- The ultimate modern Bullpup
- Serious challenger to the AR15
- Unparalleled ergonomics
We have all been drooling over the real Keltec RDB for years. The RDB is one of the most advanced bullpup rifles in existence and eliminates the hand full of downsides to bullpups that have people wandering around carrying rifles that are too long. It feels like a part of your body when you hold it, with extreme pointability due to the center of balance being around the middle of the receiver. With a steel receiver, high-density polymer parts, and a comfortable rubber buttplate, this AEG is nearly indistinguishable from the real thing, as we have come to expect from ARES.
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship worldwide, delivering not only to the UK but to most of the EU and select Worldwide locations as well. We provide a working day-by-road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
Approx.
UK Next Day
£8.95
Approx.
Highlands / Islands
£24.99*
Approx.
Saturday
£14.95
Approx.
* Scottish Highlands, Islands, and EU post prices can vary wildly. Prices range from £8.99 to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be delighted with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
Calling all bullpup fans! Sick of a heavy trigger pull? Tired of your fire selector either being under your arm or being only on one side? Sick of giant, inelegant plastic boxes calling themselves rifles? Wait until you get a look at the super-sleek RDB rifle from Ares, licensed by Keltec themselves.
Starting from the muzzle end we have a steel birdcage flash hider that conceals a 14mm CCW male threading, allowing you to swap it out for a suppressor or tracer. The outer barrel has a matt black finish and runs the entire length that the real rifle would, giving the RDB superb balance, just like the real thing. The handguard is constructed of high-density fiber-reinforced polymer and is solid as a rock. Ergonomically shaped and covered in futuristic square checkering, a firm hold over the RDB is assured. At the front of the handguard, there are two sling points molded in, one on each side. Across the bottom there is a polymer Picatinny rail, just in case you would rather use an aftermarket VFG or AFG, or maybe mount a grenade launcher! The battery is stored inside the handguard and can be accessed by removing the steel body pin above the pistol grip. Within there is plenty of room for a crane style 7.4v lipo.
The forward section of the upper receiver features a fully functional mock charging handle which can be swapped to either side. This part serves little function in Airsoft but it allows an HK-slap on steroids! Above this is a nice long Picatinny rail allowing you to mount PEQ boxes, tactical weapon lights, and optical sights. The rail is machined from aluminium and is both well machined and smooth, so it won't cut your hand accidentally! The pistol grip features an Ambidextrous fire selector with a remarkably short throw, meaning you can flip between fire modes much faster than a standard AR15. The trigger has texturing on the front surface, allowing you to trigger spam the enemy even with sweaty fingers. The grip itself has the same squared checkering as is present on the handguard (a Keltec trademark) and houses the tool to adjust the Hop.
As we move rearwards, the receiver of the rifle is visible beneath the polymer externals. This part is made from high-quality steel and has a glare-evading matt black finish. The stock and mag well area features 5, count'em, 5 sling mounting points. Two on either side of the receiver and a 5th on the rear top of the stock. The magazine catch is ambidextrous and is accessible with a slight rearward movement from a firing grip, allowing fast reloads rivaling the venerable AR15. On the underside of the stock we have the mag well, within which is the rotary hop-up, which is adjusted with the tool stored in the pistol grip. behind the mag well is the mock ejection port inside of which lies the gearbox! At the rear of the rifle we can find the rubber buttplate which helps ensure this rifle doesn't slip off your shoulder in the heat of battle!
When it comes to performance this rifle is as equipped to kill with BBs as it is with its looks. The RDB features an electronic trigger and MOSFET already installed, ensuring you get the most out of your chosen battery. The rate of fire on full auto is phenomenal, as is the trigger response on semi-auto. The trigger mechanism itself is unlike any other seen on a bullpup Airsoft rifle, with the usual trigger transfer bar being deleted entirely in favour of an electronic connection to the gearbox. This allows the trigger pull to be light and crisp, meaning double taps are a breeze with the RDB. Added to this already impressive feature set is the quick change spring system, accessible by removing the stock. This allows the user to swap the spring depending on what site they are attending, letting you squeeze the last few fps out of the rifle and run your RDB right on site limits. The RDB also comes with two magazines included, one long magazine and one short, how nice!
