RIS/RAS Rail & Attachments

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to Picatinny rail systems, locking with a grub screw on the top. These are much like standard rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to Picatinny rail systems, locking with a grub screw on the top. These are much like standard rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

A 20mm RIS lower mounted point designed to stop the operator of the weapons' hand from sliding forward in front of the barrel. 

If you're running a laser or flashlight with a 2.5mm jack, the PTS Syndicate Unity Tactical AXON-SL Pressure Switch; 2.5mm Plug will make your setup that bit slicker! Designed to mount to 20mm Picatinny rails and take up as little space as possible, the AXON-SL is perfect for compact platforms with little rail space to spare, measuring a mere 4cm end to end.

The set includes a silver 2.5mm plug and a gold 2.5mm plug, both of which are compatible with other plugs in the PTS Unity ecosystem. The switch itself is a single-button switch but can be operated in both momentary-on and constant-on modes. Simply half-press the switch for momentary-on and give it a full click for constant-on.

Designed with ergonomics in mind, the AXON-SL can also be used as a hand stop and works perfectly mounted to the 12 o'clock rail with the "thumb over bore" or "C-clamp" grip. Whether you want to give your primary the elite touch with a high-end, licensed pressure switch or you're fed up with standard switches dangling, getting snagged and failing when you need them, the PTS Syndicate Unity Tactical AXON-SL Pressure Switch; 2.5mm Plug will serve you well!

If you're running a laser or flashlight with a 2.5mm jack, the PTS Syndicate Unity Tactical AXON-SL Pressure Switch; 2.5mm Plug will make your setup that bit slicker! Designed to mount to 20mm Picatinny rails and take up as little space as possible, the AXON-SL is perfect for compact platforms with little rail space to spare, measuring a mere 4cm end to end.

The set includes a silver 2.5mm plug and a gold 2.5mm plug, both of which are compatible with other plugs in the PTS Unity ecosystem. The switch itself is a single-button switch but can be operated in both momentary-on and constant-on modes. Simply half-press the switch for momentary-on and give it a full click for constant-on.

Designed with ergonomics in mind, the AXON-SL can also be used as a hand stop and works perfectly mounted to the 12 o'clock rail with the "thumb over bore" or "C-clamp" grip. Whether you want to give your primary the elite touch with a high-end, licensed pressure switch or you're fed up with standard switches dangling, getting snagged and failing when you need them, the PTS Syndicate Unity Tactical AXON-SL Pressure Switch; 2.5mm Plug will serve you well!

If you're building out your AK to match the latest real steel builds, the 5KU Lightweight Zco Style AK Upper Handguard is an essential bit of kit. Based on the real steel Zco designs, this CNC 6061 aluminium upper handguard is designed to fit AK platforms with ZCO-style lower handguards and provides a 20mm Picatinny rail at 12 o'clock.

The Lightweight Zco Style Upper Handguard tips the scales at a minuscule 110g, meaning it won't slow you down in-game It comes with the steel mounting screws needed for attaching it to your ZCO-style lower. If your AK is due for a makeover, give it the modern touch it deserves with the 5KU Lightweight Zco Style AK Upper Handguard!

If you're looking for a replacement magnifier mount you're in luck! The Novritsch Flip Up Magnifier Mount fits magnifiers with a tube diameter of 30mm. when flipped up, it sits roughly 6cm above the rail, perfect for skirmishers with or without face masks. It is constructed from lightweight and durable aluminium, making it perfect for players who like to stay light on their feet but remain a threat at range.

To flip this sight, simply push on it and it will lock upright or to the side, this makes it fast and easy to adjust between long and close-range engagements. If you have a magnifier but are missing the mount, the Novritsch Flip Up Magnifier Mount - 30mm is for you!

If your MPX handguard is looking worse for wear, the SigAir M-LOK Handguard for MPX AEG is the fresh replacement you need! This is an original replacement part for the SigAir/VFC MPX AEG, the standard-length handguard which comes with the original SMG, constructed from CNC machined aluminium with a flawless finish.

M-LOK slots are present at the 3, 6, and 9 o'clock positions along with a short section of 20mm Picatinny rail up top, ready for your choice of accessories. Compatibility-wise, this part is specifically for the SigAir/VFC MPX AEG and probably won't work with other brands. If your beautiful MPX handguard has gained some battle wear and you want to restore it, this handguard will do the trick!

Have you treated yourself to a brand-new EMG 40mm MOSCART "HAVOC" 12" Grenade Launcher? Well, with this Spike's Tactical licensed conversion kit, you can turn it into a stand-alone launcher! It is compatible with the EMG "HAVOC" Launcher only, as it has been designed to accommodate the specific shape and size of that MOSCART launcher.

The "HAVOC" launcher slides onto the bottom section of the 20mm Picatinny rail, giving you the full top section for some tactical accessories like a scope or flashlight. The Chassis is compatible with real steel or GBBR pistol grips and buffer tube spacers/sling plates. The buffer tube is compatible with regular M4/AR-15 stocks so you can customise this conversion kit to make it unique to you!

