished in matt black, this suppressor adaptor will allow you to add any 14mm CCW threaded accessory to your WELL MB series sniper rifle.

If you're building a Navy Seal style SMG-7 and need to mount a suppressor, the Airsoft Artisan 14mm CCW Thread Adapter for TM/WE SMG-7 GBB will sort you out! This thread adapter is constructed from steel, mounting to 12mm CCW male barrel threads and providing common 14mm CCW male barrel threads for mounting suppressors, tracer units and other muzzle devices. 

Compatibility-wise, this adapter is designed specifically for Tokyo Marui's SMG-7/PM7A1 GBB SMG and the WE SMG-7 & SMG-8 GBB. If you run one of these slick little subguns and fancy a change from the standard flash hider up front, the Airsoft Artisan 14mm CCW Thread Adapter for TM/WE SMG-7 GBB is what you need!

If you are working on your CQB build you must be looking for an extremely short outer barrel, and this one certainly is that! The 5KU 8.7" Aluminium Outer Barrel For M4/AR-15 AEG is compatible with most M4/AR-15 AEGs and is constructed from aluminium for a perfect balance between low weight and high strength. 

The barrel is threaded at the tip with common 14mm CCW male threading, meaning you can mount the most common muzzle devices on the market with ease, including tracer units, suppressors and flash hiders in various styles. Also present are grooves in the underside to allow a gas block or M4/AR-15 triangular front iron sights to be mounted, though this is not essential. If you need your M4 Airsoft rifle to be shorter this will get you halfway there, but don't forget you'll need a shorter inner barrel to match!

If you are building an M4 from the ground up or you want a new look for your M4/AR15 platform this 5KU Aluminium outer barrel is worth a look! This barrel is 14.5 inches in length, just like the standard carbine length M4 barrel but has a heavier profile towards the tip to simulate real-world heavy barrels which allow for more sustained fire before accuracy takes a dive due to heat build-up.

The barrel is constructed from two parts, the barrel itself and the barrel base which are secured together using a pair of steel grub screws. At the tip we have the Airsoft standard 14mm CCW male threading, leaving you with a wealth of options for what muzzle device you choose to mount. The profile of the barrel matches real M4 barrels throughout its length, making this a great choice as a replacement for those who don't like seeing what is clearly a skinny Airsoft barrel through the ports on their handguard. This barrel is designed for M4/AR15 AEGs and should fit the vast majority of them.

If you want your MCX build to stand out, the Airsoft Artisan 10" SUR300 Handguard, Suppressor & Outer Barrel for MCX Virtus will do the trick! This set includes a CNC aluminium wide-profile M-LOK handguard, a 7-inch aluminium outer barrel and an SRD762 suppressor replica, also machined from aluminium with flawless engraved markings. If you were umming and ahhing about how to deck out your MCX, this kit is a great all-in-one external upgrade!

The SUR300 is the .300 Blackout upper receiver set for the real MCX, offered as a kit to Military and Law Enforcement customers and also to civilians in a slightly longer form to keep the ATF happy. When built up, the SUR300 is absolutely beastly looking, a marriage of the menacing AAC Honey Badger's integrally suppressed aesthetic with the more modern receiver style of the MCX.

Being an Airsoft Artisan set, you better believe this is at the absolute pinnacle of Airsoft quality and well-suited to the equally gorgeous SigAir MCX Virtus. If you're into cutting edge modern platforms with a stealthy aesthetic, get the SUR300 Handguard, Suppressor & Outer Barrel belong on your MCX!

If you want your MCX build to stand out, the Airsoft Artisan 10" SUR300 Handguard, Suppressor & Outer Barrel for MCX Virtus will do the trick! This set includes a CNC aluminium wide-profile M-LOK handguard, a 7-inch aluminium outer barrel and an SRD762 suppressor replica, also machined from aluminium with flawless engraved markings. If you were umming and ahhing about how to deck out your MCX, this kit is a great all-in-one external upgrade!

The SUR300 is the .300 Blackout upper receiver set for the real MCX, offered as a kit to Military and Law Enforcement customers and also to civilians in a slightly longer form to keep the ATF happy. When built up, the SUR300 is absolutely beastly looking, a marriage of the menacing AAC Honey Badger's integrally suppressed aesthetic with the more modern receiver style of the MCX.

Being an Airsoft Artisan set, you better believe this is at the absolute pinnacle of Airsoft quality and well-suited to the equally gorgeous SigAir MCX Virtus. If you're into cutting edge modern platforms with a stealthy aesthetic, get the SUR300 Handguard, Suppressor & Outer Barrel belong on your MCX!