Airsoft Boneyard

These CYMA/EMG CM.102 SGR-12 Tri-Shot Shotguns found their way to the Boneyard due to generally poor quality control. These are brand new guns, unused and never shot but we can make no guarantees of proper functionality. As with all Boneyard items, these do not have a warranty and are sold as spare parts, wall hangers or props.

For a detailed product description and more specifications, click HERE to view the original product.

This suppressor once contained a tracer unit and had a tank for mist functionality, but these have both been removed. It is now just a stylish suppressor with a lack of bells and whistles, but it's ready to be the bell or whistle to add to your primary platform!

Some residue of mist fluid from its past days may be found internally, and slight cosmetic damage can be seen externally, but overall it is clean, gutted of its old internals and has a perfectly good thread ready to meet the one on the end of your barrel.

There are multiple of this item in stock - Please note that because of this there are differing external damage examples between them including slightly loose bases and cracked tracer caps etc..

This replica has found its way into our boneyard due being non-functional; we're not entirely sure what lead to this happening though out of the box, the included battery that is usually found with this replica is nowhere to be seen so a replacement would have to be sourced if you're interested in this boneyard.

Regardless, we found ourselves a spare battery to test though when plugging the battery in; no matter what fire mode we chose, the replica wouldn't shoot so this either may be a battery problem (where we picked up a dead battery) or there's something more problematic occurring; further investigation is required.

This is super cheap! It has a broken pump grip, but it can still be racked and cycles. You would need to fashion some sort of pump grip; maybe it could make an amazing master key. This is an absolute bargain, and is perfect for cosplay if you're not planning on turning it into some sort of crazy custom thing.

This replica has landed in our boneyard for unknown reasons - as far as things go, we cannot test for any sort of fault that this replica may or may not have due to the charger and battery being missing. Given this situation; if there is faults then ultimately this replica may be more suitable as a prop for cosplay or even a parts donor. Alongside this, the magazine is missing so a replacement should be sourced. The grip panel is also falling off so would require a bit of TLC to make it ideal as a prop.

This replica has landed in our boneyard for unknown issues - as far as things go, we cannot test this replica due to the battery and battery charger not being present so for this reason we cannot guarantee that the replica will turn up to you either functional or non-functional. Even then, this replica can happily serve as a prop or even as a parts donor.

This replica has landed in our boneyard for unknown issues - as far as things go, we cannot test this replica due to the battery and battery charger not being present so for this reason we cannot guarantee that the replica will turn up to you either functional or non-functional. Even then, this replica can happily serve as a prop or even as a parts donor.

This replica has found its way into our boneyard due to the magazine latch not being present - the entire latch alongside the spring is missing meaning the magazine may have fallen out during use as that isn't present either. Alongside these issues, the charger and battery are also missing so replacements are to be sourced if you're wanting to use this replica if it's functional which we cannot test given we have no battery to verify if there's any faults present. This replica may better suit being a parts donor given the already missing parts and uncertainty of functionality though could also be suitable as a prop for cosplay.

This replica has found its way into our boneyard for a few reasons - first of which is part of the housing that holds the spring for the external hammer has broken which means the slide cannot be secured in place since this is what holds the slide and frame together. Alongside this, the replica is missing its battery and charger meaning we cannot test for any faults and to see if the replica is functional so you'll have to prepare for this if you source replacements. If the replica is non-functional, it could work as a prop for cosplay or even be a parts donor if it is functional.

This replica has landed in our boneyard due to a few issues - first of which is that the tabs that secure the slide in place have snapped off completely meaning theres nothing to secure the slide and will fall off during use. Alongside this, it's missing its battery and battery charger so we cannot test its functionality so you could ultimately end up with a perfectly fine replica or something that needs some work doing to it internally. Apart from this; the replica used to be two-tone red but the paint was stripped - there is still residue red paint under the slide alongside in the serrations so this replica does need a bit of TLC.

This replica has found its way into our boneyard for unknown reasons - as far as things go; it's missing its magazine, battery and battery charger as well as being marked in places suggesting this was used for a skirmish and may have been returned for a reason that we cannot determine so there's a good likelihood of this replica not being functional but that doesn't stop it from being a perfect prop for cosplay or even as a parts donor.

This replica has landed in our boneyard for unknown reasons - as far as things go, we cannot test for any sort of fault that this replica may or may not have due to the charger and battery being missing. Given this situation; if there is faults then ultimately this replica may be more suitable as a prop for cosplay or even a parts donor.

This replica has landed in our boneyard due to a portion of the slide being chipped off - we're unsure how this has happened but ultimately doesn't affect functionality. Regarding function, we're unable to test for internal issues due to the battery and charger going missing so we cannot guarantee that the replica can actually shoot or has some weird electronic issue - if this is the case, this replica could ultimately serve as a parts donor or as some sort of prop.

This replica has found its way into our boneyard due to a few issues; first and foremost, the trigger seems to be broken as there's no spring tension - pulling the trigger all the way back whilst a battery is plugged in also provides nothing so whatever linkage/contacts are present is potentially also broken. The left side tab to keep the slide on the replica is broken as well though the right tab is still in one piece so you'll have to be careful when using this replica - keep in mind that you will need to source a battery and charger if you are wanting to use this replica since both are missing.

This replica has found its way into our boneyard due to the rear slide tabs breaking off completely - due to this fault, the slide freely comes off and isn't secure so you will have to replace the appropriate parts in order to bring this replica back to its former glory. Despite this, the replica is still fully functional when held together manually; firing at 235 FPS on .2 BBs. The charger and battery are also missing so these would have to be sourced in order to use this replica.

