KWA QRF MOD.3 AEG 2.5

KWA
Code:
£319.99
  • Adjustable FPS
  • AEG 2.5 Gearbox
  • Pistol Calibre Receiver

The QRF Series just got a whole lot sexier! This awesome addition to KWA's line up features a Pistol Calibre Carbine design with a gorgeous Straight 9mm Magazine, as well as well-crafted external parts and exception performance thanks to the love and attention that has been paid to the internals. Whether you want it for it's stunning looks, the quality that comes with the KWA name, or it's ability to perform with the best whether it's indoors CQB or outdoors woodland play, the KWA QRF MOD.3 AEG 2.5 won't let you down.

Full description

Description

The QRF MOD.3 is built from high quality components, with a wobble free design and features an Anodised flash hider, Alloy receiver, handguard, outer barrel, and internals, with a polymer pistol grip, battery storage compartment and butt plate.

This Airsoft gun is powered by Electric, with a large battery storage compartment as part of the stock, allowing a wide range of batteries to be used, with support for large Ni-Mh and LiPo battery to be used. The gun fires in semi and fully automatic, with an impressive rate of fire, sure to send the enemy team running.

The magazine is straight, and is designed to look like the MP9 series of magazines, holding up to 85 rounds. As a Mid-Cap design, this magazine will feed until empty, with an elongated follower that will ensure every last BB is fired through the Gun. The weapon controls such as the magazine release, and bolt release are ambidextrous making it great for both left and right handed shooters, or for those who like to transition shoulders in tight CQB environments. The butt plate is flat to make shouldering the replica easier, and can be collapsed to two open positions and closed. The stock can be pulled to open, but will need the release button pressing to close it again. The Bolt-Lock can be operated for adjusting the HOP, but needs to be manually engaged by pulling the charging handle and lifting the bolt release.

The handguard of the replica features both MLOK panel slots, and 20mm RIS / RAS Rail panels allowing for a wide range of aftermarket attachments to be fitted. The gun also comes with two MLOK to 20mm Rail panels included allowing you to use all the same accessories you have used on your other Airsoft guns as well. The top of the replica features a full length 20mm RIS / RAS rail to allow even the largest sight and scope set ups to be used, with ample space for holographic and magnifier setups. A set of flip-up ironsights are included in the box, giving you the ability to use it accurately straight away.

The replica features an adjustable hop-up unit for range and accuracy, which can be quickly adjusted when accessed behind the mock bolt plate when the charging handle is to the rear. The hop-up unit adds range and accuracy to guns by adding a small amount of spin to the BB as it travels down the barrel to displace air, giving each round better stability to allow it to travel further. The adjuster is of a radial design, allowing more acculturate and concise adjustment allowing a wide range of BB weights to be used.

Internally the replica has KWA's stamp of quality, with their own modified V2 style gearbox, also known as the 2.5 AEG gearbox, which is designed with many advanced features not seen in other replicas. The gearbox features a quick change spring system, as well as a variable fps system, which are both easy to access and adjust. To adjust the FPS you simply unscrew the cover cap inside the battery storage compartment and then use the extended Allen key to adjust to requirement. If you push in and rotate the second cover the whole spring guide is released out the rear of the gearbox so the entire spring can be replaced in one go. The gearbox shell itself is reinforced to help prevent cracking under stress giving the gearbox shell a longer life, and features a cut out allowing you to install many aftermarket trigger board units. As standard with KWA, the standard parts are also high quality, with an impressive 18:1 gear set and 9mm ball bearings.

Features

  • High quality build by KWA
  • KWA AEG 2.5 V2 Based Gearbox
  • MLOK handguard
  • Pistol calibre AR style receiver
  • Airsoft 6mm BB Gun
  • 22'' / 26.75'' in length
  • 6.75'' outer barrel
  • Safe, Semi and Fully Automatic Firing Modes
  • Adjustable hop-up unit for range and accuracy
  • Two 20mm RIS / RAS MLOK Rail panels included
  • Ambidextrous magazine release
  • Ambidextrous mock bolt release
  • Switch Life Extender (SLE)
  • Ambidextrous Sling Plate
  • 85 round MP9 style straight magazine
  • PDW style three position sliding stock
  • Drop-in ready for electronic trigger systems
  • Adjustable fps with quick-change spring
  • Extended mock charging handle
  • PTS BUIS flip-up 20mm RIS / RAS iron sight pair
  • PTS Polymer Pistol Grip
  • Full top length 20mm RIS / RAS Rail
  • Removable 14mm CCW Flash Hider
  • Efficient Deans connector
  • In-line fuse system
  • Battery storage compartment in the stock
  • Mock gas block and tube
  • 18:1 Gearset
  • 9mm Ball Bearings
  • 184mm inner barrel
  • Reinforced gearbox shell
  • KWA warranty sealed gearbox
  • Branded:
    • 'SER. V200600510 US'
    • 'QRF MOD.3'
    • 'CAL.6MM'
    • 'KWA TML-6'
    • 'MANUFACTURED IN TAIWAN'
    • 'PTS'
    • 'KWA'

Package Includes

  • KWA QRF MOD.3 AEG 2.5
  • 85rnd Mid Cap Magazine
  • MLOK 20mm RIS / RAS Rail Panel x 2
  • PTS BUIS Flip-Up 20mm RIS / RAS Ironsight Pair
  • Extended Allen Key
  • Instruction Manual
  • Allen Key

Special Instructions

To lock the mock bolt plate back to adjust the hop up easily first pull the charging handle to the rear, then push the bolt catch upwards to catch. 