Go on! Join the 21st century with the Keltec RDB from ARES. With stunning looks, excellent ergonomics and phenomenal performance, this ultra-sleek modern bullpup will leave you wanting for nothing!
Features
- Steel Reciever
- Fully Ambidextrous
- Advanced Ergonomics
- 14mm CCW threads
- Rubber buttplate
- Very well balanced
- Quick change spring
- Almost points itself
- Takes AR15 and STANAG mags
- High-Grade polymer furniture
- Aluminium top Picatinny rail
- Innovation in the trigger mech
- MOSFET and ETU pre-installed
- Long inner barrel in a short package
- Ample battery space in handguard
Package Includes
- ARES Keltec RDB Rifle
- 130rd mid-cap mag
- 100rd shorty mid-cap mag
- Barrel cleaning and unjamming rod
- Loading tool
- Warranty card
Specification
General
|
Assault Rifle
|
---|---|
|
Yes
|
|
Yes,
No,
|
|
Yes
|
|
Yes
|
|
|
|
Regular Player, Experienced Player,
|
Weight and Dimension
|
Approx. 3.024kg
|
---|---|
|
70cm
|
|
70cm
|
Construction
|
Black,
Tan ,
Olive Green ,
|
---|---|
|
Black
|
|
No
|
|
Aluminium, steel and Polymer
|
|
Polymer
Aluminium
Steel
|
|
Polymer
Alloy
|
Weapon Specific
|
Electric
|
---|---|
|
None
|
|
Long Gun, Assault Rifle, Other Assault Rifles, Keltec RDB,
|
|
STANAG, Assault Rifle, M4 / AR Platform,
|
|
Safe
Semi Automatic
Full Automatic
|
|
Trigger Lock
|
|
Ambidextrous
|
|
Bullpup
|
|
1:1
|
|
0.2g
|
Hop-Up
|
Yes
|
---|---|
|
Rotary
|
|
Inside magazine well, adjusted via tool contained in pistol grip
|
Furniture
|
|
---|---|
|
20mm RIS / RAS
|
|
Fixed
|
|
1 Position
|
|
None
|
|
Loop
|
Barrel
Outer Barrel Length (in)
|
16''
|
---|---|
|
Male
|
|
CCW (Counter Clockwise)
|
|
14mm
|
|
430mm
|
Magazine Specific
|
Medium Capacity , AEG,
|
---|---|
|
Approx. 130 Rounds
|
|
Speed Loader
|
|
Top
|
Electric Gun Specific Information
Gearbox
|
Front Wired
|
---|---|
|
Yes
|
|
Yes
|
|
No
|
Motor
|
Standard
|
---|
Battery Specific
|
Deans
|
---|
Compatible Battery
|
Li-Po
|
---|---|
|
Crane
|
|
7.4v
|
Product Testing Data
|
330
|
---|
Size guide
Joule Charts
Special Instructions
These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.
FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.
Tap the tabs below to open the relevant chart for your replica.
This table should be used for reference, and cannot be used to check one weight against another, as the weight of the BB affects the power.
In order to check if the BB can be used with your replica chronograph using the weight you wish to use and then compare it against the table.