It is constructed from a durable alloy to ensure it can survive skirmishing and the buffer tube simply threads into the chassis, just make sure you know what you're doing before installation as to avoid damaging anything! So, if you fancy turning your under-barrel launcher into a stand-alone platform for some close-quarters domination, the EMG KAOS Conversion Kit For HAVOC Grenade Launcher is perfect for you!

For those who use a pistol as a primary weapon; this would be perfect for your setup! The NUPROL NX400 hybridizes the NX300 tactical pistol flashlight with a red aiming laser which is fully adjustable and can be zeroed effectively thanks to the revised NX400 mount which is machined as part of the body and attaches to your rails using a robust steel thumb screw. The NX400 uses the same intuitive activation switch found on the NX300 and NX200 flashlights but has a spicier 400-lumen CREE LED and a red aiming laser which can be used together with the white light LED or on its own, with the white light locked off for more stealthy work.

The NX400 squeezes a lot of functionality into a compact package and would be perfect for an "offensive handgun" or primary pistol, but can also be used on rifles, and will be particularly well suited to those with a compact front end and limited rail space. 

A set of high profile mount rings for scopes up to 30mm wide, which attaches to a 20mm rail and provides a solid platform for you to use your optic.

If you've scratched up your CM.039's rail and you need a replacement, this is exactly what you need! The CYMA 20mm Picatinny Optics Mount for CM.039 AK AEG is a replacement original part for the CYMA CM.039 and CM.039C AEGs but unfortunately won't fit other AKs. The set includes the mounting bolts and the rail itself. 

A special mounting ring with three 20mm short rails on top and sides. Allowing additional accessories like lasers or lights to be attached.

A 20mm RIS compatible raised scope mount ring, designed to raise up optics to your eye-level, or fit larger scopes onto your Airsoft guns.

A 20mm mounted Russian tactical flashlight with an included pressure pad, designed to blind your enemies and provide you with the ultimate tactical illumination device to see you through your skirmish.

For those looking for the ultimate low profile pistol torch, stop searching! You've found it, powered by a single AAA battery you can dazzle your targets for hours without having excessive weight and bulk at the front of your Airsoft pistol.

The SR Q Furniture Set is a complete Grip/Stock set for AK Platform GBBs (Gas Blowback Guns), and will provide a gorgeous and futuristic all-in-one Pistol Grip and Stock, as well as a comfortable Foregrip to give your AK a sci-fi update! This kit is very easy to install, needing only your Stock and Pistol Grip to be removed, and is the perfect way to give your Airsoft Gun a modern update.

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount will sort that out! This mount is designed for old-school magnifiers which use a ring-style mount, offering compatibility with most 30mm tube magnifiers including the Vector Optics Flip To Side Magnifier.

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers theFAST Riser,FAST MRO Mount andFAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you're running face protection and don't want to ditch your magnifier, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount is what you need!

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount will sort that out! This mount is designed for old-school magnifiers which use a ring-style mount, offering compatibility with most 30mm tube magnifiers including the Vector Optics Flip To Side Magnifier.

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers theFAST Riser,FAST MRO Mount andFAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you're running face protection and don't want to ditch your magnifier, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount is what you need!

If you're rocking a Unity Fusion mount, the WADSN Offset Rail for Fusion Mounts should interest you! This CNC aluminium mount is compatible with Unity-style Fusion mounts and provides an offset 20mm Picatinny rail with 5 rail slots, ideal for flashlights and laser aiming modules. This rail mount is only compatible with Fusion style mounts and includes two steel bolts to mount it and the correct Allen key so you don't need to rummage in your toolbox!

If you are looking for a way to mount a tracer unit to your AEP, this is what you're after! The 20mm Upper Rail with Thread Adapter is designed to fit the CM.030, CM.127 and ASG XP17 Challenger AEP pistols, and provides both a 20mm Picatinny upper rail and 14mm CCW male threads so you can dress your AEP up to impress!

The part is constructed from alloy and is finished in matt black, and adds a whole new look to your AEP with its angled ports at the front on either side, and weight reduced 20mm rail across the top. Those worried about losing their iron sights; fear not! The rail has a set of fixed backup iron sights built in, so if you aren't quite ready for a red dot sight you can still put rounds on target.

If your AK is equipped with an ALFA-style lower handguard, this is the upper handguard you need to complete the build! The 5KU ALFA 20mm Picatinny Upper Handguard for AK ALFA Handguards is CNC machined from aluminium and provides a 20mm Picatinny rail up top, ready for a laser, flashlight or any other 20mm rail-mounted accessory. 

This upper handguard is designed specifically to be paired with the 5KU ALFA lower handguard, mounting via the threaded holes along each side. The set also includes the screws you'll need to bolt your new upper handguard to your ALFA lower handguard. If your ALFA style lower handguard is looking a bit lonely, add the 5KU ALFA 20mm Picatinny Upper Handguard for AK ALFA Handguards to complete the look!

If you want to add the elite look to your primary weapon but your local site bans lasers, the WADSN DBAL Mini style Tactical Flashlight was made with you in mind! This device is styled after the real steel DBAL Mini but instead of a laser, the device houses an ultra-bright tactical flashlight inside its front aperture.

