Airsoft Mounts

If you need a backup red dot sight to run alongside your scope, the Vector Optics Red Dot Sight Offset 20mm Picatinny Mount will help! This offset red dot sight mount is designed for the Vector Optics TEK Frenzy micro RDS but also works with other micro red dot sights with the Docter footprint/mounting standard.

This mount is for 20mm Picatinny rails and presents your red dot sight at a 45-degree angle, allowing you to quickly rotate your primary to engage sudden, close-range threats. If you've ever missed a kill while adjusting your magnification, this mount paired with a micro red dot sight will stop that happening again!

If you want to dress your AK up with some shiny western optics you'll need a 20mm rail adapter! Thankfully, CYMA has this covered with the 20mm Picatinny Railed Scope Mount For AK Side Rail, offering a quick detachable mount with a 20mm Picatinny rail of approximately 13.5cm in length. This mount fits the AK-style side rail found on most AK-74 and AK-10x series AEGs and is constructed from alloy to provide the strength necessary for a reliable zero.

The QD lever and mounting bolt are constructed from steel and can be adjusted by loosening or tightening the bolt, making it easy to get a rock solid and wobble-free mounting interface with the vast majority of AK-type side rails out there. If you want your AK to run the same snazzy accessories your M4 does this adapter is ideal!

Not a fan of SMG-5 dioptre sights? I'm not sure how, but if they don't suit you then here's a way you can still shoot sharp with your SMG-5/MP5 AEG. Allows mounting of red dot sights and shorter length magnified optics. Looks extra cool with an MRDS on!

Can be fitted to Airsoft Weapons to lift up Sights and Scopes making them easier to use with Full Face Protection and other Masks. 

A quick-detach sling loop point and sling loop for KeyMod rail systems, allowing you to attach a sling to any point on a KeyMod system.

The QD Sling Swivel Adapter from 8Fields Tactical is intended to work with QD sling sockets to provide a quick swappable sling solution. The set includes a steel QD sling swivel and an extension strap with an elastic cover and a polymer buckle. To connect the adapter to your QD sling socket all you need to do is push the swivel into the socket, where it will lock in place. To remove it simply press the button at the centre of the swivel which will release it from the socket. With this sling adapter you have the choice, you can either mount your sling directly to the steel swivel or make use of the extension strap for a bit more flexibility.

The QD Sling Swivel Adapter from 8Fields Tactical is intended to work with QD sling sockets to provide a quick swappable sling solution. The set includes a steel QD sling swivel and an extension strap with an elastic cover and a polymer buckle. To connect the adapter to your QD sling socket all you need to do is push the swivel into the socket, where it will lock in place. To remove it simply press the button at the centre of the swivel which will release it from the socket. With this sling adapter you have the choice, you can either mount your sling directly to the steel swivel or make use of the extension strap for a bit more flexibility.

The QD Sling Swivel Adapter from 8Fields Tactical is intended to work with QD sling sockets to provide a quick swappable sling solution. The set includes a steel QD sling swivel and an extension strap with an elastic cover and a polymer buckle. To connect the adapter to your QD sling socket all you need to do is push the swivel into the socket, where it will lock in place. To remove it simply press the button at the centre of the swivel which will release it from the socket. With this sling adapter you have the choice, you can either mount your sling directly to the steel swivel or make use of the extension strap for a bit more flexibility.

The QD Sling Swivel Adapter from 8Fields Tactical is intended to work with QD sling sockets to provide a quick swappable sling solution. The set includes a steel QD sling swivel and an extension strap with an elastic cover and a polymer buckle. To connect the adapter to your QD sling socket all you need to do is push the swivel into the socket, where it will lock in place. To remove it simply press the button at the centre of the swivel which will release it from the socket. With this sling adapter you have the choice, you can either mount your sling directly to the steel swivel or make use of the extension strap for a bit more flexibility.

A steel-constructed sling plate designed to fit on Airsoft M4/15/16 AEG (Electric) Receiver.

If you are having a hard time seeing down your low-profile red dot sight, a rail riser will make all the difference! The Vector Optics 0.83" 20mm Picatinny Rail Riser Mount is designed to assist those who struggle to see down their red dot sight, either because of a very low profile mount, a full face mask or neck pain.