Every time you change weights you will need to re-chrono and check against the table. This is not a conversion chart between weights.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
325 | 0.98 | 1.23 | 1.37 | 1.47 | 1.57 | 1.77 | 1.96 | 2.11 | 2.21 | 2.45 |
328 | 1.00 | 1.25 | 1.40 | 1.50 | 1.60 | 1.80 | 2.00 | 2.15 | 2.25 | 2.50 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
335 | 1.04 | 1.30 | 1.46 | 1.56 | 1.67 | 1.88 | 2.09 | 2.24 | 2.35 | 2.61 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
345 | 1.11 | 1.38 | 1.55 | 1.66 | 1.77 | 1.99 | 2.21 | 2.38 | 2.49 | 2.76 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
355 | 1.17 | 1.46 | 1.64 | 1.76 | 1.87 | 2.11 | 2.34 | 2.52 | 2.63 | 2.93 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
420 | 1.64 | 2.05 | 2.29 | 2.46 | 2.62 | 2.95 | 3.28 | 3.52 | 3.69 | 4.10 |
430 | 1.72 | 2.15 | 2.40 | 2.58 | 2.75 | 3.09 | 3.44 | 3.69 | 3.86 | 4.29 |
440 | 1.80 | 2.25 | 2.52 | 2.70 | 2.88 | 3.24 | 3.60 | 3.87 | 4.05 | 4.50 |
450 | 1.88 | 2.35 | 2.63 | 2.82 | 3.01 | 3.39 | 3.76 | 4.04 | 4.23 | 4.70 |
460 | 1.97 | 2.46 | 2.75 | 2.95 | 3.15 | 3.54 | 3.93 | 4.23 | 4.42 | 4.91 |
470 | 2.05 | 2.57 | 2.87 | 3.08 | 3.28 | 3.69 | 4.10 | 4.41 | 4.62 | 5.13 |
480 | 2.14 | 2.68 | 3.00 | 3.21 | 3.42 | 3.85 | 4.28 | 4.60 | 4.82 | 5.35 |
490 | 2.23 | 2.79 | 3.12 | 3.35 | 3.57 | 4.02 | 4.46 | 4.80 | 5.02 | 5.58 |
500 | 2.32 | 2.90 | 3.25 | 3.48 | 3.72 | 4.18 | 4.65 | 4.99 | 5.23 | 5.81 |
510 | 2.42 | 3.02 | 3.38 | 3.62 | 3.87 | 4.35 | 4.83 | 5.20 | 5.44 | 6.04 |
Need ideas for something extra?
- 14mm CCW or 14mm CW threads
- "Brrrrt" markings - 40mm Diameter version
- Foam filled for slight sound dampening
If you want to give your primary a sneaky look, a suppressor will do the trick! The Specna Arms Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This suppressor is the 40mm diameter version, available in either 100mm or 150mm lengths; ideal for rifle and SMG builds.
This version of Specna's silencer is the 40mm "Brrrrt" version, marked with "BRRRRRRRRT" on the outside in stylised text with a wider diameter than the standard. This suppressor is ideal for A10 Warthog fans, minigun fans or anyone whose primary is appropriately fast!
- Check and dot pattern texture
- 150rnd Capacity
- For M4/AR15/SCAR-L/416 AEGs
For those of you looking for an ultra-modern styled mid cap, this is the one you're after!
Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.
The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.
- 1kg bulk bag
- Choice of BB Weights
- High quality - Great value!
For those of you who have a heavy trigger finger, LMG users, or the thrifty bargain hunter, we finally have a "cheap" BB which we can approve of! The ASG Cursed BBs are a high quality polished BB with absolutely no surface imperfections, seam lines, or injection pin marks, and despite this level of quality you can spray and pray all day long at this bargain price!
- 450rnd Capacity
- For M4/AR15 AEG Rifle
- Optimised for 416 style receiver
A recent magazine design that is optimized for the 416 style receiver, the NUPROL LS-Mag EXT Hi-Cap Magazine 450rnd is fully compatible with SCAR-L and M4/AR15 AEG replicas. The magazine holds 450 rounds and is filled via the top fill window. The magazine is constructed from high-density polymer with a steel feed spring, keeping the weight low but providing decent drop and scratch resistance.
The magazine design features strengthening ribs across its surfaces which also double as an area to grip when shooting your AEG in an unconventional stance. On the right side of the magazine body we can find markings indicating "30" next to a bullet symbol, and "Cal. 5.56x45" indicating the calibre of cartridge this style of magazine holds in the real firearm equivalent.