Before inserting an (empty) magazine always make sure that the follower is not sticking out, as this can cause damage on insertion. Only place loaded magazines into the gun, or if you're going to dry fire ensure you push down the follower before inserting it into the replica.

The externals of the replica are metal where they would be on the real world gun. This includes things like the outer barrel, handguard, and receiver. If a real world gun has polymer parts then the gun will still be marked as full metal externals, examples of this would be an M4, where the Stock and Pistol grip are always made from Polymer.

Specification

General

Weapon Construction External
Weapon Type
Assault Rifle, Submachine Gun,
Over 18 Only Icon
Over 18
Yes
Icon UKARA - United Kingdom Airsoft Retailer Association
Defence / UKARA Required
Yes, No,
FPS Icon
FPS (Feet Per Second), using 0.20g BB
Approx. 315fps ± 10%, using 0.20g BB
Site Legal Icon
Site Legal, using 0.20g BB
Yes
Package
Included Items
  • Magazine
  • Instruction Manual
Skill Level Icon
User Skill Level
Regular Player

Weight and Dimension

Weight KG Icon
Weight (KG)
Approx. 2.48kg
Weapon Length Collapsed
Length (Collapsed)
55cm
Weapon Length Extended
Length (Extended)
67cm

Construction

Colour Wheel Greyscale
Primary Colour
Black
Two Tone Icon
Pre Two-Toned
No
Construction Icon
Construction
Alloy receiver, hand guard, outer barrel, and internals, with a polymer pistol grip, battery storage compartment and butt plate
Weapon Construction External
External Construction
Polymer
Alloy
Gearbox Icon
Internal Construction
Polymer
Alloy

Weapon Specific

Power Source Icon
Powered By
Electric
Blowback Icon
Blowback
None
Weapon Platform
AR Platform, Submachine Gun, AR 9mm, Assault Rifle,
Magazine Style Icon
Magazine Style
AR 9mm
Fire Select Icon
Fire Selector
PatrolBase | Fire Select Safe
Safe
Patrol Base | Fire Select - Semi Automatic
Semi Automatic
Patrol Base | Full Automatic
Full Automatic
Weapon Safety Features Icon
Safety Features
Trigger Lock
Shooter Configuration Icon
Shooter Configuration
Ambidextrous
Weapon Configuration Icon
Weapon Configuration
Standard
Weapon Scale Icon
Weapon Scale
1:1
Suggested BB Weight
0.25g

Hop-Up

Hop-Up Unit Icon
Hop-Up Unit
Yes
Hop-Up Unit Adjuster Icon
Hop-Up Adjuster
Rotary
Hop-Up Unit Location Icon
Hop-Up Location
Behind dust cover when charging handle pulled to the rear

Furniture

Weapon Furniture Icon
Furniture
  • Railed Handguard
  • Flip-Up Ironsights
  • Railed Receiver
  • Ambidextrous Magazine Release
  • Sliding Stock
  • Ambidextrous Fire Selector
  • Ambidextrous Bolt Release
  • Threaded Outer Barrel
  • Ambidextrous Sling Plate
Rail System Icon
Rail System
20mm RIS / RAS , MLOK Rail System,
Icon Stock Positions
Stock Setting
Sliding
Weapon Length Extended
Stock Positions
3 Position
Sight Type Icon
Sight Type
Iron Sights
Sling Plate Icon
Sling Options
Buffer Plate

Barrel

Icon Thread Type
Outer Barrel Thread Type
Male
Icon Thread Direction
Outer Barrel Thread Direction
CCW (Counter Clockwise)
Outer Barrel Thread Size
14mm
Inner Barrel Length
184mm

Magazine Specific

Magazine Type
AEG
Magazine BB Capacity
Approx. 85 Rounds
Magazine BB Fill Method
Speed Loader
Magazine BB Fill Location
Top

Electric Gun Specific Information

Gearbox
Wiring Icon
Gearbox Wiring
Rear Wired
Battery Specific
Battery Connector
Patrol Base | Icon | Deans
Deans
Suggested Battery
Suggested Battery Type
Li-Po
Suggested Battery Configuration
Stick
Suggested Battery Voltage
7.4v

Product Testing Data

Notepad Icon
Test Description
315FPS
Notepad Icon
Tested Using
ASG Blaster 0.2g BBs
Notepad Icon
Test Date
21/04/21

Detailed Power Tests

FPS
FPS, using 0.20g BB
Approx. 315fps, using 0.20g BB

Related video

KWA QRF MOD.3 Livestream

Need ideas for something extra?

Like this Airsoft Gun? Check out these awesome Products!