The riser offers a 4cm length of 20mm Picatinny rail raised 0.83"/2.2cm above the height of the original rail to which it is mounted. Being constructed from aluminium with a steel mounting bolt, this riser keeps added weight to an absolute minimum. Mounting the riser is as simple as mounting your red dot; simply align it with your rail and tighten down the thumb screw on the side. The centre of the riser is also milled out to provide a channel through which the iron sights on certain platforms can still be used which also helps with weight reduction.

If you are having a hard time getting your face low enough to see through your optic, this riser should solve that issue and get you shooting straight!

This High Profile Rail Riser is designed for any 20mm RIS/RAS Accessory, and is designed to lift it up off the Rail. This is particularly useful for those trying to use a Lower Face Mask with a Red Dot Sight, as you might find that you Mask stops you from aiming down your standard Rail System.

If you have QD sling sockets on your Airsoft rifle it would be rude not to take pure advantage and set your rifle up with a highly flexible sling setup which can be installed, altered and removed in mere seconds! 

This QD sling swivel from CYMA fits any QD sling socket and provides a wide "loop" style mount, to which a sling of practically any style can be mounted. To install the swivel onto a QD socket, simply push it into the socket and it will automatically lock in place. 

To disconnect the swivel all you need to do is press the button in the centre which will release the retention and disconnect the swivel from the socket on the rifle. This QD swivel can be rotated to any angle, guaranteeing the utmost comfort no matter which sling style you choose!

An Alloy constructed mount for the M14/M1A platform, which secures above the ejection port via the threads on the side of the receiver and allows you to mount 20mm compatible accessories/sights.

Not a fan of SMG-5 dioptre sights? I'm not sure how, but if they don't suit you then here's a way you can still shoot sharp with your SMG-5/MP5 AEG. Allows mounting of red dot sights and shorter length magnified optics. Looks extra cool with an MRDS on!

The AK series of rifles is famous for many things, but having the best iron sights is not one of them. The AK Rear Sight Rail For Red Dot Optics from 5KU replaces your AK's rear iron sight but retains basic functionality with its built-in emergency backup sights while providing the option to mount a red dot sight!

Designed specifically for Micro red dot sights, the 8 20mm Picatinny rail slots provide plenty of room for larger red dots but it would look rather silly. It's your AK though, make the purists cry if you feel like it!

The UNITY mounts are being favoured world wide due to their slim profile & efficient riser, making them an excellent candidate for using with PEQ / Laser pointers mounted on the upper rail.

If you're searching for a sling mounting solution for your M4/AR-15 AEG, the Delta Armory CQD Sling Plate for M4/AR-15 AEG is ideal. Constructed from steel for maximum strength, this CQD-style sling plate allows you to mount a single-point sling to either side of your sliding stock M4/AR-15 AEG, ideal for left or right-handed shooters. The plate can also be paired with a front sling point if you prefer a two-point sling. Compatibility-wise, this plate should fit any Marui-spec M4/AR-15 AEG with a sliding stock but won't work with fixed stocks or PDW stocks.

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer. Attached to M-LOK system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories.

The rail is a 20mm Picatinny type, measuring roughly 2.5 inches and is attached to M-LOK system using the included screws, nuts and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

If you have invested in a Tokyo Marui VSR-10 Pro and you want to add an optic, this 20mm receiver rail will do the trick! The Slong Airsoft Receiver 20mm Rail Mount For VSR-10 Sniper Rifle is designed to replace the rear iron sight on the Tokyo Marui VSR-10 Pro sniper rifle but can also be used to replace a worn-out rail on VSR-10 clones or the TM VSR-10 G-Spec sniper rifle.

The rail is constructed from aluminium and finished with matt black anodising, keeping the surface coating thin to ensure the rail remains in spec and capable of mounting any optical sight which fits 20mm Picatinny rails.

If you're looking for an M-LOK QD sling socket which is ergonomically designed and won't contort your sling, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice. Designed as an alternative to built-in QD sling sockets and standard flat sockets, when installed, this socket faces the shooter, resulting in a more comfortable sling position and less chance of tangles.

Constructed from high-density polymer with a steel QD cup, this socket should be compatible with most QD sling swivels on the market, allowing you to install or disconnect your sling quickly. Due to differences in tolerance between manufacturers, we suggest thoroughly testing this socket before entrusting it with any weight unless you're using it with a PTS-branded QD swivel. If you find the built-in QD sockets on your handguard are positioned suboptimally or don't have any QD sockets on your M-LOK handguard, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice!