If you need more capacity, but don't want the rattle from carrying high capacity mags, this is what you'll need. With a respectable 200 round capacity, this magazine holds more than comparable mid-caps without being significantly larger than a standard M4/AR15 magazine, allowing it to fit into standard M4/AR15 mag pouches easily.
- Bottles or Bags
- 0.20g Standard BBs
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are standard 0.20g BBs which are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.
- Foam Filled
- Spring Core
- 14mm CCW / CW
An Alloy constructed Suppressor with Foam Baffles and a Spring Core for support. The end caps of the Suppressor can be unscrewed to access the internals. Designed for Airsoft replicas with a 14mm CCW or CW Thread, this Muzzle Device is the perfect accessory to conceal an Inner Barrel extension, or just to add a personal touch to your Airsoft Gun.
This suppressor has a clever feature which is that it has a 14mm CCW thread on one end and a 14mm CW thread on the other, as such it is compatible with both thread types.
- 350rnd Capacity
- Key/wheel wound high-cap magazine
- For Airsoft M4/AR15 AEG
If you have a need for big capacity but you don't want the added bulk of a drum mag, the 350rnd NW-Mag from NUPROL may be just what you're after! This magazine is constructed from polymer and is styled after a famous and popular style of real world polymer magazine. This magazine is a high capacity mag which uses a clockwork mechanism internally to feed BBs into your Airsoft M4/AR15 AEG, and can be wound either using the winding wheel on the baseplate of the magazine or alternatively using the included winding key. The winding key can be inserted into the shell on the left side, and allows the magazine to be wound up super quickly without wearing your fingers to the bone! Another plus is the low price of this magazine, as there are very few others on the market that can match the price: capacity ratio of the NW-Mag!
- 0.20g BIO BBs
- Bottles or Bags
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are BIO 0.20g BBs which are created from biodegradable materials so that they will gradually break down with time when exposed to natural environments. Touted as a more environmentally friendly BB, they are sometimes required by certain Airsoft sites to play.
This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.
- Aluminium construction
- Mounts to 14mm CCW male threads
- Internal foam baffles to reduce muzzle report
If you are looking for a sneaky aesthetic and reduced muzzle report, the Novritsch Rifle Suppressor will give you just that! This suppressor is constructed from aluminium and has internal baffles made from acoustic foam which will reduce the muzzle report of your primary and make you harder to locate.
The Novritsch Rifle Suppressor is compatible with any Airsoft gun which uses 14mm CCW male barrel threading and has an aggressive ported front end, providing some visual interest to the design which marks it out as something a bit different from the usual, boring tube suppressors.
On the inside, Novritsch has gone above and beyond, using 2 different sized baffles to muffle the muzzle report, widening at the end to prevent BBs from shattering inside and ruining that perfect shot. The front cap can also be removed, so if you want to change the filling to your own secret suppression formula, you are free to do so. Whether you are taking your sniper rifle build in a sneaky direction or you are creating an assault rifle with an emphasis on stealth, the Novritsch Rifle Suppressor is the perfect finishing touch!
Like this Airsoft Gun? Check out these awesome Products!
- £20 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- £10 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- Full metal construction
- Matt black with gold outer barrel
- Combat styled Hi-capa long boi
If your friends are using the R604, this pistol is the key to making them feel inadequate! Introducing the R608 Hi-capa Combat XL from Army Armament, a Hi-capa based pistol with a combat leaning, now in a new, lengthened flavour! The pistol combines the well liked aggressively stippled grips of the R604 and JW3 GBB pistols with a shorter dust cover and 5.5-inch outer barrel with extended slide; akin to the original "Silverballer" of the well-known man of hits video game but in a slightly more practical length!
- Full metal construction
- Functional De-cocking lever
- 20mm frame rail and 12mm female threaded barrel
If you are eyeing up a new sidearm but aren't up for the more common Hi-capa and EU series perhaps a classic Italian designed pistol would suit your tastes? Introducing the Raven R9 GBB, Raven's entry into the B9 series of Airsoft pistols. The real B9 was most famously issued to the US Army in the 1980s, replacing the venerable M1911.