The device offers several modes of operation, including low power mode for navigation and stroboscopic mode for distraction and disorientation, and mounts to your primary via a QD mount for 20mm Picatinny rails so you can easily switch between platforms without needing tools. The compact size of this unit makes it perfect for smaller SMGs and rifles, saving you rail space and offering similar functionality to a Scout tactical flashlight but with more modes to choose from and full compatibility with aftermarket 2.5mm pressure switches, dual pressure switches and hot buttons.

If you're building out your AK to match the latest real steel builds, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is essential. Based on real steel Zco-style red dot risers, this aluminium component fits replica Zco-style handguards such as the 5KU Lightweight Zco-style Lower Handguard. It will only attach to these styles of handguards due to the unique attachment interface.

Atop the riser is a section of 20mm Picatinny rail, perfect for mounting a red dot that matches the modern Russian design. If your modern Zco-style AK requires optic space for longer-range engagements, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is the piece of equipment for you.

The perfect way to securely mount your scope onto your Airsoft gun, allowing you to get the best possible accuracy from your scope when aiming. 

If you fancy turning your 9" "HAVOC" under barrel launcher into a stand-alone platform then this is the product for you! The EMG KAOS Conversion Kit provides the chassis for mounting a pistol grip and stock so you can carry your launcher as a powerful sidearm. It is compatible with the EMG 9" "HAVOC" Launcher only, as it has been designed to accommodate the specific shape and size of that MOSCART launcher.

The "HAVOC" launcher slides onto the bottom section of the 20mm Picatinny rail, giving you the full top section for some tactical accessories like a scope or flashlight, whatever looks the most menacing! The Chassis is compatible with real steel or GBBR pistol grips and buffer tube spacers/sling plates. The buffer tube is compatible with regular M4/AR-15 stocks so you can customise this conversion kit to make it unique to you!

The chassis and buffer tube are both constructed from durable alloy, sure to survive anything a skirmish has to throw at you. The buffer tube threads into the chassis, just make sure you know what you're doing before installation to avoid damaging anything. If you fancy a stand-alone launcher as a sidearm, the EMG KAOS Conversion Kit For 9" HAVOC Grenade is the easiest way to convert an under-barrel launcher into one!

If you're running a VZ.58 and want to add optics, lasers, flashlights and grips, the Ares CNC Aluminium 20mm Picatinny Handguard for VZ.58 AEG is what you need. Compatible with the Ares and Delta Armory VZ.58 AEGs, this handguard is made from CNC machined aluminium, giving it flawless machining and perfectly in-spec rails, ready for your mission essentials. 20mm Picatinny rails are present at the 3, 6, 9 & 12 o'clock positions with weight reduction ports in various places to keep your front end light and agile. 

Installation is relatively simple, requiring you to remove your existing handguard via the retention pin and replace it with this in the same way you would when installing your battery. Another perk of adding this RAS handguard is the ability to use an external battery box for more power on tap and easier battery changes. If you're going for the PMC look with your VZ.58, the Ares CNC Aluminium 20mm Picatinny Handguard for VZ.58 AEG is what you need to complete it!

If you want a striking new look for your AK, the 5KU CNC Aluminium MK3 M-LOK Chassis for CYMA AK AEGs will do the trick! This CNC aluminium chassis transforms the AK design, bringing it into line with more modern platforms with M-LOK slots, a lengthy 20mm Picatinny rail up top and a dynamic, angular look. 

Compatibility-wise, this kit is designed for CYMA AK AEGs of the CM.04x and Cm.05x series using the VFC external construction style. It may fit other VFC-style AKs but won't fit AKs based on the TM AK-47 AEG (CM.028, CM.5xx, CM.03x & JG AKs) nor will it fit AKS-74U AEGs. If your AK needs a 21st-century facelift to compete with modern designs, kit it out with the CNC Aluminium MK3 M-LOK Chassis for CYMA AK AEGs from 5KU!

If you're searching for a modern vertical foregrip with slick styling and flawless handling, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails is ideal. This vertical grip is available in two styles; short for those who like to use the "C-clamp" or thumb-over-bore grip and long for more traditional vertical grip holds. Each style includes grippy crackle texture on each side and linear serrations on the front, giving you ample traction without becoming uncomfortable without gloves.

The B5 mounts to 20mm Picatinny rails via its steel mounting apparatus and also includes a storage compartment inside, ideal for tactical snacks to keep energy high or accessory batteries for long-duration operations. If you want more control over your primary when sweeping rapidly between targets, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails will do the trick!

If you're searching for a modern vertical foregrip with slick styling and flawless handling, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails is ideal. This vertical grip is available in two styles; short for those who like to use the "C-clamp" or thumb-over-bore grip and long for more traditional vertical grip holds. Each style includes grippy crackle texture on each side and linear serrations on the front, giving you ample traction without becoming uncomfortable without gloves.

The B5 mounts to 20mm Picatinny rails via its steel mounting apparatus and also includes a storage compartment inside, ideal for tactical snacks to keep energy high or accessory batteries for long-duration operations. If you want more control over your primary when sweeping rapidly between targets, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails will do the trick!