A Quick Release Sling Loop for QD Sling Sockets, allowing you to install a Sling Loop that can be quickly released at the press of a button. This makes it ideal for handing your replica over for Chrono, or if you have multiple guns with QD sockets you can switch primaries in a hurry without taking your sling off!

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer.

Attached to Picatinny system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories.

The rail is a 20mm Picatinny type, measuring roughly 2.25 inches and is attached to Picatinny system using the included screws and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

Designed to broaden sling compatibility for any platform with any type of non-QD sling point, the EmersonGear Universal Sling Adaptor provides extra flexibility and allows even the smallest and most awkwardly shaped sling points to work with the most common slings on the market. If you're running a pistol with a lanyard loop, you can even use this adapter to give you more flexibility while keeping your pistol safely tethered to your belt.

Running an AR-36 and want to use the receiver sling point? Add the Universal Sling Adapter and you're ready to rock! Likewise, SMG-5 and SMG-7/MP7 sling points are a tad on the small side for standard "HK hook" type slings; with the Universal Sling Adapter, you get your primary slung with ease.

Even if you don't have a sling point on board, this adapter's versatile design allows you to loop it through vent ports on handguards, stocks and practically wherever you need it. You can even mount it to MOLLE loops and use it to store your car keys! One of the most underrated bits of kit we stock, the EmersonGear Universal Sling Adapter has about a million uses. Why not grab one just in case?

A set of two High Profile Scope Mount Rings, which will accept a 25mm Optic and easily install to 20mm RIS/RAS/Picatinny Rail Systems. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. Being a two-piece design, and coming included with an Allen Key, they are very easy to install.

A set of Two Scope Rings for 25mm Optics, which easily attach to 20mm RIS/RAS Rail Systems to install your Rifle Scope on an Airsoft Gun. They have a two piece design which makes installation very easy, and come included with an Allen Key to help. These rings are Low Profile, meaning your Scope will be mounted snugly to your Rail System.

If you are rocking the Novritsch SSP5 GBB pistol that thing isn't complete without a red dot sight! The Novritsch Premium Red Dot Plate for SSP5 GBB pistol is designed specifically for the SSP5 series and is constructed from CNC machined aluminium with an anodised finish. This red dot plate uses the Docter red dot sight footprint and should fit any micro red dot sight with the Docter footprint, including the Novritsch Red Dot Sight Premium V3. If you want to take pure advantage of the borderline insane performance of the SSP5 at long range, this plate is the key!

An Aluminium constructed Mount for Airsoft SVD and SVU Platform Rifles, which connects to the Dovetail Side Rail and provides a perfectly-aligned 20mm Rail on top of your Rifle, for the attachment of Sights and Scopes.

If you are having a hard time seeing down your low-profile red dot sight, this rail riser will make all the difference! The PJ 0.83" Mini Riser Block Mount is designed to assist those who struggle to see down their red dot sight, either because of a very low profile mount, a full face mask or neck pain.

The riser offers a 4cm length of 20mm Picatinny rail raised 0.83"/2.2cm above the height of the original rail to which it is mounted. Being constructed from aluminium with a steel mounting bolt, this riser keeps added weight to an absolute minimum. Mounting the riser is as simple as mounting your red dot; simply align it with your rail and tighten down the thumb screw on the side.

If you are having a hard time getting your face low enough to see through your optic, this riser should solve that issue and get you shooting straight

If you're always bending your neck awkwardly to look down sights, the Novritsch High Riser Mount for Red Dot Sights will cure that! This raised optic mount is patterned after real steel "Hydra" mounts, offering a raised mount for T1/T2 style red dot sights and a 20mm Picatinny rail for a PEQ/DBAL laser unit or scope camera. This mount is designed for 20mm Picatinny rails and includes a steel mounting bolt to secure it to your Airsoft platform's rail.

Constructed from CNC machined aluminium with a steel mounting bolt, this mount fits the Novritsch Red Dot Sight V3, Vector Optics Maverick and Maverick Gen II, Vortex Sparc Solar and Holosun 403B. It should also fit most T1 and T2 clones provided they correctly replicate the real Aimpoint Micro mounting standard. Being slightly higher than a standard T1 mount, the Novritsch High Riser Mount for Red Dot Sights is ideal for those who have a hard time getting a clear sight picture using full face protection, being designed in the real world for use with respirators and night vision devices. 

If you like to keep your smile pretty by wearing lower face or full face protection, the Novritsch High Riser Mount for Red Dot Sights will let you get on target without straining your neck