- 1:1 Scale Replica
- Supreme build quality
- Beautiful licensed H&K trademarks
If you are after a DMR to match your UKSF loadout, you have found it. The Umarex HK417D AEG is a seriously well built and faithful replica of the HK417, chosen marksman's rifle for special forces all around the world. Put this down next to a real HK417 and you will be hard-pressed to pick out the right one for your Milsim skirmish!
- Textured Grip
- Decocking Lever
- Gas Blowback Pistol
A Gas Blowback 6mm BB Airsoft Pistol, based on the Sig Sauer P229 service pistol, used by U.S. Government Forces and more.
- Quick Change Spring
- Electric Blowback AEG
- Unique KeyMod Handguard
Built by Specna Arms as part of their G11 series of AR36 clone rifles, but this one has a difference. Not only does it have a non-standard KeyMod handguard, but also features an internal electronic blowback system which gives the AEG a more exiting firing experience with a bit of recoil for enhanced realism.
- MOSFET System
- POLYMER Version
- KeyMod Rail System
If you are looking for a skirmish-oriented primary which gives you all you need to cut through the hoards, the Wildhog has your name on it! The G&G CM16 Wildhog is the G&G Combat Machine reinvented with the superb G&G G2 gearbox and a programmable ETU which allows for burst mode, all housed in G&Gs rock solid polymer receiver with an updated shape and design to give it a slick, modern style. If you seek something robust with above-average performance and some slick advanced features, the Wildhog is the one!
- 6.03mm Tightbore inner barrel
- High density polymer construction
- Spenca's featherweight AR-9 offering
If your primary weighs a ton and you are looking for a lightweight alternative, the Specna Arms SA-FX01 is the ideal choice. This AR-9 style AEG is constructed from Spenca's fantastic high density polymer and is rocking the same internals as the established FLEX™ series, allowing it to tip the scales at a minuscule 1.8kg without compromising on in game performance or aesthetics.
The SA-FX01 is equipped with an M-LOK handguard featuring QD sling sockets straight out of the box, giving you a modern front end with wide accessory compatibility and a slick, cutting-edge look. The receiver is patterned after real steel "billet" AR receivers, blending perfectly with the M-LOK handguard while offering plenty of space to easily mount a scope or red dot sight for better effect on target. On the inside, things are equally impressive. A 6.03mm tightbore inner barrel provides the accuracy needed to send the enemy back to respawn, and a modern rotary HOP-up unit allows you to extend your range and tune for different ammo weights.
Whether you are fresh to Airsoft skirmishing or a veteran looking for a lightweight primary weapon option for enhanced mobility, the SA-FX01 brings full-fat AEG performance to the table with only slightly more mass than a beachball!
- Integrated optical sight
- Front 20mm RIS rail
- Bullpup configuration
Bullpup rifles, you either love 'em or you hate 'em. But assuming you've found your way to this page, we're guessing you're on team rear mag. This variant features a shorter barrel so the compact nature of the AUG is augmented further, giving you a long hidden inner barrel with a vastly reduced footprint when held against your person.
With an integrated scope and front para 20mm rail with pistol grip included, this variety of AUG is great for both CQB and longer range outdoor skirmishing alike, giving you the best of both worlds. With a sturdy and compact design, bullpup fans, you may have just found your new favourite primary.
- M-LOK Compatible
- Dynamic AK Platform
- Multiple Stock Variants
A 6mm BB Airsoft Electric Gun, based on the AK-102, and given a comprehensive overhaul, creating an Operator Platform that is incredibly dynamic.
- Tactical Appearance
- Alloy M-LOK Handguard
- Hi-tech Internal Enhancements
The Double Eagle M90 range presents an innovative & unique range of AR-15 / M4 Airsoft replicas to the market, offering an inimitable exterior build quality with advanced next-gen internals and adorned with the latest in modern firearm furniture, so get your NODS on, it's about to get operator AF up in here.