This Cybergun Rail Gun Series Colt 1911 CO2 Blowback Pistol is in the boneyard as it has both internal and external damage. The safety is snapped, and part of it is loose in the box. The hammer has sear issues and does not lock back when the pistol is racked. The magazine is also missing.

Other than the snapped safety, this pistol looks good externally and would make an excellent prop.

This replica has landed in our boneyard due to a few issues; the most concerning is when inspecting the battery connector, it appears to have melted/burned in some sort of fashion so this could mean a few things - most likely is that the electronics/mosfet is faulty and was drawing too much power. Alongside this issue, the magazine, charger and battery are also missing so these would also have to be sourced. We believe this replica would better suit being a prop for cosplay or something similar given the mentioned issues.

This replica has found its way into our boneyard for unknown reasons - as far as we're aware, the replica is fully functional and will happily fire on semi and full auto. Firing through our chronograph gave us an average of 220 FPS on .2 BBs. Do note a few things: The magazine is missing and a replacement would have to be sourced alongside a missing battery and battery charger. Using our own battery, we found it quite difficult to insert it into its slot so we advise caution not to damage your own battery by forcing it into position if you plan to use this replica for skirmishing.

This replica has landed in our boneyard due to apparently not being able to cycle - through our own testing however, the replica seems to be fully functional minus a slightly sluggish performance. Firing through our chronograph, we were seeing 200 FPS on .2 BBs so it's more than capable to be used during a skirmish. We will note that the magazine alongside the charger and battery are all missing so replacements will have to be sourced in order to use this replica.

This replica has landed in our boneyard due to supposed electrical issues - further inspection presents us with a replica that has a strong odor emitting from it, suggesting the internals may be burned out. We're reluctant to test the replica due to the damaged connector which also looks like it's discoloured, which makes us believe that the electronics have burned out and subsequently caused the wiring to warm up (which can kill/damage any battery connected). Ultimately this replica is usable as a wall hanger or as a prop provided these issues have ended up killing-off the replica - adding on that the magazine is nowhere to be seen alongside the charger and battery also not being present.

This replica has landed in our boneyard due to issues regarding the integrity of the internals - there is an odor resonating from the replica that is reminiscent of burned electronics. Despite this, the replica is still functional where its firing at 195 FPS on .2 BBs however it does sound somewhat sluggish. With this in mind, the replica is missing its charger and battery so these would have to be sourced if you're wanting a capable AEP platform.

This pistol has firing issues. Externally, this pistol looks of good quality. Internally, there are clearly some issues. When tested, the pistol needed to be racked every time it was shot; this indicates that something in the firing mechanism is not resetting properly. You would need to diagnose this; it could be an easy fix.

This sidearm has issues with its slide. A part has chipped off at the rear of the pistol, creating a sharp corner and making the slide a little difficult to reattach to the pistol. The slide lock has also gone walkies, so another one would be needed if you plan on running this pistol. A part of the pistol grip has also fallen off and would need regluing.

Find yourself a new slide and a new slide lock, and you're onto a winner here!

This replica has come to us in a dire state - to begin, the charging handle and the surrounding area on the bolt carrier has completely snapped off meaning this replica is unusable in its current state. The barrel lug that secures the barrel to the receiver also seems to have been broken so there's nothing really keeping the barrel in place. Due to these issues, this would suit being a display piece or a cosplay prop as the snapped portion of the charging handle is present in the box so a bit of gluing should make this replica look presentable again.

This shotgun is not in a good state. It would need a lot of love and knowledge to get it back to its former glory. However, it is a beautiful piece and is absolutely worth the effort to restore it if you have the skills and patience. 

Make sure to be careful when attempting any work on this platform, as the pump is jammed and there may be BBs loaded into the firing mechanism that may randomly fire.

This replica has come to us in a dire state - to begin, the charging handle and the surrounding area on the bolt carrier has completely snapped off meaning this replica is unusable in its current state. The barrel lug that secures the barrel to the receiver also seems to have been broken so there's nothing really keeping the barrel in place. Due to these issues, this would suit being a display piece or a cosplay prop since externally the replica is in decent condition.

This replica has found its way into our boneyard due to the bolt being snapped towards the top of the carrier. Due to this, we're reluctant to test the replica for its FPS alongside if it actually functions in case further damage is caused and the potential of the bolt carrier exploding causing injury. With this in mind; this replica would better suit being a prop for cosplay or even as a display piece if you have the space for it.

This pistol non non-functional as it is missing its firing pin. It is also missing its slide catch so the slide can and will slide straight off if you're not careful. This sidearm is pink two-tone, so you won't need a UKARA if you fancy this stylish pistol. It would be perfect for cosplay or a project gun if you fancy sourcing the parts.

This shotgun does not work. The CO2 housing and valve have snapped off and are separate in the box. We are unsure if there are replacement parts to fix this issue. This has left the replica non-functional, but it does make it the perfect wall hanger or prop, as the controls and racking system as still functional.

This shotgun was originally in the boneyard, as it has a snapped plate within its receiver. Upon inspection, there is a BB jammed in the firing mechanism, so the shotgun does not shoot, but can still be racked and cycle gas. You must be very careful when using/working on this gun, as the BB could be dislodged at any time.

Other than that, the platform seems to be in good shape; it could be an easy fix, and you could be onto a cheap skirmishable shotgun here if you put in the work.