- Full Auto Version
- Gas Blowback Pistol
- Racoon City Police Ver
Yes it shoots full auto and yes it can be yours! This is the lavish and exuberant variant of the ever popular Biohazard series of Airsoft Pistols, featuring 'Racoon City Police' trademarks.
- Thread adaptor and rail
- Extended base plate
- Light enhancing sights
Army Armament have taken Airsoft 1911's to the next level, with a sweet array of advanced features.
The extended magazine and light enhancing ironsights as well as the textured grip and beavertail safety come together for a true operator's sidearm. With satisfying trigger response and recoil this 1911 is a modern twist on an iconic pistol.
- Square Ironsights
- CO2 Compatible
- Textured Grip
A Gas Blowback Airsoft Pistol built by WE Europe as part of their EU-Series Pistol Range, and is a faithful replica of the real world pistol it represents. The pistol features a Semi-Automatic Gas Blowback system, meaning that a Single Round is Discharged for every Trigger Pull and also Simulates Recoil for a more realistic experience.
This is the perfect sidearm for any Airsoft player, allowing you to quickly and effectively protect yourself from any threat should your main weapon go down or the enemy engage you in a CQB Environment.
- Full metal construction
- Modern AK support weapon
- Includes steel folding bipod
If you're an AK fan and you are looking for something bigger, the RPK is what you need! The CM.052A RPK-74M is a faithful replica of the latest variant of the RPK light support weapon, a lengthened and strengthened AK47 based design intended to provide a high volume of fire and increased accuracy at squad level. The CM.052A sports highly realistic construction with a plethora of steel parts, a full-sized dummy bolt carrier, a steel bipod and modern polymer furniture matching that which is currently issued to Russian armed forces. The RPK-74M takes standard AK47/74 AEG magazines, including drum mags, and comes with an extended 45 round style high cap magazine which holds a whopping 800 BBs!
- Revolver Grenade Launcher
- Can fire 6x MOSCARTs in rapid succession
- The ultimate Airsoft firepower!
If you need to bring some serious firepower to your next skirmish there are few platforms that can rival a 6-shot revolver grenade launcher! The NUPROL Matrix MGL can carry up to 6 40mm MOSCART grenade shells and unleash their payloads in under a second thanks to its revolver-like design, based on the real steel Milkor M32 MGL.
The Matrix is similar to other revolver grenade launchers we have seen in the past but with a few notable improvements. The outer barrel of the Matrix is constructed from aluminium and has a threaded tip, meaning more realistic handling, though we don't think there are any suppressors for this monstrously large thread!
The pistol grip of the original MGL has been replaced with a VFC QRS pistol grip, boasting enhanced ergonomics and crackle texture on each side for improved grip. The stock still mounts to the good old M4/AR-15 buffer tube, but the pre-installed stock on the Matrix is the VFC QRS stock, offering a snag-reducing A-frame style design with QD sling sockets on either side.
Whether you have vehicles to deal with in an upcoming Milsim skirmish or you simply want to be the badest bunker buster on the field, the NUPROL Matrix MGL will equip you to clear the enemy out of any emplacement like a bad fart clears a room!
- Full metal construction
- 6.01mm Steel tightbore inner barrel
- An AK dressed for 21st century combat
If you are a fan of the AK platform but want something that can be equipped like a modern AR, the ARCTURUS AK74 TWS M-LOK Carbine should satisfy your needs! This AK is built like a tank, much like ARCTURUS's other AK offerings, but is equipped with a 20mm railed receiver cover and M-LOK/Picatinny hybrid handguard to allow a wide range of modern western accessories to be mounted seamlessly, with no need for adapters or improvised solutions.
On the inside, we are equally well equipped with the AK74 TWS. This AEG has a 6.01mm steel tightbore inner barrel, a modern rotary style AK HOP-up unit and some well chosen internal upgrades focussing on reducing friction and improving the efficiency of the system, and the result is impressive performance with little to go wrong. Those after an AK that can do everything an AR can, this one is for you!